Final Report on the Safety Assessment of Polyethylene1

Laccase driven biocatalytic oxidation to reduce polymeric surface hydrophobicity: An effective pre-treatment strategy to enhance biofilm mediated degradation of polyethylene and polycarbonate plastics

Plastic pollution is a major global environmental issue due to its structural complexity and poor biodegradability. Biological approaches are appropriate due to cost effectiveness and environmental friendliness, however effective polymer degradation is still in its infancy. As biological treatments are slower than physical and chemical approaches, they could be applied in conjunction with pre-treatment techniques such as photo-oxidation, heat treatment, and chemical treatments. But these processes lead to high energy consumption and hazardous secondary pollution. To address these concerns, an enzymatic pre-treatment strategy has been proposed in this study, with an aim of promoting surface oxidation on the plastics leading to improved hydrophilicity. This in turn, facilitates the surface attachment of microbes, ultimately, accelerating biodegradation. Scanning Electron Microscopy (SEM) and Fourier Transform Infrared (FT-IR) spectroscopy analyses confirmed the surface oxidation of the polyethylene (PE) and polycarbonate (PC) plastics mediated by the action of laccase enzyme. Contact angle measurement witnessed the increased hydrophilicity of the treated plastics. Following, a potential biofilm forming microbial consortium has been employed for the biodegradation of enzyme treated plastics. SEM analysis indicated the increased formation of corrosive pits and surface aberrations on the enzymatically pre-treated plastics and Confocal Laser Scanning microscopy (CLSM) analysis exhibited the enhanced biofilm formation and exopolysaccharide deposition on the pre-treated PE and PC. In addition, X-ray photoelectron spectroscopy (XPS) revealed the reduction in the elemental composition of carbon with an increment in the oxygen composition of plastics. Gel permeation chromatography (GPC) further confirmed the greater reduction in the molecular weights of the plastics subjected to integrated enzymatic and biofilm treatment than only biofilm treated plastics. This is the first report on the integration of enzymatic pre-treatment with the biofilm mediated microbial degradation to achieve enhanced treatment of plastics which demonstrated to be a promising technology for the effective mitigation of plastic pollution.

Identification of a metabolite for the detection of the hydrophilic drug diisopropylamine for doping control

Diisopropylamine (DIPA), a hydrophilic chemical compound, is used as an intravenous antihypertensive agent. DIPA is prohibited for use in the horse racing industry due to its performance enhancing effects. A cyano (CN) hydrophilic interaction liquid chromatography (HILIC) column was used for the separation of DIPA from its metabolite. Ammonium formate was added to the mobile phase to increase the ionization of the basic substance. The metabolite was identified as an N-oxidized metabolite of DIPA, which eluted earlier than the parent drug and was less polar on the HILIC column. The main finding of the study was the identification of a metabolite with a mass shift of 15.9944. The in vitro experiment showed that the metabolite was produced as a result of N-oxidation processes, mainly mediated by flavin-containing monooxygenase (FMO). Methimazole was used to inhibit the FMO enzyme-mediated N-oxidation metabolism and metabolite production in a concentration-dependent manner. The metabolite was confirmed to be present in an actual horse urine sample that tested positive for DIPA. This study demonstrated that the metabolite could be screened using in vitro samples and their presence corresponded to a positive result in actual samples. This metabolite screening could therefore find application as a flexible way to test for new and modified banned substances in the racing industry.

Unlocking the Hidden Potential of Cosmetics Waste for Building Sustainable Green Pavements in the Future: A Case Study of Discarded Lipsticks

