Accuracy between optical and inertial motion capture systems for assessing trunk speed during preferred gait and transition periods

Estimating Compressive and Shear Forces at L5-S1: Exploring the Effects of Load Weight, Asymmetry, and Height Using Optical and Inertial Motion Capture Systems

This study assesses the agreement of compressive and shear force estimates at the L5-S1 joint using inertial motion capture (IMC) within a musculoskeletal simulation model during manual lifting tasks, compared against a top-down optical motion capture (OMC)-based model. Thirty-six participants completed lifting and lowering tasks while wearing a modified Plug-in Gait marker set for the OMC and a full-body IMC set-up consisting of 17 sensors. The study focused on tasks with variable load weights, lifting heights, and trunk rotation angles. It was found that the IMC system consistently underestimated the compressive forces by an average of 34% (975.16 N) and the shear forces by 30% (291.77 N) compared with the OMC system. A critical observation was the discrepancy in joint angle measurements, particularly in trunk flexion, where the IMC-based model underestimated the angles by 10.92-11.19 degrees on average, with the extremes reaching up to 28 degrees. This underestimation was more pronounced in tasks involving greater flexion, notably impacting the force estimates. Additionally, this study highlights significant differences in the distance from the spine to the box during these tasks. On average, the IMC system showed an 8 cm shorter distance on the X axis and a 12-13 cm shorter distance on the Z axis during lifting and lowering, respectively, indicating a consistent underestimation of the segment length compared with the OMC system. These discrepancies in the joint angles and distances suggest potential limitations of the IMC system's sensor placement and model scaling. The load weight emerged as the most significant factor affecting force estimates, particularly at lower lifting heights, which involved more pronounced flexion movements. This study concludes that while the IMC system offers utility in ergonomic assessments, sensor placement and anthropometric modeling accuracy enhancements are imperative for more reliable force and kinematic estimations in occupational settings.

Recurrent Neural Network Methods for Extracting Dynamic Balance Variables during Gait from a Single Inertial Measurement Unit

Monitoring dynamic balance during gait is critical for fall prevention in the elderly. The current study aimed to develop recurrent neural network models for extracting balance variables from a single inertial measurement unit (IMU) placed on the sacrum during walking. Thirteen healthy young and thirteen healthy older adults wore the IMU during walking and the ground truth of the inclination angles (IA) of the center of pressure to the center of mass vector and their rates of changes (RCIA) were measured simultaneously. The IA, RCIA, and IMU data were used to train four models (uni-LSTM, bi-LSTM, uni-GRU, and bi-GRU), with 10% of the data reserved to evaluate the model errors in terms of the root-mean-squared errors (RMSEs) and percentage relative RMSEs (rRMSEs). Independent t-tests were used for between-group comparisons. The sensitivity, specificity, and Pearson's r for the effect sizes between the model-predicted data and experimental ground truth were also obtained. The bi-GRU with the weighted MSE model was found to have the highest prediction accuracy, computational efficiency, and the best ability in identifying statistical between-group differences when compared with the ground truth, which would be the best choice for the prolonged real-life monitoring of gait balance for fall risk management in the elderly.

Motion Capture Technologies for Ergonomics: A Systematic Literature Review

Muscular skeletal disorder is a difficult challenge faced by the working population. Motion capture (MoCap) is used for recording the movement of people for clinical, ergonomic and rehabilitation solutions. However, knowledge barriers about these MoCap systems have made them difficult to use for many people. Despite this, no state-of-the-art literature review on MoCap systems for human clinical, rehabilitation and ergonomic analysis has been conducted. A medical diagnosis using AI applies machine learning algorithms and motion capture technologies to analyze patient data, enhancing diagnostic accuracy, enabling early disease detection and facilitating personalized treatment plans. It revolutionizes healthcare by harnessing the power of data-driven insights for improved patient outcomes and efficient clinical decision-making. The current review aimed to investigate: (i) the most used MoCap systems for clinical use, ergonomics and rehabilitation, (ii) their application and (iii) the target population. We used preferred reporting items for systematic reviews and meta-analysis guidelines for the review. Google Scholar, PubMed, Scopus and Web of Science were used to search for relevant published articles. The articles obtained were scrutinized by reading the abstracts and titles to determine their inclusion eligibility. Accordingly, articles with insufficient or irrelevant information were excluded from the screening. The search included studies published between 2013 and 2023 (including additional criteria). A total of 40 articles were eligible for review. The selected articles were further categorized in terms of the types of MoCap used, their application and the domain of the experiments. This review will serve as a guide for researchers and organizational management.

