Application of statistical experimental design to optimize the photocatalytic degradation of a thiazin dye using silver ion-doped titanium dioxide

Production of the 2,5-Furandicarboxylic Acid Bio-Monomer From 5-Hydroxymethylfurfural Over a Molybdenum-Vanadium Oxide Catalyst

2, 5-Furandicarboxylic acid (FDCA) is an important bio-monomer that can potentially replace terephthalic acid to synthesize degradable polyesters. Efficient selective oxidation of biomass-based 5-hydroxymethylfurfural (HMF) to FDCA has been a significant but challenging work in the past decades. In this study, a novel molybdenum-vanadium oxide (Mo-V-O) catalyst was prepared by a simple method and showed excellent catalytic activity for converting HMF to FDCA. A high FDCA selectivity of 94.5 and 98.2% conversion of HMF were achieved under the optimal conditions with tert-butyl hydroperoxide as the oxidant. FT-IR, SEM, XRD and TG were applied to investigate the properties of Mo-V-O catalyst. After fitting experimental data with the first-order kinetics equation, the evaluated apparent activation energies of HMF oxidation were obtained. The experimental design and study were carried out by response surface methodology (RSM) to test the effects of reaction conditions on the catalytic process.

Tailored functional materials as robust candidates to mitigate pesticides in aqueous matrices-a review

Pesticides are among the top-priority contaminants, which significantly contribute to environmental deterioration. Conventional techniques are not efficient enough to remove pollutants from environmental matrices. The development of functional materials has emerged as promising candidates to remove and degrade pesticides and related hazardous compounds. Furthermore, the nanohybrid materials with unique structural and functional characteristics, such as better material anchorage, mass transfer, electron-hole separation, and charged interaction make them a versatile option to treat and reduce pollutants from aqueous matrices. Herein, we present the current progress in the development of functional materials for the abatement of toxic pesticides. The physicochemical characteristics and pesticide-removal functionalities of various metallic functional materials (e.g., zirconium, zinc, titanium, tungsten, and iron), polymer, and carbon-based materials are critically discussed with suitable examples. Finally, the industrial-scale applications of the functional materials, concluding remarks, and future directions in this important arena are given.

Application of response surface methodology in physicochemical removal of dyes from wastewater: A critical review

Response surface methodology (RSM) is a powerful tool in designing the experiments and optimizing different environmental processes. However, when it comes to wastewater treatment and specifically dye-containing wastewater, two questions arise; "Is RSM being used correctly?" and "Are all capabilities of RSM being exploited properly?". The current review paper aims to answer these questions by scrutinizing different physicochemical processes that utilized RSM in dye removal. The literature that applied RSM to adsorption, advanced oxidation processes, coagulation/flocculation and electrocoagulation processes were critically reviewed in this paper. The common errors in applying RSM to physicochemical removal of dyes are identified and some suggestions are made for future studies.

Photocatalytic degradation of paraquat dichloride over CeO2-modified TiO2 nanotubes and the optimization of parameters by response surface methodology

The synthesis and surface modification of TiO₂ nanotubes with CeO₂ holding strong potential for photocatalytic organic pollutant abatement in water.

Multivariate optimization of process parameters in the synthesis of calcined Ca‒Al (NO3) LDH for defluoridation using 3(3) factorial, central composite and Box-Behnken design

Response surface methodology was applied for the first time in the optimization of the preparation of layered double hydroxide (LDH) for defluoridation. The influence of three vital process parameters (viz. pH, molar ratio and calcination temperature) in the synthesis of the adsorbent 'Calcined Ca‒Al (NO3) LDH' was thoroughly examined to maximize its fluoride scavenging potential. The process parameters were optimized using the 3(3) factorial, face centered central composite and Box-Behnken designs and a comparative assessment of the methods was conducted. The maximum fluoride removal efficiency was achieved at a calcination temperature of approximately 500ºC; however, the efficiency decreased with increasing pH and molar ratio. The outcome of the comparative assessment clearly delineates the case specific nature of the models. A better predictability over the entire experimental domain was obtained with the 3(3) factorial method, whereas the Box-Behnken design was found to be the most efficient model with lesser number of experimental runs. The desirability function technique was performed for optimizing the response, wherein face centered central composite design exhibited a maximum desirability. The calcined Ca‒Al (NO3) LDH, synthesized under the optimum conditions, demonstrated the removal efficiencies of 95% and 99% for the doses of 3 g L(-1) and 5 g L(-1), respectively.

