Organochlorine pesticides and polychlorinated biphenyls in sewage sludge from Egypt

Assessing emerging and priority micropollutants in sewage sludge: environmental insights and analytical approaches

The application of sewage sludge (SS) in agriculture, as an alternative to manufactured fertilizers, is current practice worldwide. However, as wastewater is collected from households, industries, and hospitals, the resulting sludge could contaminate land with creeping levels of pharmaceuticals, pesticides, heavy metals, polycyclic aromatic hydrocarbons, and microplastics, among others. Thus, the sustainable management of SS requires the development of selective methods for the identification and quantification of pollutants, preventing ecological and/or health risks. This study presents a thorough evaluation of emerging and priority micropollutants in SS, through the lens of environmental insights, by developing and implementing an integrated analytical approach. A quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction method, coupled with gas chromatography and liquid chromatography, was optimized for the determination of 42 organic compounds. These include organophosphorus pesticides, organochlorine pesticides, pyrethroid pesticides, organophosphate ester flame retardants, polybrominated diphenyl ethers, polychlorinated biphenyls, and polycyclic aromatic hydrocarbons. The optimization of the dispersive-solid phase for clean-up, combined with the optimization of chromatographic parameters, ensured improved sensitivity. Method validation included assessments for recovery, reproducibility, limit of detection (LOD), and limit of quantification (LOQ). Recoveries ranged from 59.5 to 117%, while LODs ranged from 0.00700 to 0.271 µg g-1. Application of the method to seven SS samples from Portuguese wastewater treatment plants revealed the presence of sixteen compounds, including persistent organic pollutants. The quantification of α-endosulfan, an organochlorine pesticide, was consistently observed in all samples, with concentrations ranging from 0.110 to 0.571 µg g-1. Furthermore, the study encompasses the analysis of agronomic parameters, as well as the mineral and metal content in SS samples. The study demonstrates that the levels of heavy metals comply with legal limits. By conducting a comprehensive investigation into the presence of micropollutants in SS, this study contributes to a deeper understanding of the environmental and sustainable implications associated with SS management.

Individual and mixtures of polychlorinated biphenyls and organochlorine pesticides exposure in relation to metabolic syndrome among Chinese adults

Polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) are commonly detected in humans due to their persistence and bioaccumulation, and are suspected risk factors for metabolic syndrome (MetS). However, most studies have focused on individual rather than combined exposure. We explored the associations between individual and combined PCBs/OCPs exposure and MetS to better assess the health effects of PCBs and OCPs. This cross-sectional study included 1996 adults from Wuhan, China. A total of 338 participants fulfilled criteria for MetS. Eight PCBs and OCPs were detected in >50 % of the samples. Most of the hexachlorocyclohexanes (HCHs) in the serum were derived from the recent environmental input of lindane, while the high levels of dichlorodiphenyltrichloroethane (DDTs) were mainly due to historical use. Multivariate linear regression analyses revealed that β-HCH, p,p'-dichlorodiphenyldichloroethylene (p,p'-DDE), PCB-52, PCB-153, and PCB-180 were positively correlated with increased odds of MetS. The profiles of the PCBs and OCPs associated with the different components of MetS were distinct. Furthermore, quantile-based g computation (qgcomp) analyses showed that PCB and OCP mixtures were positively associated with the risk of MetS, and p,p'-DDE was the largest contributor to our model. These findings suggest that PCB and OCP concentrations, both individually and as mixtures, are associated with MetS risk. Prospective studies are needed to confirm these results.

