Starch content and physicochemical properties of green wheat starch

Preparation, Thermal Properties and Decomposition Course of Highly Resistant Potato Starch Graft Poly(Cinnamyl Methacrylate) Materials

The properties of starch graft poly(cinnamyl methacrylate) copolymers were presented. The "grafting from" method and different ratios of starch to methacrylic monomer were used. The copolymers with the maximum grafting percent (G: 55.3% ± 0.4) using a ratio of starch to methacrylic monomer of 1:3 were obtained. The heterogeneous, non-porous structure materials were prepared. They were characterized by significant lower swelling in polar solvents and moisture absorption but higher swelling in non-polar solvents compared to unmodified potato starch. The chemical resistance in acidic, alkaline and neutral environments for all the tested copolymers was significantly higher compared to the chemical resistance of potato starch. The tested copolymers decomposed in at least three main stages in inert conditions and in at least four main stages in oxidative conditions. Their pyrolysis with the emission of the mixture of volatiles such as aldehyde, acid, ester, alcohol, aromatic, alkene, alkane, H2O, CO2 and CO based on the TG/FTIR studies was proved. The oxidative decomposition included pyrolysis processes combined with oxidation and combustion reactions of volatiles and the formed residues. As a result, the emission of the unsaturated and saturated compounds with carbonyl, hydroxyl, carboxyl and/or ester groups, alkane, alkene, aromatics and its oxidized forms, H2O, CO2 and CO, was observed.

Microstructure of starch complexes coated with arabinoxylans and β-glucans: Effect on gelatinization and digestion properties

Research has shown that the presence of a complete cell wall structure in the grain endosperm reduces the digestibility of grains (starch) in the human body. In this study, composite structures of diverse contents of arabinoxylan (AX) and β-glucan (BG) in combination with wheat starch were constructed to simulate the grid structure formed by the combination of starch granules wrapped within cell walls in the starch endosperm. The gel properties following gelatinization and aging of the complexes were analyzed using rheology, differential scanning calorimetry, X-ray scanning, and infrared spectroscopy. Based on this, the differences in the in vitro digestion process of starch complexes were investigated, and the digestion mechanism was explored to offer a theoretical basis for the development of starch-based foods with a low glycemic index. The synergistic effect of AX and BG was found to promote the entanglement and aggregation of molecules, AX and BG inhibits the gelatinization of starch. AX/BG (10 % blend proportion) significantly inhibited starch digestion in the starch complexes, with the lowest hydrolysis rate (76.7 %), which may be because AX and BG wrap the starch particles effectively.

Structural characterization of squash polysaccharide and its effect on STZ-induced diabetes mellitus model in MIN6 cells

A novel natural water-soluble acidic polysaccharide (PWESP-3) was isolated from squash with a molecular mass of 140.519 kDa, which was composed of arabinose (Ara, 35.30 mol%), galactose (Gal, 61.20 mol%), glucose (Glc, 1.80 mol%), and Mannuronic acid (ManA, 1.70 mol%) and contained Araf-(1→, →3)-Araf-(1→, →5)-Araf-(1→, Glcp-(1→, Galp-(1→, →3,5)-Araf-(1→, →2)-Glcp-(1→, →2)-Manp-(1→, →3)-Glcp-(1→, →4)-Galp-(1→, →3)-Galp-(1→, →6)-Galp-(1→, →3,4)-Galp-(1→, →4,6)-Galp-(1→ residues in the backbone. Moreover, the structure of PWESP-3 was identified by NMR spectra. The branch chain was connected to the main chain by the O-3 and O-4 atom of Gal. In addition, the effect of PWESP-3 on STZ-induced type I diabetes mellitus model in MIN6 cells was investigated. The results showed that PWESP-3 can increase the viability and insulin secretion of MIN6 cells and reduce the oxidative stress caused by ROS and NO. Meanwhile, PWESP-3 can also reduce the content of ATP, Ca2+, mitochondrial membrane potential and Caspase-3 activity in MIN6 cells. Furthermore, treatment with PWESP-3 can prevent single or double stranded DNA breaking to form DNA fragments and improve DNA damage in MIN6 cells, thereby avoiding apoptosis. Therefore, the above data highlight that PWESP-3 can improve the function of insulin secretion in STZ-induced MIN6 cells in vitro and can be used as an alternative food supplement to diabetes drugs.

