A simple method for detecting breakthroughs in used chemical cartridges

Adsorption Performance of Activated-Carbon-Loaded Nonwoven Filters Used in Filtering Facepiece Respirators

Filtering nonwovens loaded with activated carbon are among the most popular materials used in the construction of filtering facepiece respirators (FFRs) with anti-odour properties that can be used for respiratory protection at workplaces where the occupational exposure limits of harmful substances are not exceeded. Such FFRs, in addition to a polymer filter material of varying effectiveness, also contain a layer of activated-carbon-loaded nonwoven filter, which limits the quantity of chemical compounds entering the breathing zone. The aim of this work was to analyse the influence of challenge concentration (20-120 ppm), relative humidity (2-70%), flow rate (20-55 L/min), and flow pattern (steady-state and pulsating) on the breakthrough of polymer/carbon nonwovens. A commercial activated-carbon-loaded nonwoven filter was used in this study. Its morphology and textural parameters were determined using optical microscopy, image processing, and nitrogen adsorption/desorption measurements at 77 K. Breakthrough experiments were carried out using cyclohexane vapours to assess adsorption characteristics of polymer/carbon media. The results showed that the breakthrough times decreased with increasing challenge concentration (up to 30%), relative humidity (up to 73%), and flow rate (up to 72%). The pulsating flow pattern was found to be more favourable in terms of odour reduction efficiency (up to 30%). The results indicate that all of these factors should be considered during selection and performance assessment of respirators used for odour relief.

Lack of Relationship between Occupational Exposure to Carbon Disulfide and Endocrine Dysfunction: A Six‐year Cohort Study of the Japanese Rayon Workers

OBJECTIVES

A six-year prospective cohort study was conducted to clarify whether the current carbon disulfide (CS2) exposure level is low enough to prevent subclinical health impairment and/or to ameliorate health effects due to previous high exposure. This paper describes the follow-up results, exposure assessment, and effects on the endocrine system.

METHODS

The study subjects were 432 male workers exposed to CS2 at one of the 11 rayon factories in Japan and 402 referent workers from the same factories, all of whom were examined in 1992-93. 251 CS2-exposed, 140 former-exposed and 359 referent workers participated in the follow-up survey (follow-up rate 89.9%) in 1998-99. Urinary 2-thiothiazolidine-4-carboxylic acid (TTCA) at the end of a shift as internal exposure index and the time-weighted average CS2 concentration as external exposure index were measured twice a year from 1992-1993. By using various blood indices, we evaluated effects on thyroid, hypophysis, and gonad function, as well as effects on glucose metabolism. Information on potential confounding factors, such as age, smoking and alcohol drinking, were collected and adjusted for.

RESULTS

When the individual exposure level was represented by arithmetic mean for TTCA and CS2 concentration, geometric means (SD) of CS2 workers were 1.61 (1.91) mg/g.crea and 5.02 (1.84) ppm, respectively. There were no exposure-related differences in glucose metabolism or any of the endocrinological indices.

CONCLUSIONS

No biologically significant effects of CS2 were found on endocrine function in Japanese rayon manufacturing workers when the average internal and external exposure levels were maintained below the current occupational exposure limit.