Critical Evaluation of Crispy and Crunchy Textures: A Review

Alteration of Mastication Force via Intraoral Closed-loop Electrical Stimulation

Mastication plays an important role in effective food digestion and nutrient absorption. Therefore, regulating masticatory force in people with declining mastication function is significant for maintaining health and quality of life. In this study, we tested the effect of tactile augmentation on mastication force. To augment tactile feedback during mastication, we applied closed-loop electrical stimulation onto the mandibular vestibule using an intraoral tooth-borne electronic system. We hypothesized that closed-loop electrical stimulation, timed with mastication and applied to the nerves delivering tactile feedback to the brain, would evoke an increase in masticatory force. Experiments were completed using the intraoral system with six healthy human subjects who masticated soft and hard foods with and without stimulation during the experiment. Their mastication forces were recorded ten times per condition. The recorded mastication force profile showed that mastication force was higher with the harder food. Also, mastication force increased when electrical stimulation was applied, compared to the non-stimulated condition. These results support the hypothesis that tactile augmentation by intraoral closed-loop electrical stimulation will increase masticatory force. Other mastication parameters including period, spike width, and duty cycle are also changed by electrical stimulation. Further, stimulation left a strong aftereffect on these mastication parameters.

Soy-Based High-Protein Spheric Foods with the Appearance of Familiar Sugary Snacks

Excessive consumption of sugary foods increases the likelihood of obesity, as well as the preventable risk of lifestyle illnesses such as diabetes and cardiovascular diseases. Frequent intake of sweet snacks is considered to increase the risk of overweight/obesity in industrial nations. However, we cannot stop snacking against our better judgment. Therefore, in this study, we sought to develop high-protein, low-carb "mock snacks" to satisfy snack lovers' appetites and nutrition. Soy protein-based, ball-shaped food products with 57.7% (w/w) protein and 3.6% sugar have been developed. The addition of canola oil made them melty in the mouth without sacrificing their crispiness. Moreover, evaluation of the surface topography of the "soy balls" by 3D laser scanning demonstrated their high degree of sphericity. Conclusively, the snacks developed here may be one of the healthy alternatives for the current sugary ones.

Effects of sensory combination on crispness and prediction of sensory evaluation value by Gaussian process regression

Crispness contributes to the pleasantness and enjoyment of eating foods and is popular with people of wide ages in many countries. Hence, a quantitative evaluation method for crispness is required for food companies developing new food products. In this study, the effects of different sensory combinations on crispness were investigated through sensory evaluation, and a Gaussian process regression model was used to predict the evaluation values of crispness. First, four crispness descriptors in Japanese were selected, and sensory evaluations were conducted with ten participants using commercially available snack foods under three different sensory combinations of force, vibration, and sound to confirm the effects of the three senses. An instrumental system also measured force, vibration, and sound for snack foods under the same conditions. The Gaussian process regression model determined the relationship between the sensory and measurement data and predicted the sensory evaluation values from the measurement data. Cross-validation verified that the Gaussian process regression model accurately predicted the food texture evaluation values from the measurement data even in conditions with different sensory components.

Effect of drying temperature and storage time on the crispiness of homemade apple snacks

BACKGROUND

The apple (Malus domestica Borkh.) plays an important role in the trendy market of dried snacks because of its exceptional flavor and texture. In addition to the health benefits, there is also a general disposition to consume organic and do-it-yourself products.

RESULTS

Three different drying temperatures, 65, 75, and 85 °C, were tested using a commercial ventilated drying oven in 'Royal Gala' and 'Golden Delicious' cultivars. Physical changes, including texture, color, shrinkage ratio, and microstructure, were evaluated for the temperatures and cultivars considered. Based on the results, particularly in terms of shrinkage, hardness, and crispiness, a drying temperature of 75 °C was selected to perform texture profile analyses throughout the drying period. Storability conditions were evaluated to determine the best moment to maintain the physical properties of the dried snacks during storage. Considered the more important property related to consumer preferences, crispiness was followed with puncture tests.

CONCLUSION

The storage of apple chips, dried at the various temperatures, that must be performed in 5-10 min after removing from the drying oven, was assessed over the course of a month. Both the drying process and the subsequent storage proved effective in preserving the desired texture of the apple snacks, regardless of the specific cultivar or drying temperature used. Through this study, with a refined understanding of the changes occurring during the drying process and the optimization of storage conditions, we can confidently offer consumers the best combination of crispy and healthy snacks that meet their expectations. © 2023 Society of Chemical Industry.

Classification of crispness of food materials by deep neural networks

Crispness is a textural characteristic that influences consumer choices, requiring a comprehensive understanding for product customization. Previous studies employing neural networks focused on acquiring audio through mechanical crushing of crispy samples. This research investigates the representation of crispy sound in time intervals and frequency domains, identifying key parameters to distinguish different foods. Two machine learning architectures, multi-layer perceptron (MLP) and residual neural network (ResNet), were used to analyze mel frequency cepstral coefficients (MFCC) and discrete Fourier transform (DFT) data, respectively. The models achieved over 95% accuracy "in-sample" successfully classifying fried chicken, potato chips, and toast using randomly extracted audio from ASMR videos. The MLP (MFCC) model demonstrated superior robustness compared to ResNet and predicted external inputs, such as freshly toasted bread acquired by a microphone or ASMR audio of toast in milk. In contrast, the ResNet model proved to be more responsive to variations in DFT spectrum and unable to predict the similarity of external audio sources, making it useful for classifying pretrained "in-samples". These findings are useful for classifying crispness among individual food sources. Additionally, the study explores the promising utilization of ASMR audio from Internet platforms to pretrain artificial neural network models, expanding the dataset for investigating the texture of crispy foods.