Effects of synergistic action on rheological and thermal properties of potato starch complexes co-gelatinized with caffeic acid and squash polysaccharides extracted with water and subcritical water

In order to broaden the application range of squash polysaccharide (WESP/SWESP) and caffeic acid (CAA) and improve the quality of potato starch (PS) products, the effects of WESP/SWESP and CAA on the gelatinization, rheology, thermodynamics, microstructure and in vitro digestion of PS were investigated. Meanwhile, the synergistic effect of WESP/SWESP and CAA on PS was further analyzed. Differently, due to WESP and SWESP had different monosaccharide composition and structure, they had different effects on the system. Pasting properties results showed that the presence of WESP/SWESP and CAA significantly reduced the peak viscosity, trough viscosity, breakdown viscosity and final viscosity of PS, especially under the combined action. In rheological tests, all sample gels belonged to the pseudoplastic fluids and weak gel system (tan δ < 1). Besides, thermodynamic properties revealed that WESP/SWESP and CAA synergistic effect had better retrogradation delay effect. In the ternary system, WESP/SWESP, CAA and PS can form a new network structure and improve the stability of the gel system. In addition, the results of infrared spectroscopy, Raman spectroscopy, x-ray diffraction and scanning electron microscopy exhibited that the ternary system can promote the accumulation and winding of the spiral structure of PS chain, and make the structure of PS gel network more orderly and stable. Furthermore, compared with PS gel, the ternary system had lower RDS and higher SDS and RS content, suggesting that the addition of WESP/SWESP and CAA at the same time was more conducive to reducing the hydrolysis rate of PS. This work revealed the interaction between WESP/SWESP, CAA and PS, which improved the physicochemical and digestive properties of PS. It will provide a theoretical basis for improving the quality of potato starch-related products and developing functional foods.

The Effects of Tremella fuciformis Polysaccharide on the Physicochemical, Multiscale Structure and Digestive Properties of Cyperus esculentus Starch

In this study, we have investigated the effects of Tremella fuciformis polysaccharide (TP) on the pasting, rheological, structural and in vitro digestive properties of Cyperus esculentus starch (CS). The results showed that the addition of TP significantly changed the pasting characteristics of CS, increased the pasting temperature and pasting viscosity, inhibited pasting, reduced the exudation of straight-chain starch and was positively correlated with the amount of TP added. The addition of the appropriate amount of TP could increase its apparent viscosity and enhance its viscoelasticity. The composite system of CS/TP exhibited higher short-range ordered structure and solid dense structure, which protected the crystal structure of CS, but was related to the amount of TP added. In addition, the introduction of TP not only decreased the in vitro digestion rate of CS and increased the content of slow-digestible starch (SDS) and resistant starch (RS), but also reduced the degree of digestion. Correlation studies established that TP could improve the viscoelasticity, relative crystallinity and short-range order of the CS/TP composite gel, maintain the integrity of the starch granule and crystalline structure, reduce the degree of starch pasting and strengthen the gel network structure of CS, which could help to lower the digestibility of CS.

Comprehensive Assessment of Polysaccharides Extracted from Squash by Subcritical Water under Different Conditions

The effects of subcritical water microenvironment on the physiochemical properties, antioxidant activity and in vitro digestion of polysaccharides (SWESPs) from squash were investigated. After single-factor experiments, twenty samples were successfully prepared at different extraction temperatures (110, 130, 150, 170 and 190 °C) and extraction times (4, 8, 12 and 16 min). Under a low temperature environment, the whole process was mainly based on the extraction of SWESP. At this time, the color of SWESP was white or light gray and the molecular mass was high. When the temperature was 150 °C, since the extraction and degradation of SWESP reached equilibrium, the maximum extraction rate (18.67%) was reached at 150 °C (12 min). Compared with traditional methods, the yield of squash SWESP extracted by subcritical water was 3-4 times higher and less time consuming. Under high temperature conditions, SWESPs were degraded and their antioxidant capacity and viscosity were reduced. Meanwhile, Maillard and caramelization reactions turned the SWESPs yellow-brown and produced harmful substances. In addition, different SWESPs had different effects on in vitro digestion. In brief, SWESPs prepared under different conditions have different structures and physicochemical properties, allowing the obtainment of the required polysaccharide. Our results show that squash polysaccharides prepared in different subcritical water states had good development potential and application in the food industry.

