Poloxamers for Surface Modification of Hydrophobic Drug Carriers and Their Effects on Drug Delivery

Cellulose- and Saccharide-Based Orally Dispersible Thin Films Transform the Solid States and Dissolution Characteristics of Poorly Soluble Curcumin

This study aimed at developing and optimizing the orally dispersible thin film (ODTF) containing a plant-derived drug-curcumin (CUR). CUR belongs to a biopharmaceutical classification system (BCS) class IV compound that requires improving its water solubility and tissue permeability preceding formulation. An ODTF was applied to produce a solid dispersion matrix for CUR to resolve such solubility and permeability problems. The film-forming polymers used in the study were cellulose-based (hydroxypropyl methylcellulose/HPMC and carboxymethylcellulose/CMC) and saccharide-based maltodextrin (MDX). Poloxamer (POL) was also employed as surfactant and solubilizer. The solvent casting technique was applied to produce the films. The ethanolic solution of CUR was mixed with an aqueous solution of POLs and then incorporated into different film-forming polymers prior to casting. The processing of the CUR with POL solution was intended to aid in the even dispersion of the drug in the polymeric matrices and enhance the wettability of the films. The physical state and properties of the films were characterized in terms of their morphology, crystallinity of the drug, and phase miscibility of the mixtures. The dissolution profile of the films was also evaluated in terms of dissolution rate and dissolution efficiency. The obtained ODTF products were smooth and flat-surfaced. Physical characterization also indicated that the CUR was homogeneously dispersed in the ODTFs and no longer existed as crystalline material as revealed by X-ray diffraction (XRD). The CUR was also not phase-separated from the films as disclosed by differential scanning calorimetry (DSC). Such dispersion was achieved through the solubilizing effect of POLs and compact polymeric film matrices that prevented the CUR from recrystallization. Furthermore, the ODTFs also improved the dissolution of CUR by 3.2-fold higher than the raw CUR. Overall, cellulose-based films had favorable physical properties compared with saccharide-based films.

Construction and evaluation of a nanosystem that combines acidification promoted chemodynamic therapy and intracellular drug release monitoring

Triple-negative breast cancer (TNBC) is a highly invasive subtype of breast cancer that seriously affects women's physical and mental health. Chemodynamic therapy (CDT) induces cell death by specifically generating Fenton/Fenton-like reactions within tumor cells. However, the weak acidity of the tumor microenvironment (TME) greatly weakens the effectiveness of CDT. This work constructed a kind of P-CAIDF/PT nanoparticles (NPs), composed of two Pluronic F127 (PF127) based polymers: one was PF127-CAI (P-CAI), composed by connecting PF127 with the carbonic anhydrase IX (CA IX) inhibitor (CAI); the other was PF127-SS-TPE (PT), composed of PF127 and the aggregation-induced emission molecule, tetraphenylethylene (TPE), via the linkage of disulfide bonds. The two polymers were employed to construct the doxorubicin (DOX) and ferrocene (Fc) co-loaded P-CAIDF/PT NPs through the film dispersion method. After being administrated via i.v., P-CAIDF/PT could be accumulated in the TME by the enhanced permeability and retention (EPR) effect and engulfed by tumor cells. P-CAI induced intracellular acidification by inhibiting the overexpressed CA IX, thus promoting CDT by enhancing the Fc-mediated Fenton reaction. The acidification-enhanced CDT combined with the DOX-mediated chemotherapy could improve the therapeutic effect on TNBC. Moreover, P-CAIDF/PT also monitored the intracellular drug release processes through the fluorescence resonance energy transfer (FRET) effect depending on the inherent DOX/TPE pair. In conclusion, the P-CAIDF/PT nanosystem can achieve the combination therapy of acidification-enhanced CDT and chemotherapy as well as therapy monitoring, thus providing new ideas for the design and development of TNBC therapeutic agents.

Fabrication and characterization of nanoparticles with lecithin liposomes and poloxamer micelles: Impact of conformational structures of poloxamers

In this study, we fabricated and characterized nanoparticles with a core/shell structure using lecithin and poloxamer. We also evaluated their ability to load proteins. At a lecithin/poloxamer ratio of 0.2, the sizes of lecithin/P188 (low molecular weight poloxamer) and lecithin/P338 (high molecular weight poloxamer) nanoparticles were 316.1 and 280.7 nm, respectively. Lecithin/P188 nanoparticles easily lost core/shell structure at pH 3 and 7. Lecithin/P338 nanoparticles were stable at pH 7 but unstable at pH 3. Only lecithin/P338 nanoparticles exhibited stability in response to temperature changes, despite an increase in their size with decreasing temperature. Loading a model protein with a high isoelectric point (pI) in liposome/poloxamer nanoparticles seemed impossible. A model protein with low pI was efficiently loaded in lecithin/poloxamer nanoparticles, and the maximum loading capacity of lecithin/P188 and lecithin/P338 nanoparticles was 14.85 and 42.34 mg/g particle, respectively. However, lecithin/P188 nanoparticles loading this model protein lost their core/shell structure.

Influence of Poloxamer 188 on Anti-Inflammatory and Analgesic Effects of Diclofenac-Loaded Nanoemulsion: Formulation, Optimization and in Vitro/in Vivo Evaluation

In this study, a polymer-stabilized nanoemulsion (PNE) was developed to improve the inflammatory and analgesic activities of diclofenac (DA). DA-PNEs were prepared from sesame oil and poloxamer 188 (P188), polysorbate 80, and span 80 as emulsifiers and optimized by a systematic multi-objective optimization method. The developed DA-PNEs exhibited thermodynamical stability with low viscosity. The mean diameter, PDI, surface charge, and entrapment efficiency of DA-PNEs were 122.49±3.42 nm, 0.226±0.08, -47.3 ± 3.6 mV, and 93.57±3.4 %, respectively. The cumulative in vitro release profile of DA-PNEs was significantly higher than the neat drug in simulated gastrointestinal fluids. The anti-inflammatory activities of DA-PNEs were evaluated in the λ-carrageenan-induced paw edema model. To investigate the effect of P188 on analgesic and anti-inflammatory activities, a formulation without P188 was also prepared and named DA-NEs. Following oral administration, DA-PNEs showed a significantly higher (p<0.05) effect in reducing pain and inflammation symptoms as compared to free diclofenac and DA-NEs. Moreover, histopathological examination confirmed that DA-PNEs meaningfully reduced the extent of paw edema, comparable to that of DA. Taken together, the findings of the in vitro and in vivo studies suggest that diclofenac-loaded P188-stabilized nanoemulsion can be considered a potential drug delivery system for treating and controlling inflammatory disorders and alleviating pains.