Mechanical approach for the evaluation of the crispiness of food granular products

Crispiness of food products is a key parameter for consumer acceptance. Available methods to evaluate this attribute are subjective and have limitations. They are particularly difficult to implement when granular products are considered. The present study aims to provide a physical characterization of the crispiness of food granular products (gari and grinded corn flakes) based on the compression cycle modeling and the determination of the Py (yield pressure) parameter of the Heckel model. High Py values attributed to the brittle behavior, are indicative of product crispiness. Furthermore, Py parameter showed sensitivity to the plasticizing effect of water. This developed physical method was validated through sensory analysis and acoustic measurements which are both considered as reference methods for crispiness evaluation. The brittle/plastic behavior attributed to crispy/non crispy products respectively was confirmed through image analysis using X-ray microcomputed tomography. The latter made it possible to distinguish the brittle from the plastic behavior through the particle size distribution evolution. This work suggests that the Py value is a relevant indicator for the crispiness evaluation of granular products. This physical characterization is expected to contribute in food engineering as an alternative method for granular products crispiness in a simpler and a more objective way.

Auditory-Perceptual Assessments of Cough: Characterizing Rater Reliability and the Effects of a Standardized Training Protocol

INTRODUCTION

Auditory-perceptual assessments of cough are commonly used by speech-language pathologists working with people with swallowing disorders with emerging evidence beginning to demonstrate their validity; however, their reliability among novice clinicians is unknown. Therefore, the primary aim of this study was to characterize the reliability of auditory-perceptual assessments of cough among a group of novice clinicians. As a secondary aim, we assessed the effects of a standardized training protocol on the reliability of auditory-perceptual assessments of cough.

METHODS

Twelve novice clinicians blindly rated ten auditory-perceptual cough descriptors for 120 cough audio clips. Standardized training was then completed by the group of clinicians. The same cough audio clips were then re-randomized and blindly rated. Reliability was analyzed pre- and post-training within each clinician (intra-rater), between each unique pair of raters (dyad-level inter-rater), and for the entire group of raters (group-level inter-rater) using intraclass correlation coefficients and Cohen's Kappa.

RESULTS

Pre-training reliability was greatest for measures of strength, effectiveness, and normality and lowest when judging the type of expiratory maneuver (cough, throat clear, huff, other). The measures that improved the most with training were ratings of perceived crispness, amount of voicing, and type of expiratory maneuver. Intra-rater reliability coefficients ranged from 0.580 to 0.903 pre-training and 0.756-0.904 post-training. Dyad-level inter-rater reliability coefficients ranged from 0.295 to 0.745 pre-training and 0.450-0.804 post-training. Group-level inter-rater reliability coefficients ranged from 0.454 to 0.919 pre-training and 0.558-0.948 post-training.

CONCLUSION

Reliability of auditory-perceptual assessments varied across perceptual cough descriptors, but all appeared within the range of what has been historically reported for auditory-perceptual assessments of voice and visual-perceptual assessments of swallowing and cough airflow. Reliability improved for most cough descriptors following 30-60 min of standardized training. Future research is needed to examine the validity of auditory-perceptual assessments of cough by assessing the relationship between perceptual cough descriptors and instrumental measures of cough effectiveness to better understand the role of perceptual assessments in clinical practice.

Consumers' Acceptance, Emotions, and Responsiveness to Informational Cues for Air-Fried Catfish (Ictalurus punctatus) Skin Chips

Catfish (Ictalurus punctatus) skins, as filleting byproduct, were developed into a crispy snack food via air-frying. Consumers rated catfish skin chips (CSC) across sensory modalities (9-point hedonic scales, a just-about-right scale, and "yes/no" for purchase intent, PI) for Plain-, Lemon & Pepper-, and Barbecue-flavored samples during two consumer studies (N = 115 each). Paprika- flavored CSC were excluded from Study 2 due to inferior acceptance and emotional ratings. CSC-elicited emotions were evaluated using a 25-term lexicon with CATA (Check-All-That-Apply) scaling (Study 1) and refined with an abbreviated lexicon containing food-evoked sensation-seeking emotions (5-point intensity scale). The two consumer studies differed in delivery format of product benefit information (a health/protein message and a food waste/sustainability message). Presenting two separate cues (Study 1) significantly increased overall liking (by 0.5 units) and PI (by 15%) for CSC compared to a single integrated message (Study 2), perhaps due to consumers' mode of information processing. Magnitude of increases was less for Barbeque CSC despite performing best overall (overall liking reaching 6.62 and PI reaching 61.7%). CSC generated mostly positive emotions, and informational cues increased sensation-seeking feelings, which can motivate trial of new foods. Accordingly, acceptance of CSC improved for 25 repeat-exposure consumers who participated in both Studies 1 and 2. In combination, sensory, cognitive, and emotional data showed favorable responses for flavored CSC as an appropriate application of this seafood byproduct.