Biomechanics Analysis of the Firefighters' Thorax Movement on Personal Protective Equipment during Lifting Task Using Inertial Measurement Unit Motion Capture

Back injury is a common musculoskeletal injury reported among firefighters (FFs) due to their nature of work and personal protective equipment (PPE). The nature of the work associated with heavy lifting tasks increases FFs' risk of back injury. This study aimed to assess the biomechanics movement of FFs on personal protective equipment during a lifting task. A set of questionnaires was used to identify the prevalence of musculoskeletal pain experienced by FFs. Inertial measurement unit (IMU) motion capture was used in this study to record the body angle deviation and angular acceleration of FFs' thorax extension. The descriptive analysis was used to analyze the relationship between the FFs' age and body mass index with the FFs' thorax movement during the lifting task with PPE and without PPE. Sixty-three percent of FFs reported lower back pain during work, based on the musculoskeletal pain questionnaire. The biomechanics analysis of thorax angle deviation and angular acceleration has shown that using FFs PPE significantly causes restricted movement and limited mobility for the FFs. As regards human factors, the FFs' age influences the angle deviation while wearing PPE and FFs' BMI influences the angular acceleration without wearing PPE during the lifting activity.

Machine Learning Strategies for Low-Cost Insole-Based Prediction of Center of Gravity during Gait in Healthy Males

Whole-body center of gravity (CG) movements in relation to the center of pressure (COP) offer insights into the balance control strategies of the human body. Existing CG measurement methods using expensive measurement equipment fixed in a laboratory environment are not intended for continuous monitoring. The development of wireless sensing technology makes it possible to expand the measurement in daily life. The insole system is a wearable device that can evaluate human balance ability by measuring pressure distribution on the ground. In this study, a novel protocol (data preparation and model training) for estimating the 3-axis CG trajectory from vertical plantar pressures was proposed and its performance was evaluated. Input and target data were obtained through gait experiments conducted on 15 adult and 15 elderly males using a self-made insole prototype and optical motion capture system. One gait cycle was divided into four semantic phases. Features specified for each phase were extracted and the CG trajectory was predicted using a bi-directional long short-term memory (Bi-LSTM) network. The performance of the proposed CG prediction model was evaluated by a comparative study with four prediction models having no gait phase segmentation. The CG trajectory calculated with the optoelectronic system was used as a golden standard. The relative root mean square error of the proposed model on the 3-axis of anterior/posterior, medial/lateral, and proximal/distal showed the best prediction performance, with 2.12%, 12.97%, and 12.47%. Biomechanical analysis of two healthy male groups was conducted. A statistically significant difference between CG trajectories of the two groups was shown in the proposed model. Large CG sway of the medial/lateral axis trajectory and CG fall of the proximal/distal axis trajectory is shown in the old group. The protocol proposed in this study is a basic step to have gait analysis in daily life. It is expected to be utilized as a key element for clinical applications.

Sensors for Context-Aware Smart Healthcare: A Security Perspective

The advances in the miniaturisation of electronic devices and the deployment of cheaper and faster data networks have propelled environments augmented with contextual and real-time information, such as smart homes and smart cities. These context-aware environments have opened the door to numerous opportunities for providing added-value, accurate and personalised services to citizens. In particular, smart healthcare, regarded as the natural evolution of electronic health and mobile health, contributes to enhance medical services and people's welfare, while shortening waiting times and decreasing healthcare expenditure. However, the large number, variety and complexity of devices and systems involved in smart health systems involve a number of challenging considerations to be considered, particularly from security and privacy perspectives. To this aim, this article provides a thorough technical review on the deployment of secure smart health services, ranging from the very collection of sensors data (either related to the medical conditions of individuals or to their immediate context), the transmission of these data through wireless communication networks, to the final storage and analysis of such information in the appropriate health information systems. As a result, we provide practitioners with a comprehensive overview of the existing vulnerabilities and solutions in the technical side of smart healthcare.

