Novel phosphorous–nitrogen containing poly(aryl ether ketone)s: synthesis, characterization, and thermal properties

Design and synthesis of novel poly (aryl ether ketones) containing trifluoromethyl and trifluoromethoxy groups

The high-frequency and high-speed communication in the 5 G era puts forward requirements for the dielectric properties of polymers. Introducing fluorine into poly(ary ether ketone) can improve its dielectric properties. In this work, by introducing the fluorine group strategy, we successfully designed and synthesized three novel trifluoromethyl (-CF₃) or trifluoromethoxy (-OCF₃)-containing bisphenol monomers and their F-substitution PEK-based polymers (PEK-Ins). All these PEK-Ins exhibited good thermal, mechanical and dielectric properties. The T d5% of the three polymers is all higher than 520℃. The free volume fraction of novel polymers increased from 3.75% to 5.72%. Among the three polymers, exhibited the lowest dielectric constant of the films is 2.839, and the dielectric loss is 0.0048, ascribing to the increasing free volume. The Young's modulus of the polymer film is as high as 2.9 GPa and the tensile strength is as high as 84 MPa. PEK-Ins reduced the dielectric constant by introducing a low fluorine content. This study provides a new way to design PEK to synthesize low dielectric constant polymers.

Improving the Durability and Performance of Sulfonated Poly(arylene ether)s by Introducing 9,10-Dihydro-9-oxa-10-phosphaphenanthrene 10-oxide Structure for Fuel Cell Application

Polymer electrolyte membranes in which the hydrophilic and hydrophobic domains phase separate exhibit improved properties and stability. Such a phase separation of hydrophilic and hydrophobic domains can be achieved by polymerizing a 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide-bisphenol A (DOPO-BPA) and 1,4-bis(4-fluorobenzoyl)benzene (1,4-FBB) monomer. In this work, sulfonated polymer membranes with various degrees of sulfonation (DS) were prepared and their physicochemical and electrochemical properties were studied. In addition, the effect of molecular structure on the durability of the copolymers was investigated. The sulfonated copolymers were characterized by Fourier-transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy. Then, sulfonated membranes were prepared using these copolymers by the solvent casting method, and their morphologies were investigated by atomic force microscopy. The effect of DS on the thermal, mechanical, and oxidative stabilities, water uptake behavior, and ion-exchange capacity of the membranes was determined. The results showed that compared with the commercially available Nafion 212 polymer electrolyte membrane, the electrolyte membrane based on DOPO-BPA and 1,4-FBB exhibited a lower water uptake and excellent dimensional stability despite having a relatively high ion-exchange capacity. The low water uptake is an important characteristic that ensures the stability of the polymer electrolyte membrane in fuel cell applications.