Influence of Pulsed Electric Field onEscherichia coliandSaccharomyces cerevisiae

Pulsed electric field-assisted extraction of hesperidin from tangerine peel and its technological optimization through response surface methodology

BACKGROUND

Tangerine peel is rich in flavonoids, particularly hesperidin, which has anti-inflammatory, antioxidant and anticancer biological activities. However, it is often wasted during citrus processing. The current common extraction method for hesperidin is solvent extraction, which has the characteristics of low extraction rate and high contamination. The aim of this study was to investigate the effect of pulsed electric field-assisted alkali dissolution extraction, followed by an acidification precipitation method, on the extraction rate and structure of hesperidin from tangerine peel.

RESULTS

The results showed that the selected factors (material/liquid ratio, electric field intensity and pulse number) had a significant effect on the extraction yield. An optimum condition of 66.00 mL g-1, 4.00 kV cm-1 and 35.00 pulses gave the maximum amount (669.38 μg mL-1), which was consistent with the theoretically predicted value by software (672.10 μg mL-1), indicating that the extraction process was feasible. In addition, the purified extract was further identified as hesperidin from UV and NMR spectra.

CONCLUSION

An appropriate strength of pulsed electric field-assisted alkali dissolution extraction followed by an acidification precipitation method can effectively improve the extraction rate of orange peel, and the purity of the extracted orange peel is higher. Compared with the traditional extraction, the pulsed electric field-assisted extraction method may be a potential technology for hesperidin extraction, which is beneficial for the high-value utilization of citrus resources. © 2024 Society of Chemical Industry.

Effects of Pulsed Electric Field and High-Pressure Processing Treatments on the Juice Yield and Quality of Sea Buckthorn

Sea buckthorn juice has high nutritional value and a rich flavor that consumers enjoy. Traditional sea buckthorn thermal processing (TP) technology has problems such as low juice yield, poor quality, and poor flavor. Sea buckthorn berries are processed using a technique combining pulsed electric field (PEF) and high-pressure processing (HPP) to increase juice yield and study its impact on the quality and volatile aroma of sea buckthorn juice. Results have show that, compared with TP, under the condition of PEF-HPP, the juice yield of sea buckthorn significantly increased by 11.37% (p > 0.05); TP and PEF-HPP treatments could effectively kill microorganisms in sea buckthorn juice, but the quality of sea buckthorn juice decreased significantly after TP treatment (p > 0.05), whereas PEF-HPP coupling technology could maximally retain the nutrients of sea buckthorn juice while inhibiting enzymatic browning to improve color, viscosity, and particle size. The flavor of sea buckthorn juice is analyzed using electronic nose (E-nose) and gas chromatography-ion mobility spectrometer (GC-IMS) techniques, and it has been shown that PEF-HPP retains more characteristic volatile organic compounds (VOCs) of sea buckthorn while avoiding the acrid and pungent flavors produced by TP, such as benzaldehyde, (E)-2-heptenal, and pentanoic acid, among others, which improves the sensory quality of sea buckthorn juice. PEF-HPP technology is environmentally friendly and efficient, with significant economic benefits. Research data provide information and a theoretical basis for the sea buckthorn juice processing industry.

Effects of Voltage and Treatment Time of Pulsed Electric Field on Electroporation in Rhizoctonia solani

The pulsed electric field (PEF) of μs duration can induce electroporation by causing permanent damage to the membrane, leading to cell death. The microbe was treated by a homemade PEF generator instrument. The sterilization effect of PEF on the Rhizoctonia solani was observed by scanning electron microscope (SEM) and transmission electron microscope (TEM), and the leakage of the intracellular contents was measured with a conductometer and an ultraviolet spectrophotometer. The increases in the electrical conductivity and the optical density (OD) value indicated that the cell membrane was damaged, and the intracellular contents overflowed. As a result, according to our experimental conditions, the optimum condition was the high-pulsed electric voltage of 26 kV, and the treatment time was 4 min. It could be concluded that the PEF could damage the cell membrane, and the ratio of electroporation reached 100%, which provides a new method of killing R. solani efficiently.

Effects and impacts of technical processing units on the nutrients and functional components of fruit and vegetable juice

Fruit and vegetable juice (FVJ) has become a favorite beverage for all age groups because of its excellent sensory and nutritional qualities. FVJ has a series of health benefits such as antioxidant, anti-obesity, anti-inflammatory, anti-microbial and anti-cancer. Except for raw materials selection, processing technology and packaging and storage also play a vital role in the nutrition and functional components of FVJ. This review systematically reviews the important research results on the relationship between FVJ processing and its nutrition and function in the past 10 years. Based on the brief elucidation of the nutrition and health benefits of FVJ and the unit operation involved in the production process, the influence of a series of key technology units, including pretreatment, clarification, homogenization, concentration, sterilization, drying, fermentation and packaging and storage, on the nutritional function of FVJ was systematically expounded. This contribution provides an update on the impacts of technical processing units on the nutrients and functional components of FVJ and new perspectives for future studies.