Implementation of Kinetic and Kinematic Variables in Ergonomic Risk Assessment Using Motion Capture Simulation: A Review

Work-related musculoskeletal disorders (WMSDs) are among the most common disorders in any work sector and industry. Ergonomic risk assessment can reduce the risk of WMSDs. Motion capture that can provide accurate and real-time quantitative data has been widely used as a tool for ergonomic risk assessment. However, most ergonomic risk assessments that use motion capture still depend on the traditional ergonomic risk assessment method, focusing on qualitative data. Therefore, this article aims to provide a view on the ergonomic risk assessment and apply current motion capture technology to understand classical mechanics of physics that include velocity, acceleration, force, and momentum in ergonomic risk assessment. This review suggests that using motion capture technologies with kinetic and kinematic variables, such as velocity, acceleration, and force, can help avoid inconsistency and develop more reliable results in ergonomic risk assessment. Most studies related to the physical measurement conducted with motion capture prefer to use non-optical motion capture because it is a low-cost system and simple experimental setup. However, the present review reveals that optical motion capture can provide more accurate data.

Quantitative Evaluation of Gait Changes Using APDM Inertial Sensors After the External Lumbar Drain in Patients With Idiopathic Normal Pressure Hydrocephalus

Objectives: Gait and balance disturbances are common symptoms of idiopathic normal pressure hydrocephalus (iNPH). This study aimed to quantitatively evaluate gait and balance parameters after external lumbar drainage (ELD) using APDM inertial sensors.

Methods: Two-minute walkway tests were performed in 36 patients with suspected iNPH and 20 healthy controls. A total of 36 patients underwent ELD. According to clinical outcomes, 20 patients were defined as responders, and the other 16 as non-responders. The gait parameters were documented, and the corresponding differences between responders and non-responders were calculated.

Results: When compared with healthy controls, patients with suspected iNPH exhibited decreased cadence, reduced gait speed, a higher percentage of double support, decreased elevation at mid-swing, reduced foot strike angle, shorter stride length, difficulty in turning, and impaired balance functions. After the ELD, all these manifestations, except elevation at mid-swing and balance functions, were significantly improved in responders. The change of Z-score absolute value in the six parameters, except for foot strike angle, was >1. No significant improvement was observed in non-responders.

Conclusion: APDM inertial sensors are useful for the quantitative assessment of gait impairment in patients with iNPH, which may be a valuable tool for identifying candidates that are suitable for shunting operations.

Chen B. A Data-Driven Approach to Predict Fatigue in Exercise Based on Motion Data from Wearable Sensors or Force Plate

Fatigue increases the risk of injury during sports training and rehabilitation. Early detection of fatigue during exercises would help adapt the training in order to prevent over-training and injury. This study lays the foundation for a data-driven model to automatically predict the onset of fatigue and quantify consequent fatigue changes using a force plate (FP) or inertial measurement units (IMUs). The force plate and body-worn IMUs were used to capture movements associated with exercises (squats, high knee jacks, and corkscrew toe-touch) to estimate participant-specific fatigue levels in a continuous fashion using random forest (RF) regression and convolutional neural network (CNN) based regression models. Analysis of unseen data showed high correlation (up to 89%, 93%, and 94% for the squat, jack, and corkscrew exercises, respectively) between the predicted fatigue levels and self-reported fatigue levels. Predictions using force plate data achieved similar performance as those with IMU data; the best results in both cases were achieved with a convolutional neural network. The displacement of the center of pressure (COP) was found to be correlated with fatigue compared to other commonly used features of the force plate. Bland-Altman analysis also confirmed that the predicted fatigue levels were close to the true values. These results contribute to the field of human motion recognition by proposing a deep neural network model that can detect fairly small changes of motion data in a continuous process and quantify the movement. Based on the successful findings with three different exercises, the general nature of the methodology is potentially applicable to a variety of other forms of exercises, thereby contributing to the future adaptation of exercise programs and prevention of over-training and injury as a result of excessive fatigue.

