Formulation of sitagliptin-loaded oral polymeric nano scaffold: process parameters evaluation and enhanced anti-diabetic performance

Design and optimization of acetazolamide nanoparticle-laden contact lens using statistical experimental design for controlled ocular drug delivery

This study aims to formulate and evaluate Eudragit nanoparticles-laden hydrogel contact lenses for controlled delivery of acetazolamide (ACZ) using experimental design. Eudragit S-100 was selected for the preparation of nanoparticles. The optimization of Eudragit S100 concentration (X1), polyvinyl alcohol concentration (X2), and the sonication time (X3) was attempted by applying a central composite experimental design. Mean size of nanoparticles (nm), percent in vitro drug release and drug leaching from the ACZ-ENs laden contact lens were considered as dependent variables. Nanoparticles-laden contact lens was prepared through the direct loading method and characterized. Optimum check-point formulation was selected based on validated quadratic polynomial equations developed using response surface methodology. The optimized formulation of ACZ-ENs exhibited spherical shape with a size of 244.3 nm and a zeta potential of -13.2 mV. The entrapment efficiency of nanoparticles was found to be 82.7 ± 1.21%. Transparent contact lenses loaded ACZ-ENs were successfully prepared using the free radical polymerization technique. ACZ-ENs incorporated in contact lens exhibited a swelling of 83.4 ± 0.82% and transmittance of 80.1 ± 1.23%. ACZ-ENs showed a significantly lower burst release of the drug when incorporated in the contact lens and release was sustained over a period of 24 h. The sterilized formulation of ACZ-ENs laden contact lens did not show any sign of toxicity in rabbit eyes. ACZ-ENs incorporated in contact lens could be considered as a potential alternative in glaucoma patients due to their ability to provide sustained drug release and thus enhance patient compliance.

Fabrication and evaluation of cross-linked nanogels of Dexibuprofen

The objective of this study was to design and develop an Agarose-based polymeric nanogel network system for solubility enhancement of a lipophilic drug, Dexibuprofen. Polymeric nanogels were synthesized through free radical polymerization where Agarose was cross-linked with 2-Acrylamido-2-methylpropane sulfonic acid (AMPS) in the presence of ammonium persulfate (APS) as an initiator and N, N’-Methylenebisacrylamide (MBA) as crosslinking agent. The resulting polymeric nanogels underwent a comprehensive characterization process including Fourier transform infrared (FTIR), particle size analysis, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), powder X-ray diffraction (PXRD), and swelling studies to confirm the preparation of a stable polymeric nanogel system. FTIR spectral findings revealed that Agarose was chemically cross-linked with AMPS and confirmed the successful insertion of AMPS chains on the Agarose backbone. Particle size analysis revealed a diameter of 168 nm with a zeta potential of −9.91 mV, providing assurance of a stable polymeric nanogel system. SEM images depicted a highly porous surface. DSC and TGA results showed a more thermally stable network system than individual ingredients. Swelling studies revealed an increased swelling ratio of polymeric nanogels at phosphate buffer of pH 6.8 than acidic buffer of pH 1.2. Dexibuprofen was efficiently loaded into a polymeric nanogel system with a high entrapment efficiency of up to 80%. The solubility of the drug was enhanced when introduced to a polymeric nanogel formulation when compared to pure drug. The system reproducibility was evaluated through in vitro drug release and kinetic modeling of drug release. Toxicity studies confirmed the formulation’s effectiveness, showcasing the developed polymeric nanogels as a promising option for delivering lipophilic drugs, with outstanding physicochemical properties, improved solubility, and minimal oral toxicity.

The mechanisms of exosomes in diabetic foot ulcers healing: a detailed review

As time goes by, the morbidity of diabetes mellitus continues to rise, and the economic burden of diabetic foot ulcers as a common and serious complication of diabetes is increasing. However, currently there is no unified clinical treatment strategy for this complication, and the therapeutic efficacy is unsatisfactory. Recent studies have revealed that biological effects of exosomes involved in multiple stages of the process of wound closure are similar to source cells. Compared with source cells, exosomes possess lowly immunogenicity, highly stability and easily stored, etc. Accumulating evidence confirmed that exosomes promote diabetic wound healing through various pathways such as promoting angiogenesis, collagen fiber deposition, and inhibiting inflammation. The superior therapeutic efficacy of exosomes in accelerating diabetic cutaneous wound healing has attracted an increasing attention. Notably, the molecular mechanisms of exosomes vary among different sources in the chronic wound closure of diabetes. This review focuses on the specific roles and mechanisms of different cell- or tissue-derived exosomes relevant to wound healing. Additionally, the paper provides an overview of the current pre-clinical and clinical applications of exosomes, illustrates their special advantages in wound repair. Furthermore, we discuss the potential obstacles and various solutions for future research on exosomes in the management of diabetic foot ulcer. The aim is to offer novel insights and approaches for the treatment of diabetic foot ulcer.