Design and evaluation of in situ gel eye drops containing nanoparticles of Gemifloxacin Mesylate

Traditional eye drops used for topically administering drugs have poor ocular bioavailability due to the biological barriers of the eye. There is an interest to design and develop novel drug delivery systems that would extend the precorneal residence time, reduce the frequency of administration and decrease dose-related toxicity. This study aimed to prepare Nanoparticles of Gemifloxacin Mesylate and incorporate them into an in situ gel. The nanoparticles were prepared by ionic gelation technique, using 3² factorial design. Sodium tripolyphosphate (STPP) was used to crosslink Chitosan. The optimized formulation of the nanoparticles (GF4) contained 0.15% Gemifloxacin Mesylate, 0.15% Chitosan and 0.20% STPP, producing 71 nm particle size and 81.11% entrapment efficiency. The prepared nanoparticles showed biphasic release, with an initial burst release of 15% in 1.0 hr and a cumulative drug release of 90.53% at the end of 24 hrs. After that, the prepared nanoparticles were incorporated into an in situ gel, using Poloxamer 407, producing a sustained drug release with efficient antimicrobial activity against gram-positive and gram-negative bacteria as confirmed by the cup plate method.

Overcoming blood-brain barrier for targeted delivery of lysosome-targeting chimeras

In a recent Chem article, Liu et al.1 introduced polydopamine-based lysosome-targeting chimeras (KPLYs). In in vitro cellular models, KPLYs adeptly cross the blood-brain barrier to target and eliminate β-amyloid aggregates. They also reduce inflammation and modulate microglial activity.

The immune-stealth polymeric coating on drug delivery nanocarriers: In vitro engineering and in vivo fate

Although essential nanosystems such as nanoparticles and nanocarriers are desirable options for transporting various drug molecules into the biological environment, they rapidly remove from the circulatory system due to their interaction with multiple in vivo barriers, especially the immune barrier, which will result in their short-term effects. In order to improve their effectiveness and durability in the circulatory system, the polymer coatings can use to cover the surface of nanoparticles and nanocarriers to conceal them from the immune system. Due to their different properties (like charge, elasticity, and hydrophilicity/hydrophobicity), these coatings can improve drug delivery nanosystem durability and therapeutic applications. The mentioned coatings have different types and are divided into various categories, such as synthetic polymers, polysaccharides, and zwitterionic polymers. Each of these polymers has unique properties based on its category, origin, and chemical structure that make them suitable for producing stealth drug delivery nanocarriers. In this review article, we have tried to explain the importance of these diverse polymer coatings in determining the fate of drug nanocarriers and then introduced the different types of these coatings and, finally, described various methods that directly and indirectly analyze the nanocoatings to determine the stability of nanoparticles in the body.

Substituent directed cellular imaging in the 800-850 nm range with BF2-azadipyrromethene fluorophores

Three bis(anilino)-substituted NIR-AZA fluorophores have been designed, synthesized and tested to bridge the availability gap of molecular fluorophores for live-cell microscopy imaging in the 800-850 nm spectral range. The concise synthetic route allows for the later stage introduction of three tailored peripheral substituents which guides the sub-cellular localization and imaging. Live-cell fluorescence imaging of lipid droplets, plasma membrane and cytosolic vacuoles was successfully achieved. Photophysical and internal charge transfer (ICT) properties of each fluorophore were examined through solvent studies and analyte responses.

Antimicrobial photodynamic therapy mediated by methylene blue-loaded polymeric micelles against Streptococcus mutans and Candida albicans biofilms

BACKGROUND

Streptococcus mutans and Candida albicans can colonize the teeth, the oral cavity as biofilm and can cause oral infections. Thus, strategies to prevent and control oral biofilms are requested. The present study aims the development and characterization of methylene blue (MB)-loaded polymeric micelles for antimicrobial photodynamic therapy (aPDT) against Streptococcus mutans and Candida albicans biofilms METHODS: MB-loaded polymeric micelles were produced and characterized by particle size, polydispersity index, morphology, zeta potential, stability, MB release profile, and antimicrobial effect against S. mutans and C. albicans biofilms.

RESULTS

MB-loaded polymeric micelles showed a reduced particle size, moderate polydisperse profile, spherical and neutral shape, which demonstrated to be promising features to allow micelles penetration into biofilms. Antimicrobial effect against bacterial and yeast biofilms was demonstrated once MB was irradiated by light under 660 nm (aPDT). Furthermore, MB-loaded polymeric micelles showed significant inhibition of S. mutans and C. albicans biofilms. Furthermore, the treatment with MB-micelles incubated with high pre-incubation times (15 and 30 min) were more effective than 5 min. It can be explained by the time required for this nanosystem to penetrate the innermost layer of biofilms and release MB for aPDT.

CONCLUSION

MB-loaded polymeric micelles can effectively decrease the bacteria and yeast viability and it may cause positive impacts in the clinical practice. Thus, the developed formulation showed potential in the treatment to remove oral biofilms, but clinical studies are needed to confirm its potential.

