Malachite green adsorption from aqueous solutions onto biochar derived from sheep manure: adsorption kinetics, isotherm, thermodynamic, and mechanism

Monte Carlo, molecular dynamic, and experimental studies of the removal of malachite green using g-C3N4/ZnO/Chitosan nanocomposite in the presence of a deep eutectic solvent

Deep-eutectic solvents (DES) have emerged as promising candidates for preparing nanocomposites. In this study, a DES-based graphitic carbon nitride (g-C3N4)/ZnO/Chitosan (Ch) nanocomposite was synthesized to remove malachite green (MG) dye from water. The DES was prepared by mixing and heating citric acid as a hydrogen bond acceptor and lactic acid as a hydrogen bond donor. This is the first report of the removal of MG using DES-based nanocomposites. Experiments on kinetics and isothermal adsorption were conducted to systematically explore the adsorption performances of nanocomposite toward dye. At 25 °C, the highest adsorption performance was obtained with alkaline media (>90 % removal). The greatest adsorption capacity (qm) was 59.52 mg g-1 at conditions (30 mg L-1 MG solution, pH 9, 3 mg nanocomposite per 10 mL of MG solution, 25 °C, 150 rpm, and 150 min) based on the calculation from the best-fitting isotherm model (Langmuir). The adsorption process was most appropriately kinetically described by the PSO model. The Monte Carlo (MC) and molecular dynamic (MC) results are correlated with experimental findings to validate the theoretical predictions and enhance the overall understanding of the adsorption process. Electronic structure calculations reveal the nature of interactions, including hydrogen bonding and electrostatic forces, between the nanocomposite and MG molecules.

Artificial neural network modelling and experimental investigations of malachite green adsorption on novel carboxymethyl cellulose/β-cyclodextrin/nickel cobaltite composite

This study presents a novel polymer nanocomposite based on carboxymethyl cellulose and β-cyclodextrin crosslinked with succinic acid (CMC-SA-β-CD) containing nickel cobaltite (NCO) nano-reinforcement. Various analytical techniques have been employed to investigate the structural, thermal, and morphological features of the resulting nanocomposite. The CMC-SA-β-CD/NCO nanocomposite has been utilized as an adsorbent for the removal of bisphenol-A (BPA, R% <40 %), malachite green (MG, R% > 75 %)), and Congo red (CR, no adsorption) from the synthetic wastewater. The study systematically explored the impact of various parameters on the adsorption process, and the interactions between MG and CMC-SA-β-CD/NCO were discussed. The adsorption data were fitted to different models to elucidate the kinetics and thermodynamics of the adsorption process. An artificial neural network (ANN) analysis was employed to train the experimental dataset for predicting adsorption outcomes. Despite a low BET surface area (0.798 m2 g-1), CMC-SA-β-CD/NCO was found to exhibit high MG adsorption capacity. CMC-SA-β-CD/NCO exhibited better MG adsorption performance at pH 5.5, 40 mg L-1 MG dye concentration, 170 min equilibrium time, 20 mg CMC-SA-β-CD/NCO dose with more than 90 % removal efficiency. Moreover, the thermodynamic studies suggest that the adsorption of MG was exothermic with ΔH° value -9.93 ± 0.76 kJ mol-1. The isotherm studies revealed that the Langmuir model was the best model to describe the adsorption of MG on CMC-SA-β-CD/NCO indicating monolayer surface coverage with Langmuir adsorption capacity of 182 ± 4 mg g-1. The energy of adsorption (11.4 ± 0.8 kJ mol-1) indicated chemisorption of MG on the composite surface. The kinetics studies revealed that the pseudo-first-order model best described the adsorption kinetics with q e  = 86.7 ± 2.9 mg g-1. A good removal efficiency (>70 %) was retained after five regeneration reuse cycles. The ANN-trained data showed good linearity between predicted and actual data for the adsorption capacity (R-value>0.99), indicating the reliability of the prediction model. The developed nanocomposite, composed predominantly of biodegradable material, is facile to synthesize and exhibited excellent monolayer adsorption of MG providing a new sustainable adsorbent for selective MG removal.

