Recent Advances in Probiotic Encapsulation to Improve Viability under Storage and Gastrointestinal Conditions and Their Impact on Functional Food Formulation

Water-soluble microencapsulation using gum Arabic and skim milk enhances viability and efficacy of Pediococcus acidilactici probiotic strains for application in broiler chickens

OBJECTIVE

This study aimed to develop and evaluate the effectiveness of a water-soluble microencapsulation method for probiotic strains using gum Arabic (GA) and skim milk (SKM) over a three-month storage period following processing.

METHODS

Four strains of Pediococcus acidilactici (BYF26, BYF20, BF9, and BF14) that were typical lactic acid bacteria (LAB) isolated from the chicken gut were mixed with different ratios of GA and SKM as coating agents before spray drying at an inlet temperature 140°C. After processing, the survivability and probiotic qualities of the strains were assessed from two weeks to three months of storage at varied temperatures, and de-encapsulation was performed to confirm the soluble properties. Finally, the antibacterial activity of the probiotics was assessed under simulated gastrointestinal conditions.

RESULTS

As shown by scanning electron microscopy, spray-drying produced a spherical, white-yellow powder. The encapsulation efficacy (percent) was greatest for a coating containing a combination of 30% gum Arabic: 30% skim milk (w/v) (GA:SKM30) compared to lower concentrations of the two ingredients (p<0.05). Coating with GA:SKM30 (w/v) significantly enhanced (p<0.05) BYF26 survival under simulated gastrointestinal conditions (pH 2.5 to 3) and maintained higher survival rates compared to non-encapsulated cells under an artificial intestinal juices condition of pH 6. De-encapsulation tests indicated that the encapsulated powder dissolved in water while keeping viable cell counts within the effective range of 106 for 6 hours. In addition, following three months storage at 4°C, microencapsulation of BYF26 in GA:SKM30 maintained both the number of viable cells (p<0.05) and the preparation's antibacterial efficacy against pathogenic bacteria, specifically strains of Salmonella.

CONCLUSION

Our prototype water-soluble probiotic microencapsulation GA:SKM30 effectively maintains LAB characteristics and survival rates, demonstrating its potential for use in preserving probiotic strains that can be used in chickens and potentially in other livestock.

Improvement of Stress Resistance of Microencapsulated Lactobacillus plantarum by Emulsion Electrospinning

Probiotics have become increasingly recognized for their potential health-promoting properties; however, the viability of probiotics can be affected by storage and transportation processes as well as the stressful environment of the human digestive tract, preventing them from achieving effective concentration (107 CFU/mL). In this regard, the embedding technology of probiotics provides an effective protection method. Dextran-based water in water (W/W) emulsion loaded with Lactobacillus plantarum was used as spinning solution to prepare Lactobacillus plantarum-loaded electrospun fibers. The structure of the W/W emulsion and the electrospun fibers was charactered. Lactobacillus plantarum were uniformly embedded in the internal phase of the W/W emulsion and the loading efficiency was 9.70 ± 0.40 log CFU/g. After 240 min digestion in the gastrointestinal tract, and temperature treatment in 65 °C and 72 °C, the loaded probiotics maintained high activity. Even after 5 days of storage in room temperature and 4 °C, the loaded probiotic activity levels remained high, with counts >8 log CFU/g. These results suggest that probiotics encapsulated by emulsion electrospinning could be potentially delivered in a novel food delivery system used in the future food industry.

Encapsulation of Probiotics within Double/Multiple Layer Beads/Carriers: A Concise Review

An increased demand for natural products nowadays most specifically probiotics (PROs) is evident since it comes in conjunction with beneficial health effects for consumers. In this regard, it is well known that encapsulation could positively affect the PROs' viability throughout food manufacturing and long-term storage. This paper aims to analyze and review various double/multilayer strategies for encapsulation of PROs. Double-layer encapsulation of PROs by electrohydrodynamic atomization or electrospraying technology has been reported along with layer-by-layer assembly and water-in-oil-in-water (W1/O/W2) double emulsions to produce multilayer PROs-loaded carriers. Finally, their applications in food products are presented. The resistance and viability of loaded PROs to mechanical damage, during gastrointestinal transit and shelf life of these trapping systems, are also described. The PROs encapsulation in double- and multiple-layer coatings combined with other technologies can be examined to increase the opportunities for new functional products with amended functionalities opening a novel horizon in food technology.