Exploiting directed self-assembly and disassembly for off-to-on fluorescence responsive live cell imaging

A bio-responsive nanoparticle was formed by the directed self-assembly (DSA) of a hydrophobic NIR-fluorophore with poloxamer P₁₈₈. Fluorophore emission was switched off when part of the nanoparticle, however upon stimulus induced nanoparticle dis-assembly the emission switched on. The emission quenching was shown to be due to fluorophore hydration and aggregation within the nanoparticle and the turn on response attributable to nanoparticle disassembly with embedding of the fluorophore within lipophilic environments. This was exploited for temporal and spatial live cell imaging with a measurable fluorescence response seen upon intracellular delivery of the fluorophore. The first dynamic response, seen within minutes, was from lipid droplets with other lipophilic regions such as the endoplasmic reticulum, nuclear membranes and secretory vacuoles imageable after hours. The high degree of fluorophore photostability facilitated continuous imaging for extended periods and the off to on switching facilitated the real-time observation of lipid droplet biogenesis as they emerged from the endoplasmic reticulum. With an in-depth understanding of the principles involved, further assembly controlling functional responses could be anticipated.

Preparation, characterization, and evaluation of anti-tyrosinase activity of solid lipid nanoparticles containing Undecylenoyl phenylalanine (Sepiwhite®)

BACKGROUND

Hyperpigmentation is darkened patches or spots on the skin occurred by increased melanin. Undecylenoyl phenylalanine (Sepiwhite®), as a commercial lipophilic derivative of phenylalanine, is a powerful new brightener that can be used in the treatment of skin pigmentation disorders.

AIMS

Solid lipid nanoparticles (SLNs) increase the efficiency of hydrophobic drugs. The current study aimed to prepare and characterize SLNs containing Sepiwhite (SEPI-SLN).

METHODS

In this study, an optimized SEPI-SLN formulation was selected by applying the response surface method. In vitro drug loading content, the release profile of SEPI, and cell viability were investigated. The permeation rate of SEPI-SLN was also compared to conventional cream containing Sepiwhite (SEPI-CREAM). Furthermore, the anti-tyrosinase activity of Sepiwhite was also evaluated.

RESULTS

The optimized formulation showed a spherical morphology with particle size and entrapment efficiency of 218.6 ± 11.1 nm and % 87.31 ± 0.65, respectively. Differential scanning calorimetry (DSC) analysis confirmed SEPI-loaded SLN formulation with no drug-lipid incompatibility. The in vitro permeation experiment revealed the enhanced cutaneous uptake of SEPI-SLN. The results also showed that Sepiwhite could stop melanogenesis with inhibition of the tyrosinase enzyme.

CONCLUSION

Our findings confirm that SLNs could be a proper nanocarrier for the relevant usage of Sepiwhite as a powerful brightener agent.

Engineered Magnetic Polymer Nanoparticles Can Ameliorate Breast Cancer Treatment Inducing Pyroptosis-Starvation along with Chemotherapy

Nanotechnology has shown a revolution in cancer treatments, including breast cancers. However, there remain some challenges and translational hurdles. Surgery, radiotherapy, and chemotherapy are the primary treatment methods for breast cancer, although drug combinations showed promising results in preclinical studies. Herein we report the development of a smart drug delivery system (DDS) to efficiently treat breast cancer by pyroptosis-starvation-chemotherapeutic combination. Cancer-starvation agent glucose oxidase was chemically attached to synthesized iron oxide nanoparticles which were entrapped inside poly(lactic-co-glycolic acid) along with apoptosis-associated speck-like protein containing a caspase recruitment domain plasmid and paclitaxel (PTX). An emulsion solvent evaporation method was used to prepare the DDS. The surface of the DDS was modified with chitosan to which aptamer was attached to achieve site-specific targeting. Hence, the prepared DDS could be targeted to a tumor site by both external magnet and aptamer to obtain an enhanced accumulation of drugs at the tumor site. The final size of the aptamer-decorated DDS was less than 200 nm, and the encapsulation efficiency of PTX was 76.5 ± 2.5%. Drug release from the developed DDS was much higher at pH 5.5 than at pH 7.4, ensuring the pH sensitivity of the DDS. Due to efficient dual targeting of the DDS, in vitro viability of 4T1 cells was reduced to 12.1 ± 1.6%, whereas the nontargeted group and free PTX group could reduce the viability of cells to 29.2 ± 2.4 and 46.2 ± 1.6%, respectively. Our DDS showed a synergistic effect in vitro and no severe side effects in vivo. This DDS has strong potential to treat various cancers.

Poloxamer-Based Scaffolds for Tissue Engineering Applications: A Review

Poloxamer is a triblock copolymer with amphiphilicity and reversible thermal responsiveness and has wide application prospects in biomedical applications owing to its multifunctional properties. Poloxamer hydrogels play a crucial role in the field of tissue engineering and have been regarded as injectable scaffolds for loading cells or growth factors (GFs) in the last few years. Hydrogel micelles can maintain the integrity and stability of cells and GFs and form an appropriate vascular network at the application site, thus creating an appropriate microenvironment for cell growth, nerve growth, or bone integration. The injectability and low toxicity of poloxamer hydrogels make them a noninvasive method. In addition, they can also be good candidates for bio-inks, the raw material for three-dimensional (3D) printing. However, the potential of poloxamer hydrogels has not been fully explored owing to the complex biological challenges. In this review, the latest progress and cutting-edge research of poloxamer-based scaffolds in different fields of application such as the bone, vascular, cartilage, skin, nervous system, and organs in tissue engineering and 3D printing are reviewed, and the important roles of poloxamers in tissue engineering scaffolds are discussed in depth.

Oil-Based Delivery Control Release System Targeted to the Later Part of the Gastrointestinal Tract-A Mechanistic Study

Oil-based drug delivery systems have been studied in different aspects. The present study proposes a new application for an oil-based delivery system, focusing on controlled release until the drug reaches the later part of the small intestine. Bulk surfactants and interfacial surfactants were added into the oil formulation to provide a better mechanistic understating of the lipolysis. Validation of the modified in vitro method shows the overall conversion from medium-chain triglyceride oil (MCT oil) to free fatty acids (FFA) of 100 ± 4% in five replicates. This fully converted level and high reproducibility are fundamental for the following investigations where any retarding effect can be distinguished from the experimental errors. The results show that viscosity and thermodynamic activity have limited retardation. Furthermore, the former may change the kinetics of lipolysis, while the latter changes the equilibrium level. The gel-forming retarder (ethylcellulose) displayed a strong effect. Whereas the lipolysis was significantly retarded (>50%) when the retarders altered the interfacial composition (poloxamer 407), degradable interfacial surfactants did not have the same effect. However, surface-active, lipolysis-resistant retarders with a high CMC did not show a retarding effect.