Advances in pulsed electric stimuli as a physical method for treating liquid foods

There is a need for alternative technologies that can deliver safe and nutritious foods at lower costs as compared to conventional processes. Pulsed electric field (PEF) technology has been utilised for a plethora of different applications in the life and physical sciences, such as gene/drug delivery in medicine and extraction of bioactive compounds in food science and technology. PEF technology for treating liquid foods involves engineering principles to develop the equipment, and quantitative biochemistry and microbiology techniques to validate the process. There are numerous challenges to address for its application in liquid foods such as the 5-log pathogen reduction target in food safety, maintaining the food quality, and scale up of this physical approach for industrial integration. Here, we present the engineering principles associated with pulsed electric fields, related inactivation models of microorganisms, electroporation and electropermeabilization theory, to increase the quality and safety of liquid foods; including water, milk, beer, wine, fruit juices, cider, and liquid eggs. Ultimately, we discuss the outlook of the field and emphasise research gaps.

Sterilising effect of high power pulse microwave on Listeria monocytogenes

In the present work, Listeria monocytogenes was used as the target strain to investigate the sterilising potential and mechanism of high power pulse microwave (HPPM). Results showed that the inactivation was positively correlated with the pulse frequencies and operating times. The count of Listeria monocytogenes was decreased by 5.09 log CFU/mL under 200 Hz for 9 min, which was used as the optimised condition to further explore the sterilisation mechanism. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images showed that the L. monocytogenes cells of untreated group presented intact surfaces, clear boundary, and its intracellular contents distributed uniformly in the cytoplasm. Following treatment, the cell wall surfaces began to deform in small areas, and cell membranes were severely ruptured, thus resulting in the appearance of electron transmission areas. Extracellular protein and nucleic acid contents, represented by OD260 nm and OD280 nm, increased with the increase in operating time significantly. After treatment, SDS-PAGE profiles of whole-cell proteins displayed that the protein bands became lighter or even disappeared. Na+ K+-ATPase activities and intracellular ATP content decreased by 72.97 and 79.09%, respectively. This was consistent with the cell viability of L. monocytogenes observed by confocal laser scanning microscopy. Overall, the sterilisation mechanism of HPPM on L. monocytogenes may be caused by membrane damage, intracellular component leakage, and energy metabolism hindrance.

Possibility of Pulsed Electric Field and Essential Oil Pre-treatment, Microwave-air Dehydration to the Quality of the Dehydrated Sesban (Sesbania sesban) Flower

Non-heat ahead-treatment in advance of the main dehydration is essential to preserve the quality and ensure food safety. Pulsed electric field (PEF) utilizes a high-voltage electric field in a very short duration to inhibit microbes and enzymes while maintaining the most sensory and nutritional characteristics. For thermal sensitive components, the dehydration process should be performed at low temperatures. Freeze dehydration, vacuum dehydration required high cost for equipment, energy consumption, low quantity in long dehydration time. Microwave-air dehydration is considered as a promising alternative technical approach. Sesban (Sesbania sesban) flower contains numerous phytochemical components promoting health-benefit. However, it’s highly perishable after harvesting. Consumers enjoy the dried sesban flower as a healthy drink. This study examined the possibility of PEF ahead-treatment in microbial inhibition and enzymatic inactivation; essential oil and Microwave-air dehydration on retention of total phenolic content (TPC), vitamin C, 2,2 diphenyl-1-picrylhydrazyl of free radical scavenging (DPPH), ferric reducing antioxidant power (FRAP) of the dehydrated sesban flower. Research also monitored the microbial stability of the dehydrated sesban flower during 12 months of preservation. Results showed that PEF at pulse strength 1000 kV/cm, pulse duration 90 µs, pulse number 45 was remarkably inactivated polyphenol oxidase and peroxidase in raw material. Rosemary essential oil soaked for sesban flower before dehydration positively preserved the ascorbic acid, phenolic content and antioxidant capacity. These PEF and essential oil ahead-treatments strongly facilitated for the main Microwave-air dehydration. Among different air temperatures from 20°C to 40°C in microwave-air dehydration, the highest Vitamin C, TPC, DPPH and FRAP of the dried flower were recorded at air temperature from 20°C to 30°C with no significant difference. Meanwhile, airspeed 1.2 m/s showed the highest Vitamin C, TPC, DPPH and FRAP of the dried flower with no significant difference with airspeed 1.4 m/s and 1.6 m/s. There was no significant difference in Vitamin C, TPC, DPPH and FRAP of the dried flower by microwave power from 1.15 to 1.45W/g. Therefore, a combination of microwave and air dehydration at air temperature 25°C, airspeed 1.2 m/s, the microwave energy density of 1.45 W/g was recommended to better preserve vitamin C, TPC, DPPH, FRAP. Microbial stability of the dehydrated flower was also observed during 12 months of storage by 3 month-interval sampling. Coliform, yeast and mold criteria in dried product were stable within acceptable limits.

