Improved salt removal and power generation in a cascade of two hydraulically connected up-flow microbial desalination cells

Effective salt removal from domestic reverse osmosis reject water in a microbial desalination cell

Microbial desalination cells (MDC) are evaluated as an environmentally friendly approach for purifying saline water by using power generated by the decomposition of organic materials in the wastewater. The present study is to evaluate the ferrocyanide-redox and biocathode approach in treating simulated saline water and subsequently recovering bio-electricity using actual domestic reverse osmosis reject water. For the desalination of simulated saline water and domestic reverse osmosis reject water, a three-chamber microbial desalination cell with graphite electrodes and anion and cation exchange membranes was constructed. When treating simulated saline water, the biocathode technique achieved a 5% improvement in salt removal and a 4.9% increase in current and power density when compared to the ferrocyanide-redox approach. When biocathode MDC was used to treat domestic reverse osmosis reject water, a maximum current and power density of 3.81 μA/cm² and 0.337 μW/cm², respectively, were recorded, as well as COD removal of 83.9% at the desalination chamber and ions reduction for Na, K, and Ca of up to 79%, 76.5%, and 72%, respectively, in a batch operation for 31 days with a stable pH (≈ 7). Thus, the study revealed a microbial desalination cell capable of recovering bioenergy and reducing salt from domestic reverse osmosis reject water with a consistent pH range.

Review on microbial fuel cells applications, developments and costs

The microbial fuel cell (MFC) technology has attracted significant attention in the last years due to its potential to recover energy in a wastewater treatment. The idea of using an MFC in industry is very attractive as the organic wastes can be converted into energy, reducing the waste disposal costs and the energy needs while increasing the company profit. However, taking aside these promising prospects, the attempts to apply MFCs in large-scale have not been succeeded so far since their lower performance and high costs remains challenging. This review intends to present the main applications of the MFC systems and its developments, particularly the advances on configuration and operating conditions. The diagnostic techniques used to evaluate the MFC performance as well as the different modeling approaches are described. Towards the introduction of the MFC in the market, a cost analysis is also included. The development of low-cost materials and more efficient systems, with high higher power outputs and durability, are crucial towards the application of MFCs in industrial/large scale. This work is a helpful tool for discovering new operation and design regimes.

A state-of-the-art review on microbial desalination cells

The rapid growth in population has increased the demand for potable water. Available technologies for its generation are the desalination of sea water through reverse osmosis, electrodialysis etc., which are energy and cost intensive. In this context, microbial desalination cell (MDC) presents a low-cost and sustainable option which can simultaneously treat wastewater, desalinate saline water, produce electrical energy and recover nutrients from wastewater. This review paper is focussed on presenting a detailed analysis of MDCs starting from the principle of operation, microbial community analysis, basic architecture, evolution in design, operational challenges, effect of process parameters, scale-up studies, application in multiple arenas and future prospects. After thorough review, it can be inferred that MDCs can be used as a stand-alone option or pre-treatment step for conventional desalination techniques without the application of external energy. MDCs have been used in multiple applications ranging from desalination, remediation of contaminated water, recovery of energy and nutrients from wastewater, softening of hardwater, biohydrogen production to degradation of waste engine oil. Although, MDCs have been used for multiple applications, still a number of operational challenges have been reported viz., interference of co-existing ions during desalination, membrane fouling, pH imbalance and limited potential of exoelectrogens. However, the re-circulation of anolytes with electrodialysis chamber has led to the maintenance of optimal pH for favourable microbial growth leading to improvement in the overall performance of MDCs. In future, genetic engineering may be used for improving the electrogenic activity of microbial community, next generation materials may be used as anode and cathode, varied sources of wastewater may be explored as anolytes, life cycle analysis and exergy analysis may be carried out to study the impact on environment and detailed pilot scale studies have to be carried out for assessing the feasibility of operation at large scale.