3D printed arrowroot starch-gellan scaffolds for wound healing applications

Skin, the largest organ in the body, blocks the entry of environmental pollutants into the system. Any injury to this organ allows infections and other harmful substances into the body. 3D bioprinting, a state-of-the-art technique, is suitable for fabricating cell culture scaffolds to heal chronic wounds rapidly. This study uses starch extracted from Maranta arundinacea (Arrowroot plant) (AS) and gellan gum (GG) to develop a bioink for 3D printing a scaffold capable of hosting animal cells. Field emission scanning electron microscopy (FE-SEM) and X-ray diffraction analysis (XRD) prove that the isolated AS is analogous to commercial starch. The cell culture scaffolds developed are superior to the existing monolayer culture. Infrared microscopy shows the AS-GG interaction and elucidates the mechanism of hydrogel formation. The physicochemical properties of the 3D-printed scaffold are analyzed to check the cell adhesion and growth; SEM images have confirmed that the AS-GG printed scaffold can support cell growth and proliferation, and the MTT assay shows good cell viability. Cell behavioral and migration studies reveal that cells are healthy. Since the scaffold is biocompatible, it can be 3D printed to any shape and structure and will biodegrade in the requisite time.

Effects of zucchini polysaccharide on pasting, rheology, structural properties and in vitro digestibility of potato starch

Zucchini polysaccharide (ZP) has a unique molecular structure and a variety of biological activities. This study aimed to evaluate the effects of ZP (1, 2, 3, 4 and 5 %, w/w) on the properties of potato starch (PS), including pasting, rheological, thermodynamic, freeze-thaw stability, micro-structure, and in vitro digestibility of the ZP-PS binary system. The results showed that the appearance of ZP significantly reduced the peak, breakdown, final and setback viscosity and prolonged the pasting temperature of PS, whereas increased the trough viscosity. The tests of rheological showed that ZP had a damaging effect on PS gels. Meanwhile, the results of thermodynamic and Fourier transform infrared exhibited that the presence of ZP significantly retarded the retrogradation of PS, especially at a higher levels. The observation of the microstructure exhibited that ZP significantly altered the microscopic network structure of the PS gels, and ZP reduced the formation of the gel structure. Besides, ZP postponed the retrogradation process of PS gels. Moreover, ZP weakened the freeze-thaw stability of the PS gel. Furthermore, ZP also can decrease the digestibility and estimated glycemic index (eGI) value of PS from 86.04 % and 70.89 to 77.67 % and 65.22, respectively. Simultaneously, the addition of ZP reduced the rapidly digestible starch content (from 25.09 % to 16.59 %) and increased the slowly digestible starch (from 24.99 % to 26.77 %) and resistant starch content (from 49.92 % to 56.64 %). These results have certain guiding significance for the application of ZP in starch functional food.

Oleogels based on germinated and non-germinated wheat starches and orange essential oil: Application as a hydrogenated vegetable fat replacement in bread

This study aimed to produce oleogels based on non-germinated and germinated wheat starches with orange essential oil, apply them to replace hydrogenated vegetable fat in bread, and assess the antifungal action. The oleogels were prepared using sunflower oil, wheat starches, beeswax, water, and orange essential oil (OEO). They were evaluated to determine the volatile compounds, oil binding capacity, texture profile, storage stability for 20 days, thermogravimetric analysis, and functional groups. The breads were evaluated by their moisture content, specific volume, texture profile, volatile compounds, and microbiological contamination during 15 days of storage. The oleogels showed high storage stability, were fully intact after 20 days of storage, and had a high oil binding capacity (∼100 %). The oleogels with OEO presented increased adhesiveness and reduced hardness compared to the ones without essential oil. The oleogels with OEO based on germinated wheat starch released a high amount of volatile compounds. Substituting saturated vegetable fat with oleogels in bread formulation resulted in decreased hardness and maintained specific volume. Furthermore, incorporating OEO oleogels in the bread led to reduced growth of total mesophiles and fungi.