Quality attributes of date and wheat flour pineapple juice blended cookies as affected by different baking temperatures

Studying the effects of temperature on cookies are necessary especially if the impact on quality attributes are to be deduced. More so, blending wheat flour, date flour, and pineapple juice could improve the nutrient quality required in modern-day cookies. This current study investigated the quality attributes of date and wheat flour pineapple juice blended cookies as affected by different baking temperatures. With pineapple juice serving as water substitute, the formulated date, and wheat flour blends adhered to the following ratios: 100:0, 90:10, 80:20, and 70:30. Baking cookies involved two different temperatures (160 °C and 180 °C) with constant time (30 min). Quality attributes determined proximate composition, micronutrients, physical and functional properties, and microbial and sensory qualities. Cookies proximate results showed moisture (6.89-7.40%), protein (8.73-10.22%), fat (14.37-15.99%), fiber (1.02-1.11%), ash (0.77-1.20%) and carbohydrate (64.85-67.71%). Various ranges appeared, from energy values (434.90-444.10 kcal), minerals (calcium = 33.18-62.45 mg/100 g; iron = 3.47-5.75 mg/100 g; potassium = 100.07-358.63 mg/100 g), vitamins (vitamin A =1.99-4.89 mg/100 g; vitamin C = 0.04-0.15 mg/100 g), physical (weight = 7.4-7.75 g; diameter = 3.50-4.01 cm; thickness = 0.99-1.20 cm; volume = 3.11-3.77 cm³; density = 2.06-2.41 g/cm³; spread ratio = 2.92-4.05 cm³), to functional (water absorption = 1.14-1.18 g/g; oil absorption capacity = 1.31-1.33 g/g; bulk density = 0.74-0.76 g/mL) properties. The microbial loads seemed somewhat acceptable as overall acceptability favoured sample WDFb (90% wheat, 10% date flour). The acceptability of cookies baked at 160 °C over those baked at 180 °C suggests the need for further studies to determine the energy requirements, and long-term environmental implications such (baking) temperatures would pose.

A Novel Approach for the Characterization of the Textural Properties of Table Olives: Acoustic Compression Related to Sensory Analysis

This research was performed on marketed table olives. We investigated possible correlations among textural parameters obtained using both sensory assessment and instrumental textural analysis. The purpose of this research study was to find out any possible correlation between the two different analysis methods, especially in relation to acoustic compression. Up to now, there are no available studies on this topic. Samples from different olive cultivars and different processing methods were analysed, and a data matrix resulting from four textural/acoustic and six sensorial kinaesthetic parameters was processed. The two parameters "S_crunch" and "T_noise" (the "S" letter is for "sensorial", and the "T" letter is for "textural") showed complementarity, but they did not discriminate properly. The textural values of "T_flesh_h" and the sensory values of "S_flesh_h" were directly correlated to "S_crunch", and as an unexpected result, the textural values of "T_skin_bs" and the sensory values of "S_skin_h" were closely linked to each other. Regarding the analysed parameters, the results showed that the two techniques are clearly complementary and could constitute a valid tool for varietal characterization and for determining the instrumental and organoleptic qualities of the product; it was not possible to proceed with the characterization by type of processing method, as the dataset was not large enough.

Effect of ultrasound pretreated hydrocolloid batters on quality attributes of fried chicken nuggets during post-fry holding

In this study, batters formulated with different hydrocolloids (i.e., pectin, locust bean gum, xanthan gum, guar gum, hydroxypropyl methylcellulose and methylcellulose) were treated with ultrasound as edible coatings for fried chicken nuggets. Quality characteristics (i.e., batter pickup, flow behaviours, thermal properties, moisture loss, color and textural properties) in chicken nuggets coated with ultrasound treated batters were evaluated before and after post frying exposure to heat lamp. Ultrasonication significantly reduced batter pickup, flow behavior and gelatinization enthalpy, revealing its tendency to alter functional properties of batter systems. Rheological evaluation of all batter samples revealed a pseudoplastic (shear thinning) flow characteristic when fitted to power law model, with ultrasonicated (US) samples exhibiting a significantreduction in viscosity over non-ultrasonicated (NUS) samples. Compared to the control NUS, fat content of chicken nuggets coated with US-treated batters decreased by 39.0, 60.9, 62.87, 64.1, 65.7, and 65.0 % for pectin, locust bean gum, xanthan gum, guar gum, hydroxypropyl methylcellulose and methylcellulose, respectively. Finally, chicken nuggets coated with US and NUS treated batters exhibited greater cutting force values immediately after frying but declined within the first 10 min of heat lamp exposure and increased subsequently with extended heat lamp holding time. Furthermore, NUS-treated guar gum resulted in chicken nuggets with the most minimal variability in cutting force during post-frying holding, indicating that crispiness was maintained. Overall, application of ultrasound as a batter pretreatment technique can be exploited by the frying food industry as an alternative approach to producing low fat chicken nuggets with appreciable quality attributes.

Edible mechanical metamaterials with designed fracture for mouthfeel control

Metamaterials can display unusual and superior properties that come from their carefully designed structure rather than their composition. Metamaterials have permeated large swatches of science, including electromagnetics and mechanics. Although metamaterials hold the promise for realizing technological advances, their potential to enhance interactions between humans and materials has largely remained unexplored. Here, we devise a class edible mechanical metamaterials with tailored fracture properties to control mouthfeel sensory experience. Using chocolate as a model material, we first demonstrate how to create and control the fracture anisotropy, and the number of cracks, and demonstrate that these properties are captured in mouthfeel experience. We further use topology optimization to rationally design edible metamaterials with maximally anisotropic fracture strength. Our work opens avenues for the use of metamaterials to control fracture and to enhance human-matter interactions.