This investigation is dedicated to unlocking the hidden potential of discarded cosmetics towards building green sustainable road pavements in the future. It is particularly aiming at exploring waste lipstick (WLS) as a high-quality functional additive for advanced asphalt mix technologies. To fuel this novel innovation, the effect of various WLS doses (e.g., 5, 10, and 15 wt.%) on the performance of base AP-5 asphalt cement was studied in detail. A wide array of cutting-edge analytical lab techniques was employed to inspect in-depth the physicochemical, microstructural, thermo-morphological, and rheological properties of resultant admixtures including: elemental analysis, Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thin-layer chromatography-flame ionization detection (TLC-FID), scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), needle penetration, ring and ball softening point, Brookfield viscometer, ductility, and dynamic shear rheometer (DSR) tests. Unlike the unstable response of asphaltenes, the additive/artificial aging treatments increased the fraction of resins the most, and decreased that of aromatics; however, asphaltenes did not impair the saturates portion, according to Iatroscan research. FT-IR scan divulged that the WLS-asphalt interaction was physical rather than chemical. XRD diagnosis not only revealed an obvious correlation between the asphaltenes content and the fresh-binder crystallinity but also revealed the presence of fillers in the WLS, which may generate outstanding technical qualities to bituminous mixes. According to AFM/SEM analyses, the stepwise incorporation of WLS grew the magnitude of the "bee-shaped" microstructures and extended the roughness rate of unaged/aged binders. The prolonged consumption of the high thermal-stable additive caused a remarkable drop in the onset degradation and glass transition temperature of mixtures, thus enhancing their workability and low-temperature performance, according to TGA/DTGA/DSC data. The DSR and empirical rheological experiments demonstrated that the WLS could effectively lower the manufacturing and compaction temperatures of asphalt mixes and impart them with valuable anti-aging/fatigue-cracking assets. In a nutshell, the use of waste lipstick as an asphalt modifier is viable and cost-effective and could attenuate the pollution arisen from the beauty sector, while improving the performance of hot/warm asphalt mixes (HAM/WAM) and extending the service life of roadways.

A fluid-powered refillable origami heart pouch for minimally invasive delivery of cell therapies in rats and pigs

BACKGROUND

Cardiac repair after heart injury remains a big challenge and current drug delivery to the heart is suboptimal. Repeated dosing of therapeutics is difficult due to the invasive nature of such procedures.

METHODS

We developed a fluid-driven heart pouch with a memory-shaped microfabricated lattice structure inspired by origami. The origami structure allowed minimally invasive delivery of the pouch to the heart with two small incisions and can be refilled multiple times with the therapeutic of choice.

FINDINGS

We tested the pouch's ability to deliver mesenchymal stem cells (MSCs) in a rodent model of acute myocardial infarction and demonstrated the feasibility of minimally invasive delivery in a swine model. The pouch's semi-permeable membrane successfully protected delivered cells from their surroundings, maintaining their viability while releasing paracrine factors to the infarcted site for cardiac repair.

CONCLUSIONS

In summary, we developed a fluid-driven heart pouch with a memory-shaped microfabricated lattice structure inspired by origami. The origami structure allowed minimally invasive delivery of the pouch to the heart with two small incisions and can be refilled with the therapeutic of choice.

Micro(nano)plastics as an emerging risk factor to the health of amphibian: A scientometric and systematic review

Although the toxicity of microplastics (MPs) and nanoplastics (NPs) is recognized at different trophic levels, our know-how about their effects on amphibians is limited. Thus, we present and discuss the current state on studies involving amphibians and plastic particles, based on a broad approach to studies published in the last 5 years. To search for the articles, the ISI Web of Science, ScienceDirect, and Scopus databases were consulted, using different descriptors related to the topic of study. After the systematic search, we identified 848 publications. Of these, 12 studies addressed the relationship "plastic particles and amphibians" (7 studies developed in the laboratory and 5 field studies). The scientometric analysis points to geographic concentration of studies in Brazil and China; low investment in research in the area, and limited participation of international authors in the studies carried out. In the systematic approach, we confirm the scarcity of available data on the toxicity of plastic particles in amphibians; we observed a concentration of studies in the Anura order, only one study explored the toxicological effects of NPs and polystyrene and polyethylene are the most studied plastic types. Moreover, the laboratory tested concentrations are distant from those of the environmentally relevant; and little is known about the mechanisms of action of NPs/MPs involved in the identified (eco)toxicological effects. Thus, we strongly recommend more investments in this area, given the ubiquitous nature of NPs/MPs in aquatic environments and their possible consequences on the dynamics, reproduction, and survival of species in the natural environment.

Ecotoxicological Assessment of Microplastics in Freshwater Sources—A Review

High living standards and a comfortable modern way of life are related to an increased usage of various plastic products, yielding eventually the generation of an increased amount of plastic debris in the environment. A special concern is on microplastics (MPs), recently classified as contaminants of emerging concern (CECs). This review focuses on MPs’ adverse effects on the environment based on their bioactivity. Hence, the main topic covered is MPs’ ecotoxicity on various aquatic (micro)organisms such as bacteria, algae, daphnids, and fish. The cumulative toxic effects caused by MPs and adsorbed organic/inorganic pollutants are presented and critically discussed. Since MPs’ bioactivity, including ecotoxicity, is strongly influenced by their properties (e.g., types, size, shapes), the most common classification of MPs types present in freshwater are provided, along with their main characteristics. The review includes also the sources of MPs discharge in the environment and the currently available characterization methods for monitoring MPs, including identification and quantification, to obtain a broader insight into the complex problem caused by the presence of MPs in the environment.