Mechanical properties and water resistance improvement of thermoplastic modified starch, carboxymethyl cellulose, and zinc oxide nanometal particles by reactive blending

Novel biodegradable thermoplastic starch (TPS) with high mechanical properties and water resistance was developed using reactive blending technique. Effect of zinc oxide (ZnO) addition to TPS properties and reaction was investigated. Thermoplastic modified starch (TPMS) was prepared by melt-mixing modified starch with glycerol 70/30%wt/wt. Carboxy methyl cellulose (CMC) 5%wt was incorporated with modified starch, glycerol, and zinc oxide (ZnO) 0-5 %wt. Fourier-transform infrared (FTIR) spectroscopy analysis confirmed the formation of the carboxyl anion (OZn) between the -COO- of CMC and the free Zn+ ion of ZnO. The tensile strength of the TPMS/CMC/ZnO blend increased 7 time with ZnO 5 % (14 MPa) addition compared to TPMS (2 MPa). The color (∆E) of TPMS/CMC/ZnO differed notably at high ZnO concentrations (1-5 %wt). The TPMS/CMC blend displayed a smooth fracture surface due to the miscibility of the materials. Small particles of ZnO dispersed finely in the TPMS matrix and increased the interfacial tension and water contact angle of the blends. The miscibility of TPS with CMC and the occurrence of ionic interactions of -COO- of CMC and -OH of starch with the Zn+ ion as physical crosslinking were indicated to improve the mechanical properties and water resistance of the blends.

Characteristics of the composite film of arabinoxylan and starch granules in simulated wheat endosperm

We found that cell wall components of wheat grains differed significantly across different grain-filling stages; specifically, we observed significant differences in water content and water migration rate (p < 0.05). A composite film of arabinoxylan and starch granules was prepared to simulate wheat endosperm structure. Scanning electron microscopy (SEM), X-ray diffractometer (XRD), and thermogravimetric analysis (TGA) showed that the crystallinity and structural stability of the film increased with increasing starch content. Water diffusion experiments of the films revealed that the water diffusion rate gradually decreased with increasing starch content. Therefore, the water mobility of the starch endosperm was lower than that of the aleurone layer. These findings provide a basis for further studies in the context of wheat grain water regulation.

Thermo-sensitive amylase-starch double-layer polymer nanoparticles with self-polishing and protein corona-free property for drug delivery applications

Protein corona formation can lead to obstructive screening of targeting groups of nanoparticles (NPs). Also, the targeting groups are subjected to physiochemical interactions when exposed to solvents. Here, these two factors can influence NP targeting efficiency. Therefore, it is necessary to prepare a general method of preparing an anti-fouling NPs with protected targeting groups. Here, we designed α-amylase-starch double-layer coated poly (methyl methacrylate-co-acrylic acid) NPs (α-ams-SCMMA NPs), functionalized with aptamer targeting groups and doped with Tetrakis(para-hydraoxylphenyl) porphyrin (TPPOH) as a payload drug. Natural polysaccharide starch and enzyme α-amylase were applied here for thermo-sensitive activation of starch hydrolyzation in order to render the NPs' self-polishing from protein corona effects. During incubation with serum media, the protein corona was formed at the exterior shell of NPs, while the self-polishing process was activated to remove the "protein fouling" when the incubation temperature increased to 37 °C (body temperature). Mechanistically, the starch layer of α-ams-SCMMA NPs was readily hydrolysed by α-amylase, whereby the adsorbed protein corona could be efficiently eliminated and the targeting groups were then presented. With this unique self-polishing NP design, we believe our method can be applied for potential NP applications in cancer therepy due to excellent antifouling property and protected targeting groups.

