Reverse dosimetry modeling of toluene exposure concentrations based on biomonitoring levels from the Canadian health measures survey

Physiologically-based toxicokinetic model for the prediction of perchlorate distribution and its application

Perchlorate is a stable and readily transportable thyroid hormone disruptor, and prevalent exposure to perchlorate through food and drinking water has raised public concern about its health effects. The physiologically based toxicokinetic (PBTK) model as a dose prediction method is effective to predict the toxicant exposure dose of an organism and helps quantitatively assess the dose-dependent relationship with toxic effects. The current study aimed to establish a multi-compartment PBTK model based on updated time-course datasets of single oral exposure to perchlorate in rats. With adjustment of the kinetic parameters, the model fitted well the toxicokinetic characteristics of perchlorate in urine, blood, and thyroid from our experiments and the literature, and the coefficient of determination (R²) between the fitting values and the experimental data in regression analysis was greater than 0.91, indicating the robustness of the current model. The results of sensitivity analysis and daily repeated exposure simulations together confirmed its effective renal clearance. According to the distribution characteristic of perchlorate, a correlation study of internal and external exposure was conducted using urinary perchlorate as a bioassay indicator. The developed multi-compartment model for perchlorate updates important toxicokinetic data and kinetic parameters, providing analytical and modeling tools for deriving total exposure levels in the short term.

Cardiopulmonary parameters and organ blood flows for workers expressed in terms of VO2 for use in physiologically based toxicokinetic modeling

Minute ventilation rates (VE), alveolar ventilation rates (VA), cardiac outputs (Q), liver blood flow (LBF) and kidneys blood flows (KBF) for physiologically based toxicokinetic modeling and occupational health risk assessment in active workers have apparently not been determined. Minute energy expenditure rates (E) and oxygen consumption rates (VO₂) in workers during exertions and their aggregate daytime activities are obtained by using open-circuit wearable devices for indirect calorimetry measurements and the doubly labeled water method respectively. Hundreds of E (in kcal/min) and VO₂ (in L of O₂/min) were previously reported for workers. The oxygen uptake factors of 0.2059 ± 0.0019 and 0.2057 ± 0.0018 L of O₂/kcal during postprandial and fasting phases respectively enabled conversion of E into VO₂. Equations determined in this study based upon more than 25 000 published measurements enable the calculation of 15 parameters in the same worker only by using the VO₂ reflecting workload. These parameters, notably VE, VA, VE/VO₂ VA/Q, Q, LBF and KBF were found to be interrelated. Altering one of these changes the order of magnitude of the others. Q, LBF and KBF decrease when supine adults at rest switch to an upright position. This effect of gravity diminished when VO₂ increased. The fall in LBF and KBF during exertion might enhance muscle blood flow as reported previously. Taken together these equations and data may improve the accuracy of physiologically based toxicokinetic modeling as well as occupational health assessment studies in active workers exposed to xenobiotics.List of main abbreviations: AVOD: arterioveinous oxygen content difference.BMI: body mass index (in kg/m²).BSA: body surface area (in m²).BTPS: body temperature and saturated with water vapor.Bw: body weight (in kg).E: minute energy expenditure rate (in kcal/min).F_GE: organ blood flow factor for the gravitational effect on blood circulation.H: oxygen uptake factor, volume of oxygen (at STPD) consumed to produce 1 kcal of energy expended.KBF: kidneys blood flow (in ml/min).LBF: liver blood flow (in ml/min).P_BF: liver or kidneys blood flows expressed in terms of percentages (in %) of Q_{sup C} values: namely P_BF = (LBF or KBF/Q_{sup C}) x 100.Q: cardiac output (in L/min or ml/min).Q_{sup C:} cardiac output for the cohort of males or females in supination (in ml/min).STPD: standard temperature and pressure, dry air.sup: values measured when adults are in the supine position.up: values measured when adults are in the upright position.VDphys: physiological dead space at BTPS (in L).VT: tidal volume at BTPS (in L).VA: alveolar ventilation rate at BTPS (in L/min).VA/Q: ventilation-perfusion ratio (unitless).VE: minute ventilation rate at BTPS (in L/min).VO₂: oxygen consumption rate (i.e. the oxygen uptake) at STPD (in L/min).VQ: ventilatory equivalent for VO₂ (VE at BTPS /VO₂ at STPD).

Estimation of toluene exposure in air from BMA (S-benzylmercapturic acid) urinary measures using a reverse dosimetry approach based on physiologically pharmacokinetic modeling

This study aimed to use a reverse dosimetry PBPK modeling approach to estimate toluene atmospheric exposure from urinary measurements of S-benzylmercapturic acid (BMA) in a small group of individuals and to evaluate the uncertainty associated to urinary spot-sampling compared to 24-h collected urine samples. Each exposure assessment technique was developed namely to estimate toluene air exposure from BMA measurements in 24-h urine samples (24-h-BMA) and from distributions of daily urinary BMA spot measurements (DUBSM). Model physiological parameters were described based upon age, weight, size and sex. Monte Carlo simulations with the PBPK model allowed converting DUBSM distribution (and 24-h-BMA) into toluene air levels. For the approach relying on DUBSM distribution, the ratio between the 95% probability of predicted toluene concentration and its 50% probability in each individual varied between 1.2 and 1.4, while that based on 24-h-BMA varied between 1.0 and 1.1. This suggests more variability in estimated exposure from spot measurements. Thus, estimating toluene exposure based on DUBSM distribution generated about 20% more uncertainty. Toluene levels estimated (0.0078-0.0138 ppm) are well below Health Canada's maximum chronic air guidelines. PBPK modeling and reverse dosimetry may be combined to interpret urinary metabolites data of VOCs and assess related uncertainties.