The application of encapsulation technology in the food Industry: Classifications, recent Advances, and perspectives

Encapsulation technology has been extensively used to enhance the stability, specificity, and bioavailability of essential food ingredients. Additionally, it plays a vital role in improving product quality and reducing production costs. This study presents a comprehensive classification of encapsulation techniques based on the state of different cores (solid, liquid, and gaseous) and offers a detailed description and analysis of these encapsulation methods. Specifically, it introduces the diverse applications of encapsulation technology in food, encompassing areas such as antioxidant, protein activity, physical stability, controlled release, delivery, antibacterial, and probiotics. The potential impact of encapsulation technology is expected to make encapsulation technology a major process and research hotspot in the food industry. Future research directions include applications of encapsulation for enzymes, microencapsulation of biosensors, and novel technologies such as self-assembly. This study provides a valuable theoretical reference for the in-depth research and wide application of encapsulation technology in the food industry.

Probing the microbial diversity and probiotic candidates from Pakistani foods: isolation, characterization, and functional profiling

Probiotics represent beneficial living microorganisms that confer physiological, nutritional, and functional advantages to human health, holding significant potential for development of functional foods. This research aimed to isolate, identify, and characterize potential probiotic bacterial strains sourced from fermented and non-fermented foods from Pakistan. A total of 341 bacterial strains were isolated from diverse food samples (81) collected from various regions of Pakistan. Strains were identified using 16S rRNA gene sequencing and phylogenetic analysis. The identified strains belonged to genera Bacillus, Staphylococcus, Microbacterium, Shigella, Micrococcus, Enterococcus, Sporosarcina, Paenibacillus, Limosilactobacillus, Kosakonia, Dietzia, Leclercia, Lacticaseibacillus, Levilactobacillus, Kluyvera, Providencia, Enterobacter, Neisseria, Streptococcus, Acinetobacter, Corynebacterium, Pantoea, Mammaliicoccus, Pseudomonas, Burkholderia, and Alkalihalobacillus. Selected strains were chosen for probiotic assessment, employing existing literature as a guideline. Among these selections, six strains exhibited hemolytic activity, and seven strains displayed resistance to multiple antibiotics, prompting their exclusion from subsequent evaluations. The remaining strains demonstrated auto-aggregation capacities spanning 3.39-79.7%, and displayed coaggregation capabilities with reported food-borne pathogens. Furthermore, nine strains exhibited antimicrobial properties against food-borne pathogens. The assessment encompassed diverse characteristics such as cell surface hydrophobicity, survival rates under varying conditions, cholesterol reduction ability, casein digestion capability, and antioxidant activity. Phylogenomic analysis, digital-DNA DNA hybridization (digi-DDH), and average nucleotide identity (ANI) calculations unveiled novel species potentially belonging to the genera Sporosarcina and Dietzia. Based on these findings, we advocate for the consideration of Staphylococcus cohnii subsp. cohnii NCCP-2414, Lacticaseibacillus rhamnosus NCCP-2569 and Levilactobacillus brevis NCCP-2574 as prime probiotic candidates with the potential for integration into formulation of functional foods.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03903-6.

Application of Encapsulation Strategies for Probiotics: From Individual Loading to Co-Encapsulation

Consumers are increasingly showing a preference for foods whose nutritional and therapeutic value has been enhanced. Probiotics are live microorganisms, and their existence is associated with a number of positive effects in humans, as there are many and well-documented studies related to gut microbiota balance, the regulation of the immune system, and the maintenance of the intestinal mucosal barrier. Hence, probiotics are widely preferred by consumers, causing an increase in the corresponding food sector. As a consequence of this preference, food industries and those involved in food production are strongly interested in the occurrence of probiotics in food, as they have proven beneficial effects on human health when they exist in appropriate quantities. Encapsulation technology is a promising technique that aims to preserve probiotics by integrating them with other materials in order to ensure and improve their effectiveness. Encapsulated probiotics also show increased stability and survival in various stages related to their processing, storage, and gastrointestinal transit. This review focuses on the applications of encapsulation technology in probiotics in sustainable food production, including controlled release mechanisms and encapsulation techniques.