Study on the in vitro digestion process of green wheat protein: Structure characterization and product analysis

In this study, the in vitro digestion process of green wheat protein (GWP) was explored by simulating the gastrointestinal digestion. The digestibility of GWP was 65.23%, and was mainly digested by trypsin. During the digestion process of GWP, large-size particles are digested by pepsin, and medium-sized particles are digested by trypsin into smaller particles; irregular large block structure with smooth surface was gradually turned into smaller blocks with porous surface; and the spatial conformation was loosened mainly by the unfolding of β-sheet structure. Gel electrophoresis demonstrated that HMW glutenin and ω-gliadins in GWP were completely digested, while LMW glutenin and α/β/γ-gliadins were partially digested. Additionally, the peptide lengths were relatively dispersed after pepsin digestion. Most of the peptides (76.5%) fell into the range 3-15 amino acid after pepsin and trypsin digestion. The molecular weight (MW) of most pepsin digestion products was above 2000 Da, whereas the MW of trypsin digestion products was mainly concentrated in 500-2000 Da. Besides, the sensitizing peptide sequence of wheat protein was detected in the final digestion products of GWP. This research provided a theoretical guidance for the development and application of GWP.

Degradation by Electron Beam Irradiation of Some Composites Based on Natural Rubber Reinforced with Mineral and Organic Fillers

Composites based on natural rubber reinforced with mineral (precipitated silica and chalk) and organic (sawdust and hemp) fillers in amount of 50 phr were obtained by peroxide cross-linking in the presence of trimethylolpropane trimethacrylate and irradiated by electron beam in the dose range of 150 and 450 kGy with the purpose of degradation. The composites mechanical characteristics, gel fraction, cross-linking degree, water uptake and weight loss in water and toluene were evaluated by specific analysis. The changes in structure and morphology were also studied by Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy. Based on the results obtained in the structural analysis, possible mechanisms specific to degradation are proposed. The increasing of irradiation dose to 450 kGy produced larger agglomerated structures, cracks and micro voids on the surface, as a result of the degradation process. This is consistent with that the increasing of irradiation dose to 450 kGy leads to a decrease in crosslinking and gel fraction but also drastic changes in mechanical properties specific to the composites’ degradation processes. The irradiation of composites reinforced with organic fillers lead to the formation of specific degradation compounds of both natural rubber and cellulose (aldehydes, ketones, carboxylic acids, compounds with small macromolecules). In the case of the composites reinforced with mineral fillers the degradation can occur by the cleavage of hydrogen bonds formed between precipitated silica or chalk particles and polymeric matrix also.

Homogalacturonan from squash: Characterization and tau-binding pattern of a sulfated derivative

A pectic polysaccharide (WAP) was isolated from squash and identified as a homogalacturonan with a molecular mass of 83.2 kDa by GPC, monosaccharide composition analysis, FT-IR and NMR spectra. Sulfation modification of WAP was carried out and a sulfated derivative (SWAP) was obtained with a substitution degree of 1.81. The NMR spectrum indicated that the sulfation modification mainly occurred at the C-2 and C-3 positions of galacturonan residues. The binding pattern of SWAP to tau K18 protein was observed in 2D 1H15N HSQC spectra of tau, which resembled the tau-heparin interaction, with R2 domain as the major binding region. These results suggest that SWAP has the potential to act as a heparin mimic to inhibit the transcellular spread of tau; thus natural polysaccharide from squash may be developed into therapies for AD and related tauopathies.

Starch/Polyaniline Biopolymer Film as Potential Intelligent Food Packaging with Colourimetric Ammonia Sensor

The use of petroleum-based plastics in food packaging leads to various environmental impacts, while spoilage of food and misinterpretation of food-date labelling account for food insecurity; therefore, a biopolymer capable of indicating food edibility is prepared to resolve these issues. In this research, starch/polyaniline (starch/PANI) biopolymer film was synthesised and investigated as an ammonia sensor for potential application as intelligent food packaging. FT-IR and XRD were used to confirm the composition of the biopolymer films, while UV-Vis spectrometry was applied to identify the oxidation state of PANI in emeraldine form. PANI was successfully incorporated into the starch matrix, leading to better thermal stability (TGA) but decreasing the crystallinity of the matrix (DSC). The performance of the polymer-film sensor was determined through ammonia-vapour sensitivity analysis. An obvious colour change from green to blue of starch/PANI films was observed upon exposure to the ammonia vapour. Starch/PANI 0.4% is the optimum composition, having the best sensor performance with good linearity (R2 = 0.9459) and precision (RSD = 8.72%), and exhibiting excellent LOD (245 ppm). Furthermore, the starch/PANI films are only selective to ammonia. Therefore, the starch/PANI films can be potentially applied as colourimetric ammonia sensors for intelligent food packaging.

