Discovery, characterization, and remediation of a C-terminal Fc-extension in proteins expressed in CHO cells

Characterization of mAb size heterogeneity originating from a cysteine to tyrosine substitution using denaturing and native LC-MS

Upon assessing the comparability between a biosimilar mAb and its reference product by non-reducing CE-SDS, increased levels of a heavy-heavy-light chain (HHL) variant, present as a low molecular weight (LMW) peak, were observed. RPLC-MS applied at top, middle-up and bottom-up level revealed the existence of Cys-to-Tyr substitutions, predominantly at position HC226 involved in connecting LC and HC, explaining the abundant HHL levels. Antigen binding was not impacted by the presence of this size variant suggesting a non-covalent association of Tyr substituted HHL and LC. The latter complex is not maintained in the denaturing conditions associated with CE-SDS and RPLC-MS. Its existence could, nevertheless, be confirmed by native SEC-MS which preserves non-covalent protein interactions during separation and electrospray ionization. Amino acid analysis furthermore demonstrated a depletion of Cys during the fed-batch process indicating that the observed size/sequence variant is not of genetic but rather of metabolic origin. Native SEC-MS showed that supplementing the cell culture medium with Cys halts misincorporation of Tyr and promotes the formation of the desired mAb structure. To the best of our knowledge, Cys-to-Tyr substitutions preventing interchain disulfide bridge formation have not been described earlier. This observation adds to the impressive structural heterogeneity reported to date for mAbs.

Interplay of heavy chain introns influences efficient transcript splicing and affects product quality of recombinant biotherapeutic antibodies from CHO cells

Introns are included in genes encoding therapeutic proteins for their well-documented function of boosting expression. However, mis-splicing of introns in recombinant immunoglobulin (IgG) heavy chain (HC) transcripts can produce amino acid sequence product variants. These variants can affect product quality; therefore, purification process optimization may be needed to remove them, or if they cannot be removed, then in-depth characterization must be carried out to understand their effects on biological activity. In this study, HC transgene engineering approaches were investigated and were successful in significantly reducing the previously identified IgG HC splice variants to <0.5%. Subsequently, a comprehensive evaluation was conducted to understand the influence of the different introns in the HC genes on the expression of recombinant biotherapeutic antibodies. The data revealed an unexpected cooperation between specific introns for efficient splicing, where intron retention led to significant reductions in IgG expression of up to 75% for some intron combinations. Furthermore, it was shown that HC introns could be fully removed without significantly affecting productivity. This work paves the way for future biotherapeutic antibody transgene design with regard to inclusion of HC introns. By removing unnecessary introns, transgene mRNA transcript will no longer be mis-spliced, thereby eliminating HC splice variants and improving antibody product quality.

Characterization of light chain c-terminal extension sequence variant in one bispecific antibody

Protein modifications such as post-translational modifications (PTMs) and sequence variants (SVs) occur frequently during protein biosynthesis and have received great attention by biopharma industry and regulatory agencies. In this study, an aberrant peak near light chain (LC) was observed in the non-reduced capillary electrophoresis sodium dodecyl sulfate (nrCE-SDS) electrophoretogram during cell line development of one bispecific antibody (BsAb) product, and the detected mass was about 944 Da higher than LC. The corresponding peak was then enriched by denaturing size-exclusion chromatography (SEC-HPLC) and further characterized by nrCE-SDS and peptide mapping analyses. De novo mass spectra/mass spectra (MS/MS) analysis revealed that the aberrant peak was LC related sequence variant, with the truncated C-terminal sequence “SFNR” (“GEC”deleted) linked with downstream SV40 promotor sequence “EAEAASASELFQ”. The unusual sequence was further confirmed by comparing with the direct synthetic peptide “SFNREAEAASASELFQ”. It was demonstrated by mRNA sequencing of the cell pool that the sequence variant was caused by aberrant splicing at the transcription step. The prepared product containing this extension variant maintained well-folded structure and good functional properties though the LC/Heavy chain (HC) inter-chain disulfide was not formed. Several control strategies to mitigate the risk of this LC related sequence variant were also proposed.

Factors Affecting the Expression of Recombinant Protein and Improvement Strategies in Chinese Hamster Ovary Cells

Recombinant therapeutic proteins (RTPs) are important parts of biopharmaceuticals. Chinese hamster ovary cells (CHO) have become the main cell hosts for the production of most RTPs approved for marketing because of their high-density suspension growth characteristics, and similar human post-translational modification patterns et al. In recent years, many studies have been performed on CHO cell expression systems, and the yields and quality of recombinant protein expression have been greatly improved. However, the expression levels of some proteins are still low or even difficult-to express in CHO cells. It is urgent further to increase the yields and to express successfully the “difficult-to express” protein in CHO cells. The process of recombinant protein expression of is a complex, involving multiple steps such as transcription, translation, folding processing and secretion. In addition, the inherent characteristics of molecular will also affect the production of protein. Here, we reviewed the factors affecting the expression of recombinant protein and improvement strategies in CHO cells.