Delivery Strategies of Probiotics from Nano- and Microparticles: Trends in the Treatment of Inflammatory Bowel Disease-An Overview

Inflammatory bowel disease (IBD) is a chronic inflammatory disorder, most known as ulcerative colitis (UC) and Crohn's disease (CD), that affects the gastrointestinal tract (GIT), causing considerable symptoms to millions of people around the world. Conventional therapeutic strategies have limitations and side effects, prompting the exploration of innovative approaches. Probiotics, known for their potential to restore gut homeostasis, have emerged as promising candidates for IBD management. Probiotics have been shown to minimize disease symptoms, particularly in patients affected by UC, opening important opportunities to better treat this disease. However, they exhibit limitations in terms of stability and targeted delivery. As several studies demonstrate, the encapsulation of the probiotics, as well as the synthetic drug, into micro- and nanoparticles of organic materials offers great potential to solve this problem. They resist the harsh conditions of the upper GIT portions and, thus, protect the probiotic and drug inside, allowing for the delivery of adequate amounts directly into the colon. An overview of UC and CD, the benefits of the use of probiotics, and the potential of micro- and nanoencapsulation technologies to improve IBD treatment are presented. This review sheds light on the remarkable potential of nano- and microparticles loaded with probiotics as a novel and efficient strategy for managing IBD. Nonetheless, further investigations and clinical trials are warranted to validate their long-term safety and efficacy, paving the way for a new era in IBD therapeutics.

Gum Arabic/Chitosan Coacervates for Encapsulation and Protection of Lacticaseibacillus rhamnosus in Storage and Gastrointestinal Environments

Probiotics, such as Lacticaseibacillus rhamnosus, are essential to the food industry for their health benefits to the host. The Lcb. rhamnosus strain is susceptible to processing, gastrointestinal, and storage conditions. In this study, Lcb. rhamnosus strains were encapsulated by complex coacervation in a gum arabic/chitosan or gum arabic/trehalose/chitosan and cross-linked with sodium tripolyphosphate. The physicochemical properties (zeta potential, water activity, water content, and hygroscopicity), encapsulation efficiency, and probiotic survival under storage conditions and simulated gastrointestinal fluids were evaluated. The results showed that crosslinking improves the encapsulation efficiency after drying; however, this result was remarkable when trehalose was used as a cryoprotectant. Furthermore, the encapsulation matrix preserved the viability of probiotics during 12 weeks with probiotic counts between 8.7-9.5, 7.5-9.0, and 5.2-7.4 log10 CFU g-1 at -20, 4, and 20 °C, respectively. After 12 days of digestion in an ex vivo simulator, acetic, butyric, propionic, and lactic acid production changed significantly, compared to free probiotic samples. This work shows that encapsulation by complex coacervation can promote the stability of probiotic bacteria in storage conditions and improve the viability of Lcb. rhamnosus HN001 during consumption so that they can exert their beneficial action in the organism.

Soy lecithin increases the stability and lipolysis of encapsulated algal oil and probiotics complex coacervates

BACKGROUND

Co-encapsulation of probiotics and omega-3 oil using complex coacervation is an effective method for enhancing the tolerance of probiotics under adverse conditions, whereas complex coacervation of omega-3 oil was found to have low lipid digestibility. In the present study, gelatin (GE, 30 g kg^-1 ) and gum arabic (GA, 30 g kg^-1 ) were used to encapsulate Lactobacillus plantarum WCFS1 and algal oil by complex coacervation to produce microcapsules containing probiotics (GE-P-GA) and co-microcapsules containing probiotics and algal oil (GE-P-O-GA), and soy lecithin (SL) was added to probiotics-algal oil complex coacervates [GE-P-O(SL)-GA] to enhance its stability and lipolysis. Then, we evaluated the viability of different microencapsulated probiotics exposed to freeze-drying and long-term storage, as well as the survival rate and release performance of encapsulated probiotics and algal oil during in vitro digestion.

RESULTS

GE-P-O(SL)-GA had a smaller particle size (51.20 μm), as well as higher freeze-drying survival (90.06%) of probiotics and encapsulation efficiency of algal oil (75.74%). Moreover, GE-P-O(SL)-GA showed a higher algal oil release rate (79.54%), lipolysis degree (74.63%) and docosahexaenoic acid lipolysis efficiency (64.8%) in the in vitro digestion model. The viability of microencapsulated probiotics after simulated digestion and long-term storage at -18,4 and 25 °C was in the order: GE-P-O(SL)-GA > GE-P-O-GA > GE-P-GA.

CONCLUSION

As a result of its amphiphilic properties, SL strongly affected the physicochemical properties of probiotics and algal oil complex coacervates, resulting in higher stability and more effective lipolysis. Thus, the GE-P-O(SL)-GA can more effectively deliver probiotics and docosahexaenoic acid to the intestine, which provides a reference for the preparation of high-viability and high-lipolysis probiotics-algal oil microcapsules. © 2022 Society of Chemical Industry.

