Effects of structural components of artificial turf on the transmission of impacts in football players

Relationship between muscular extensibility, strength and stability and the transmission of impacts during fatigued running

The aim was to analyse the relationship between isokinetic strength, dynamic stability, muscular extensibility and impacts transmission during fatigued running. Low- and high-frequency impacts-related to body movements and the severity of impacts, respectively-were assessed in 17 male recreational runners, before and after a treadmill running fatigue protocol, using a triaxial accelerometry system. High-frequency impacts in the tibia were negatively correlated to the knee angle at which the quadriceps peak torque was reached (p = 0.014), and also to the extensibility of the hamstrings and soleus (p = 0.001 and p = 0.023, respectively). The increases of high-frequency impacts in tibia caused by fatigue were positively related to the knee angle at which the hamstrings peak torque was reached (p = 0.001) and to stability after landing (p = 0.007). The attenuation of high-frequency impacts was positively related to hamstrings/quadriceps ratio of strength (p = 0.010) and to stability (p = 0.006). Limiting possible deficits in hamstring and soleus range of motion, improving stability after landing, developing hamstring and quadriceps strength in elongated muscle range, and maintaining a balanced ratio of hamstring/quadriceps strength could help to reduce the injury risk in running.

Effects of Central and Peripheral Fatigue on Impact Characteristics during Running

Fatigue and impact can represent an injury risk factor during running. The objective of this study was to compare the impact transmission along the locomotor system between the central and peripheral fatigued states during running. Tibial and head acceleration as well as shock attenuation in the time- and frequency-domain were analyzed during 2-min of treadmill running in the pre- and post-fatigue state in eighteen male popular runners (N = 18). The impact transmission was measured before and after a 30-min central fatigue protocol on the treadmill or a peripheral fatigue protocol in the quadricep and hamstring muscles using an isokinetic dynamometer. The time-domain acceleration variables were not modified either by peripheral or central fatigue (p > 0.05). Nevertheless, central fatigue increased the maximum (p = 0.006) and total (p = 0.007) signal power magnitude in the high-frequency range in the tibia, and the attenuation variable in the low- (p = 0.048) and high-frequency area (p = 0.000), while peripheral fatigue did not cause any modifications in the frequency-domain variables (p > 0.05). Furthermore, the attenuation in the low (p = 0.000)- and high-frequency area was higher with central fatigue than peripheral fatigue (p = 0.003). The results demonstrate that central fatigue increases the severity of impact during running as well as the attenuation of low and high components.

Is This the Real Life, or Is This Just Laboratory? A Scoping Review of IMU-Based Running Gait Analysis

Inertial measurement units (IMUs) can be used to monitor running biomechanics in real-world settings, but IMUs are often used within a laboratory. The purpose of this scoping review was to describe how IMUs are used to record running biomechanics in both laboratory and real-world conditions. We included peer-reviewed journal articles that used IMUs to assess gait quality during running. We extracted data on running conditions (indoor/outdoor, surface, speed, and distance), device type and location, metrics, participants, and purpose and study design. A total of 231 studies were included. Most (72%) studies were conducted indoors; and in 67% of all studies, the analyzed distance was only one step or stride or <200 m. The most common device type and location combination was a triaxial accelerometer on the shank (18% of device and location combinations). The most common analyzed metric was vertical/axial magnitude, which was reported in 64% of all studies. Most studies (56%) included recreational runners. For the past 20 years, studies using IMUs to record running biomechanics have mainly been conducted indoors, on a treadmill, at prescribed speeds, and over small distances. We suggest that future studies should move out of the lab to less controlled and more real-world environments.

Acute Effects on Impact Accelerations Running with Objects in the Hand

Amateur runners usually run carrying implements in their hands (keys, a mobile phone, or a bottle of water). However, there is a lack of literature about the effects of different handloads on impact accelerations. Thus, this study aimed to analyse the effects of carrying different objects in the hand on impact accelerations during running. Nineteen male recreational runners (age 24.3 ± 6.8 years, training volume of 25 ± 7.38 km/week) performed twenty minutes of running on a treadmill at 2.78 m/s with four different conditions: no extra weight, with keys, with a mobile phone, and with a bottle of water. Impact acceleration and spatio-temporal parameters were analysed through a wireless triaxial accelerometry system composed of three accelerometers: two placed in each tibia and one placed on the forehead. A higher tibia acceleration rate in the dominant leg was observed when participants ran holding both a mobile phone (p = 0.027; ES = 0.359) and a bottle of water (p = 0.027; ES = 0.359), compared to no extra weight. No changes were observed in peak acceleration, acceleration magnitude, and shock attenuation in any other conditions. Likewise, neither stride frequency nor step length was modified. Our results suggest that recreational runners should not worry about carrying objects in their hands, like a mobile phone or a bottle of water, in short races because their effect seems minimal.