Development of Healthy Protein-Rich Crackers Using Tenebrio molitor Flour

Entomophagy is still a widespread practice in Africa and Asia, although it is declining due to the westernization of diets. Today, the issue of its rehabilitation is underway; indeed, the nutritional economic and ecological stakes of this consumption are strategic. It can be considered an important way to face the scarcity of natural resources, environmental pressures due to the increasing world population, and demand for protein. Tenebrio molitor larvae flour was recently approved by the European Food Safety Authority (EFSA) as a novel food. The aim of the present work was to create protein-rich healthy cracker from insect flour, achieving the claim “source of protein” with a target market focused on the healthy products for consumption on the go. Contents of T. molitor flour from 2 to 20% (%w/w) were tested, using a previously optimized formulation and the comparison in terms of nutritional, physical, and sensory properties with a standard formulation was performed. T. molitor incorporation allowed an improvement in the nutritional profile of snacks, through an increase of 15% in protein content and an enrichment in minerals (namely potassium, phosphorus, copper, and zinc). The crackers containing a 6% of insect flour were the most appreciated by the panelists. The incorporation of T. molitor induced a reduction in firmness and an increase in crispness, resulting from the impact of the protein on the structure. This aspect has a positive impact with respect of the acceptance of snacks—70% of the panelists consider the possibility to buy the crackers with 6% enrichment. A darkening of the samples with the increase in the incorporation of T. molitor flour was also observed, accompanied by a reduction of about 20% of the L* values. Globally, insect protein can play an important role in redesigning food diets, making them more sustainable, with less environmental impact and equally balanced.

A Review on the Commonly Used Methods for Analysis of Physical Properties of Food Materials

The chemical composition of any food material can be analyzed well by employing various analytical techniques. The physical properties of food are no less important than chemical composition as results obtained from authentic measurement data are able to provide detailed information about the food. Several techniques have been used for years for this purpose but most of them are destructive in nature. The aim of this present study is to identify the emerging techniques that have been used by different researchers for the analysis of the physical characteristics of food. It is highly recommended to practice novel methods as these are non-destructive, extremely sophisticated, and provide results closer to true quantitative values. The physical properties are classified into different groups based on their characteristics. The concise view of conventional techniques mostly used to analyze food material are documented in this work.

Effects of Catfish (Ictalurus punctatus) Bone Powder on Consumers’ Liking, Emotions, and Purchase Intent of Fried Catfish Strips

Catfish are the predominant U.S. aquacultural product. However, byproducts from filleting, including bones that are high in calcium, typically go to waste or are sold as a low-valued feed. This research evaluated the potential use of catfish bone powder (CBP; 21.07% calcium) as a food ingredient. Catfish fillet strips were dredged with a breading mix (CBPM) containing 0% (0CBPM), 10% (10CBPM), and 20% (20CBPM) CBP before frying. Consumers (N = 211) evaluated sensory liking (nine-point hedonic scale) and attribute intensity (JAR scale), emotions (check-all-that-apply), and purchase intent (PI, yes/no) of samples. Color and texture were measured instrumentally. CBP did not show any negative effects on liking scores, although crispiness was scored higher for 20CBPM (mean = 6.88) than 10CBPM (mean = 6.43). Positive emotions were most relevant to CBP-containing samples, with significantly higher rates of adventurous and understanding. Information about calcium fortification using CBP increased PI to 81.04% for the 10CBPM and 83.89% for the 20CBPM samples and showed a greater effect on Latin Americans/Hispanics than U.S. Americans. Consumers were not averse to the consumption of CBP which can contribute to sustainable nutrition through waste reduction. Successful calcium fortification of fried catfish dredged with 20% CBP did not compromise sensory liking and may be feasible in other products.

Effects of Shortening Replacement with Extra Virgin Olive Oil on the Physical-Chemical-Sensory Properties of Italian Cantuccini Biscuits

Olive oil is recognised for its beneficial effects on human health, mainly due to it containing oleic acid (a monounsaturated fatty acid), whereas fats of animal origin or margarine, which are often used in recipes for biscuit production, contain mainly saturated fatty acids. The aim of this study was to evaluate the shelf-life and physicochemical properties of biscuits and of the fats contained in original recipe Italian Cantuccini biscuits (50% cow's butter and 50% margarine). Additionally, the sensory properties of the biscuits were evaluated, including their colour, appearance, taste, flavour, texture and overall acceptability. At the same time, the fat composition of the original recipe was also modified to contain 30% cow's butter and 70% extra virgin olive oil, in order to replace an aliquot of the saturated fatty acid content with unsaturated fatty acids, in particular with one monounsaturated fatty acid, oleic acid. Colour (CIELab), water activity, relative humidity, hardness and fracturability analyses were conducted on Cantuccini biscuits. Colour (CIELab), free acidity, spectrophotometric characteristics, DPPH assay and fatty acid methyl ester (FAMEs) analyses were conducted on the fat extracted from Cantuccini biscuits prepared from both the original and modified recipes.

