ANAMMOX-like performances for nitrogen removal from ammonium-sulfate-rich wastewater in an anaerobic sequencing batch reactor

Anammox with alternative electron acceptors: perspectives for nitrogen removal from wastewaters

In the context of the anaerobic ammonium oxidation process (anammox), great scientific advances have been made over the past two decades, making anammox a consolidated technology widely used worldwide for nitrogen removal from wastewaters. This review provides a detailed and comprehensive description of the anammox process, the microorganisms involved and their metabolism. In addition, recent research on the application of the anammox process with alternative electron acceptors is described, highlighting the biochemical reactions involved, its advantages and potential applications for specific wastewaters. An updated description is also given of studies reporting the ability of microorganisms to couple the anammox process to extracellular electron transfer to insoluble electron acceptors; particularly iron, carbon-based materials and electrodes in bioelectrochemical systems (BES). The latter, also referred to as anodic anammox, is a promising strategy to combine the ammonium removal from wastewater with bioelectricity production, which is discussed here in terms of its efficiency, economic feasibility, and energetic aspects. Therefore, the information provided in this review is relevant for future applications.

Integration of the sulfate reduction and anammox processes for enhancing sustainable nitrogen removal in granular sludge reactors

The Anammox and Sulfate Reduction Ammonium Oxidation processes were compared in two granular sequencing batch reactors operated for 160 days under anammox conditions. It was hypothesized that increasing the concentration of SO₄^2- may positively influence the rate of N removal under anaerobic conditions and it was tested whether SO₄^2- reduction and anammox occur independently or are related to each other. The cooperation of N-S cycles by increasing the concentration of influent SO₄^2- to 952 mg S/L in the second reactor, a higher ammonium utilization rate and sulfate utilization rate was achieved compared to the first reactor, i.e., 2.1-fold and 15-fold, respectively. Nitrosomonas played the dominant role in the N metabolism, while Thauera - in the S metabolism. This study highlights the benefits of linking the N-S cycles as an effective approach for the treatment of NH₄⁺ and SO₄^2- - rich wastewater, including lower substrate removal cost and reduced energy consumption.

Novel biotechnologies for nitrogen removal and their coupling with gas emissions abatement in wastewater treatment facilities

Wastewaters contaminated with nitrogenous pollutants, derived from anthropogenic activities, have exacerbated our ecosystems sparking environmental problems, such as eutrophication and acidification of water reservoirs, emission of greenhouse gases, death of aquatic organisms, among others. Wastewater treatment facilities (WWTF) combining nitrification and denitrification, and lately partial nitrification coupled to anaerobic ammonium oxidation (anammox), have traditionally been applied for the removal of nitrogen from wastewaters. The present work provides a comprehensive review of the recent biotechnologies developed in which nitrogen-removing processes are relevant for the treatment of both wastewaters and gas emissions. These novel processes include the anammox process with alternative electron acceptors, such as sulfate (sulfammox), ferric iron (feammox), and anodes in microbial electrolysis cells (anodic anammox). New technologies that couple nitrate/nitrite reduction with the oxidation of methane, H₂S, volatile methyl siloxanes, and other volatile organic compounds are also described. The potential of these processes for (i) minimizing greenhouse gas emissions from WWTF, (ii) biogas purification, and (iii) air pollution control is critically discussed considering the factors that might trigger N₂O release during nitrate/nitrite reduction. Moreover, this review provides a discussion on the main challenges to tackle towards the consolidation of these novel biotechnologies.

Nitrogen removal from ammonium- and sulfate-rich wastewater in an upflow anaerobic sludge bed reactor: performance and microbial community structure

Autotrophic ammonium removal by sulfate-dependent anaerobic ammonium oxidation (S-Anammox) process was studied in an upflow anaerobic sludge bed reactor inoculated with Anammox sludge. Over an operation period of 371 days, the reactor with a hydraulic retention time of 16 h was fed with influent in which NH₄⁺ concentration was fixed at 70 mg N L^-1, and the molar ratio of NO₂^-:NO₃^-:SO₄^2- was 1:0.2:0.2, 0.5:0.1:0.3 and 0:0:0.5 in stages I, II and III, respectively. As the NO₂^- in influent was entirely replaced by SO₄^2-, the NH₄⁺ removal rate was 31.02 mg N L^-1 d^-1, and the conversion rate of SO₄^2- was 8.18 mg S L^-1 d^-1. On grounds of the high NH₄⁺:SO₄^2- removal ratio (8.67:1), the S^2- accumulation and pH drop in effluent, as well as the analysis results of microbial community structure, the S-Anammox process was speculated to play a dominant role in stage III. The NH₄⁺ over-transformation was presumably as a consequence of the cyclic regeneration of SO₄^2-. Concerning the microbial characteristics in the system, the Anammox bacteria (Candidatus Brocadia), sulfate-reducing bacteria (SRB) (Desulfatiglans and Desulfurivibrio) and sulfur-oxidizing bacteria (SOB) (Thiobacillus) in biomass was enriched in the case of without addition of NO₂^- in influent. Sulfate reduction driven ammonium anaerobic oxidation was probably attributed to the coordinated metabolism of nitrogen- and sulfur-utilizing bacteria consortium, in which Anammox bacteria dominates the nitrogen removal, and the SRB and SOB participates in the sulfur cycle as well as accepts required electrons from Anammox bacteria through a direct inter-species electron transfer (DIET) pathway.