Validity and Reliability of an Instrumented Treadmill with an Accelerometry System for Assessment of Spatio-Temporal Parameters and Impact Transmission

Running retraining programs focused on concurrent feedback of acceleration impacts have been demonstrated to be a good strategy to reduce running-related injuries (RRI), as well as to improve running economy and reduce acceleration impacts and injury running incidence. Traditionally, impacts have been registered by mean of accelerometers attached directly to the athletes, which is inaccessible to the entire population, because it requires laboratory conditions. This study investigated the validity and reliability of a new device integrated directly into the treadmill, compared to a traditional acceleration impact system. Thirty healthy athletes with no history of RRI were tested on two separate days over the instrumented treadmill (AccTrea) and simultaneously with an acceleration impact system attached to the participant (AccAthl). AccTrea was demonstrated to be a valid and reliable tool for measuring spatio-temporal parameters like step length (validity intraclass correlation coefficient (ICC) = 0.94; reliability ICC = 0.92), step time (validity ICC = 0.95; reliability ICC = 0.96), and step frequency (validity ICC = 0.95; reliability ICC = 0.96) during running. Peak acceleration impact variables showed a high reliability for the left (reliability ICC = 0.88) and right leg (reliability ICC = 0.85), and peak impact asymmetry showed a modest validity (ICC = 0.55). These results indicated that the AccTrea system is a valid and reliable way to assess spatio-temporal variables, and a reliable tool for measuring acceleration impacts during running.

The Influence of Playing Surface on the Loading Response to Soccer-Specific Activity

CONTEXT

The influence of playing surface on injury risk in soccer is contentious, and contemporary technologies permit an in vivo assessment of mechanical loading on the player.

OBJECTIVE

To quantify the influence of playing surface on the PlayerLoad elicited during soccer-specific activity.

DESIGN

Repeated measures, field-based design.

SETTING

Regulation soccer pitches.

PARTICIPANTS

Fifteen amateur soccer players (22.1 [2.4] y), injury free with ≥6 years competitive experience.

INTERVENTIONS

Each player completed randomized order trials of a soccer-specific field test on natural turf, astroturf, and third-generation artificial turf. GPS units were located at C7 and the mid-tibia of each leg to measure triaxial acceleration (100 Hz).

MAIN OUTCOME MEASURES

Total accumulated PlayerLoad in each movement plane was calculated for each trial. Ratings of perceived exertion and visual analog scales assessing lower-limb muscle soreness were measured as markers of fatigue.

RESULTS

Analysis of variance revealed no significant main effect for playing surface on total PlayerLoad (P = .55), distance covered (P = .75), or postexercise measures of ratings of perceived exertion (P = .98) and visual analog scales (P = .61). There was a significant main effect for GPS location (P < .001), with lower total loading elicited at C7 than mid-tibia (P < .001), but with no difference between limbs (P = .70). There was no unit placement × surface interaction (P = .98). There was also a significant main effect for GPS location on the relative planar contributions to loading (P < .001). Relative planar contributions to loading in the anterioposterior:mediolateral:vertical planes was 25:27:48 at C7 and 34:32:34 at mid-tibia.

CONCLUSIONS

PlayerLoad metrics suggest that playing surface does not influence mechanical loading during soccer-specific activity (not including tackling). Clinical reasoning should consider that PlayerLoad magnitude and axial contributions were sensitive to unit placement, highlighting opportunities in the objective monitoring of load during rehabilitation.

The Influence of Soccer Playing Surface on the Loading Response to Ankle (P)Rehabilitation Exercises

CONTEXT

Contemporary synthetic playing surfaces have been associated with an increased risk of ankle injury in the various types of football. Triaxial accelerometers facilitate in vivo assessment of planar mechanical loading on the player.

OBJECTIVE

To quantify the influence of playing surface on the PlayerLoad elicited during footwork and plyometric drills focused on the mechanism of ankle injury.

DESIGN

Repeated-measures, field-based design.

SETTING

Regulation soccer pitches.

PARTICIPANTS

A total of 15 amateur soccer players (22.1 [2.4] y), injury free with ≥6 years competitive experience.

INTERVENTIONS

Each player completed a test battery comprising 3 footwork drills (anterior, lateral, and diagonal) and 4 plyometric drills (anterior hop, inversion hop, eversion hop, and diagonal hop) on natural turf (NT), third-generation artificial turf (3G), and AstroTurf. Global positioning system sensors were located at C7 and the mid-tibia of each leg to measure triaxial acceleration (100 Hz).

MAIN OUTCOME MEASURES

PlayerLoad in each axial plane was calculated for each drill on each surface and at each global positioning system location.

RESULTS

Analysis of variance revealed a significant main effect for sensor location in all drills, with PlayerLoad higher at mid-tibia than at C7 in all movement planes. AstroTurf elicited significantly higher PlayerLoad in the mediolateral and anteroposterior planes, with typically no difference between NT and 3G. In isolated inversion and eversion hopping trials, the 3G surface also elicited lower PlayerLoad than NT.