Effect of Die Configuration on the Physico-Chemical Properties, Anti-Nutritional Compounds, and Sensory Features of Legume-Based Extruded Snacks

Legumes are not valued by all consumers, mostly due to the prolonged soaking and cooking process they require. This problem could be solved by preparing legume-based ready-to-eat snacks. In this study, the effect of two different dies (circular and star-shaped, with cross-sections of 19.6 and 35.9 mm2, respectively) on the physico-chemical properties, anti-nutritional compounds, and sensory features of extruded breakfast snacks was determined. Extruded products were obtained from 100% legume flours of red lentil, faba bean, brown pea, and common bean. The extrusion-cooking conditions were 2.5 g/s feed rate; 160 ± 1 °C die temperature; 16 ± 1 g/100 g feed moisture, and 230 rpm screw speed. Star-shaped extrudates showed a lower expansion ratio, degree of starch gelatinization, and water solubility index, as well as higher bulk density, hardness, crunchiness, and lightness (L*) values. The oligosaccharides showed non univocal variations by changing the die, whereas phytates did not vary at all. The extrudates from lentil flour (richer in fiber) were the least preferred by sensory panelists, due to their hard texture. However, the spherical extrudates were preferred over the star-shaped product. These results emphasize the possibility of improving the physico-chemical and sensory properties of legume extrudates by selecting a proper die.

Chemical, Nutritional and Sensory Characteristics of Six Ornamental Edible Flowers Species

Ornamental edible flowers can be used as novel nutraceutical sources with valuable biological properties. The purpose of this study was to establish nutritional, chemical, and sensory characteristics, antioxidant capacity (AC), and the relationship between their bioactive components and AC. The selected flowers Begonia × tuberhybrida, Tropaeolum majus, Calendula officinalis, Rosa, Hemerocallis, and Tagetes patula, can be easily collected due to their larger size. Their methanolic extracts were spectrophotometrically determined for polyphenols, flavonoids, and AC. Mineral elements were analyzed by atomic-absorption spectroscopy; crude protein was quantified by the Kjeldahl method. Eventually, 30 panelists evaluated sensory properties in 11 attributes. In addition, this study may serve to popularize selected blossoms. In flowers the contents of minerals were in this order: K > Ca > P > Mg > Na > Zn > Mn > Fe > Cu > Mo. AC ranged between 4.11 and 7.94 g of ascorbic acid equivalents/kg of fresh mass. The correlation coefficients between AC-total phenolics and AC-total flavonoids were r = 0.73* and r = 0.58*, respectively. It is also possible to observe a strong correlation between mineral elements and bioactive compounds. Hemerocallis was rated as the best and most tasteful; additionally, it exhibited the highest AC, total phenolic and flavonoid contents.

Impact of freeze-drying conditions on the sensory perception of a freeze-dried orange snack

BACKGROUND

The health benefits provided by fruit mean that there is continuous interest in offering consumers new products to stimulate its consumption. To this end, dehydrated fruit snacks may be an interesting option. In this study, we evaluated the impact of freezing rate (slow and high), shelf temperature (40 and 50 °C), and working pressure (5 and 100 Pa) on the perception and acceptability of a freeze-dried orange snack obtained from an orange puree.

RESULTS

Of the different freeze-drying conditions studied, working pressure was the variable with the greatest effect. The lowest working pressure (5 Pa) led to samples being obtained with a slightly lower water content, which was perceived with higher citrus flavor and crispiest. The highest pressure (100 Pa) led to samples with a greater water content, perceived with a more yellow intense color. Nevertheless, there is no significant consumer preference for any of the different processed samples. The number of force peaks, which is positively correlated with the crispness, shows a significant and negative correlation (r = -0.91) with the water content of the sample.

CONCLUSION

The study revealed that considerations other than the sensory can determine the best conditions of the freeze-drying process with which to obtain an orange snack. The number of force peaks obtained from a penetration test may be proposed as a tool for instrumental analysis of the snack's crispness that supplies information closely resembling customer perception of this attribute. © 2021 Society of Chemical Industry.

Crispness, the Key for the Palatability of "Kakinotane": A Sensory Study with Onomatopoeic Words

Crispness is among the most important food textures that contribute significantly to palatability. This study investigated the association between the perceived crispness and palatability of five types of Japanese rice crackers known as “kakinotane.” Two experiments were conducted using the temporal dominance of sensations (TDS) and temporal drivers of liking (TDL) methods. As descriptors for the TDS evaluation, we used 10 Japanese onomatopoeias to indicate various attributes of crispness. We also measured the mastication sounds and electromyography (EMG) activity during mastication. Principal component analysis data revealed that principal component 1, representing moisture characteristics, contributed more than 60% in both experiments. The palatability of the stimulus, which was described as having a very soft, moist, and sticky texture, BETA-BETA, was significantly lower than the others. However, there was no significant relationship between the amplitude of mastication sound or EMG activity and palatability. We demonstrated that naïve university students can discriminate the fine nuances of the crispness of “kakinotane” using the TDS and TDL methods. Our findings also suggested that the onomatopoeias used as descriptors in the TDS method had a greater influence on describing the nuances of food texture than the physiological data.

Sum of variance for quantifying the variation of multiple sequential data for the crispness evaluation of chicken nugget

Crispness is one of the words most frequently used to describe the texture of fried or dried food in addition to being a key to the determination of freshness for many non-fried foods. In this study, a new feature value called the sum of variance was assessed for its contribution to the estimation of crispness. Dynamic time warping and its averaging algorithms were employed to determine the sum of variance from a set of sequential force data measured using an instrument. The sum of variance is a feature value that expresses the variance of multiple sequential data. In an experiment, seven chicken nugget samples were prepared, and five panels evaluated their texture according to six Japanese word descriptors. An instrument experiment determined the six feature values, including the sum of variance from the measurement data, whereas multiple linear regression was applied to determine the relationship between the sensory values and feature values. For three of the six textures, the sum of variance reduced the error between the sensory values and their estimated values by up to 50%, confirming that this feature contributes to the textural estimation of food crispness.