Hot spots and hot moments of nitrogen removal from hyporheic and riparian zones: A review

The Earth is experiencing excessive nitrogen (N) input to its various ecosystems due to human activities. How to effectively and efficiently remove N from ecosystems has been, is and will be at the center of attention in N research. Hyporheic and riparian zones are widely acknowledged for their buffering capacity to reduce contaminants (especially N) transport downstream. However, these zones are usually misunderstood that they can remove N at all spots and at any moments. Here pathways of N removal from hyporheic and riparian zones are reviewed and summarized with an emphasize on their hot spots and hot moments. N is biogeochemically removed by denitrification, anammox, nitrifier denitrification, denitrifying anaerobic methane oxidation, Feammox and Sulfammox. Hot moments of N removal are mainly triggered by precipitation, fire and snowmelt. Finally, some research needs are outlined and discussed, such as developing approaches for multiscale sampling and monitoring, quantifying the effects of hot spots and hot moments at hyporheic and riparian zones and evaluating the impacts of human activities on hot spots and hot moments, to inspire more research on hot spots and hot moments of N removal. By this review, we hope to bring awareness of the heterogeneity of hyporheic and riparian zones to catchment managers and policy makers when tackling N pollution problems.

The Influence of Sulfate on Anaerobic Ammonium Oxidation in a Sequencing Batch Reactor

Anaerobic ammonia-oxidizing bacteria have a more comprehensive metabolism than expected - there may be other electron acceptors that oxidize ammonium nitrogen under anaerobic conditions, in addition to the well-known nitrite nitrogen, one of which is sulfate in the sulfammox process. Sulfate-containing compounds are part of the medium for the anammox process, but their concentrations are not particularly high (0.2 g MgSO4 ∙ 7H2O/dm3 and 0.00625 g FeSO4/dm3). They can react to some extent with influent ammonium nitrogen. In this work, tests were carried out in two sequencing batch reactors with granular sludge. The first reactor (R1) operated in a 6 h cycle, and the concentration of the inflowing sulfate was kept at 44 mg/dm3∙d. The second reactor (R2) was operated until the 36th day in a 6 h cycle; the influencing concentration was 180 mg SO42−/dm3∙d from the 37th to 64th day in a 3 h cycle, with an influencing concentration of 360 mg SO42−/dm3∙d; and from the 65th to 90th day, the reactor was operated again in a 6 h cycle with an influencing concentration of 180 mg SO42−/dm3∙d. Along with the increased share of sulfate, both the ammonium utilization rate and specific anammox activity showed an increasing trend. As soon as the sulfate dosage was reduced, the ammonium utilization rate and specific anammox activity values dropped. Therefore, it can be concluded that sulfate-containing compounds contribute to the efficiency and rate of the anammox process.

High-efficient nitrogen removal from municipal wastewater via two-stage nitritation/anammox process: Long-term stability assessment and mechanism analysis

This study focused on the long-term stability of a novel two-stage partial-nitritation/anammox (PN/A) process treating municipal wastewater with fluctuated water quality. Specifically, two parallel sequencing batch reactors (SBRs) were used for removing organic matters and achieving complete nitritation, while the expanded granular sludge bed (ANA-EGSB) was used for anammox. With the influent ammonium concentration varying from 32 to 79 mg/L and the average hydraulic retention time of 3.39 h in this system, more than 93% of ammonium was removed and the effluent TIN was 4.8-11.8 mg/L. The partial denitrifying occurring in the anammox reactor could reduce nitrate to nitrite that was reused by anammox bacterium, enhancing the TIN removal efficiency. Further, the "overconsumption of ammonium" under anaerobic conditions was observed in ANA-EGSB. Microbial community analysis showed that Nitrosomonas (AOB) were the dominant nitrifying bacteria in the nitritation SBR and Candidatus_Brocadia with the relative abundance of 6-13% dominated in ANA-EGSB.

Negligible seeding source effect on the final ANAMMOX community under steady and high nitrogen loading rate after enrichment using poly(vinyl alcohol) gel carriers

This study investigated the effect of seeding source on the mature anaerobic ammonia oxidation (ANAMMOX) bacterial community niche in continuous poly(vinyl alcohol) (PVA) gel systems operated under high nitrogen loading rate (NLR) condition. Four identical column reactors packed with PVA gels were operated for 182 d using different seeding sources which had distinct community structures. The ANAMMOX reaction was achieved in all the bioreactors with comparable total and ANAMMOX bacterial 16S rRNA gene quantities. The bacterial community structure of the bioreactors became similar during operation; some major bacteria were commonly found. Interestingly, one ANAMMOX species, "Candidatus Brocadia sinica", was conclusively predominant in all the bioreactors, even though different seeding sludges were used as inoculum source, possibly due to the unique physiological characteristics of "Ca. Brocadia sinica" and the operating conditions (i.e., PVA gel-based continuous system and 1.0 kg-N/(m³·d) of NLR). The results clearly suggest that high NLR condition is a more significant factor determining the final ANAMMOX community niche than is the type of seeding source.