Photocatalytic degradation of methyl blue by silver ion-doped titania: Identification of degradation products by GC-MS and IC analysis

An anionic triphenyl methane dye, methyl blue ((disodium;4-[4-[[4-(4-sulfonatoanilino)phenyl]-[4-(4-sulfonatophenyl)azaniumylidenecyclohexa-2,5-dien-1-ylidene]methyl]anilino]benzene sulfonate) was degraded photocatalytically with undoped micro-TiO2- and Ag(+)-doped micro TiO2 in a slurry-type batch reactor under UV irradiation and the efficiency was compared with that obtained using nano-TiO2- and Ag(+)-doped nano-TiO2. The influence of different parameters, i.e., photocatalyst loading, dye concentration, initial pH, temperature, depth of solution, interfering ions and electron acceptors on the dye degradation was investigated. The decolorization and mineralization efficiency was better for Ag(+)-doped micro-TiO2 than undoped micro-TiO2. Nano-TiO2 was more efficient than micro-TiO2, while Ag(+)-doped nano-TiO2 was the most efficient of all. Cost analysis showed degradation using micro-TiO2- and Ag(+)-doped micro-TiO2 are much cheaper than that using nano-TiO2 and Ag(+)-doped nano-TiO2. Therefore Ag(+)-doped micro-TiO2 was used for the detailed study. The degradation products formed were identified using GC-MS analysis after photocatalytic degradation for 180 min with Ag(+) -doped micro TiO2. Ion chromatography analysis was carried out for anions to identify the end products of degradation.

Characterization and photocatalytic performance evaluation of various metal ion-doped microstructured TiO2 under UV and visible light

Commercially available microcrystalline TiO2 was doped with silver, ferrous and ferric ion (1.0 mol %) using silver nitrate, ferrous sulfate and ferric nitrate solutions following the liquid impregnation technology. The catalysts prepared were characterised by FESEM, XRD, FTIR, DRS, particle size and micropore analysis. The photocatalytic activity of the prepared catalysts was tested on the degradation of two model dyes, methylene blue (3,7-bis (Dimethylamino)-phenothiazin-5-ium chloride, a cationic thiazine dye) and methyl blue (disodium;4-[4-[[4-(4-sulfonatoanilino)phenyl]-[4-(4-sulfonatophenyl)azaniumylidenecyclohexa-2,5-dien-1-ylidene]methyl]anilino]benzene sulfonate, an anionic triphenyl methane dye) under irradiation by UV and visible light in a batch reactor. The efficiency of the photocatalysts under UV and visible light was compared to ascertain the light range for effective utilization. The catalysts were found to have the anatase crystalline structure and their particle size is in a range of 140-250 nm. In the case of Fe(2+) doped TiO2 and Fe(3+) doped TiO2, there was a greater shift in the optical absorption towards the visible range. Under UV light, Ag(+) doped TiO2 was the most efficient catalyst and the corresponding decolorization was more than 99% for both the dyes. Under visible light, Fe(3+) doped TiO2 was the most efficient photocatalyst with more than 96% and 90% decolorization for methylene blue and methyl blue, respectively. The kinetics of the reaction under both UV and visible light was investigated using the Langmuir-Hinshelwood pseudo-first-order kinetic model. Kinetic measurements confirmed that, Ag(+) doped TiO2 was most efficient in the UV range, while Fe(3+) doped TiO2 was most efficient in the visible range.

Optimization of naproxen and ibuprofen removal in photolysis using a Box-Behnken design: effect of Fe(III), NO3-, and humic acid

This study investigated the roles and optimum conditions of four independent variables [ultraviolet (UV) intensity, Fe(III), NO3 (-), and humic acid (HA) concentration] in the photolytic removal of naproxen (NPX) and ibuprofen (IBP) in water using a response surface method based on the Box-Behnken design. Lab-scale experiments used analysis of variance and t-test statistics to test the significance of independent variables and their interactions. Predicted levels of NPX and IBP removals were found to be in good agreement with experimental levels (R(2) = 0.9891 for NPX and 0.9936 for IBP). UV intensity and HA were the most positively and negatively significant variables (P < 0.001), respectively. However, Fe(III) and NO3 (-) ions had a less significant impact (P > 0.05). This result implies that NPX was removed by both direct photolysis (photons) and indirect reaction (OH radical), while IBP was removed mainly by the OH radical. NPX was more susceptible to the OH radical than IBP (kOH/NPX = 8.24 × 10(9) M(-1)s(-1) and kOH/IBP = 7.51 × 10(9) M(-1)s(-1)). According to a quadratic regression model, the predicted maximum removal efficiencies for NPX and IBP were 71.66% and 63.58% when the predicted optimum ratio of UV (mW cm(-2)):Fe(III) (mg/L):NO3(-) (mg/L):HA (mg/L) was 6.3:0.94:0:0 and 6.3:0.94:20:0, respectively, which was similar to the respective experimental NPX and IBP removal values of 70.21% and 62.16%. Supplemental materials are available for this article. Go to the publisher's online edition of the Journal of Environmental Science and Health, Part A, to view the supplemental file.