Injectable In Situ Gelling System for Sustained Nicotine Delivery as a Replacement Therapy for Smoking Cessation

Nicotine replacement therapy (NRT) is widely used to limit the withdrawal symptoms associated with cigarette smoking cessation. However, the available NRT formulations are limited by their short release profiles, requiring frequent administrations along with local side effects. Thus, the objective of this study is to develop an NRT formulation that offers prolonged, sustained nicotine release. Thermoresponsive in situ gelling systems containing nicotine were prepared using poloxamer 407 (P407) and poloxamer 188 (P188). The system was optimized using a three-factor, two-level full factorial design (23). A formulation composed of P407 (20% w/w), P188 (5% w/w), and loaded with nicotine (0.5% w/w) exhibited sol-to-gel transition at a suitable temperature close to physiological temperature (30 °C). The rheological analysis demonstrated a Newtonian-like flow at room temperature, suggesting ease of administration via injection, and semisolid gel status at physiological temperature. The optimized formulation successfully sustained nicotine in vitro release over 5 days following single administration. The findings suggest that poloxamer based in situ gelling systems are promising platforms to sustain the release of nicotine.

Transition from Amorphous Cyclosporin A Nanoparticles to Size-Reduced Stable Nanocrystals in a Poloxamer 407 Solution

Amorphous drug nanoparticles usually exhibit low storage stability. A comprehensive understanding of the molecular states and physicochemical properties of the product is indispensable for designing stable formulations. In the present study, an amorphous cyclosporin A (CyA) nanosuspension with a mean particle size of approximately 370 nm was prepared by wet bead milling with poloxamer 407 (P407). Interestingly, the prepared amorphous CyA nanoparticles were transformed into uniform CyA nanocrystals with a reduced mean particle size of approximately 200 nm during storage at 25 °C. The CyA nanocrystals were stably maintained for at least 1 month. The particle morphologies and molecular structures of the CyA nanosuspensions before and after storage were thoroughly characterized by cryogenic transmission electron microscopy and magic-angle spinning nuclear magnetic resonance spectroscopy, respectively. They revealed that the freshly prepared amorphous CyA nanoparticles (∼370 nm) were secondary particles composed of aggregated primary particles with an estimated size of 50 nm. A portion of P407 was found to be entrapped at the gaps between the primary particles due to aggregation, while most of P407 was dissolved in the solution either adsorbing at the solid/liquid interface or forming polymeric micelles. The entrapped P407 is considered to play an important role in the destabilization of the amorphous CyA nanoparticles. The resultant CyA nanocrystals (∼200 nm) were uniform single crystals of Form 2 hydrate and showed corner-truncated bipyramidal features. Owing to the narrow particle size distribution of the CyA nanocrystals, the rate of Ostwald ripening was slow, giving long-term stability to the CyA nanocrystals. This study provides new insights into the destabilization mechanism of amorphous drug nanoparticles.

The Effect of Glucose and Poloxamer 188 on Red-Blood-Cell Aggregation

Glucose metabolism disorders contribute to the development of various diseases. Numerous studies show that these disorders not only change the normal values of biochemical parameters but also affect the mechanical properties of blood. To show the influence of glucose and poloxamer 188 (P188) on the mechanical properties of a red-blood-cell (RBC) suspension, we studied the aggregation of the cells. To show the mechanisms of the mechanical properties of blood, we studied the effects of glucose and poloxamer 188 (P188) on red-blood-cell aggregation. We used a model in which cells were suspended in a dextran 70 solution at a concentration of 2 g/dL with glucose and P188 at concentrations of 0–3 g/dL and 0–3 mg/mL, respectively. RBC aggregation was determined using an aggregometer, and measurements were performed every 4 min for 1 h. Such a procedure enabled the incubation of RBCs in solution. The aggregation index determined from the obtained syllectograms was used as a measure of aggregation. Both the presence of glucose and that of P188 increased the aggregation index with the incubation time until saturation was reached. The time needed for the saturation of the aggregation index increased with increasing glucose and P188 concentrations. As the concentrations of these components increased, the joint effect of glucose and P188 increased the weakening of RBC aggregation. The mechanisms of the observed changes in RBC aggregation in glucose and P188 solutions are discussed.

Amphiphilic triblock copolymer as the gas chromatographic stationary phase with high-resolution performance towards a wide range of isomers and the components of lemon essential oil

This work presents the investigation of using the amphiphilic triblock copolymer composed of poly(ethylene oxide)(PEO)-poly(propylene oxide) (PPO)-poly(ethylene oxide) (PEO) (denoted as EPE) as the stationary phase for gas chromatographic (GC) analyses. The EPE capillary column exhibited moderate polarity and column efficiency of 4348 plates/m determined by naphthalene at 120 °C (k = 11.52). Different from the PEG and polysiloxane homopolymers, it showed high-resolution performance towards a wide range of aliphatic and aromatic isomers in terms of polarity and acid-base properties. Particularly, the EPE column displayed distinct advantages for separating the critical isomers of alkanes, anilines and phenols and the components of the lemon essential oil over the commercial PEG and polysiloxane columns. In addition, the EPE column exhibited excellent separation repeatability and reproducibility with the relative standard deviation (RSD) values in the range of 0.03% - 0.08% for run-to-run, 0.14% - 0.61% for day-to-day and 3.1% - 4.0% for column-to-column, respectively. Moreover, the EPE column was investigated in terms of thermal stability, the minimum allowable operating temperature (MiAOT) and sample loadability. Its application to GC-MS analysis of the essential oil demonstrated its feasibility for practical analyses. This work demonstrates the promising future of triblock copolymers as a new class of selective stationary phases for GC analyses, which is barely reported up to date. The findings of this work is of important value for fundamental researches and practical applications.