Explanation of difenoconazole removal by chitosan with Langmuir adsorption isotherm and kinetic modeling

In this study, the adsorption of toxic difenoconazole pesticide was investigated by using chitosan. In the first phase of the study, chitosan was extracted from deep-water pink shrimp (Parapenaeus longirostris) shells, by deacetylation of the chitin, which is separated and disposed of after meat extraction in processing facilities in Turkey. The deacetylation degree, molecular weight, viscosity, moisture, and crude-ash values of the extracted chitosan were determined. Chitosan, having a high deacetylation degree (90.21%), was used as the adsorbent. In the second phase of the study, the effects of pH, temperature, and pesticide concentration on the adsorption were investigated. The optimum pH level for pesticide adsorption was determined as 5. It was observed that the adsorption increases as the temperature increases. A rapid increase was observed within the first 5 min of the 60-minute adsorption process in difenoconazole concentrations of 5, 15, and 25 µg/L, and after 10 min, the adsorption rate was stable. The Langmuir isotherm parameters regarding the adsorption were determined as aL = 0.635, kL = 15.10, and the Qmax value was calculated as 23.77 mg/g. In the evaluation of overall study results, it was determined that the chitosan biopolymer is a suitable adsorbent for difenoconazole pesticide adsorption.

Health risk of consuming Sphoeroides spp. from the Navachiste Lagoon complex due to its trace metals and organochlorine pesticides content

The Navachiste complex (NAV) is impacted by neighbored human activities and is located in the southwestern coastal zone of the Gulf of California. The study determines the trace metal (TM) and organochlorine pesticides (OCP) health risk content in the edible tissue of Sphoeroides spp. from NAV. The daily intakes (EDI), target hazard quotient (THQ), hazard index (HI), and carcinogenic and non-carcinogenic risks were calculated. Twenty OCP and seven TM were detected. Cd, Cu, Fe, Mn, Pb, and Zn were above MRLs. The γ‒Chlordane was the most frequent OCP. The highest average concentration was for α‒HCH, followed by γ‒chlordane. With the high ratios of γ‒HCH, p, p'‒ DDD and p, p'‒DDD, and the absence of p, p'‒ DDT, the higher ratios for dieldrin and endrin than for aldrin, α‒ chlordane, γ‒chlordane, heptachlor, and heptachlor epoxide indicates historical contamination. In contrast, the residual products of methoxychlor, endosulfan, and its isomers indicate endosulfan's recent use. The TM EDI, THQ > 1 (at 120 g day^-1), and the ILCR (> 1 × 10^-6) were above minimum levels, showing a high-risk potential for cancer development in the long term.

Occurrence and dissipation mechanism of organic pollutants during the composting of sewage sludge: A critical review

Sewage sludge contains various classes of organic pollutants, limiting its land application. Sludge composting can effectively remove some organic pollutants. This review summarizesrecent researches on concentration changes and dissipation of different organic pollutants including persistent organic pollutants during sludge composting, and discusses their dissipation pathways and the current understanding on dissipation mechanism. Some organic pollutants like PAHs and phthalates were removed mainly through biodegradation or mineralization, and their dissipation percentages were higher than those of PCDD/Fs and PCBs. Nevertheless, some recalcitrant organic pollutants could be sequestrated in organic fractions of sludge mixtures, and their levels and ARG abundance even increased after sludge composting in some studies, posing potential risks for land application. This review demonstrated that microbial community and their corresponding degradation for organic pollutants were influenced by different pollutants, bulking agents, composting methods and processes. Further research perspectives on removing organic pollutants during sludge composting were highlighted.

Organic contaminants in the effluent of Chinese wastewater treatment plants

The effluents of wastewater treatment plants (WWTPs) are the important sources for pollutants. These pollutants may entry into surface water, groundwater, and soil by recharging and irrigation then pose risk to human beings. Using reports from the past 20 years (n = 58), we conducted this review of organic contaminants (OCs) in the effluent of Chinese WWTPs. All the studies were during 2005 to 2017 and more than two papers were conducted in every year. Nineteen provinces (20 cities) were covered and most of the studies were located in the eastern part of China, especially the most developed and highest density of population areas. Two hundred eighty-four OCs were contained. E antibiotics, endocrine-disrupting chemicals (EDCs), and pharmaceuticals were the most commonly studied groups of OCs, and ofloxacin, norfloxacin, and sulfamethoxazole were the three most commonly reported OCs. The highest concentration appeared for bisphenol A (BPA). The relative standard deviations (RSDs) of concentrations of the most commonly studied compounds were high. In the future, more studies should pay attention on national analysis and more pollutants.