Biopolymeric nanocarrier: an auspicious system for oral delivery of insulin

Subcutaneous administration of insulin has been practiced for the clinical supervision of diabetes pathogenesis but it is often ineffective to imitate the glucose homeostasis and is always invasive. Therefore, it causes patient discomfort and infection of local tissue. These issues lead to finding an alternative route for insulin delivery that could be effective, promising, and non-invasive. However, delivery of insulin orally is the most suitable route but the rapid breakdown of insulin by the gastrointestinal enzymes becomes a major barrier to this method. Therefore, nanocarriers (which guard insulin against degradation and facilitate its uptake) are preferred for oral insulin delivery. Among various categories of nanocarriers, bio-polymeric nanocarriers draw special attention owing to their hydrophilic, non-toxic, and biodegradable nature. This review provides a detailed overview of insulin-loaded biopolymer-based nanocarriers, which give future direction in the optimization and development of a clinically functional formulation for their effective and safe delivery.

Development, In-Vitro Characterization and Preclinical Evaluation of Esomeprazole-Encapsulated Proniosomal Formulation for the Enhancement of Anti-Ulcer Activity

Objective: The present study aimed to develop and optimize esomeprazole loaded proniosomes (EZL-PNs) to improve bioavailability and therapeutic efficacy. Method: EZL-PNs formulation was developed by slurry method and optimized by 33 box-Bhekhen statistical design software. Span 60 (surfactant), cholesterol, EZL concentration were taken as independent variables and their effects were evaluated on vesicle size (nm), entrapment efficiency (%, EE) and drug release (%, DR). Furthermore, optimized EZL-PNs (EZL-PNs-opt) formulation was evaluated for ex vivo permeation, pharmacokinetic and ulcer protection activity. Result: The EZL-PNs-opt formulation showed 616 ± 13.21 nm of vesicle size, and 81.21 ± 2.35% of EE. EZL-PNs-opt exhibited negative zeta potential and spherical confirmed scanning electron microscopy. EZL-PNs-opt showed sustained release of EZL (95.07 ± 2.10% in 12 h) than pure EZL dispersion. The ex-vivo gut permeation result exhibited a significantly (p < 0.05) enhanced flux than pure EZL. The in vivo results revealed 4.02-fold enhancement in bioavailability and 61.65% protection in ulcer than pure EZL dispersion (43.82%). Conclusion: Our findings revealed that EZL-PNs formulation could be an alternative delivery system of EZL to enhance oral bioavailability and antiulcer activity.

Polymeric versus lipid nanocapsules for miconazole nitrate enhanced topical delivery: in vitro and ex vivo evaluation

Nanocapsules can be equated to other nanovesicular systems in which a drug is entrapped in a void containing liquid core surrounded by a coat. The objective of the present study was to investigate the potential of polymeric and lipid nanocapsules (LNCs) as innovative carrier systems for miconazole nitrate (MN) topical delivery. Polymeric nanocapsules and LNCs were prepared using emulsification/nanoprecipitation technique where the effect of poly(ε-caprolactone (PCL) and lipid matrix concentrations with respect to MN were assessed. The resulted nanocapsules were examined for their average particle size, zeta potential, %EE, and in vitro drug release. Optimum formulation in both polymeric and lipidic nanocapsules was further subjected to anti-fungal activity and ex vivo permeation tests. Based on the previous results, nanoencapsulation strategy into polymeric and LNCs created formulations of MN with slow biphasic release, high %EE, and improved stability, representing a good approach for the delivery of MN. PNCs were best fitted to Higuchi’s diffusion while LNCs followed Baker and Lonsdale model in release kinetics. The encapsulated MN either in PNCs or LNCs showed higher cell viability in WISH amniotic cells in comparison with free MN. PNCs showed less ex vivo permeation. PNCs were accompanied by high stability and more amount drug deposition (32.2 ± 3.52 µg/cm²) than LNCs (12.7 ± 1.52 µg/cm²). The antifungal activity of the PNCs was high 19.07 mm compared to 11.4 mm for LNCs. In conclusion, PNCs may have an advantage over LNCs by offering dual action for both superficial and deep fungal infections.