Effect of Serving Plate Types and Color Cues on Liking and Purchase Intent of Cheese-Flavored Tortilla Chips

Foods' overall liking (OL) and purchase intent (PI) are influenced by visual inputs, such as color cues and serving plate types. Cheese-flavored tortilla chips (CFTC) from two formulations (A and B) with a noticeable color difference (∆E = 4.81) were placed on different serving plates (plastic, foam, and paper) and presented monadically to N = 83 consumers using a randomized/balanced block design in two sessions. Consumers evaluated likings of overall visual quality, color, crunchiness, saltiness, overall flavor (OF), and OL using a 9-point-hedonic scale, attribute appropriateness on a 3-point-just-about-right (JAR) scale, and PI using a binomial (Yes/No) scale. Color differences between A and B influenced crunchiness and saltiness liking and perception, which together with OF liking and formulation, mainly determined OL of CFTC. Although having similar fracturability (N) and sodium content, formulation A had higher crunchiness and saltiness likings. PI was influenced by crunchiness, saltiness, and OF liking with 37, 49, and 60% increases in PI odds per liking-unit increase, respectively. Plate type had minimal effect on the sensory liking of CFTC. The brighter and less-yellow color of CFTC could positively influence liking of crunchiness and saltiness, which significantly contributed to OL and PI. These findings are useful to understand consumers' acceptability and perception of foods when varying visual inputs.

Broadband acoustic resonance dissolution spectroscopy as a rapid tool for the compositional analysis of food powders: A case study of edible salts

Broadband acoustic resonance dissolution spectroscopy (BARDS) is a novel method that can be used for the analysis of food-based powders, which are mainly characterized by their composition and particle morphology. This study aimed to evaluate BARDS for the compositional analysis of food powders. The changes in the BARDS spectra due to the changes in composition and particle morphology of fifteen salt mixtures (constituting of NaCl, KCl, and MgCl₂) in five particle size ranges were comprehensively studied. Moreover, different regression methods were utilized to estimate each mixture component content. The results revealed that the average time-frequency spectra of each mixture in a certain particle size class were highly distinct and allowed discrimination from others. The unique spectra of each salt mixture originated from the specific dissolution rate and degassing effect of each constitutive compound. Finally, the accurate prediction of each mixture component content confirmed the consistency and efficiency of the method.

Impact of different chicken meat production systems on consumers' purchase perception

1. The objective of this study was to evaluate specific sensory attributes of chicken meat from different production systems to evaluate the emotional responses related to information available on the packages, as well as to investigate consumers' perceptions regarding this information.2. The survey was conducted using the Temporal Dominance of Sensations analysis, which identified differences in taste and texture between samples belonging to the organic, conventional and natural systems.3. The specific emotional lexicon for chicken meat, defined by the consumers through the EmoSemio questionnaire, provided a list of positive emotions for packages that indicated some type of information about the rearing or feeding system.4. The qualitative data obtained using the Attitude Questionnaire demonstrated that packaging and labelling are not self-explanatory, posing more doubts for the consumer at the time of purchase. It was shown that packaging and labelling were extrinsic attributes that influenced the evaluation and acceptability of products. Besides that, consumers were interested in buying products that attest to animal welfare, provided that the price is attractive.5. Poultry companies can have a greater chance of making their products more attractive if they learn more about the attitude and expectations of the consumer in relation to the products, as well as the importance of the animal welfare attributes that are communicated.

Why Per Capita Apple Consumption Is Falling: Insights from the Literature and Case Evidence from South Tyrol

Per capita apple consumption is falling in many European countries while overall fruit intake is growing or is stable, and consumption of other fruits is increasing. The reasons for the consumption decline of the world’s third most produced fruit are unclear. Based on an extensive literature review and a logit regression of data from a postal survey of 153 apple consumers in South Tyrol, Italy, the purpose of this study is to explain this trend. We show that (i) the increasing average age of consumers, (ii) economic factors such as consumer incomes and apple prices in combination with other demographic characteristics at least for some population segments, (iii) the dissatisfaction of some consumers with available mainstream apple varieties, and (iv) the below-average nutrient content of apples as compared to other fruits for health-conscious consumers are among the main causes. For the European apple growing industry, the decline in local per capita apple consumption may not be an economic problem if the industry decides to focus on emerging markets in the future. However, innovating fruit quality and better satisfying apple consumer preferences in high-income markets may prove to be more challenging.

Texture Preferences of Chinese, Korean and US Consumers: A Case Study with Apple and Pear Dried Fruits

The present study aimed to understand the drivers of liking dried apple and pear chips with various textures among Chinese (n = 58), Korean (n = 58), and US (n = 56) consumers. The possibility of hedonic transfer from snack texture preferences to fruit-chip texture preferences was also investigated among Chinese and Koreans. Fourteen fruit-chip samples with four textural properties (crispy, puffy, soft, and jelly-like) were selected. Consumers rated their level of liking for each sample, and then they performed hedonic-based projective mapping with the same samples. In the hedonic texture transfer investigation, consumers rated their acceptance of nine snacks with various textures but possessing similar textures to those of dried fruit samples. The data were analyzed by ANOVA and multiple factor analysis. Most consumers disliked samples with a soft or jelly-like texture, while liked samples with a crispy texture. Cross-cultural differences were observed in the liking of puffy samples, with both Chinese and Koreans liking puffy samples as much as crispy ones for their melting characteristics in the mouth, while US consumers perceived the puffy samples as being Styrofoam-like and disliked them. Hedonic transfer was observed from snack texture preferences to fruit-chip. Individual texture preferences for snacks seem to significantly affect the texture preferences for fruit chips.

