Recent approaches to ameliorate selectivity and sensitivity of enzyme based cholesterol biosensors: a review

Exploring multivalency-driven sensitivity modulation for optimization and fine-tuning of avidity-based biosensors

The development of multivalent nanoprobes has garnered considerable interest due to their enhanced sensitivity and precision in diagnosing and monitoring diverse diseases. Despite significant advances in nanobiotechnology, the optimal density of binding motifs to maximize the diagnostic efficacy of biosensors remains incompletely understood. Herein, we investigate the influence of multivalency in the functional performance of avidity-based biosensors. By post-translationally modifying the surface of M13 bacteriophages, we achieved multivalent displays of epidermal growth factor receptor-specific repebodies and enhanced green fluorescent proteins in a controlled configuration. Through an array of phage-based nanoprobes, our findings reveal an inverted U-shaped correlation between the degree of multivalency and biosensor sensitivity. Briefly, excessive multivalency negatively impacts analytical performance, likely due to irreversible target depletion, while fine-tuned multivalency significantly enhances antigen recognition and signal amplification. Additionally, the advantages of avidity-demonstrated as improved targeting specificity and sensing capability-are especially prominent in nanoprobes incorporating low-affinity repebodies. This work underscores the critical role of multivalency optimization in biosensor design, providing valuable insights for the development of highly sensitive and reliable diagnostic tools in clinical settings.

Innovative Non-Enzymatic Electrochemical Quantification of Cholesterol

The use of the Liebermann–Burchard reaction in this study has been explored in the development of a simple, reliable, and robust quantitative electrochemical method to assay cholesterol, and hence provide a good alternative to colorimetric methods. The optimization of batch mode operation for electrochemical oxidation of cholesterol in the Liebermann–Burchard reagents included the applied potential and acidic volume. Tested using chronoamperometry, the developed method showed a high sensitivity (14.959 μA mM⁻¹) and low detection limit (19.78 nM) over a 0.025–3 mM concentration range, with remarkable linearity (R² = 0.999), proving an analytical performance either higher or comparable to most of the cholesterol sensors discussed in literature. The influence of possible interfering bioactive agents, namely, glucose, uric acid, ascorbic acid, KCl and NaCl, has been evaluated with no or negligible effects on the measurement of cholesterol. Our study was directed at finding a new approach to chemical processing arising from the use of external potential as an additional level of control for chemical reactions and the transfer of electrons between surfaces and molecules. Finally, the optimized method was successfully applied for the determination of cholesterol content in real blood samples.

A sensitive and compact optical detector based on digital lock-in amplification

We report a sensitive, fixed-wavelength, lock-in-based optical detector built from a light-emitting diode, two colour filters, a photodetector, a small number of discrete analogue components, and a low-cost microcontroller development board. We describe the construction, operating principle, use and performance of the optical detector, which may be used for both absorption and fluorescence measurements in either a 10-mm pathlength cuvette or a low-volume (<100 μl) flow-cell. For illustrative purposes the detector is applied here to a cholesterol assay based on the enzyme-mediated conversion of (non-emissive) Amplex Red into the fluorescent dye resorufin, providing a detection limit of ~ 200 nM - some four orders of magnitude lower than the typical concentration of cholesterol in human serum. (The resorufin molecule itself is detectable down to concentrations of ~ 20 nM). The system may be readily adapted to other biomolecules through a simple change of enzyme.

Two-Color Visualization of Cholesterol Fluctuation in Plasma Membranes by Spatial Distribution-Controllable Single Fluorescent Probes

Visualizing cholesterol (CL) fluctuation in plasma membranes is a crucially important yet challenging task in cell biology. Here, we proposed a new imaging strategy based on permeability changes of plasma membranes triggered by different CL contents to result in controllable spatial distribution of single fluorescent probes (SF-probes) in subcellular organelles. Three spatial distribution-controllable SF-probes (PMM-Me, PMM-Et, and PMM-Bu) for imaging CL fluctuation in plasma membranes were rationally developed. These SF-probes target plasma membranes and mitochondria at normal CL levels, while they display solely staining in plasma membranes and mitochondria at increased and decreased CL levels, respectively. These polarity-sensitive probes also show distinct emission colors with fluorescence peaks of 575 and 620 nm in plasma membranes and mitochondria, respectively. Thus, the CL fluctuation in plasma membranes can be clearly visualized by means of the spatially distributed and two-color emissive SF-probes.

An off/on thrombin activated energy driven molecular machine for sensitive detection of human thrombin via non-enzymatic catalyst recycling amplification

In this article, we report a novel dual on/off thrombin fluorescence aptasensor by combining the energy driven target induced strand displacement reaction and a non-enzyme catalyst recycling DNA machine. Firstly, the specific binding of an aptamer strand and thrombin induce the release of a catalyst which was used as a DNA machine trigger. Subsequently, the catalyst as the trigger initiated the DNA machine through nucleic acid hybridization and branch migration of the DNA machine, resulting in the DNA substrate melting and re-hybridization. In such a working model, the DNA machine achieved cooperative control of the circular strand displacement reaction, realizing catalyst recycling and dual-amplification. The fluorescence signal change of FAM and ROX accumulation had a good linear relationship with the thrombin concentration in the range of 1 fM to 1 nM. On account of catalyst recycling and dual recognition, the detection limit for thrombin was determined to be as low as 0.45 fM (S/N = 3).This biosensor also showed good selectivity for thrombin without being affected by some other proteins, such as PSA, lysozyme etc. Moreover, this assay can be applied to the detection of thrombin in diluted human serum.