High-throughput bioanalysis of sitagliptin in plasma using direct analysis in real time mass spectrometry and its application in the pharmacokinetic study thereof

Sitagliptin is a dipeptidyl peptidase-IV inhibitor for the treatment of type 2 diabetes mellitus. In the present study, a sensitive and high-throughput quantitative method based on the direct analysis in real time tandem mass spectrometry has been developed and validated for the bioanalysis of sitagliptin in rat plasma without chromatographic separation. Sitagliptin and its internal standard retagliptin were detected in positive ion mode by multiple reaction monitoring transitions at m/z 408.2→235.0 and 465.2→260.1, respectively. The method includes a simple solid-phase extraction sample preparation procedure, through which appropriate and reproducible analytical results within the linear concentration range of 20-2000 ng/mL have been achieved. The intra- and interday precisions were <10.6% and the accuracies were ranging from -8.17 to 2.60%. This method has been successfully applied to the pharmacokinetic study of sitagliptin after single intravenous administration in rats. This approach shows considerable promise of direct analysis in real time tandem mass spectrometry method in the high-throughput bioanalysis.

Formulation and characterization of rutin loaded chitosan-alginate nanoparticles: Antidiabetic and cytotoxicity studies

BACKGROUND

The rutin loaded chitosan-alginate nanoparticles (RCANP) were prepared using an ion gelation method. The optimized RCANP4 formulation composed of rutin: alginate: chitosan with the ratio of 1.24:5:2. The particle size, zeta potential, and entrapment efficiency of RCANP4 formulation were found to be 168.4 ± 11.23 nm, -24.7 ± 1.5 mV, and 91.23 ± 1.1%, respectively. The in vitro drug release of RCANP4 formulation was found to be 88.89 ± 2.9% within 24 h. The Fourier transform infrared spectroscopy (FT-IR) of RCANP4 revealed all characteristic groups of rutin, confirming the successful loading of rutin into the nanoparticles. <P> Background: The rutin loaded chitosan-alginate nanoparticles (RCANP) were prepared using an ion gelation method. The optimized RCANP4 formulation composed of rutin: alginate: chitosan with the ratio of 1.24:5:2. The particle size, zeta potential, and entrapment efficiency of RCANP4 formulation were found to be 168.4 ± 11.23 nm, -24.7 ± 1.5 mV, and 91.23 ± 1.1%, respectively. The in vitro drug release of RCANP4 formulation was found to be 88.89 ± 2.9% within 24 h. The Fourier transform infrared spectroscopy (FT-IR) of RCANP4 revealed all characteristic groups of rutin, confirming the successful loading of rutin into the nanoparticles. <P> Results: The results obtained for glucose uptake in HepG2 cells, the RCANP4 caused a significant (P < 0.05) increase in glucose uptake in contrast to rutin. In vitro cytotoxicity results explained that RCANP4 could significantly (P < 0.05) reduce the cells viability rate compared with rutin. It may be due to the internalization of RCANP4 formulations in systemic circulation. <P> Conclusion: The results also showed that RCANP4 could significantly reduce cell viability over 24 h and 48 h compared to free rutin.

Bioadhesive polymer/lipid hybrid nanoparticles as oral delivery system of raloxifene with enhancive intestinal retention and bioavailability