Dual targeting smart drug delivery system for multimodal synergistic combination cancer therapy with reduced cardiotoxicity

This study first reports the development of a smart drug delivery system (DDS) for multimodal synergistic cancer therapy combining chemo-photothermal-starvation approaches. A magnetic photothermal agent was synthesized by preparing iron oxide (IO) nanoparticles (NPs) with covalently attached indocyanine green (ICG) and glucose oxidase (GOx) (ICGOx@IO). Synthesized ICGOx@IO NPs were co-encapsulated with doxorubicin (Dox) and EGCG ((-)-epigallocatechin-3-gallate) inside PLGA (poly(lactic-co-glycolic acid)) NPs using multiple emulsion solvent evaporation method. Such formulation gave the advantage of triggered drug release by near-infrared (NIR) laser irradiation (808 nm at 1 W/cm²). RGD peptide was attached to the surface of PLGA NPs and the final hydrodynamic size was around 210 nm. Dual targeting by peptide and 240 mT external magnet significantly improved cellular uptake. Cellular uptake was observed using FACS, electron and optical microscopy. Dual targeting along with laser irradiation could reduce in vitro cell viability by 90 ± 2% (Dox-equivalent dose: 10 µg/ml) and complete tumor ablation was achieved in vivo due to synergetic therapeutic effect. Another attractive feature of the DDS was the significant reduction of cardiotoxicity of doxorubicin by EGCG. This new platform is thus expected to hold strong promise for future multimodal combination therapy of cancers. STATEMENT OF SIGNIFICANCE: Doxorubicin is one of the most studied and effective chemotherapeutic agents whose application is hindered due to its cardiotoxicity. In this study, we used (-)-Epigallocatechin-3-gallate (EGCG) to overcome that limitation. However, drug delivery to tumor sites with no/minimum accumulation in healthy organs is always challenging. Although peptide-based targeting is very popular, the effectiveness of receptor/ligand binding active targeting is sometimes questioned which motivated us to apply dual targeting approach. Multimodal therapies can exhibit synergistic effects and subsequently reduce the required dose of drug over monotherapy. We aimed to achieve chemo-photothermal-starvation combination therapy in this study and such achievement is yet to be reported. Our developed system also has the advantage of triggered drug release by near-infrared (NIR) laser irradiation.

Surface Functionalization of PLGA Nanoparticles to Increase Transport across the BBB for Alzheimer’s Disease

Alzheimer’s disease (AD) is a chronic neurodegenerative disorder that accounts for about 60% of all diagnosed cases of dementia worldwide. Although there are currently several drugs marketed for its treatment, none are capable of slowing down or stopping the progression of AD. The role of the blood-brain barrier (BBB) plays a key role in the design of a successful treatment for this neurodegenerative disease. Nanosized particles have been proposed as suitable drug delivery systems to overcome BBB with the purpose of increasing bioavailability of drugs in the brain. Biodegradable poly (lactic-co-glycolic acid) nanoparticles (PLGA-NPs) have been particularly regarded as promising drug delivery systems as they can be surface-tailored with functionalized molecules for site-specific targeting. In this review, a thorough discussion about the most recent functionalization strategies based on PLGA-NPs for AD and their mechanisms of action is provided, together with a description of AD pathogenesis and the role of the BBB in brain targeting.

Highlights in poloxamer-based drug delivery systems as strategy at local application for vaginal infections

Infectious diseases related to the vagina include diseases caused by the imbalance of the vaginal flora and by sexually transmitted infections. Some of these present themselves as a public health problem due to the lack of efficient treatment that leads to their complete cure, and others due to the growing resistance to drugs used in therapy. In this sense, new treatment strategies are desirable, with vaginal administration rout being a great choice since can bypass first-pass metabolism and decrease drug interactions and adverse effects. However, it is worth highlighting limitations related to patient's discomfort at application time. Thereby, the use of poloxamer-based drug delivery systems is desirable due its stimuli-sensitive characteristic. Therefore, the present review reports a brief overview of poloxamer properties, biological behavior and advances in poloxamer applications in controlled drug release systems for infectious diseases related to the vagina treatment and prevention.

In vivo study of hypericin-loaded poloxamer-based mucoadhesive in situ gelling liquid crystalline precursor system in a mice model of vulvovaginal candidiasis

The present study reports the performance of the pigment hypericin (HYP)-loaded poloxamer-based mucoadhesive in situ gelling liquid crystalline precursor system (LCPS) for the treatment of vulvovaginal candidiasis (VVC) in mice. LCPS composed of 40% of ethoxylated and propoxylated cetyl alcohol, 30% of oleic acid and cholesterol (7:1), 30% of a dispersion of 16% poloxamer 407 and 0.05% of HYP (HYP-LCPS) was prepared and characterized by polarized light microscopy (PLM), small-angle X-ray scattering (SAXS) and ex vivo permeation and retention studies across vaginal porcine mucosa were performed. In addition, the antifungal properties of the HYP-LCPS were evaluated in a murine in vivo model; for this, infected C57BL female mice groups were treated with both HYP in solution and HYP-LCPS, and after 6 days colony forming unit (CFU)/ml count was performed. PLM and SAXS confirmed that HYP-LCPS is a microemulsion situated in boundary transition region confirming its action as an LCPS. When in contact with simulated vaginal fluid, HYP-LCPS became rigid and exhibited maltase crosses and bragg peaks characteristics of lamellar phase. Ex vivo permeation and retention studies showed that HYP-LCPS provides a localized treatment on the superficial layers of porcine vaginal mucosa. HYP-LCPS induced a significant reduction in the number of CFU/ml in the mice; thus this formulation indicated it is as effective as a commercial dosage form. It was concluded that LCPS maintains the biological activity of HYP and provides an adequate drug delivery system for this lipophilic molecule at the vaginal mucosa, being a promising option in cases of VVC.

