Morphological and physicochemical evaluation of the propranolol HCl–Eudragit® RS100 electrosprayed nanoformulations

Electrosprayed Nanoparticles Containing Hydroalcoholic Extract of Echinacea purpurea (L.) Moench Stimulates Immune System by Increasing Inflammatory Factors in Male Wistar Rats

Purpose: Echinacea purpurea (L.) Moench is a member of the Asteraceae family and is traditionally used mainly due to its immunostimulatory properties. Various compounds including alkylamides and chicoric acid were reported as active ingredients of E. purpurea. Here, we aimed to prepare electrosprayed nanoparticles (NPs) containing hydroalcoholic extract of E. purpurea using Eudragit RS100 (EP-Eudragit RS100 NPs) to improve the immunomodulatory effects of the extract. Methods: The EP-Eudragit RS100 NPs with the different extract:polymer ratios and solution concentrations were prepared using the electrospray technique. The size and morphology of the NPs were evaluated using dynamic light scattering (DLS) and field emission-scanning electron microscopy (FE-SEM). To evaluate the immune responses, male Wistar rats were administrated with the prepared EP-Eudragit RS100 NPs and plain extract in the final dose of 30 or 100 mg/kg. The blood samples of the animals were collected and the inflammatory factors and complete blood count (CBC) were investigated. Results: In vivo studies indicated that the plain extract and EP-Eudragit RS100 NPs (100 mg/kg) significantly increased the serum level of tumor necrosis factor-α (TNF-α) and interleukin 1-β (IL1-β) whereas the EP-Eudragit RS100 NPs (30 mg/kg) significantly increased the number of white blood cells (WBCs) compared to the control group. Lymphocytes' count in all groups was increased significantly compared to the control group (P<0.05) whereas other CBC parameters remained unchanged. Conclusion: The prepared EP-Eudragit RS100 NPs by electrospray technique caused significant reinforcement in the immunostimulatory effects of the extract of E. purpurea.

Development, characterization, and in vitro evaluation of adhesive fibrous mat for mucosal propranolol delivery

This research focuses on the synthesis and adhesive properties of mucoadhesive mats, prepared with poly(vinylic alcohol) as a base polymer for the oromucosal release of propranolol (PRO) by the electrospinning technique. The nanofibers mats were evaluated by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry; in vitro drug entrapment efficiency, degradation time, and adhesion studies were performed. SEM images of the electrospun mats show the correct formation of fibers with a variable diameter and porosity. Thermal studies indicate excellent thermal stability of the scaffolds, The fibrous mats loaded with 10% of the drug exhibit the best thermal stability with decomposition after 450°C. In vitro studies indicate a drug content of 88% loaded in the mats. In the cytotoxicity test, loaded mat presents cell proliferations of 97% and 88% for drug concentrations of 10% an 15%, respectively. To conclude, the formed electrospun adhesive mats exhibited excellent thermal stability, adhesive properties, and drug entrapment efficiency, promising features for a successful drug topical release system on mucosal tissue in the oral cavity.

Production and isolation of pharmaceutical drug nanoparticles

Nanosizing of pharmaceutical drug particles is one of the most important drug delivery platforms approaches for the commercial development of poorly water-soluble drug molecules. Though nanosizing of drug particles has been proven to greatly enhance drugs dissolution rate and apparent solubility, nanosized materials have presented significant challenges for their formulation as solid dosage forms (e.g. tablets, capsules). This is due to the strong Van der Waals attraction forces between dry nanoparticles leading to aggregation, cohesion, and consequently poor flowability. In this review, the broad area of nanomedicines is overviewed with the primary focus on drug nanocrystals and the top-down and bottom-up methods used in their fabrication. The review also looks at how nanosuspensions of pharmaceutical drugs are generated and stabilised, followed by subsequent strategies for isolation of the nanoparticles. A perspective on the future outlook for drug nanocrystals is also presented.