Paddle Stroke Analysis for Kayakers Using Wearable Technologies

Proper stroke posture and rhythm are crucial for kayakers to achieve perfect performance and avoid the occurrence of sport injuries. The traditional video-based analysis method has numerous limitations (e.g., site and occlusion). In this study, we propose a systematic approach for evaluating the training performance of kayakers based on the multiple sensors fusion technology. Kayakers' motion information is collected by miniature inertial sensor nodes attached on the body. The extend Kalman filter (EKF) method is used for data fusion and updating human posture. After sensor calibration, the kayakers' actions are reconstructed by rigid-body model. The quantitative kinematic analysis is carried out based on joint angles. Machine learning algorithms are used for differentiating the stroke cycle into different phases, including entry, pull, exit and recovery. The experiment shows that our method can provide comprehensive motion evaluation information under real on-water scenario, and the phase identification of kayaker's motions is up to 98% validated by videography method. The proposed approach can provide quantitative information for coaches and athletes, which can be used to improve the training effects.

Kinematic Profile of Visually Impaired Football Players During Specific Sports Actions

Blind football, or Football 5-a-side, is a very popular sport amongst visually impaired individuals (VI) worldwide. However, little is known regarding the movement patterns these players perform in sports actions. Therefore, the aim of this study was to determine whether visually impaired players present changes in their movement patterns in specific functional tasks compared with sighted amateur football players. Six VI and eight sighted amateur football players performed two functional tasks: (1) 5 m shuttle test and (2) 60 s ball passing against a wall. The sighted players performed the tests while fully sighted (SIG) as well as blindfolded (BFO). During both tasks, full-body kinematics was recorded using an inertial motion capture system. The maximal center-of-mass speed and turning center-of-mass speed were computed during the 5 m shuttle test. Foot resultant speed, bilateral arm speed, and trunk flexion were measured during the 60 s ball passing test. The results showed that VI players achieved lower maximal and turning speed compared to SIG players (p < 0.05), but BFO were slower than the VI players. The VI players presented similar foot contact speed during passes when compared to SIG, but they presented greater arm movement speed (p < 0.05) compared to both SIG and BFO. In addition, VI players presented greater trunk flexion angles while passing when compared to both SIG and BFO (p < 0.05). It is concluded that VI players present slower speed while running and turning, and they adopt specific adaptations from arm movements and trunk flexion to perform passes.

Quaternion-Based Local Frame Alignment between an Inertial Measurement Unit and a Motion Capture System

Local frame alignment between an inertial measurement unit (IMU) system and an optical motion capture system (MCS) is necessary to combine the two systems for motion analysis and to validate the accuracy of IMU-based motion data by using references obtained through the MCS. In this study, we propose a new quaternion-based local frame alignment method where equations of angular velocity transformation are used to determine the frame alignment orientation in the form of quaternion. The performance of the proposed method was compared with those of three other methods by using data with different angular velocities, noises, and alignment orientations. Furthermore, the effects of the following three factors on the estimation performance were investigated for the first time: (i) transformation concept, i.e., angular velocity transformation vs. angle transformation; (ii) orientation representations, i.e., quaternion vs. direction cosine matrix (DCM); and (iii) applied solvers, i.e., nonlinear least squares method vs. least squares method through pseudoinverse. Within our limited test data, we obtained the following results: (i) the methods using angular velocity transformation were better than the method using angle transformation; (ii) the quaternion is more suitable than the DCM; and (iii) the applied solvers were not critical in general. The proposed method performed the best among the four methods. We surmise that the fewer number of components and constraints of the quaternion in the proposed method compared to the number of components and constraints of the DCM-based methods may result in better accuracy. Owing to the high accuracy and easy setup, the proposed method can be effectively used for local frame alignment between an IMU and a motion capture system.