Thermally stable hybrid polyarylidene(azomethine-ether)s polymers (PAAP): an ultrasensitive arsenic(III) sensor approach

Understanding Degradation Dynamics of Azomethine-containing Conjugated Polymers

Understanding the influence of chemical environments on the degradation properties of conjugated polymers is an important task for the continued development of sustainable materials with potential utility in biomedical and optoelectronic applications. Azomethine-containing polymers were synthesized via palladium-catalyzed direct arylation polymerization (DArP) and used to study fundamental degradation trends upon exposure to acid. Shifts in the UV-vis absorbance spectra and the appearance/disappearance of aldehyde and imine diagnostic peaks within the 1H NMR spectra indicate that the polymers will degrade in the presence of acid. After degradation, the aldehyde starting material was recovered in high yields and was shown to maintain structural integrity when compared with commercial starting materials. Solution-degradation studies found that rates of degradation vary from 5 h to 90 s depending on the choice of solvent or acid used for hydrolysis. Additionally, the polymer was shown to degrade in the presence of perfluoroalkyl substances (PFASs), which makes them potentially useful as PFAS-sensitive sensors. Ultimately, this research provides strategies to control the degradation kinetics of azomethine-containing polymers through the manipulation of environmental factors and guides the continued development of azomethine-based materials.

The enhanced photocatalytic performance of CPAA doping with different concentrations of Titanium oxide nanocomposite against MB dyes under simulated sunlight irradiations

The pure conjugated polyarylene azomethine (CPAA) and its nanocomposites (CPAA-TiO2) with different concentrations of TiO2 nanoparticles were successfully prepared by in-situ technique and analyzed by different advanced techniques. XRD has confirmed the structural properties and crystallinity of (CPAA) and nanocomposites. The SEM clearly shows that the (CPAA) is uniform and homogeneous, with tightly connected aggregate layers in shape. However, the amount of TiO2 in the nanocomposites greatly affects their morphology, revealing structural differences and indicating a reaction between (CPAA) and TiO2, especially at a higher concentration of 5% TiO2. A new composite of (CPAA) was introduced and the photocatalytic effect for MB was studied. The removal efficiency of (pure-CPAA) over MB dye under simulated sunlight was 62%. However, (CPAA-TiO2 1%) destroyed 90% of MB dyes. It was discovered that the low band gap of (CPAA-TiO2 1% (2.84 eV)) accelerates high electron-hole recombination, increasing photocatalytic activity.

An electrochemical sensor for the detection of arsenic using nanocomposite-modified electrode

The aim of this research is to develop an electrochemical sensor based on a conducting polymer, polyaniline, and a cationic polymer, poly(diallyldimethylammonium chloride), reinforced with graphene oxide nanosheets functionalized with acrylic acid. The two-dimensional nature of acrylic acid functionalized graphene oxide nanosheets and clusters made of conductive polymers and acrylic acid functionalized graphene oxide nanosheets were confirmed by microscopic tests. The prepared nanocomposite was deposited on the glassy carbon electrode in order to prepare an electrochemical sensor for the detection of arsenic by cyclic voltammetry and differential pulse voltammetry methods. It should be mentioned that the presence of acrylic acid functionalized graphene oxide nanosheets increases the surface area due to the nano size effect and better dispersion of this nanomaterial, poly(diallyldimethylammonium chloride), increases the adsorption capacity of the analyte due to electrostatic interaction between the negatively charged analyte and positively charged surface, and polyanilin increases the charge transfer rate due to the good conductivity. The results show that the prepared electrode has a sensitivity equal to 1.79 A/M with 0.12 μM as the detection limit. The proposed sensor could be used for the determination of total inorganic arsenic by first oxidative pretreatment for conversion of As(III) to As(V).

Advances in Electrochemical Detection Electrodes for As(III)

Arsenic is extremely abundant in the Earth's crust and is one of the most common environmental pollutants in nature. In the natural water environment and surface soil, arsenic exists mainly in the form of trivalent arsenite (As(III)) and pentavalent arsenate (As(V)) ions, and its toxicity can be a serious threat to human health. In order to manage the increasingly serious arsenic pollution in the living environment and maintain a healthy and beautiful ecosystem for human beings, it is urgent to conduct research on an efficient sensing method suitable for the detection of As(III) ions. Electrochemical sensing has the advantages of simple instrumentation, high sensitivity, good selectivity, portability, and the ability to be analyzed on site. This paper reviews various electrode systems developed in recent years based on nanomaterials such as noble metals, bimetals, other metals and their compounds, carbon nano, and biomolecules, with a focus on electrodes modified with noble metal and metal compound nanomaterials, and evaluates their performance for the detection of arsenic. They have great potential for achieving the rapid detection of arsenic due to their excellent sensitivity and strong interference immunity. In addition, this paper discusses the relatively rare application of silicon and its compounds as well as novel polymers in achieving arsenic detection, which provides new ideas for investigating novel nanomaterial sensing. We hope that this review will further advance the research progress of high-performance arsenic sensors based on novel nanomaterials.

Novel biologically active polyurea derivatives and its TiO2-doped nanocomposites

A new series of polyurea derivatives and its nanocomposites were synthesised by the solution polycondensation method through the interaction between 4(2-aminothiazol-4-ylbenzylidene)-4-(tert-butyl) cyclohexanone and diisocyanate compound in pyridine. The PU1-3 structure was confirmed using Fourier transform-infrared (FTIR) spectroscopy and characterised by solubility, viscometry, gel permeation chromatography (GPC), and X-ray diffraction (XRD) analysis. In addition, PU1-3 was evaluated by TGA. Polyurea-TiO2nanocomposites were synthesised using the same technique as that of PU1-3 by adding TiO2 as a nanofiller. The thermal properties of PU2TiO2a-d were evaluated by TGA. Moreover, the morphological properties of a selected sample were examined by SEM and TEM. In addition, PU1-3 and PU2TiO2a-d were examined for antimicrobial activity against certain bacteria and fungi. The PU1-3 showed antibacterial activity against some of the tested bacteria and fungi, as did PU2TiO2a-d, which increased with the increase in TiO2 content. Furthermore, molecular docking studies were displayed against all PU1-3 derivatives against two types of proteins. The results show that the increase in the strength of π-H interactions and H-donors contributed to improved binding of PU2 compared to PU1 andPU3. The docking of 1KZN against the tested polymers suggests an increase in the docking score of PU2, then PU1, and PU3, which is in agreement with the antibacterial study.