Effect of Pulsed Electric Field (PEF) on Bacterial Viability and Whey Protein in the Processing of Raw Milk

There is growing concern regarding the nutritional value of processed food products. Although thermal pasteurization, used in food processing, is a safe method and is widely applied in the food industry, food products lack quality and nutritional value because of the high temperatures used during pasteurization. In this study, the effect of pulsed electric field (PEF) processing on whey protein content and bacterial viability in raw milk was evaluated by changing the PEF strength and number of pulses. For comparison, traditional pasteurization techniques, such as low-temperature long-time (LTLT), ultra-high temperature (UHT), and microfiltration (MF), were also tested for total whey protein content, bacterial activity, and coliforms. We found that, after treatment with PEF, a significant decrease in total bacterial viability of 2.43 log and coliforms of 0.9 log was achieved, although undenatured whey protein content was not affected at 4.98 mg/mL. While traditional pasteurization techniques showed total bacterial inactivation, they were detrimental for whey protein content: β-lactoglobulin was not detected using HPLC in samples treated with UHT. LTLT treatment led to a significant decrease of 75% in β-lactoglobulin concentration; β-lactoglobulin content in milk samples treated with MF was the lowest compared to LTLT and UHT pasteurization, and ~10% and 27% reduction was observed.

Molecular Dynamics Simulation for Mechanism Elucidation of Food Processing and Safety: State of the Art

Molecular dynamics (MD) simulation is a useful technique to study the interaction between molecules and how they are affected by various processes and processing conditions. This review summarizes the application of MD simulations in food processing and safety, with an emphasis on the effects that emerging nonthermal technologies (for example, high hydrostatic pressure, pulsed electric field) have on the molecular and structural characteristics of foods and biomaterials. The advances and potential projection of MD simulations in the science and engineering aspects of food materials are discussed and focused on research work conducted to study the effects of emerging technologies on food components. It is expected by showing key case studies that it will stir novel developments as a valuable tool to study the effects of emerging food technologies on biomaterials. This review is useful to food researchers and the food industry, as well as researchers and practitioners working on flavor and nutraceutical encapsulations, dietary carbohydrate product developments, modified starches, protein engineering, and other novel food applications.

The mechanism of reduced IgG/IgE-binding of β-lactoglobulin by pulsed electric field pretreatment combined with glycation revealed by ECD/FTICR-MS

Bovine β-lactoglobulin (β-Lg) is a major allergen existing in milk and causes about 90% of IgE-mediated cow's milk allergies. Previous studies showed that pulsed electric field (PEF) treatment could partially unfold the protein, which may contribute to the improvement of protein glycation. In this study, the effect of PEF pretreatment combined with glycation on the IgG/IgE-binding ability and the structure of β-Lg was investigated. The result showed that PEF pretreatment combined with glycation significantly reduced the IgG and IgE binding abilities, which was attributed to the changes of secondary and tertiary structure and the increase in glycation sites and degree of substitution per peptide (DSP) value determined by electron capture dissociation Fourier transform ion cyclotron resonance mass spectrometry (ECD/FTICR-MS). Unexpectedly, glycation sites (K47, K91 and K135) added by two mannose molecules were identified in glycated β-Lg with PEF pretreatment. Moreover, the results indicated that PEF pretreatment at 25 kV cm^-1 for 60 μs promoted the reduction of IgG/IgE-binding capacity by increasing the glycation degree of β-Lg, whereas single PEF treatment under the same conditions markedly enhanced the IgG/IgE-binding ability by partially unfolding the structure of β-Lg. The results suggested that ECD/FTICR-MS could help us to understand the mechanism of reduction in the IgG/IgE-binding of β-Lg by structural characterization at the molecular level. Therefore, PEF pretreatment combined with glycation may provide an alternative method for β-Lg desensitization.