Formulation and Characterization of Acetazolamide/Carvedilol Niosomal Gel for Glaucoma Treatment: In Vitro, and In Vivo Study

Acetazolamide (ACZ) is a diuretic used in glaucoma treatment; it has many side effects. Carvedilol (CAR) is a non-cardioselective beta-blocker used in the treatment of elevated intraocular pressure; it is subjected to the first-pass metabolism and causes fluids accumulation leading to edema. This study focuses on overcoming previous side effects by using a topical formula of a combination of the two previous drugs. Sixty formulations of niosomes containing Span 20, Span 60, Tween 20, and Tween 60 with two different ratios were prepared and characterized. Formulation with the lowest particle size (416.30 ± 0.23), the highest zeta potential (72.04 ± 0.43 mv), and the highest apparent coefficient of corneal permeability (0.02 ± 0.29 cm/h) were selected. The selected formula was incorporated into the gel using factorial design 2³. Niosomes (acetazolamide/carvedilol) consisting of Span 60 and cholesterol in the molar ratio (7:6), HMPC, and carbopol with two different ratios were used. The selected formula was subjected to an in vivo study of intraocular pressure in ocular hypertensive rabbits for 60 h. The sustained gel formula of the combination decreased (IOP) to normal after 1 h and sustained efficacy for 4 days. Histological analysis of rabbit eyeballs treated with the selected formula showed improvement in glaucomatous eye retinal atrophy.

Taste-masked nanoparticles containing Saquinavir for pediatric oral administration

This research has aimed to improve the stability and taste-masking properties by developing nanostructured dosage forms containing Saquinavir. Liquid formulations were developed using Eudragit RS100® and Pullulan as polymers. The physicochemical characteristics, stability, in vitro drug release, morphology, mucoadhesion and taste masking capacity were evaluated. The Saquinavir-nanoparticles had average diameters between 136 and 158 nm, with a Span below 1.4. These formulations presented a drug content above 80%, a high encapsulation efficiency (>97%), slightly acidic pH levels, low dynamic viscosity and controlled drug release. Electron microscopy revealed irregular spherical nanoparticles. The formulations prepared with higher amounts of Eudragit RS100® had greater mucoadhesion. Both polymers were able to improve drug stabilization, taste-masking properties and protection against drug cytotoxicity. The Saquinavir-nanoparticles exhibited stability and control releasing properties, thus making it a promising liquid dosage form with taste-masking properties intended for application in pediatric treatment.

Electrosprayed polymeric nanobeads and nanofibers of modafinil: preparation, characterization, and drug release studies

Introduction: Modafinil (MDF) is used orally for the treatment of attention-deficit/hyperactivity disorder and narcolepsy. It holds low solubility and high permeability; therefore, improving its dissolution properties by preparing nanoformulations can be a promising approach to enhance its oral absorption. Our aims were to prepare and characterize MDF-Eudragit® RS100 (MDF-ERS) nanoparticles by electrospray technique.

Methods: Electrosprayed nanoparticles were fabricated by varying MDF to ERS ratios and concentrations. The formulations were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and Fourier-transform infrared spectroscopy (FTIR). Release studies were performed on nanoparticles, physical mixtures, and raw MDF. The release data were fitted to different models to understand the mechanism of the drug release.

Results: Electrospraying of MDF and ERS solution resulted in the preparation of nonobeads or nanofibers, and the particulate characteristics of the obtained products were largely controlled by the polymer amount in the solution. PXRD and thermal analyses showed that MDF was an amorphous phase in the structures of nanoparticles. Using FTIR, no interaction was observed between MDF and ERS in nanoparticles. Nanoparticles showed biphasic release profiles and the order of dissolution rates was: nanofibers>MDF>nanobeads. The well-fitted model was Weibull model, indicating a Fickian diffusion as the main mechanism of release.

Conclusion: The results suggest that by optimization of variables such as solution concentration of MDF-ERS nanofibers and nanobeads with higher dissolution rates can be made by electrospray. Electrospray deposition as a simple, continuous, and surfactant free method is an excellent choice for preparation of drug loaded polymeric nanoparticles.

Novel Gliclazide Electrosprayed Nano-Solid Dispersions: Physicochemical Characterization and Dissolution Evaluation

Purpose: In the current study, electrospraying was directed as a novel alternative approach to improve the physicochemical attributes of gliclazide (GLC), as a poorly water-soluble drug, by creating nanocrystalline/amorphous solid dispersions (ESSs). Methods: ESSs were formulated using Eudragit® RS100 and polyethylene glycol (PEG) 6000 as polymeric carriers at various drug: polymer ratios (i.e. 1:5 and 1:10) with different total solution concentrations of 10, 15, and 20% w/v. Morphological, physicochemical, and in-vitro release characteristics of the developed formulations were assessed. Furthermore, GLC dissolution behaviors from ESSs were fitted to various models in order to realize the drug release mechanism. Results: Field emission scanning electron microscopy analyses revealed that the size and morphology of the ESSs were affected by the drug: polymer ratios and solution concentrations. The polymer ratio augmentation led to increase in the particle size while the solution concentration enhancement yielded in a fiber establishment. Differential scanning calorimetry and powder X-ray diffraction investigations demonstrated that the ESSs were present in an amorphous state. Furthermore, the in vitro drug release studies depicted that the samples prepared employing PEG 6000 as carrier enhanced the dissolution rate and the model that appropriately fitted the release behavior of ESSs was Weibull model, where demonstrating a Fickian diffusion as the leading release mechanism. Fourier-transform infrared spectroscopy results showed a probability of complexation or hydrogen bonding, development between GLC and the polymers in the solid state. Conclusion: Hence the electrospraying system avails the both nanosizing and amorphization advantages, therefore, it can be efficiently applied to formulating of ESSs of BCS Class II drugs.