Malachite green (cationic dye) removal with modified Pinus brutia biochar

Dyes are frequently used in industries such as textile, leather, paper and printing, to water sources causes harmful effects on the environment and human health. Therefore, it is crucial to effectively remove colored contaminants from water in order to protect the environment and public health, maintain biodiversity and preserve the esthetic aspects of water resources. In this study, wood chips obtained from Pinus brutia (PB) tree grown in many parts of the world were turned into biochar and then modified and used for the removal of malachite green, a cationic dye. For this purpose, biochar (PBB) was made by collecting PB wood and turning it into chips (PB). Later, PBB was modified to gain nano-magnetic properties. The structure of the obtained PBB and nM-PBB adsorbents was characterized by FT-IR. pH (2-9), temperature (25 °C-55 °C), time change (15 min-240 min), adsorbent amount change (0.05 g-0.45g) and MG concentration (25 mg/L-250 mg/L) were investigated in MG removal of PBB and nM-PBB. The process was found to be pseudo-second-order and spontaneous endothermic reaction. PBB and nM-PBB were found to be suitable for Langmuir isotherm in MG removal (qmax=13.004 mg/g for PBB, qmax=18.215 mg/g for nM-PBB).

Potential use of dry powder of Vossia cuspidata (Roxb.) Griff. rhizomes and leaves in methylene blue dye remediation

Phytoremediation is a promising, cost-effective, and eco-friendly process for wastewater treatment. Herein, the dry biomasses of Vossia cuspidata (Roxb.) Griff. leaves (PL) and rhizomes including aerial stems (PR) were used to effectively remediate methylene blue (MB) dyes. Interestingly, the adsorption uptake and removal efficiency of MB by PR were higher than those of PL; exceeding 97 and 91% in 35 and 25 min for 0.1 and 0.4 g/L MB, respectively. The MB diffusion within the PL and PR was insignificant and the adsorption kinetics was principally controlled by the surface MB-adsorbent interaction, as consistently approved by the pseudo-second order kinetic model. In addition, the adsorption increased rapidly with the plant dosage with high dependence on the initial MB concentration. Moreover, the impact of shaking speed on the adsorption was minor but temperature played a critical role where the highest efficiencies were recorded at 30 and 40 °C on PL (91.9%) and PR (93.3%), respectively. The best removal efficiencies were attained with PR at pH 6, but with PL at pH 8. The Temkin isotherm could perfectly simulate the experimental data (R2 > 0.97); suggesting a linear decrease of the adsorption heat of MB with the plant coverage.

Characterization and adsorption of malachite green dye from aqueous solution onto Salix alba L. (Willow tree) leaves powder and its respective biochar

In the present study, the use of low-cost, highly efficient, eco-friendly, and abundantly available (in Kashmir region, J&K India) willow leaves from which adsorbents like willow leaves powder (WLP) and willow leaves biochar (WLB) were prepared, have been found to be efficient for malachite green (MG) dye removal and can be used as an alternative to the current expensive methods of removing the same dye from an aqueous solution. The techniques like Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), and carbon, hydrogen, nitrogen, sulphur (CHNS) analyser were used to characterize the samples without any chemical treatment. SEM of the adsorbents shows the presence of different sized pores, cracks, and crevices. FTIR and CHNS show functional groups and elemental concentration, respectively. The effects of various experimental parameters such as contact time, adsorbent dosage, initial dye concentration, salt treatment, and pH were investigated and optimal experimental conditions were obtained. It has been found that Langmuir, Freundlich, and Temkin isotherms were useful for describing the equilibrium of adsorption system. The equilibrium adsorption data in this research work was found to follow both Langmuir and Freundlich isotherm models and maximum monolayer capacity of WLP and WLB were found to be 10.014 and 21.244 mg/g, respectively. The experimental data for both WLP and WLB followed pseudo-second-order kinetic model with R²= 0.999. Intraparticle diffusion model reveals that more than one mechanism influenced the adsorption process. Thermodynamic study concluded that the adsorption is spontaneous for both adsorbents but exothermic for WLP and is endothermic in nature for WLB. Present exploration and comparison with other reported adsorbents concluded that, WLP and WLB may be useful as low-cost attractive option for the removal of MG dye from aqueous solution and therefore, also from wastewater containing MG dye.