Raloxifene (RLX) is a second-generation selective estrogen receptor modulator used to treat osteoporosis in postmenopausal women. RLX fails to be developed into injectable dosage forms due to poor solubility. Although oral formulations are clinically available, the lower bioavailability (<2%) embarrasses the pharmaceutists. This work reported a bioadhesive nanosystem intended for oral delivery of RLX to enhance its oral bioavailability and address the formulation challenge. The bioadhesive nanosystem refers to polymer-lipid hybrid nanoparticles made up of Carbopol 940, glyceryl distearate, and TGPS. RLX was solidly encapsulated into bioadhesive nanoparticles (bNPs) through a nanoprecipitation technique along with synchronous desalting of RLX·HCl. The resultant RLX-loaded bNPs (RLX-bNPs) were characterized by particle size, ζ potential, morphology, and entrapment efficiency. The in vitro release and in vivo oral bioavailability of RLX-bNPs in rats were comparatively investigated with RLX-loaded common lipid nanoparticles (RLX-cNPs). The preferred formulation possesses a particle size of 150 nm around with a polydispersity index (PDI) of 0.282. RLX-bNPs exhibited slower drug release than RLX-cNPs owing to the presence of an adhesive layer. After oral administration, RLX-bNPs resulted in significant enhancement in the bioavailability of RLX, up to 556.9% relative to RLX suspensions, while it was merely 244.7% for RLX-cNPs. Cellular testing and ex vivo transport imaging demonstrated that bNPs were endowed with excellent intestinal epithelial affinity and absorbability. Our study affords an alternative option for designing a suitable oral delivery system specific to amphiphobic drugs like RLX·HCl.

Effect of Chitosan Coating on PLGA Nanoparticles for Oral Delivery of Thymoquinone: In Vitro, Ex Vivo, and Cancer Cell Line Assessments

In the present study, thymoquinone (TQ)-encapsulated chitosan- (CS)-coated poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles (NPs) were formulated using the emulsion evaporation method. NPs were optimized by using 33-QbD approach for improved efficacy against breast cancer. The optimized thymoquinone loaded chitosan coated Poly (d,l-lactide-co-glycolide) nanoparticles (TQ-CS-PLGA-NPs) were successfully characterized by different in vitro and ex vivo experiments as well as evaluated for cytotoxicity in MDA-MB-231 and MCF-7 cell lines. The surface coating of PLGA-NPs was completed by CS coating and there were no significant changes in particle size and entrapment efficiency (EE) observed. The developed TQ-CS-PLGA-NPs showed particle size, polydispersibility index (PDI), and %EE in the range between 126.03–196.71 nm, 0.118–0.205, and 62.75%–92.17%. The high and prolonged TQ release rate was achieved from TQ-PLGA-NPs and TQ-CS-PLGA-NPs. The optimized TQ-CS-PLGA-NPs showed significantly higher mucoadhesion and intestinal permeation compared to uncoated TQ-PLGA-NPs and TQ suspension. Furthermore, TQ-CS-PLGA-NPs showed statistically enhanced antioxidant potential and cytotoxicity against MDA-MB-231 and MCF-7 cells compared to uncoated TQ-PLGA-NPs and pure TQ. On the basis of the above findings, it may be stated that chitosan-coated TQ-PLGA-NPs represent a great potential for breast cancer management.

Etoposide Amorphous Nanopowder for Improved Oral Bioavailability: Formulation Development, Optimization, in vitro and in vivo Evaluation

Introduction

Etoposide refers to a derivative of podophyllotoxin, which plays an important role in the treatment of cancer due to its prominent anti-tumor effect. As a BCS IV drug, etoposide exhibits insufficient aqueous solubility and permeability, thereby limiting its oral absorption. To enhance the oral bioavailability of etoposide, this study developed an amorphous nanopowder.

Methods

Based on preliminary screening and experimental design, the stabilizer and preparation process of etoposide nanosuspension were explored. Subsequently, using a Box–Behnken design, the effects of independent factors (ultrasonication time, ratio of two phases and stabilizer concentration) on response variables (particle size and polydispersity index) were studied, and then the formulation was optimized. Finally, nanosuspension was further freeze dried with 1% of mannitol resulting in the formation of etoposide amorphous nanopowder.

Results

The optimized etoposide nanopowder showed as spherical particles with an average particle size and polydispersity index of 211.7 ± 10.4 nm and 0.125 ± 0.028. X-ray powder diffraction and differential scanning calorimetry confirmed the ETO in the nanopowder was amorphous. Compared with coarse powder and physical mixture, etoposide nanopowder achieved significantly enhanced saturated solubility and dissolution in various pH environments. The C_max and AUC_0–t of etoposide nanopowder after oral administration in rats were respectively 2.21 and 2.13 times higher than the crude etoposide suspension. Additionally, the T_max value of nanopowder was 0.25 h, compared with 0.5 h of reference group.

Discussion

In the present study, the optimized amorphous nanopowder could significantly facilitate the dissolution and oral absorption of etoposide and might act as an effective delivery method to enhance its oral bioavailability.