Physicochemical and pharmacological evaluation of carvedilol-eudragit® RS100 electrosprayed nanostructures

OBJECTIVES

This study was carried out to boost the pharmacologic influence of carvedilol (CAR) (as a poorly water-soluble drug) by developing CAR-eudragit® RS100 (Eud) nanofibers and nanobeads benefiting an electrospraying approach.

MATERIALS AND METHODS

CAR-Eud nanoformulations with varying ratios (1:5 and 1:10) at total solution concentrations of 10 %, 15 % and 20 % w/v were formulated.

RESULTS

The solution concentration remarkably impressed the size and morphology of the samples; in which, the nanobeads (mean diameter of 135.83 nm) were formed at low solution concentrations and high concentrations led to nanofibers (mean diameter of 193.45 nm) formation. DSC thermographs and PXRD patterns along with FTIR spectrum precisely showed CAR amorphization and no probable chemical interactions between CAR and Eud in the electrosprayed nanosystems. The in vitro release considerations demonstrated that the nanoformulations with the drug: polymer ratios of 1:10 and 1:5 depict rapid dissolution rate compared to the physical mixtures (PMs) and the pure drug. The in vivo studies in Wistar male rats suggested that the electrosprayed nanoformulation (1:10; 20 %) reduced the isoproterenol (ISO) induced elevation of heart rate, necrosis and accumulation of neutrophils in the heart tissue more efficient than the pure drug and PM.

CONCLUSION

Our finding illustrated that the electrospraying as a profitable one-step procedure could be productively benefited to improve the physicochemical features and pharmacologic influences of CAR.

Made-on-demand, complex and personalized 3D-printed drug products

Layer-by-layer fabrication of three dimensional (3D) objects from digital models is called 3D printing. This technology established just about three decades ago at the confluence of materials science, chemistry, robotics, and optics researches to ease the fabrication of UV-cured resin prototypes. The 3D technology was rapidly considered as a standard instrument in the aerospace, automotive, and consumer goods production factories. Nowadays, research interests in the 3D printed products have been raised and achieved ever-increasing traction in the pharmaceutical industry; so that, the first 3D printed drug product was approved by FDA in August 2015. This editorial summarizes the competitive advantages of the 3D printing for the made-on-demand, personalized and complex products, manufacturing of which establish opportunities for enhancing the accessibility, effectiveness, and safety of drugs.

Formulation of sitagliptin-loaded oral polymeric nano scaffold: process parameters evaluation and enhanced anti-diabetic performance

PURPOSE

The aim of the study to formulate and statistically optimize sitagliptin-loaded eudragit nanoparticles (SIT-NPs) and evaluate the in-vitro pharmaceutical quality and in-vivo anti-diabetic assessment.

METHOD

SIT-NPs were prepared by using combination method of solvent evaporation and nano-precipitation techniques. The influence of different independent variables as eudragit RL100 concentration (%), tween 80 concentration (%) and sonication time (min) were evaluated on dependent variables like particle size (nm), drug loading (%) and in-vitro drug release (%). Further, the optimized formulation was evaluated for surface morphology, CLSM, ex-vivo permeation study and in-vivo anti-diabetic activity and stability study.

RESULTS

The developed SIT-NPs formulations showed particle size range (135.86-193.45 nm), drug loading (6.36-8.76%) and prolonged drug release over 24 h. The prepared SIT-NPs were found to be nearly spherical with smooth surface. The comparative in-vitro release study and CLSM study results revealed that SIT-NPopt showed significantly (p < .05) enhanced release and permeation as compared to SIT free solution (SIT-Fs). The in-vivo anti-diabetic assessment revealed that SIT-NPopt able to reduce the blood sugar level (BSL) for a prolonged period of time. Further, the stability study data showed the formulations were found stable at both temperature and having the shelf life of 488 d.

CONCLUSIONS

This research has shown that SIT-NPs based on experimental design offers a new and better approach to delivering SIT, thus encouraging further development of this formulation.