Enabling development, manufacturing, and regulatory approval of biotherapeutics through advances in mass spectrometry

Rapid technological advances have significantly improved the capability, versatility, and robustness of mass spectrometers which has led to them playing a central role in the development, characterization, and regulatory filings of biopharmaceuticals. Their application spans the entire continuum of drug development, starting with discovery research through product development, characterization, and marketing authorization and continues well into product life cycle management. The scope of application extends beyond traditional protein characterization and includes elements like clone selection, cell culture physiology and bioprocess optimization, investigation support, and process analytical technology. More recently, advances in the MS-based multi-attribute method are enabling the introduction of MS in a cGMP environment for routine release and stability testing. While most applications of MS to date have been for monoclonal antibodies, the successes and learnings should translate to the characterization of next-gen biotherapeutics where modalities like multispecifics could be more prevalent. In this review, we describe the most significant advances in MS and correlate them to the broad spectrum of applications to biotherapeutic development. We anticipate rapid technological improvements to continue that will further accelerate widespread deployment of MS, thereby elevating our overall understanding of product quality and enabling attribute-focused product development.

Denaturing and Native Mass Spectrometric Analytics for Biotherapeutic Drug Discovery Research: Historical, Current, and Future Personal Perspectives

Mass spectrometry (MS) plays a key role throughout all stages of drug development and is now as ubiquitous as other analytical techniques such as surface plasmon resonance, nuclear magnetic resonance, and supercritical fluid chromatography, among others. Herein, we aim to discuss the history of MS, both electrospray and matrix-assisted laser desorption ionization, specifically for the analysis of antibodies, evolving through to denaturing and native-MS analysis of newer biologic moieties such as antibody-drug conjugates, multispecific antibodies, and interfering nucleic acid-based therapies. We discuss challenging therapeutic target characterization such as membrane protein receptors. Importantly, we compare and contrast the MS and hyphenated analytical chromatographic methods used to characterize these therapeutic modalities and targets within biopharmaceutical research and highlight the importance of appropriate MS deconvolution software and its essential contribution to project progression. Finally, we describe emerging applications and MS technologies that are still predominantly within either a development or academic stage of use but are poised to have significant impact on future drug development within the biopharmaceutic industry once matured. The views reflected herein are personal and are not meant to be an exhaustive list of all relevant MS performed within biopharmaceutical research but are what we feel have been historically, are currently, and will be in the future the most impactful for the drug development process.

Fractionated charge variants of biosimilars: A review of separation methods, structural and functional analysis

The similarity between originator and biosimilar monoclonal antibody candidates are rigorously assessed based on primary, secondary, tertiary, quaternary structures, and biological functions. Minor differences in such parameters may alter target-binding, potency, efficacy, or half-life of the molecule. The charge heterogeneity analysis is a prerequisite for all biotherapeutics. Monoclonal antibodies are prone to enzymatic or non-enzymatic structural modifications during or after the production processes, leading to the formation of fragments or aggregates, various glycoforms, oxidized, deamidated, and other degraded residues, reduced Fab region binding activity or altered FcR binding activity. Therefore, the charge variant profiles of the monoclonal antibodies must be regularly and thoroughly evaluated. Comparative structural and functional analysis of physically separated or fractioned charged variants of monoclonal antibodies has gained significant attention in the last few years. The fraction-based charge variant analysis has proved very useful for the biosimilar candidates comprising of unexpected charge isoforms. In this report, the key methods for the physical separation of monoclonal antibody charge variants, structural and functional analyses by liquid chromatography-mass spectrometry, and surface plasmon resonance techniques were reviewed.

Rational selection of building blocks for the assembly of bispecific antibodies

Bispecific antibodies, engineered to recognize two targets simultaneously, demonstrate exceptional clinical potential for the therapeutic intervention of complex diseases. However, these molecules are often composed of multiple polypeptide chains of differing sequences. To meet industrial scale productivity, enforcing the correct quaternary assembly of these chains is critical. Here, we describe Chain Selectivity Assessment (CSA), a high-throughput method to rationally select parental monoclonal antibodies (mAbs) to make bispecific antibodies requiring correct heavy/light chain pairing. By deploying CSA, we have successfully identified mAbs that exhibit a native preference toward cognate chain pairing that enables the production of hetero-IgGs without additional engineering. Furthermore, CSA also identified rare light chains (LCs) that permit positive binding of the non-cognate arm in the common LC hetero-IgGs, also without engineering. This rational selection of parental mAbs with favorable developability characteristics is critical to the successful development of bispecific molecules with optimal manufacturability properties.

