Chromogenic Polymers and Their Packaging Applications: A Review

Thermochromic Polymer Nanocomposites for the Heat Detection System: Recent Progress on Properties, Applications, and Challenges

Reversible thermochromic polymers have emerged as compelling candidates in recent years, captivating attention for their application in heat detection systems. This comprehensive review navigates through the multifaceted landscape, intricately exploring both the virtues and hurdles inherent in their integration within these systems. Their innate capacity to change colour in response to temperature fluctuations renders reversible thermochromic nanocomposites promising assets for heat detection technologies. However, despite their inherent potential, certain barriers hinder their widespread adoption. Factors such as a restricted colour spectrum, reliance on external triggers, and cost considerations have restrained their pervasive use. For instance, these polymer-based materials exhibit utility in the domain of building insulation, where their colour-changing ability serves as a beacon, flagging areas of heat loss or inadequate insulation, thus alerting building managers and homeowners to potential energy inefficiencies. Nevertheless, the limited range of discernible colours may impede precise temperature differentiation. Additionally, dependency on external stimuli, such as electricity or UV light, can complicate implementation and inflate costs. Realising the full potential of these polymer-based materials in heat detection systems necessitates addressing these challenges head-on. Continuous research endeavours aimed at augmenting colour diversity and diminishing reliance on external stimuli offer promising avenues to enhance their efficacy. Hence, this review aims to delve into the intricate nuances surrounding reversible thermochromic nanocomposites, highlighting their transformative potential in heat detection and sensing. By exploring their mechanisms, properties, and current applications, this manuscript endeavours to shed light on their significance, providing insights crucial for further research and potential applications.

A Review of Stimuli-Responsive Smart Materials for Wearable Technology in Healthcare: Retrospective, Perspective, and Prospective

In recent years thanks to the Internet of Things (IoT), the demand for the development of miniaturized and wearable sensors has skyrocketed. Among them, novel sensors for wearable medical devices are mostly needed. The aim of this review is to summarize the advancements in this field from current points of view, focusing on sensors embedded into textile fabrics. Indeed, they are portable, lightweight, and the best candidates for monitoring biometric parameters. The possibility of integrating chemical sensors into textiles has opened new markets in smart clothing. Many examples of these systems are represented by color-changing materials due to their capability of altering optical properties, including absorption, reflectance, and scattering, in response to different external stimuli (temperature, humidity, pH, or chemicals). With the goal of smart health monitoring, nanosized sol-gel precursors, bringing coupling agents into their chemical structure, were used to modify halochromic dyestuffs, both minimizing leaching from the treated surfaces and increasing photostability for the development of stimuli-responsive sensors. The literature about the sensing properties of functionalized halochromic azo dyestuffs applied to textile fabrics is reviewed to understand their potential for achieving remote monitoring of health parameters. Finally, challenges and future perspectives are discussed to envisage the developed strategies for the next generation of functionalized halochromic dyestuffs with biocompatible and real-time stimuli-responsive capabilities.

Proteinic Artificial Skin with Molecularly Encoded Coloration

An ability to integrate adaptive coloration and tissue-like compositions, structures, as well as mechanical properties, and so forth into a material remains elusive. To address this problem, this work presents a solution whereby these features were integrated into a proteinic artificial skin through biomimetic design. In this artificial skin, silk fibroin was used to mimic the structural framework of the cytoskeleton due to its unique molecular network structure and outstanding and tunable mechanical properties. Meanwhile, a thermochromic filamentous network consisting of C₂₅-GAGAGAGY amphiphilic peptides was designed to mimic the functional tracks in the cytoskeleton, enabling its temperature-adaptive coloration ability. The interconnected linkage between the structural frame and functional units makes this artificial skin have stable structures, mechanical properties, and functions. The whole protein composition also makes this artificial skin essentially different from other existing color-tunable artificial skins, which are a combination of organic and inorganic compounds. Furthermore, because the protein composition is compatible with a range of dyes, the chromatic gamut of adaptive coloration of the developed artificial skin can be further expanded by color fusion. With the further inclusion of other functional units, such as photothermal and magnetothermal nanoparticles, the thermochromism of the artificial skin could be realized through sun exposure and alternating magnetic field modulation. With this diversity in color change pathways and stimulation mode, as well as the environmental friendliness of the material used, these artificial proteinic skins have promising applications as sensors in physiological monitoring, food preservation, and anti-counterfeiting.