Recent Development in Nanomaterial-Based Electrochemical Sensors for Cholesterol Detection

Functional nanomaterials have attracted significant attention in a variety of research fields (in particular, in the healthcare system) because of the easily controllable morphology, their high chemical and environmental stability, biocompatibility, and unique optoelectronic and sensing properties. The sensing properties of nanomaterials can be used to detect biomolecules such as cholesterol. Over the past few decades, remarkable progress has been made in the production of cholesterol biosensors that contain nanomaterials as the key component. In this article, various nanomaterials for the electrochemical sensing of cholesterol were reviewed. Cholesterol biosensors are recognized tools in the clinical diagnosis of cardiovascular diseases (CVDs). The function of nanomaterials in cholesterol biosensors were thoroughly discussed. In this study, different pathways for the sensing of cholesterol with functional nanomaterials were investigated.

Simple and Cost-effective Enzymatic Detection of Cholesterol Using Flow Injection Analysis

A flow-injection analytical (FIA) system was developed for the determination of cholesterol concentrations based on enzymatic reactions that occurred in a cholesterol oxidase (CHO_x)-immobilized, fused-silica capillary followed by electrochemical detection. The production of hydrogen peroxide from cholesterol in an enzymatic reaction catalyzed by CHO_x was subsequently oxidized electrochemically at an electrode. Our FlA system demonstrated its cost-effectiveness and utility at an applied potential of 0.6 V (vs. Ag/AgCl), a flow rate of 100 μL/min and, under optimal conditions, the resulting signal demonstrated a linear dynamic range from 50 μM to 1.0 mM with a limit of detection (LOD) of 12.4 μM, limit of quantification (LOQ) of 44.9 μM, and the coefficient of variation of 5.17%. In addition, validation of our proposed system using a reference HDL-cholesterol kit used for clinical diagnosis suggested our FIA system was comparable to commercial kits for the determination of the cholesterol incorporation amount in various aqueous liposomal suspensions. These good analytical features achieved by FIA could make the implementation of this methodology possible for on-line monitoring of cholesterol in various types of samples.

Recent Developments in Printing Flexible and Wearable Sensing Electronics for Healthcare Applications

Wearable biosensors attract significant interest for their capabilities in real-time monitoring of wearers' health status, as well as the surrounding environment. Sensor patches are embedded onto the human epidermis accompanied by data readout and signal conditioning circuits with wireless communication modules for transmitting data to the computing devices. Wearable sensors designed for recognition of various biomarkers in human epidermis fluids, such as glucose, lactate, pH, cholesterol, etc., as well as physiological indicators, i.e., pulse rate, temperature, breath rate, respiration, alcohol, activity monitoring, etc., have potential applications both in medical diagnostics and fitness monitoring. The rapid developments in solution-based nanomaterials offered a promising perspective to the field of wearable sensors by enabling their cost-efficient manufacturing through printing on a wide range of flexible polymeric substrates. This review highlights the latest key developments made in the field of wearable sensors involving advanced nanomaterials, manufacturing processes, substrates, sensor type, sensing mechanism, and readout circuits, and ends with challenges in the future scope of the field. Sensors are categorized as biological and fluidic, mounted directly on the human body, or physiological, integrated onto wearable substrates/gadgets separately for monitoring of human-body-related analytes, as well as external stimuli. Special focus is given to printable materials and sensors, which are key enablers for wearable electronics.

Bifunctional magnetic nanoparticles for efficient cholesterol detection and elimination via host-guest chemistry in real samples

Cholesterol is an essential compound for maintaining cellular homeostasis and human healthy. Sensitive detection of cholesterol and efficient elimination of excess cholesterol have become the essential manipulations in clinical diagnosis and health management. To date, it is still quite challenging that cholesterol detection and elimination tasks are carried out simultaneously. In this study, bifunctional magnetic nanoparticles (Fe₃O₄@PDA-PBA-CD) are designed and fabricated to overcome this difficulty. Taking advantages of competitive host-guest interaction and magnetic separation, highly efficient, reusable and simultaneous cholesterol detection and elimination can be achieved. The limit of detection is determined to be 4.3 nM, which is comparable or even lower than existing methods. The distinguished performance may attribute to the high loading efficiency and magnetic enrichment of nanoparticles. Besides, this efficient strategy is resistant to interfering substances, thus realizing sensitive cholesterol detection in real sample. Simultaneously, the bifunctional magnetic nanoparticles also have up to 95% cholesterol elimination efficiency, which is higher than previous reported methods. Furthermore, the nanoparticles are turned out to be reusable within 5 times without noticeable loss in cholesterol elimination efficiency. Therefore, the bifunctional magnetic nanoparticles fabricated here could hold great potential for simultaneous cholesterol detection and elimination in practical applications.