Gastronomic Paradigms in Contemporary Western Cuisine: From French Haute Cuisine to Mass Media Gastronomy

Thomas Kuhn brings the concept of "paradigm" as the fundamental engine in the progress of humanity. Kuhn defines paradigms as the set of formal theories, experiments and work methods that define a process (scientific, economic, social, and in this case, contemporary haute cuisine), in a given time. According to Kuhn, progress does not happen by gradual accumulation of knowledge, but rather by abrupt advances. In this review, the conceptual evolution experienced by contemporary gastronomy (from the French Revolution to today) is analyzed applying the paradigm structure in light of the scientific knowledge of each era. It is thus reviewed how the first and second gastronomic paradigms, proposed, respectively, by Carême and Escoffier and based on food smell and taste the first and the flavor of the sauces the second, have been replaced by the third and fourth paradigms, led, respectively, by the Nouvelle Cuisine in France and Ferrán Adriá in Spain, and in whose development touch, sight, and sound have become increasingly prominent in gastronomic pleasure. Finally, it is analyzed how new trends in gastronomy: (1) worldwide diffusion of the Spanish tapas; (2) globalization of ethnic and fusion cuisines; (3) the growing disappearance of the professional gastronomic critique and its replacement by mass media influencers; (4) the increase of sustainability in cooking with development of local-, vegan-, and paleo-cooking, comfort, and smart food and finally, (5) the growing role of social networks and the self-itis linked to photography or foodstagramming in the gastronomic experience are leading toward a new gastronomic paradigm based on the global socialization of classic gastronomy.

Microalgae as Functional Ingredients in Savory Food Products: Application to Wheat Crackers

Crackers are widely consumed snack foods and there is an increasing trend in adding functional ingredients to their composition. In the present work, the dried biomasses of four microalgae strains—Arthrospira platensis F&M-C256, Chlorella vulgaris Allma, Tetraselmis suecica F&M-M33, and Phaeodactylum tricornutum F&M-M40—were used as a source of proteins, antioxidants, and other bioactive molecules in artisanal wheat crackers. Two incorporation levels were tested: 2% (w/w) and 6% (w/w). The impact of microalgae addition was evaluated in terms of physical properties, biochemical composition, antioxidant activity, in vitro digestibility, and sensory characteristics. Microalgae crackers presented stable color and texture throughout eight weeks of storage. Microalgae crackers were slightly thinner and lighter than the control but presented a similar density in agreement with scanning electron microscope images, indicating that gas retention was not greatly affected by microalgae addition. Regarding biochemical composition, 6% A. platensis and C. vulgaris crackers presented a significantly higher protein content (13.2–13.5%), for which they could be claimed to be a “source of protein” according to the Regulation (EC) No. 1924/2006. A. platensis crackers showed the highest antioxidant activity and attained better sensory analysis scores. T. suecica and P. tricornutum crackers showed high phenolic content and antioxidant activity but attained low sensory scores mainly because of their unattractive fishy off-flavor.

Acoustic settings combination as a sensory crispness indicator of dry crispy food

Crispness is a critical attribute of quality for crispy products, which can be evaluated through both instrumental and sensory analyses. The aim of the study was to identify the best combination of settings of a device coupled to a texture analyzer for acoustic analysis in order to find strong correlations with the sensory texture. For that, nine commercial food products were submitted to force and acoustic (acoustic envelope detector) analyses, using two settings for acoustic data acquisition (gain 1 and gain 4), and two settings for acoustic data management (threshold 0.5 and 2.5). The products were also evaluated using texture descriptive sensory analysis. The gain changing from 1 to 4 (enhancing the test sensitivity) increased the number of acoustic peaks and reduced the sound pressure level. Changing the threshold from 0.5 to 2.5 (reducing the interference of background noise on the acquired data) reduced the number of acoustic peaks. The correlation between the instrumental and the sensory analysis showed gain 1 as the most adequate acoustic setting to obtain the acoustic parameters of products with different crispness intensities. Moreover, threshold 2.5 is the most appropriate for acoustic data collection. Therefore, sensory attributes and instrumental properties strong correlations indicate that texture analyzer in combination with the acoustic envelope detector is a good instrument to mimic human mastication and texture perception, through both force and sound stimuli. This study about dry crisp food may contribute to the literature and food industry, as well to future studies about wet crispy and crunchy foods.

Measurement of kinaesthetic properties of in-brine table olives by microstructure of fracture surface, sensory evaluation and texture profile analysis (TPA)

BACKGROUND

A series of transformations occur in olive fruit both during ripening and processing. In particular, significant changes in the microstructural composition affect the flavour, texture, nutrients and overall quality of the end product. Texture is one of the sensory quality attributes of greatest importance to consumer acceptance. In the present work, kinaesthetic properties of in-brine table olives of three cultivars of Olea europaea L. (Bella di Cerignola, Peranzana and Taggiasca cvs) were provided by several measurements of olive tissue texture by sensory, rheological and microstructural approaches.