Control of Vancomycin Activity through the Encapsulation and Controlled Release from a Propargyl Acrylate-Poloxamer Nanocomposite System

Vancomycin is a potent antibacterial drug that suffers from poor bioavailability due to its poor water solubility and relatively high molecular weight. Consequently, the application of vancomycin to treat bacteria-induced disease is limited. In this study, the ability of a temperature-stimulated propargyl acrylate-poloxamer nanocomposite (PAPN) system to encapsulate and release vancomycin is investigated. A controllable encapsulation and release system can be used to not only increase and prolong the bioavailability of vancomycin but also activate vancomycin with a temperature change. The PAPN system was prepared using an emulsion polymerization of propargyl acrylate followed by a surface decoration with a poloxamer at a precisely controlled grafting density. The activity of the PAPN system loaded with vancomycin is compared to that of the free drug and unmodified propargyl acrylate nanoparticles. It is shown that the activity of the PAPN system loaded with vancomycin is comparable to that of a freshly prepared, free-floating vancomycin solution. Upon storage, the activity of the free vancomycin in solution decreases, while the PAPN system loaded with vancomycin retains its high activity. Additionally, the PAPN system is able to effectively encapsulate and deactivate vancomycin until heated above a lower critical solution temperature (LCST). At temperatures above the LCST, the PAPN system releases vancomycin restoring the activity of the drug.

Conjugated linoleic acid loaded nanostructured lipid carrier as a potential antioxidant nanocarrier for food applications

The encapsulation of fatty acids in nanocarrier systems is a very effective technique in improving their biological efficiency and controlled delivery. Nanostructured lipid carrier (NLC) is a major type of lipid-based nanoparticle. This study is focused on producing nanolipid carrier containing conjugated linoleic acid and fortifying low-fat milk using this nanoparticle. Nanostructured lipid carriers were produced by hot high-shear homogenization containing 1.5% Poloxamer 407, cocoa butter as solid lipid, and conjugated linoleic acid as liquid oil in ratio of 10:1. Results showed that the nanoparticles sized 81 nm with monomodular dispersity and the system was stable at 4 and 22°C for 40 days. Zeta potential and encapsulation efficiency (%EE) were -15.8 mV and 98.2%, respectively. Scanning electron microscopy (SEM) showed that the particles are in spiral form and small size and no significant aggregation was observed because of few changes in the system turbidity after storage time. The result of oxidative stability showed that using Nanostructured lipid carriers system resulted in lower malone dialdehyde production. Conjugated linoleic acid was protected at level of 3.9% of milk fatty acids in Nanostructured lipid carrier formulation during storage time. Based on these findings, Nanostructured lipid carriers system is an appropriate and stable nanocarrier system for delivery of nutraceuticals in foods and can be used in protecting them against oxidation, heating, and other processes in order to fortify foods and beverages.

Poloxamer: A versatile tri-block copolymer for biomedical applications

Poloxamers, also called Pluronic, belong to a unique class of synthetic tri-block copolymers containing central hydrophobic chains of poly(propylene oxide) sandwiched between two hydrophilic chains of poly(ethylene oxide). Some chemical characteristics of poloxamers such as temperature-dependent self-assembly and thermo-reversible behavior along with biocompatibility and physiochemical properties make poloxamer-based biomaterials promising candidates for biomedical application such as tissue engineering and drug delivery. The microstructure, bioactivity, and mechanical properties of poloxamers can be tailored to mimic the behavior of various types of tissues. Moreover, their amphiphilic nature and the potential to self-assemble into the micelles make them promising drug carriers with the ability to improve the drug availability to make cancer cells more vulnerable to drugs. Poloxamers are also used for the modification of hydrophobic tissue-engineered constructs. This article collects the recent advances in design and application of poloxamer-based biomaterials in tissue engineering, drug/gene delivery, theranostic devices, and bioinks for 3D printing. STATEMENT OF SIGNIFICANCE: Poloxamers, also called Pluronic, belong to a unique class of synthetic tri-block copolymers containing central hydrophobic chains of poly(propylene oxide) sandwiched between two hydrophilic chains of poly(ethylene oxide). The microstructure, bioactivity, and mechanical properties of poloxamers can be tailored to mimic the behavior of various types of tissues. Moreover, their amphiphilic nature and the potential to self-assemble into the micelles make them promising drug carriers with the ability to improve the drug availability to make cancer cells more vulnerable to drugs. However, no reports have systematically reviewed the critical role of poloxamer for biomedical applications. Research on poloxamers is growing today opening new scenarios that expand the potential of these biomaterials from "traditional" treatments to a new era of tissue engineering. To the best of our knowledge, this is the first review article in which such issue is systematically reviewed and critically discussed in the light of the existing literature.

Interpreting In Vitro Release Performance from Long-Acting Parenteral Nanosuspensions Using USP-4 Dissolution and Spectroscopic Techniques

Injectable sustained release dosage forms have emerged as desirable therapeutic routes for patients that require life-long treatments. The prevalence of drug molecules with low aqueous solubility and bioavailability has added momentum toward the development of suspension-based long-acting parenteral (LAP) formulations; the previously undesirable physicochemical properties of Biopharmaceutics Classification System (BCS) Class II/IV compounds are best suited for extended release applications. Effective in vitro release (IVR) testing of crystalline suspensions affirms product quality during early-stage development and provides connections with in vivo performance. However, before in vitro-in vivo correlations (IVIVCs) can be established, it is necessary to evaluate formulation attributes that directly affect IVR properties. In this work, a series of crystalline LAP nanosuspensions were formulated with different stabilizing polymers and applied to a continuous flow-through (USP-4) dissolution method. This technique confirmed the role of salt effects on the stability of polymer-coated nanoparticles through the detection of disparate active pharmaceutical ingredient (API) release profiles. The polymer stabilizers with extended hydrophilic chains exhibited elevated intrapolymer activity from the loss of hydrogen-bond cushioning in dissolution media with heightened ionic strength, confirmed through one-dimensional (1D) ¹H NMR and two-dimensional nuclear Overhauser effect spectroscopy (2D NOESY) experiments. Thus, steric repulsion within the affected nanosuspensions was limited and release rates decreased. Additionally, the strength of interaction between hydrophobic polymer components and the API crystalline surface contributed to suspension dissolution properties, confirmed through solution- and solid-state spectroscopic analyses. This study provides a unique perspective on the dynamic interface between the crystalline drug and aqueous microenvironment during dissolution.

