Solubility and structure of milk powders manufactured with the addition of disodium phosphate and tetrasodium pyrophosphate mixtures

Effects of casein phosphopeptides on thermal stability and sensory quality of whey protein emulsions containing calcium beta-hydroxy-beta-methylbutyrate

This study aimed to elucidate the effect of casein phosphopeptides (CPP) on the thermal stability and sensory quality of whey protein emulsions containing calcium beta-hydroxy-beta-methylbutyrate (WPEs-HMB-Ca). The interaction mechanism among CPP, HMBCa, and WP in the emulsions before and after autoclaving (121 °C, 15 min) was systematically investigated from macroscopic external and microscopic molecular perspectives. It was found that WPEs-HMB-Ca treated by autoclaving resulted in an increase in droplet size (d_4,3 = 24.09 μm) due to aggregation/flocculation of proteins, along with a stronger odor with higher viscosity, compared to those without autoclaving. When CPP:HMB-Ca = 1:25 (w/w) in the emulsion, the droplets exhibited a more uniform and consistent state in the emulsion. In addition, CPP was able to inhibit the formation of complex spatial network structures of proteins during autoclaving by binding with Ca²⁺, thus improving the thermal stability and storage stability of WPEs-HMB-Ca. This work might provide theoretical guidance for developing functional milk drinks with good thermal stability and flavor.

Development of low glycemic index instant Phirni (pudding) mix-its visco-thermal, morphological and rheological characterization

High amylose rice (HAR) and carboxymethyl cellulose (CMC) are the preferred choices for enhancement of resistant starch content and lowering of glycemic index in dairy desserts. The effects of different levels of skimmed milk powder (SMP): HAR flour (45:55 to 75:25) and CMC (0.1 to 1%) were investigated on physical characteristics of dry-mix and on texture profile parameters, resistant starch (RS), predicted glycemic index (pGI), glycemic load (GL) and overall acceptability of phirni (a traditional milk pudding). Design expert predicted SMP (70): HAR (30) and CMC (0.8%) as optimum levels for reducing the pGI and maximizing the RS content and other quality characteristics in phirni. RS content of phirni (4.38%) prepared from optimized dry-mix (ODM) was higher while pGI (48.12) and GL (7.50) were lower as compared to phirni prepared from market dry-mix (MDM). The visco-thermal properties of ODM and MDM also showed significant variations. Storage modulus (Gʹ) and loss modulus (Gʹʹ) indicated that ODM phirni was less solid than MDM phirni. Scanning electron micrographs showed fused structures in ODM, while coarse sheet like structures were observed across the surface of MDM. Thus, ODM can be a promising substitute for the available milk desserts for diabetic patients.

Homogenization and sodium hydrogen phosphate induced effect on physical and rheological properties of ultrafilterd concentrated milk

Ultrafiltration (UF) of buffalo skim milk (BSM) induces changes in its delicate protein-mineral equilibrium. Appling UF causes alteration in chemical composition of UF retentates as a function of protein concentration that adversely affect their physical and rheological properties. Hence, present investigation was targeted to evaluate the changes taking place in heat stability, ζ-potential, particle size, apparent viscosity, pH, turbidity and crossover temperature of storage (G') and loss (G″) modulus of high-protein BSM based UF retentates as a function of homogenization and sodium hydrogen phosphate (SHP) addition. The UF of BSM (heat treated at 85 ± 1 °C for 5 min), significantly increased (P < 0.05) the concentration of protein, fat and minerals, however, it decreased the concentration of lactose and water soluble minerals in UF retentates over BSM. The SHP addition significantly increased (P < 0.05) pH, crossover temperature of G' and G″, ζ-potential, while significantly decreased (P < 0.05) turbidity and particle size in most non-homogenized retentates. Heat coagulation time (HCT) of control and treated UF retentates were at par (P > 0.05) with each other, however, variations were observed in their viscosity values. Rheological behaviour of most of these UF retentates was efficiently described by Bingham model. The correlation among ζ-potential, particle size, apparent viscosity, pH, turbidity, HCT and crossover temperatures G' and G″ of evaluated samples was also established. Overall, this study concluded that 0.5-6% SHP addition in non-homogenized UF retentates, markedly improved their milk protein stability as advocated by higher ζ-potential, G' and G″ crossover temperature values.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13197-021-05097-2.

Updating insights into the rehydration of dairy-based powder and the achievement of functionality

Dairy-based powder had considerable development in the recent decade. Meanwhile, the increased variety of dairy-based powder led to the complex difficulties of rehydrating dairy-based powder, which could be the poor wetting or dissolution of powder. To solve these various difficulties, previous studies investigated the rehydration of powder by mechanical and chemical methods on facilitating rehydration, while strategies were designed to improve the rate-limiting rehydration steps of different powder. In this review, special emphasis is paid to the surface and structure of the dairy-based powder, which was accountable for understanding rehydration and the rate-limiting step. Besides, the advantage and disadvantage of methods employed in rehydration were described and compared. The achievement of the powder functionality was finally discussed and correlated with the rehydration methods. It was found that the surface and structure of dairy-based powder were decided by the components and production of powder. Post-drying methods like agglomeration and coating can tailor the surface and structure of powder afterwards to obtain better rehydration. The merit of the mechanical method is that it can be applied to rehydrate dairy-based powder without any addition of chemicals. Regarding chemical methods, calcium chelation is proved to be an effective chemical in rehydration casein-based powder.

The effect of drying temperature and sodium caseinate concentration on the functional and physical properties of spray-dried coconut milk

This study investigated the effect of drying temperature on the stability and quality of spray-dried coconut milk. A low concentration (1-2% w/w) of sodium caseinate (SC) was used as emulsifying agent with 8-9% of maltodextrin. The spray drying temperature was varied from 140 to 180 °C. Emulsions prepared at different SC concentration remained stable without phase separation for 24 h. Higher the SC concentration produced smaller-sized of droplet and powder particles. The spray dried coconut milk has a skin-forming structure. Emulsion with low concentration of SC (1% w/w) is unstable during atomisation process due to re-coalescence of fat. Adding SC to the emulsion reduce the moisture content to less than 5%. However, drying the emulsions at 180 °C gave negative impact to the powder properties. Some particles rupture and lead to high free fat content, high insolubility and larger fat droplet size. Presence of fleck is also noticed in the powder.