Integration of biomonitoring data and reverse dosimetry modeling to assess population risks of arsenic-induced chronic kidney disease and urinary cancer

Chronic exposure to inorganic arsenic (iAs) is associated with chronic kidney disease (CKD) and urinary cancer, but the risks are poorly understood. Human biomonitoring can serve as a tool to better quantify human exposure and to conduct risk assessment. We aimed to assess the population risks of CKD and urinary cancer due to iAs intake based on the blood arsenic concentrations of 601 participants in Taiwan. A physiologically based pharmacokinetic modeling-based reverse dosimetry was conducted to estimate the daily intakes of iAs (DI_iAs). We performed the benchmark dose (BMD) modeling for CKD using participants' estimated glomerular filtration rate (eGFR) and the estimated DIiAs to derive a point of departure (POD). Margin of exposure (MOE) was used to characterize the risks. The population with eGFR values of <60 mL/min/1.73 m² had significantly higher DI_iAs (median: 3.20 μg/kg/day, 2.5th-97.5th percentiles: 2.35-4.67 μg/kg/day) than those with normal renal function (1.99, 1.22-3.42 μg/kg/day). The POD for CKD was 1.557 μg/kg/day, which could serve as a possible reference value for CKD risk assessment. The MOEs indicated that the CKD risk due to iAs intake may potentially be a cause for high concern for the population with reduced renal function. The iAs-induced urinary cancer risk may be a cause for moderate-to-high concern.

An overview of the current progress, challenges, and prospects of human biomonitoring and exposome studies

Human Biomonitoring (HB), the process for determining whether and to what extent chemical substances penetrated our bodies, serves as a useful tool to quantify human exposure to pollutants. In cases of nutrition and physiologic status, HB plays a critical role in the identification of excess or deficiency of essential nutrients. In pollutant HB studies, levels of substances measured in body fluids (blood, urine, and breast milk) or tissues (hair, nails or teeth) aid in the identification of potential health risks or associated adverse effects. However, even as a widespread practice in several countries, most HB studies reflect exposure to a single compound or mixtures which are measured at a single time point in lifecycle. On the other hand, throughout an individual's lifespan, the contact with different physical, chemical, and social stressors occurs at varying intensities, differing times and durations. Further, the interaction between stressors and body receptors leads to dynamic responses of the entire biological system including proteome, metabolome, transcriptome, and adductome. Bearing this in mind, a relatively new vision in exposure science, defined as the exposome, is postulated to expand the traditional practice of measuring a single exposure to one or few chemicals at one-time point to an approach that addresses measures of exposure to multiple stressors throughout the lifespan. With the exposome concept, the science of exposure advances to an Environment-Wide Association Perspective, which might exhibit a stronger relationship with good health or disease conditions for an individual (phenotype). Thus, this critical review focused on the current progress of HB and exposome investigations, anticipating some challenges, strategies, and future needs to be taken into account for designing future surveys.

Perspectives on trace chemical safety and chemophobia: risk communication and risk management

Safety issues regarding consumer products contaminated with trace amounts of chemicals are of great concern to consumers, with the degree of concern occasionally escalating to the psychological syndrome, chemophobia (i.e., the fear of chemicals). Hazardous substances frequently implicated in safety concerns include heavy metals (arsenic, mercury, cadmium, and lead), volatile organic compounds (VOC) such as benzene and o-toluidine, pesticides, carcinogens, radioactive substances, and endocrine disrupting chemicals (EDC) such as bisphenol A and phthalates. To improve communication of risk to society, members of academia, government, consumer organizations, and industry participated in this workshop to discuss and exchange perspectives on trace chemical safety. From the perspective of academia, integrated risk assessments need to be implemented to encompass various exposure sources and routes. The identification and investigation of new exposure-related biomarkers are also recommended to verify direct causal relationships between specific chemical exposure and effects on human health. As for regulation, governments need to establish and maintain acceptable limits for trace chemicals in products. In addition, harmonized efforts need to be undertaken among government agencies to share regulatory limits and effectively control trace chemicals in consumer products. Manufacturers need to faithfully abide by Good Manufacturing Practice (GMP) guidelines, monitor sources of contamination, and minimize these for consumer safety. To effectively resolve safety issues arising from trace chemicals exposure, collaborative efforts are needed involving academia, government, consumer organizations, and industry. Further, scientific evidence-based risk assessment is a critical approach to effectively manage trace chemical safety issues.