Prilling of API/fatty acid suspensions: Screening of additives for drug release modification

Current study screened additives which could modify the drug release from prills made of an active pharmaceutical ingredient/fatty acid (API/FA) suspension, without negatively influencing the processability and/or stability of the formulation. Therefore, 11 additives (i.e. emulsifiers, pore-formers and FA-based lubricants) were added in a 20% concentration to a paracetamol/behenic acid formulation. Two additives, Kolliphor® P338 and P407 provided complete drug release in less than 1 h, as their thermoreversible gel formation resulted in a disintegration of the prills. Lower Kolliphor® P338 or P407 concentrations (2.5-10%) resulted in a complete but slower drug release in 24 h as the prills no longer disintegrated and the release mechanism was dominated by pore-formation. Prills with a robust drug release profile (i.e. independent of pH and surfactant concentration of the dissolution medium) were obtained after the addition of ≥5% Kolliphor® P338 or P407 to the FA-based formulation. Based on a 6-month stability study, it was concluded that Kolliphor® P407 was a suitable additive to modify the drug release profile of API/FA suspension-based prills when formulations were stored below 25 °C at low relative humidity.

Gallic acid loaded poloxamer gel as new adjuvant strategy for melanoma: A preliminary study

The present study describes the production and characterization of poloxamer gels containing the antioxidant molecule gallic acid. The gels were particularly designed in order to obtain a formulation suitable for administration on the skin to treat melanoma. The polymer concentration was selected after rheological characterization and determination of gel transition temperature. In order to study the gallic acid diffusion, in vitro experiments were performed using Franz cells associated to different membranes. As first approach the gallic acid diffusion was evaluated through synthetic membranes, such as cellulose, nylon, polycarbonate, polytetrafluoroethylene, polyvinylidene fluoride and the commercial Strat-M® membrane. The membranes were employed separately or in association and compared to stratum corneum epidermis membranes, in order to find a system able to reproduce the gallic acid diffusion through the skin. Selected membranes were used for studying gallic acid diffusion from poloxamer gel. It was found that the diffusion of gallic acid was dramatically influenced by the type of membrane, both in the case of the aqueous solution or poloxamer gel. Scratch wound healing and migration assays conducted on human keratinocytes and melanoma cells demonstrated the ability of gallic acid loaded gel to inhibit cellular migration, suggesting its potential as adjuvant strategy for melanoma.

Development of stimuli-responsive nano-based pesticides: emerging opportunities for agriculture

Pesticides and fertilizers are widely used to enhance agriculture yields, although the fraction of the pesticides applied in the field that reaches the targets is less than 0.1%. Such indiscriminate use of chemical pesticides is disadvantageous due to the cost implications and increasing human health and environmental concerns. In recent years, the utilization of nanotechnology to create novel formulations has shown great potential for diminishing the indiscriminate use of pesticides and providing environmentally safer alternatives. Smart nano-based pesticides are designed to efficiently delivery sufficient amounts of active ingredients in response to biotic and/or abiotic stressors that act as triggers, employing targeted and controlled release mechanisms. This review discusses the current status of stimuli-responsive release systems with potential to be used in agriculture, highlighting the challenges and drawbacks that need to be overcome in order to accelerate the global commercialization of smart nanopesticides.

pH responsive delivery of lumefantrine with calcium phosphate nanoparticles loaded lipidic cubosomes for the site specific treatment of lung cancer

The present work aim to develop pH responsive nanosystem comprising lumefantrine with calcium phosphate nanoparticles loaded lipidic cubosomes for the effective treatment of lung cancer. FTIR results showed that, compatibility nature of selected excipients for the synthesis of LF-CaP-Cs. The XRD results showed developed LF-CaP-Cs were non crystalline in nature. The selected developed LF-CaP-Cs were in cubic phase with average particle size of 259.4 ± 19 nm with a charge of -2.28 ± 0.7 mV. The encapsulation efficiency for LF within LF-CaP-Cs was about 78.76 ± 0.5%. RP-HPLC analysis showed that LF release rate gets significantly enhanced with higher peak area at pH 4.0 compared to pH 5.0/pH 7.4. The in-vitro release of LF-CaP-Cs showed that LF release gets significantly increased at pH 4.0 (84.04 ± 0.4%) compared to pH 7.4 (48.32 ± 1.6%) at 12 h. Further, CAM assay showed the superior anti-angiogenesis potential of developed LF-CaP-Cs compared to LF-Cs/blank Cs. The cytotoxicity effect of LF-CaP-Cs (28 ± 1.8 μg/mL) was significantly higher than that of free LF (40 ± 0.9 μg/mL). The results of cellular uptake study proved the localization of LF at cellular level and AO/EB staining results revealed that the A549 cell undergoes apoptosis in A549 cells.

Improving Lentiviral Transduction of CD34+ Hematopoietic Stem and Progenitor Cells

The delivery of therapeutic genes for treatment of inherited or infectious diseases frequently requires lentiviral transduction of CD34⁺ hematopoietic stem and progenitor cells (HSC). Optimized transduction protocols with a therapeutic goal aim to maximize the number of transduction-positive cells while limiting the vector copy number that reach each individual cell. Importantly, the transduced HSC should maintain their "stem-like" properties. Here, we analyzed LentiBOOST™ reagent, a membrane-sealing poloxamer, with respect to enhancing lentiviral transduction of CD34⁺ peripheral blood stem cells. We demonstrate that inclusion of LentiBOOST™ in a standard HSC transduction protocol yields high transduction efficiencies while preserving the ability of the transduced HSC to differentiate into various hematopoietic lineages. Thus, LentiBOOST™ reagent can significantly improve lentiviral CD34⁺ HSC transduction protocols with the potential to improve production of gene-modified cell products.