Bioplastic Production from Microalgae: A Review

Plastic waste production around the world is increasing, which leads to global plastic waste pollution. The need for an innovative solution to reduce this pollution is inevitable. Increased recycling of plastic waste alone is not a comprehensive solution. Furthermore, decreasing fossil-based plastic usage is an important aspect of sustainability. As an alternative to fossil-based plastics in the market, bio-based plastics are gaining in popularity. According to the studies conducted, products with similar performance characteristics can be obtained using biological feedstocks instead of fossil-based sources. In particular, bioplastic production from microalgae is a new opportunity to be explored and further improved. The aim of this study is to determine the current state of bioplastic production technologies from microalgae species and reveal possible optimization opportunities in the process and application areas. Therefore, the species used as resources for bioplastic production, the microalgae cultivation methods and bioplastic material production methods from microalgae were summarized.

Impact of polyvinyl chloride, polystyrene, and polyethylene on the organism of mice

Goods of plastic, due to their durability, universality and economical properties are broadly used in all spheres of life. On the whole, polymers are inert and nontoxic, but in the process of their production, various additives are used, which on contact or introduction into an organism has a negative effect on it. In our study, we determined the impact of some types of plastic (polyvinyl chloride, polysterene and polyethylene) on the organism of laboratory animals according to changes in their body weight, indices of mass of the internal organs, and blood parameters. For the experiment, we formed four groups of white male mice at the age of 3 weeks and average body weight of 50 g. For each group, we used different litter. For group I, the litter was sawdust; and for the other groups we added plastic products in different volumes to the sawdust; for group II finely cut polyvinyl chloride, for group III cut polyethylene, and for group IV granules of polystyrene. Every 3 days, we determined the body weight of the animals, and 32 days later we determined mass of the organs, clinical and biochemical parameters of the blood. Addition of polyvinyl chloride, polyethylene, and polystyrene into the substrate for mice did not have a significant effect on tempi of growth of body weight, and also relative mass of heart and lungs. Polyvinyl chloride and polystyrene have an immune-suppressive effect, and polyvinyl chloride affects both central and peripheral organs, and polystyrene mostly harms the peripheral organs. All used types of plastic cause leukocytopenia, following which neutrophilia of band neutrophils and monocytosis takes place as a result of damage to the biological barriers. We determined the systemic toxic effect of the studied types of plastic on the internal organs, which manifested in increase in their mass (liver, kidneys), steep increase in the activity of liver enzymes (AST, ALT), simultaneous decrease in activity of alkaline phosphatase and content of cholysterol and glucose in the blood serum of the mice. Also polyvinyl chlorine, polyethylene and polystyrene cause degeneration of the epithelium of the uriniferous tubule, which is manifested in reduction of globulins and creatinine in the blood of animals from the experimental groups following increase in relative mass of the kidneys. The results of our research allow us to state that different types of plastic can cause toxic effect on animals, as well as people who are in frequent contact with them.

Preservation of the temporal muscle during the frontotemporoparietal approach for decompressive craniectomy: technical note

BACKGROUND

In patients undergoing decompressive craniectomy, resection and detachment of the temporal muscle produces esthetic and functional damage, due to atrophy of the frontal portion of the temporal muscle in the temporal fossa. We have performed en-block temporal muscle detachment in decompressive craniectomy patients to avoid esthetic and functional damage to the temporal muscle.

METHODS

Twenty-one patients underwent decompressive craniectomy using a frontotemporoparietal approach. Through a three-leaf clover flap skin incision, the temporal muscle was detached en-block and overturned antero-inferiorly conjoined with the frontal myocutaneous flap. A decompressive craniectomy and duraplasty were performed. A polyethylene sheet was added to prevent adherence of the temporal muscle to the dura mater.

RESULTS

The decompressive craniectomy was effective in all patients. When subsequent cranioplasty was performed, the temporal muscle was easily repositioned. No complications resulted from the en-block temporal muscle detachment or the use of the polyethylene sheet. In 18 patients eligible for clinical and radiological follow-up, excellent (n = 4) or good (n = 14) esthetic results were detected. Chewing ability is considered normal by all patients.

CONCLUSION

Although it requires that the patient undergo two surgical procedures, en-block detachment of the temporal muscle during decompressive craniectomy allows good esthetic and functional results.