DFT study on some polythiophenes containing benzo[d]thiazole and benzo[d]oxazole: structure and band gap

The content of this paper focuses/shed light on the effects of X (X = S in P1 and X = O in P2) in C11H7NSX and R (R = H in P3, R = OCH3 in P4, and R = Cl in P5) in C18H9ON2S2-R on structural features and band gaps of the polythiophenes containing benzo[d]thiazole and benzo[d]oxazole by the Density Function Theory (DFT) method/calculation. The structural features including the electronic structure lattice constant (a), shape, total energy (Etot) per cell, and link length (r), are measured via band gap (Eg) prediction with the package of country density (PDOS) and total country density (DOS) of material studio software. The results obtained showed that the link angle and the link length between atoms were not changed significantly while the Etot was decreased from Etot = - 1904 eV (in P1) to Etot = - 2548 eV (in P2) when replacing O with S; and the Etot of P3 was decreased from Etot = - 3348 eV (in P3) when replacing OCH3, Cl on H of P3 corresponding to Etot = - 3575 eV (P4), - 4264 eV (P5). Similarly, when replacing O in P1 with - S to form P2, the Eg of P1 was dropped from Eg = 0.621 eV to Eg = 0.239 eV for P2. The Eg of P3, P4, and P5 is Eg = 0.006 eV, 0.064 eV, and 0.0645 eV, respectively. When a benzo[d]thiazole was added in P1 (changing into P3), the Eg was extremely strongly decreased, nearly 100 times (from Eg = 0.621 eV to Eg = 0.006 eV). The obtained results serve as a basis for future experimental work and used to fabricate smart electronic device.

Spiropyran dyes

This article furnishes an introduction to one of the most well-known classes of photochromic colorant. While the properties of spiropyran dyes inspired pioneering efforts to exploit photochromism for industrial applications, their lack of robustness held them back from commercialization. Nevertheless, this type of dye remains at the heart of much of the work to develop light-responsive materials upon which many potential applications in different fields of scientific and technological endeavor depend. The article describes the photochromism, synthesis, and applications of spiropyran colorants with an emphasis on the structural subtype that has attracted the greatest scrutiny. It also acts as a springboard to sources of more detail on these aspects.

Stimuli-Induced Reversible Proton Transfer for Stimuli-Responsive Materials and Devices

ConspectusStimuli-responsive materials have a great potential in various novel photoelectric devices, such as self-adaptive adjustment devices, intelligent detection, molecular computers with information storage capability, camouflage and anticounterfeiting display, various energy-saving displays, and others. However, progress in related areas has been relatively slow because of the lack of high-performance smart materials and the limitations of available reaction mechanisms currently. To address these problems fundamentally, new mechanisms need to be designed and developed, and learning from nature is an effective and intelligent method to achieve this long-awaited target, such as mimicking of proton transfer processes in nature at the molecular/supramolecular level. The stimuli-induced reversible proton transfer system is composed of materials that release or capture protons in response to stimuli and switch molecules that control color and/or fluorescence modulation by protons, and it is applied in stimuli-responsive materials and devices, including bistable electronic/electrochromic devices, electrofluorochromic devices, water-jet rewritable paper, visible-light-responsive rewritable paper, and mechanochromic materials.To help researchers gain deep insight into stimuli-induced reversible proton transfer, we attempted to summarize its reaction mechanism and design principle, and discuss strategies to design and prepare various related stimuli-responsive materials and devices. This Account discusses the different systems in which a color/fluorescence change is induced by the proton transfer process under various stimuli, including electric field, water, light, heat, and stress. Relative very promising applications as well as their performance especially for energy-saving and environmentally friendly devices are then summarized, such as energy-saving bistable electrochromic devices, water-jet rewritable paper, and visible-light-responsive rewritable paper. Meanwhile, we focus on the key influence factors and useful additives for improving the device's performance. At last, challenges and bottlenecks faced by stimuli-responsive materials and devices based on the mechanism of reversible proton transfer are proposed. Moreover, we put forward some suggestions on solving these limitations.These exciting results reveal that smart materials based on the mechanism of proton transfer are extremely attractive and possess great potential in the next generation of energy and resource saving and environmental protection display. We hope that this Account further prospers the field of intelligent stimuli-responsive discoloration materials and next-generation green displays.

Effect of doped H, Br, Cu, Kr, Ge, As and Fe on structural features and bandgap of poly C13H8OS-X: a DFT calculation

Structural features such as the shape, the lattice constant, the bond length, the total energy per cell, and the energy bandgap (Eg) of C13H8OS-X are studied by the calculating Partial Density Of States (PDOS), and DOS package of the Material Studio (MS) software. Calculations show that the bond length and the bond angle between atoms insignificant change as 1.316 Å to 1.514 Å for C-C, 1.211 Å for C-O, 1.077 Å to 1.105 Å for C-H; bond angle of round one changes from 118.883° to 121.107° for C-C-C, from 117.199° to 122.635° for H-C-C, from 119.554° to 123.147° for C-C-O and from 109.956° to 117.537° for C-C-H. When C13H8OS-X doped in the order of -Br, -Cu, -Kr, -Ge, -As, and -Fe then bond lengths, bond angles between atoms have a nearly constant value. Particularly for links C-X, there is a huge change in value, respectively 1.876, 1.909, 10.675, 2.025, 2.016, 2.014 Å; the total energy change from Etot = -121,794 eV to Etot = -202,859 eV, and the energy band gap decreases from Eg = 2.001 eV to Eg = 0.915 eV. The obtained results are useful and serve as a basis for future experimental research.