Novel thymoquinone lipidic core nanocapsules with anisamide-polymethacrylate shell for colon cancer cells overexpressing sigma receptors

The biggest challenge in colorectal cancer therapy is to avoid intestinal drug absorption before reaching the colon, while focusing on tumor specific delivery with high local concentration and minimal toxicity. In our work, thymoquinone (TQ)-loaded polymeric nanocapsules were prepared using the nanoprecipitation technique using Eudragit S100 as polymeric shell. Conjugation of anisamide as a targeting ligand for sigma receptors overexpressed by colon cancer cells to Eudragit S100 was carried out via carbodiimide coupling reaction, and was confirmed by thin layer chromatography and ¹H-NMR. TQ nanocapsules were characterized for particle size, surface morphology, zeta potential, entrapment efficiency % (EE%), in vitro drug release and physical stability. A cytotoxicity study on three colon cancer cell lines (HT-29, HCT-116, Caco-2) was performed. Results revealed that the polymeric nanocapsules were successfully prepared, and the in vitro characterization showed a suitable size, zeta potential, EE% and physical stability. TQ exhibited a delayed release pattern from the nanocapsules in vitro. Anisamide-targeted TQ nanocapsules showed higher cytotoxicity against HT-29 cells overexpressing sigma receptors compared to their non-targeted counterparts and free TQ after incubation for 48 h, hence delineating anisamide as a promising ligand for active colon cancer targeting.

Formulation and evaluation of thymoquinone niosomes: application of developed and validated RP-HPLC method in delivery system

A rapid, accurate, and sensitive reverse phase high-performance liquid chromatographic (RP-HPLC) method was developed and validated for the estimation of Thymoquinone (TMQ) in API as well as in noisome. The chromatograms were developed with the mobile phase - water: 2-propanol: methanol (50:45:5 v/v/v) as a solvent system at 254 nm. The method was validated as per ICH guidelines for different parameters and the recovery of TMQ was calculated in developed niosomes. Further, TMQ loaded niosomes (TMQNIOS) were prepared and evaluated for different parameters. The optimized TMQNIOS (F3) was further evaluated for surface morphology, in vitro drug release, permeation study, and confocal laser scanning microscopic (CLSM) study. The method showed linearity range between 6.25 and 100 µg/ml with low detection limit and quantitation limit with a value of 2.08 and 6.25 µg/ml. The developed formulations showed the vesicle size and encapsulation efficiency in the range of 157.32 ± 3.15 to 211.44 ± 5.23 nm and 59.32 ± 4.87 to 83.21 ± 3.55%, respectively. The drug release result showed the significant higher release from TMQNIOS in compared to TMQDIS, and the release kinetics data showed Higuchi's equation with highest regression coefficient values. The permeation study and the confocal laser microscopy study further confirmed the enhancement in permeation of TMQ in the intestinal mucosa.

Development and biological evaluation of vesicles containing bile salt of telmisartan for the treatment of diabetic nephropathy

The aim of present study was to develop and evaluate vesicles containing bile salt formulation of telmisartan for the treatment of diabetic nephropathy. Different vesicles containing bile salt formulations were developed by varying ratios of soybean phosphatidylcholine and sodium deoxycholate. Prepared formulations were characterized for their size, polydispersity index, zeta potential, morphology and entrapment efficiency. Further, the renoprotective outcome of optimized formulation was studied in streptozotocin-induced diabetic nephropathy rat model. Results of the present study demonstrated that the average vesicles size, polydispersity index, zeta potential and entrapment efficiency were found to be in the range of 64.98 ± 1.40 to 167.60 ± 6.46 nm, 0.02 ± 0.04 to 0.31 ± 0.01, -24.30 ± 1.39 to -42.60 ± 6.67 mV and 29.68 ± 1.08% to 77.21 ± 0.52%, respectively. Further, the best chosen formulation F4 presented vesicles size, polydispersity index, zeta potential and entrapment efficiency of 64.98 ± 1.40 nm, 0.24 ± 0.02, -35.40 ± 1.48 mV and 77.21 ± 0.52%, respectively. In addition, formulation F4 improved the biological indices in streptozotocin-induced diabetic nephropathy in rats. It was concluded that prepared formulation exerts a valuable results on diabetic nephropathy and it may be a potential pharmaceutical dosage form for the treatment of diabetic nephropathy.