Identification and characterization of an IgG sequence variant with an 11 kDa heavy chain C-terminal extension using a combination of mass spectrometry and high-throughput sequencing analysis

Protein primary structure is a potential critical quality attribute for biotherapeutics. Identifying and characterizing any sequence variants present is essential for product development. A sequence variant ~11 kDa larger than the expected IgG mass was observed by size-exclusion chromatography and two-dimensional liquid chromatography coupled with online mass spectrometry. Further characterization indicated that the 11 kDa was added to the heavy chain (HC) Fc domain. Despite the relatively large mass addition, only one unknown peptide was detected by peptide mapping. To decipher the sequence, the transcriptome of the manufacturing cell line was characterized by Illumina RNA-seq. Transcriptome reconstruction detected an aberrant fusion transcript, where the light chain (LC) constant domain sequence was fused to the 3ʹ end of the HC transcript. Translation of this fusion transcript generated an extended peptide sequence at the HC C-terminus corresponding to the observed 11 kDa mass addition. Nanopore-based genome sequencing showed multiple copies of the plasmid had integrated in tandem with one copy missing the 5ʹ end of the plasmid, deleting the LC variable domain. The fusion transcript was due to read-through of the HC terminator sequence into the adjacent partial LC gene and an unexpected splicing event between a cryptic splice-donor site at the 3ʹ end of the HC and the splice acceptor site at the 5ʹ end of the LC constant domain. Our study demonstrates that combining protein physicochemical characterization with genomic and transcriptomic analysis of the manufacturing cell line greatly improves the identification of sequence variants and understanding of the underlying molecular mechanisms.

High sensitivity LC-MS profiling of antibody-drug conjugates with difluoroacetic acid ion pairing

Reversed-phase liquid chromatography (RPLC) separations of proteins using optical detection generally use trifluoroacetic acid (TFA) because it is a strong, hydrophobic acid and a very effective ion-pairing agent for minimizing chromatographic secondary interactions. Conversely and in order to avoid ion suppression, analyses entailing mass spectrometry (MS) detection is often performed with a weaker ion-pairing modifier, like formic acid (FA), but resolution quality may be reduced. To gain both the chromatographic advantages of TFA and the enhanced MS sensitivity of FA, we explored the use of an alternative acid, difluoroacetic acid (DFA). This acid modifier is less acidic and less hydrophobic than TFA and is believed to advantageously affect the surface tension of electrospray droplets. Thus, it is possible to increase MS sensitivity threefold by replacing TFA with DFA. Moreover, we have observed DFA ion pairing to concomitantly produce higher chromatographic resolution than FA and even TFA. For this reason, we prepared and used MS-quality DFA in place of FA and TFA in separations involving IdeS digested, reduced NIST mAb and a proprietary antibody-drug conjugate (ADC), aiming to increase sensitivity, resolution and protein recovery. The resulting method using DFA was qualified and applied to two other ADCs and gave heightened sensitivity, resolution and protein recovery versus analyses using TFA. This new method, based on a purified, trace metal free DFA, can potentially become a state-of-the-art liquid chromatography-MS technique for the deep characterization of ADCs.

Expression vector-derived heterogeneity in a therapeutic IgG4 monoclonal antibody

While characterizing a therapeutic IgG4 monoclonal antibody (mAb), we observed a variant with a mass 1177 Da larger than the predominant mAb form that could not be ascribed to previously described modifications. Through successive rounds of experimentation, we localized the mass addition to the C-terminus of the heavy chain (HC). During this process we observed that when the mAb was broken down into separate domains, the Fc and the 1177 Da-modified Fc could be chromatographically separated. Separation allowed collection of native and modified Fc fractions for LC/MS peptide mapping. A unique peptide present in the modified fraction was de novo sequenced and demonstrated to be a modified form of the HC C-terminus lacking two native residues (GK) and gaining twelve additional non-native residues (EAEAASASELFQ). Aware of other mAb variants with genetic origins, we sought to understand whether this modification too had a genetic basis. In silico translation of the expression vector encoding the mAb demonstrated that a normally non-coding section of nucleotides in the + 1 reading frame relative to the HC C-terminal coding region could have led to a transcript with the non-native C-terminal extension. Two potential mechanisms for how this nucleotide sequence might have fused to the native HC coding region and led to expression of the extension product are presented.