CONCLUSIONS

PlayerLoad magnitude was sensitive to unit placement, advocating measurement with greater anatomical relevance when using microelectromechanical systems technology to monitor training or rehabilitation load. AstroTurf elicited higher PlayerLoad across all planes and drills and should be avoided for rehabilitative purposes, whereas 3G elicited a similar mechanical response to NT.

Influence of the structural components of artificial turf systems on impact attenuation in amateur football players

The purpose of this research was to evaluate the influence of the structural components of different 3rd generation artificial turf football field systems on the biomechanical response of impact attenuation in amateur football players. A total of 12 amateur football players (24.3 ± 3.7 years, 73.5 ± 5.5 kg, 178.3 ± 4.1 cm and 13.7 ± 4.3 years of sport experience) were evaluated on three third generation artificial turf systems (ATS) with different structural components. ATS were composed of asphalt sub-base and 45 mm of fibre height with (ATS1) and without (ATS2) elastic layer or compacted granular sub-base, 60 mm of fibre height without elastic layer (ATS3). Two triaxial accelerometers were firmly taped to the forehead and the distal end of the right tibia of each individual. The results reveal a higher force reduction on ATS3 in comparison to ATS1 (+6.24%, CI95%: 1.67 to 10.92, ES: 1.07; p < 0.05) and ATS2 (+21.08%, CI95%: 16.51 to 25.66, ES: 2.98; p < 0.05) elastic layer. Tibia acceleration rate was lower on ATS3 than ATS1 (-0.32, CI95%: -0.60 to -0.03, ES: 4.23; p < 0.05) and ATS2 (-0.35, CI95%: -0.64 to -0.06; ES: 4.69; p < 0.05) at 3.3 m/s. A very large correlation (r = 0.7 to 0.9; p < 0.05) was found between energy restitution and fibre height in both head and tibial peak acceleration and stride time. In conclusion, structural components (fibre height, infill, sub-base and elastic layer) determine the mechanical properties of artificial turf fields. A higher force reduction and lower energy restitution diminished the impact received by the player which could protect against injuries associated with impacts compared to harder artificial turf surfaces.

Playing football on artificial turf as a risk factor for fifth metatarsal stress fracture: a retrospective cohort study

OBJECTIVE

The fifth metatarsal stress fracture is a common injury among football players. Although several risk factors have been proposed, the association between the playing surface and development of fifth metatarsal stress fractures (MT-5) has not been evaluated. We conducted an epidemiological study using a computer-based survey to investigate the association between the playing surface and development of MT-5.

METHODS

This study included 1854 football players, of which 41 experienced MT-5 within the past 24 months. Baseline demographic data and the percentage of time spent playing on artificial turf and clay fields were compared between the non-MT-5 and MT-5 player groups, and the risks for development of MT-5 associated with the playing surfaces were estimated by univariate and multivariate analyses.

RESULTS

There were significant differences in body mass index, years of play, playing categories and playing time on artificial turf between non-MT-5 and MT-5 groups (p<0.05). Generalised estimating equations analyses adjusted for multiple confounders demonstrated that relative to the risk of playing <20% of the time on each surface, the OR (OR: 95% CI) for MT-5 for playing on artificial turf >80% of the time increased (3.44: 1.65 to 7.18), and for playing on a clay field 61%-80% of the time, the OR decreased (0.25: 0.11 to 0.59).

CONCLUSIONS

A higher percentage of playing time on an artificial turf was a risk factor for developing MT-5 in football players. This finding could be beneficial for creating strategies to prevent MT-5.

Neuromuscular responses and physiological patterns during a soccer simulation protocol. Artificial turf versus natural grass

BACKGROUND

Latest studies suggest similar performance of soccer players either on artificial turf (AT) or natural grass (NG). However, it is not clear if their muscular and physiological responses are also similar on both surfaces. This research aims to assess the influence of game surface on physiological patterns and neuromuscular responses of soccer players during a soccer simulation protocol (SSP) that incorporates repeated sprints and nonlinear actions at maximum speed.

METHODS

Sixteen amateur soccer players completed three bouts of the SSP on both AT and NG. The mechanical behaviour of both surfaces was recorded and the order was randomly established for each player. The physiological responses were measured during the SSP. A contra-movement jump and a tensiomyography analysis of the rectus femoris (RF) and biceps femoris (BF) were assessed right before and right after the SSP.

RESULTS

Both surfaces presented different mechanical properties. No differences among either surfaces or bouts were found for heart rate (HR) peak and HR mean (P>0.05). While the half-relaxation time of the RF on NG decreased after the SSP (right-leg: -44.430 ms; P=0.049; left-leg: -52.131 ms; P=0.008), the sustain time of the BF decreased after the SSP on AT (right-leg: +64.868 ms; P=0.007; left-leg: +87.564 ms; P<0.001). No differences between surfaces were found for the contra-movement jump.

CONCLUSIONS

The mechanical behaviour of both surfaces does not differ enough to cause different physiological and neuromuscular responses. Playing on AT should cause similar neuromuscular responses to NG.