Incorporation of Metallic Species into Midblock-Sulfonated Block Ionomers

Block ionomers can, in the same fashion as their neutral block copolymer analogs, microphase-order into various nanoscale morphologies. The added benefit of a copolymer possessing a charged species is that the resultant block ionomer becomes amphiphilic and capable of imbibing polar liquids, including water. This characteristic facilitates incorporation of metallic species into the soft nanostructure for a wide range of target applications. In this study, the nonpolar and polar constituents of solvent-templated midblock-sulfonated block ionomers (SBIs) are first selectively metallated for complementary morphological analysis. Next, four different salts, with cationic charges ranging from +1 to +3, are introduced into three hydrated SBIs varying in their degree of sulfonation (DOS), and cation uptake is measured as a function of immersion time. These results indicate that uptake generally increases with increasing salt concentration, cationic charge, and specimen DOS. Swelling and nanoindentation measurements conducted at ambient temperature demonstrate that water uptake decreases, while the surface modulus increases, with increasing cationic charge. Chemical spectra acquired from energy-dispersive X-ray spectroscopy (EDS) confirm the presence of each of the ion-exchanged species, and corresponding EDS chemical maps reveal that the spatial distribution of these species is relatively uniform throughout the block ionomer films.

Ginsenoside Drug Nanocomposites Prepared by the Aerosol Solvent Extraction System for Enhancing Drug Solubility and Stability

Ginsenosides are the pharmacologically active constituents of ginseng. So far, more than 30 ginsenosides have been identified and widely used in pharmaceutical formulations. However, the therapeutic applications of ginsenosides are hampered by their poor solubility and low bioavailability. In this study, we selected two of the most important ginsenosides-Re and Rh₂ as model drugs to prepare ginsenoside drug nanocomposites (NanoGS) using the simple aerosol solvent extraction system (ASES) technique to address the poor solubility and bioavailability of these compounds. Compared with raw ginsenosides, NanoGS exhibited significantly enhanced dissolution rate owing to their low crystallinity and high surface area. Furthermore, in vitro cellular investigations showed that NanoGS-Rh₂ exhibited outstanding anticancer activity against MCF-7 cancer cells. Therefore, this study is expected to provide a promising strategy that could optimize and broaden the applications of ginsenosides, as well as other water-insoluble drugs in pharmaceutical formulations.

Formulation of Poloxamers for Drug Delivery

Poloxamers, also known as Pluronics®, are block copolymers of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO), which have an amphiphilic character and useful association and adsorption properties emanating from this. Poloxamers find use in many applications that require solubilization or stabilization of compounds and also have notable physiological properties, including low toxicity. Accordingly, poloxamers serve well as excipients for pharmaceuticals. Current challenges facing nanomedicine revolve around the transport of typically water-insoluble drugs throughout the body, followed by targeted delivery. Judicious design of drug delivery systems leads to improved bioavailability, patient compliance and therapeutic outcomes. The rich phase behavior (micelles, hydrogels, lyotropic liquid crystals, etc.) of poloxamers makes them amenable to multiple types of processing and various product forms. In this review, we first present the general solution behavior of poloxamers, focusing on their self-assembly properties. This is followed by a discussion of how the self-assembly properties of poloxamers can be leveraged to encapsulate drugs using an array of processing techniques including direct solubilization, solvent displacement methods, emulsification and preparation of kinetically-frozen nanoparticles. Finally, we conclude with a summary and perspective.

Adsorption of poly(ethylene oxide)-containing amphiphilic polymers on solid-liquid interfaces: Fundamentals and applications

The adsorption of amphiphilic molecules of varying size on solid-liquid interfaces modulates the properties of colloidal systems. Nonionic, poly(ethylene oxide) (PEO)-based amphiphilic molecules are particularly useful because of their graded hydrophobic-hydrophilic nature, which allows for adsorption on a wide array of solid surfaces. Their adsorption also results in other useful properties, such as responsiveness to external stimuli and solubilization of hydrophobic compounds. This review focuses on the adsorption properties of PEO-based amphiphiles, beginning with a discussion of fundamental concepts pertaining to the adsorption of macromolecules on solid-liquid interfaces, and more specifically the adsorption of PEO homopolymers. The main portion of the review highlights studies on factors affecting the adsorption and surface self-assembly of PEO-PPO-PEO block copolymers, where PPO is poly(propylene oxide). Block copolymers of this type are commercially available and of interest in several fields, due to their low toxicity and compatibility in aqueous systems. Examples of applications relevant to the interfacial behavior of PEO-PPO-PEO block copolymers are paints and coatings, detergents, filtration, and drug delivery. The methods discussed herein for manipulating the adsorption properties of PEO-PPO-PEO are emphasized for their ability to shed light on molecular interactions at interfaces. Knowledge of these interactions guides the formulation of novel materials with useful mesoscale organization and micro- and macrophase properties.

Calcium phosphate nanoparticles prepared from infusion fluids for stem cell transfection: process optimization and cytotoxicity analysis

The preparation of calcium phosphate nanoparticles from infusion fluids for gene delivery to stem cells and CHO-K1 cells is reported.

Novel biodegradable nanocarriers for enhanced drug delivery

With the refinement of functional properties, the interest around biodegradable materials, in biorelated applications and, in particular, in their use as controlled drug-delivery systems, increased in the last decades. Biodegradable materials are an ideal platform to obtain nanoparticles for spatiotemporal controlled drug delivery for the in vivo administration, thanks to their biocompatibility, functionalizability, the control exerted on delivery rates and the complete degradation. Their application in systems for cancer treatment, brain and cardiovascular diseases is already a consolidated practice in research, while the bench-to-bedside translation is still late. This review aims at summarizing reported applications of biodegradable materials to obtain drug-delivery nanoparticles in the last few years, giving a complete overview of pros and cons related to degradable nanomedicaments.