Analysis of volatile flavor compounds of green wheat under different treatments by GC-MS and GC-IMS

Volatile components in green wheat under different treatments including raw, washing, blanching, precooling, freezing, steaming, boiling, frying, and freeze-drying were evaluated by gas chromatography-ion mobility spectroscopy (GC-IMS) and gas chromatography-mass spectrometry (GC-MS). Five key aroma substances including n-hexanal, benzaldehyde, nonanal, 2-pentylfuran, and (E)-oct-2-enal were found by Venn diagram and odor activity values (OAV). Furthermore, according to volatile fingerprints characteristics and the aroma profile of sensory evaluation, it was found that green wheat under different treatments mainly presented seven characteristic flavor notes including sweet flowers, fat fragrance, mushroom hay, waxy aldehyde, citrus fruity, vegetable-like bean, and bitter almond from the sensory evaluation, and they could be divided into four categories, which was consistent with the results of PCA and GC-IMS. Hence, the volatile compounds of green wheat samples could be visualized and identified quickly via GC-IMS and the samples could be clearly classified based on the difference of volatile compounds. PRACTICAL APPLICATIONS: In the study, fingerprints coupled with cluster analysis were a visualized method for the identification of volatile compounds. Meanwhile, a new method, Venn diagram with OAV, was used to identify the key aroma of products. Finally, a rapid method to classify products by GC-IMS was performed. In future practical applications, GC-IMS can be used to classify products from different origins and different manufacturers. Similarly, it can identify fake and inferior products and whether the products have deteriorated. In addition, this research will provide a new strategy to find the relationship between flavor compounds and various processed technologies toward different cereals.

Electron Beam Irradiation: A Method for Degradation of Composites Based on Natural Rubber and Plasticized Starch

Polymeric composites based on natural rubber (NR) and plasticized starch (PS) obtained by peroxide cross-linking have been subjected to electron beam irradiation in order to investigate their degradation. The amount of PS ranged from 10 to 50 phr and the irradiation dose from 150 to 450 kGy. Irradiation was performed in atmospheric conditions using a linear electron accelerator of 5.5 MeV. Changes in chemical, physical, structural, and morphological properties of composites were correlated with variables, such as PS loading and irradiation dose. Thus, mechanical properties, gel fraction, cross-linking degree, water uptake, weight loss in toluene/water were compared with those obtained before irradiation. The changes in structure and morphology were studied by Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy. Both PS loading and irradiation dose were found to be responsible for the degradation installing. Moreover, it has been shown that at the dose of 450 kGy, chain scission is dominant over cross-linking.

The combined impact of protein corona-free property of starch coated poly (methyl methacrylate) nanoparticles: Amylose content and surface charge

The protein corona on nano drug carriers is an important well-known biological issue that often induce biological incompatibility and screens the targeting molecules on the surfaces of carriers, therefore, the design of NPs with good protein corona-free property is highly desired and challenged. The natural polysaccharide has been demonstrated as one types of stealth materials after the functional group modification process, but the types and structures of their chains has never been considered. Here, we have designed five types of core-shell starch-coated poly (methyl methacrylate) nanoparticles and we found the starch coated NPs with low amylose content (<15%) could exhibit the excellent protein corona-free property without any modification and the starch with high amylose content coated NPs can also exhibit protein corona-free property after etherifying the surface of NPs to positive surface charge. Therefore, the combined impact of both low amylose content and positive surface charges by etherification modification of the starch can provide the excellent protein corona-free property for starch coated polymer NPs, that is very promising for highly efficient nano drug carries and marine coatings.