Enhanced quorum sensing capacity via regulating microenvironment to facilitate stress resistance of probiotic in alginate-based microcapsules

Alginate-based microcapsule has becoming a promising carrier for probiotic encapsulation due to the improved stress resistant ability. Besides the physical protection of microcapsules, bacterial quorum sensing (QS) is another prominent factor affecting microbial stress resistance in microcapsules. In the present study, Vibrio harveyi cells were entrapped and proliferated into cell aggregates in alginate-based microcapsules. The microenvironment composed of cells and biomacromolecules was regulated by the diameter, alginate concentration and core state of microcapsule. Then the effect of microenvironment on bacterial QS capacity was investigated, including bioluminescence, autoinducers (AIs) production and QS related genes expression. The highest diameter of 1200 μm and highest alginate concentration of 2.0 % w/v under the investigation range presented strongest QS capacity, and the maintenance of hydrogel core could enhance bacterial QS. Moreover, the mechanism analysis revealed that the formed biofilm on the surface of cell aggregates hampered the outward transfer of AIs, and the local AIs inside the cell aggregates induced stronger bacteria QS by close-range interaction. As a whole, these findings are helpful to guide the technological development and optimization of microencapsulated probiotics with stronger stress resistance, and the potential application in food, dairy, wastewater treatment and biosensor.

Effect of Chitosan Coating for Efficient Encapsulation and Improved Stability under Loading Preparation and Storage Conditions of Bacillus Lipopeptides

This study aims to evaluate the effect of chitosan coating on the formation and properties of Bacillus cyclic lipopeptide (CLP)-loaded liposomes. A nanoencapsulation strategy for a chitosan-coated liposomal system using lecithin phospholipids for the entrapment of antibiotic CLP prepared from Bacillus subtilis KB21 was developed. The produced chitosan-coated CLP liposome had mean size in the range of 118.47-121.67 nm. Transmission electron microscopy showed the spherical-shaped vesicles. Fourier transform infrared spectroscopy findings indicated the successful coating of the produced CLP-loaded liposomes by the used chitosan. Liposomes coated with 0.2% and 0.5% chitosan concentration decreased the surface tension by 7.3-12.1%, respectively, and increased the CLP content by 15.1-27.0%, respectively, compared to the uncoating liposomes. The coated concentration of chitosan influenced their CLP loading encapsulation efficiency and release kinetics. The physicochemical results of the dynamic light scattering, CLP capture efficiency and long-term storage capacity of nanocapsules increased with chitosan coating concentration. Furthermore, the chitosan-coated liposomes exhibited a significant enhancement in the stability of CLP loading liposomes. These results may suggest the potential application of chitosan-coated liposomes as a carrier of antibiotics in the development of the functional platform.

Preparation and Characteristics of Alginate Microparticles for Food, Pharmaceutical and Cosmetic Applications

Alginates are the most widely used natural polymers in the pharmaceutical, food and cosmetic industries. Usually, they are applied as a thickening, gel-forming and stabilizing agent. Moreover, the alginate-based formulations such as matrices, membranes, nanospheres or microcapsules are often used as delivery systems. Alginate microparticles (AMP) are biocompatible, biodegradable and nontoxic carriers, applied to encapsulate hydrophilic active substances, including probiotics. Here, we report the methods most frequently used for AMP production and encapsulation of different actives. The technological parameters important in the process of AMP preparation, such as alginate concentration, the type and concentration of other reagents (cross-linking agents, oils, emulsifiers and pH regulators), agitation speed or cross-linking time, are reviewed. Furthermore, the advantages and disadvantages of alginate microparticles as delivery systems are discussed, and an overview of the active ingredients enclosed in the alginate carriers are presented.

Polyelectrolytes-stabilized liposomes for efficient encapsulation of Lactobacillus rhamnosus and improvement of its survivability under adverse conditions

To improve the survivability of Lactobacillus rhamnosus probiotics, nanoliposomes (NLs) coated with chitosan (CH)-gelatin (GE) polyelectrolytes have been synthesized and characterized. The produced CH-GE-coated NLs containing L. rhamnosus had mean sizes in the range of 134.8-495.8 nm. HRTEM showed the smooth spherical shape of the vesicles. ATR-FTIR findings indicated the successful coating of the produced NLs by the used CH-GE polyelectrolytes. According to DSC results, CH-GE polyelectrolytes desorption on the surface of NLs altered the physical characteristics of the phospholipid bilayers. Here, an increase in the melting temperature (T_m) from 119.9 to 127.5 °C in L. rhamnosus-loaded CH-GE-coated NLs made this system more stable than uncoated liposomes. Furthermore, the CH-GE coated nanoparticles loaded with L. rhamnosus exhibited a significant enhancement in the viability of cells under simulated gastrointestinal fluids (SGF/SIF). These results may guide the potential application of polyelectrolytes-coated NLs as a carrier of probiotic cells in functional food development.