Skin Penetration by Metal Compounds with Special Reference to Copper

Metal(loid) speciation in dermal bioaccessibility extracts from contaminated soils and permeation through synthetic skin

Dermal exposure to metal(loid)s from contaminated soils can contribute to health risk. Metal(loid) speciation will influence their bioaccessibility in sweat and subsequent permeation across the skin. Therefore, the speciation of the bioaccessible fraction of metal(loid)s in two synthetic sweat formulations (sweat A (pH 6.5) and B (pH 4.7)) was assessed using chemical equilibrium modelling (Visual MINTEQ). Permeation through synthetic skin and the influence of sebum in the permeation of As, Cr, Cu, Ni, Pb, and Zn were also investigated using Franz cells. Following dermal bioaccessibility tests for five Chromated Copper Arsenate (CCA)-contaminated soils and one certified soil (SQC001), mean metal(loid) bioaccessibility (%) was higher in sweat B (2.33-18.8) compared to sweat A (0.12-7.53). Arsenic was almost entirely found as As(V) in both sweats. In sweat A, comparable concentrations of Cr(III) and Cr(VI) were found whereas in sweat B, Cr was primarily present as Cr(III). Copper was primarily found as Cu2+. Bioaccessible Cr extracted from nearly all soils permeated through the Strat-M membrane when it was coated with sebum. The Cr permeation coefficient (Kp) ranged between 0.004 and 0.13 cm/h and the Kp for Cu was higher (0.024-0.52 cm/h). As, Ni, Pb, and Zn did not permeate the synthetic skin.

Influence of sebum proportion in synthetic sweat on dermal bioaccessibility and on permeation of metal(loid)s from contaminated soils

Even if dermal exposure to metal(loid)s from contaminated soils has received less attention than oral and inhalation exposure, the human health risk can be significant for some contaminants and exposure scenarios. The purpose of this study was to assess the influence of sebum proportion (1% v/v and 3% v/v) in two synthetic sweat formulations (EN 1811, pH 6.5 (sweat A) and NIHS 96-10, pH 4.7 (sweat B)) on As, Cr, Cu, Ni, Pb, and Zn dermal bioaccessibility and on subsequent diffusion through synthetic skin. A Franz cell with a Strat-M® membrane was used to quantify permeation parameters of bioaccessible metal(loid)s. Sebum's presence in synthetic sweat formulations significantly modified bioaccessibility percentages for As, Cr, and Cu. However, sebum proportion in both sweats did not influence the bioaccessibility of Pb and Zn. Some metal(loid)s, namely As and Cu, permeated the synthetic skin membrane during permeation tests when sebum was added to sweat while no permeation was observed without sebum in sweat formulations. Depending on sweat formulation, the addition of sebum (1% v/v) increased or decreased the Cr permeation coefficients (Kp). In all cases, bioaccessible Cr was no longer permeable when extracted with 3% sebum. Ni transdermal permeation was not influenced by the presence of sebum, and no permeation was observed for Pb and Zn. Further studies on the speciation of metal(loid)s in bioaccessible extracts in the presence of sebum are recommended.

Skin and respiratory exposure to soluble lead, cobalt, nickel, copper, arsenic and silver at two South African precious metals refineries

OBJECTIVES

Precious metals refinery workers are exposed to soluble platinum group metals (PGMs) during PGM-refining but may also be exposed to hazardous non-PGMs (Pb, Co, Ni, Cu, As and Ag) still present in the matte following base metals refining. The aim of this article was to report the skin and respiratory exposure of workers to soluble non-PGMs during PGM-refining.

METHODS

Skin and respiratory exposure (of 40 workers at two precious metals refineries) were measured simultaneously over two consecutive shifts. Skin exposure was measured on the palm, wrist, neck and forehead using Ghostwipes™ and respiratory exposure was measured using the MDHS method 46/2 during which soluble metals were extracted using 0.07 M HCl and mechanical agitation, followed by ICP-MS analysis.

RESULTS

The geometric means (GM) of average skin exposure to individual soluble metals on all anatomical areas was found in the order Cu (0.018 µg/cm²) > Ni (0.016 µg/cm²) > Pb (0.008 µg/cm²) > Ag (0.006 µg/cm²) > As (0.004 µg/cm²) > Co (0.0008 µg/cm²) with the palm being the highest exposed anatomical area. The order of the GM respiratory exposure was Pb (0.224 µg/m³) > Ag (0.201 µg/m³) > Cu (0.159 µg/m³) > As (0.079 µg/m³) > Ni (0.034 µg/m³) > Co (0.016 µg/m³) with exposure to As exceeding the South African occupational exposure limit (20 µg/m³) during concentrate handling (max 66.174 µg/m³).

CONCLUSIONS

Workers were exposed to a mixture of toxic PGM and non-PGMs via the skin and inhalation. Exposure to these metals could lead to the development of diseases, such as contact dermatitis, occupational allergy, or occupational cancer. Non-PGMs must be included in hazardous chemical risk assessments and control strategies implemented at precious metals refineries.

Rapid Review of Dermal Penetration and Absorption of Inorganic Lead Compounds for Occupational Risk Assessment

Lead (Pb) exposure continues to be a significant public health issue in both occupational and non-occupational settings. The vast majority of exposure and toxicological studies have focused on effects related to inhalation and gastrointestinal exposure routes. Exposure to inorganic Pb compounds through dermal absorption has been less well studied, perhaps due to the assumption that the dermal pathway is a minor contributor to aggregate exposures to Pb compounds. The aim of this rapid review was to identify and evaluate published literature on dermal exposures to support the estimation of key percutaneous absorption parameters (Kp, flux, diffusion rate) for use in occupational risk assessment. Eleven articles were identified containing information from both in vitro and in vivo systems relevant to percutaneous absorption kinetics. These articles provided 24 individual study summaries and information for seven inorganic Pb compounds. The vast majority of study summaries evaluated (n = 22, 92%) reported detectable amounts of dermal absorption of inorganic Pb. Data were identified for four Pb compounds (Pb acetate, Pb nitrate, Pb oxide, and Pb metal) that may be sufficient to use in evaluating physiologically based pharmacokinetic models. Average calculated diffusion rates for the pool of animal and human skin data ranged from 10-7 to 10-4 mg cm-2 h-1, and Kp values ranged from 10-7 to 10-5 cm h-1. Study design and documentation were highly variable, and only one of the studies identified was conducted using standard test guideline-compliant methodologies. Two studies provided quality estimates on the impacts of dermal absorption from water-insoluble Pb compounds on blood Pb levels. These two studies reported that exposures via dermal routes could elevate blood Pb by over 6 µg dl-1. This estimation could represent over 100% of 5 µg dl-1, the blood Pb associated with adverse health effects in adults. The utility of these estimates to occupational dermal exposures is limited, because the confidence in the estimates is not high. The literature, while of limited quality, overall strongly suggests inorganic Pb has the potential for dermal uptake in meaningful amounts associated with negative health outcomes based on upper bound diffusion rate estimates. Future standard test guideline-compliant studies are needed to provide high-confidence estimates of dermal uptake. Such data are needed to allow for improved evaluation of Pb exposures in an occupational risk assessment context.

Fluorescent biogenic Schiff base compounds of dimethyltin

Fluorescent biogenic Schiff base compounds of dimethyltin featuring distinct coordination sphere in solid and solution phase.