RESULTS

Olives at the same stage of ripening and processed with the same technology, but belonging to different cultivars, showed significant differences at microstructural, sensorial and rheological levels. To describe the relationship between the three variables, multiple regression analysis and principal component analysis were chosen.

CONCLUSION

Differences in microstructure were closely related both in terms of hardness measured by texture profile analysis and hardness measured by sensory analysis. The information provided could be an aid for screening and training of a sensory panel. © 2018 Society of Chemical Industry.

Relating Food Engineering to Cooking and Gastronomy

Modern consumers are increasingly eating meals away from home and are concerned about food quality, taste, and health aspects. Food engineering (FE) has traditionally been associated with the industrial processing of foods; however, most underlying phenomena related to FE also take place in the kitchen during meal preparation. Although chemists have positively interacted with acclaimed chefs and physicists have used foods as materials to demonstrate some of their theories, this has not been always the case with food engineers. This review addresses areas that may broaden the vision of FE by interfacing with cooking and gastronomy. Examples are presented where food materials science may shed light on otherwise empirical gastronomic formulations and cooking techniques. A review of contributions in modeling of food processing reveals that they can also be adapted to events going on in pots and ovens, and that results can be made available in simple terms to cooks. Industrial technologies, traditional and emerging, may be adapted to expand the collection of culinary transformations, while novel equipment, digital technologies, and laboratory instruments are equipping the 21st-century kitchens. FE should become a part of food innovation and entrepreneurship now being led by chefs. Finally, it is suggested that food engineers become integrated into gastronomy's concerns about safety, sustainability, nutrition, and a better food use.

Drivers of Preference and Perception of Freshness in Roasted Peanuts (Arachis spp.) for European Consumers

Roasted peanuts are a popular snack in Europe, but their drivers of liking and perceived freshness have not been previously studied with European consumers. Consumer research to date has been focused on U.S. consumers, and only on specific peanut cultivars. In this study, 26 unique samples were produced from peanuts of different types, cultivars, origins, and with different process technologies (including baking, frying, and maceration). The peanut samples were subjected to sensory (expert panel, Spectrum^TM ) and instrumental analysis (color, headspace volatiles, sugar profile, large deformation compression tests, and graded by size) and were hedonically rated by consumers in The Netherlands, Spain, and Turkey (n > 200 each). Preference Mapping (PREFMAP) on mean liking models revealed that the drivers of liking are similar across the three countries. Sweet taste, roasted peanut, dark roast, and sweet aromas and the color b^* value were related to increased liking, and raw bean aroma and bitter taste with decreased liking. Further partial least square regression (PLSR) modeling of liking and perceived freshness against instrumental attributes showed that the color coordinates in combination with sucrose content and a select few headspace volatiles were strong predictors of both preference and perceived freshness. Finally, additional PLSR models focusing on the headspace volatiles only showed that liking and ''fresh'' attributes were correlated with the presence of several pyrroles in the volatile fraction, and inversely related to ''stale'' and to hexanal and 2-heptanone.

PRACTICAL APPLICATION

This study provides insight into which flavor, taste, and appearance attributes drive liking and disliking of roasted peanuts for European consumers. The drivers are linked back to analytical attributes that can be measured instrumentally, thereby reducing the reliance on costly sensory panels. Particular emphasis is placed on color as a predictor of preference, because of the low cost of the measuring equipment, it is available to even smaller producers. In addition to preference, the study also examines whether product attributes that drive perceived freshness exist. The results can be used to design products with high acceptability across several countries within Europe.

Relationships between morphometrical properties and the texture of an extrusion-expanded snack made from squid mantle (Dosidicus gigas)

The giant squid (Dosidicus gigas) is a species of commercial interest as a source of protein, and it can be developed into ready-to-eat food products, including expanded extrusion snacks (EES). EES are prepared primarily from starch; however, adding animal protein increases the nutritional contents. The objective of this study was to evaluate the effect of the protein-carbohydrate interactions on the physical and morphological characteristics of an EES made of squid mantle and potato-corn flour. The independent variable was the squid mantle content (40, 60, 80, and 100%) and two controls (0₁  = 100% potato, 0₂  = 100% corn). The expansion rate (ER) of the sample is significantly minor (p < .5) when the squid mantle content increases ER = 2.0, 1.8 1.4 to 40, 60, and 80%, respectively. In samples with more protein, crispness and crunchiness were reduced, whereas the hardness increased. Digital imaging analysis indicated that the interaction between protein and starch causes significant morphometric changes to the fractal dimension (2.665-2.739) and lacunarity (0.61-1.29). The results showed that it is possible to incorporate up to 60% squid mantle to prepare EES that possess texture and morphometric characteristics competitive in reported studies with snacks usually incorporating flours, corn, and wheat in the formulations.

PRACTICAL APPLICATIONS

The giant squid is a very attractive species because its meat has low caloric intake, high protein content, and is an important source of omega 3 fatty acids. Despite the desirable qualities of the squid meat its consumption is very low due to the low diffusion of the properties of its meat, acid, and ammoniacal flavor, rigid texture that requires prolonged cooking times and lack of alternatives of consumption. In Mexico, this type of squid is mainly destined for export as frozen mantle and products with little added value, which generates little economic benefit. Therefore, the results of this research may be of interest to the squid processing industry, which demands new forms of consumption of this marine species to increase their commercialization and added value.