The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor

Lignin is a promising resource for the sustainable production of platform chemicals and biofuels. The paper industry produces large quantities of lignin every year, mostly dissolved in a black liquor. With the help of hydrothermal liquefaction, black liquor can be used directly as a feedstock to depolymerize the lignin to desired products. However, because various cooking chemicals (e.g., NaHS, NaOH) used in the Kraft process, dominant in the paper industry, are also dissolved in the black liquor, it is necessary to study in detail their influence on the process as well as their fate. In this work, the focus was on the fate of sulfur and the influence of sulfide (HS-). For this purpose, hydrothermal liquefaction experiments (250-400 °C) were carried out with black liquor and self-prepared model black liquor with different sulfide concentrations (0-3 g·L-1 HS-) in batch reactors (V = 25 mL), and the products were analyzed to understand the chemical pathways involving sulfur. It was found that the inorganic sulfur compounds react with organic matter to produce organic sulfur compounds. Dimethyl sulfide is the most abundant of these products. The HS- concentration correlates with the amount of dimethyl sulfide produced. Because methanethiol has also been qualitatively detected, the reaction mechanism of Karnofski et al. for the formation of dimethyl sulfide in the Kraft process also applies to the hydrothermal liquefaction of black liquor. Increased sulfide concentration in the feed leads to an accelerated depolymerization of lignin. In contrast, the yields of some aromatic monomers decrease slightly, possibly as a result of repolymerization reactions also occurring more quickly.

A set up of a modern analytical laboratory for wastewaters from pulp and paper industry

The introduction of analytical techniques allowing rapid, selective, sensitive, and reliable determination of aqueous pollutants is of crucial importance for the protection of the environment. This critical review summarizes the advanced analytical techniques suggested over the last ten years together with already established methods, and evaluates whether they are fit for wastewater quality assessment considering the area of application, interferences, limit of detection, calibration function, and precision. The key parameters of wastewater quality assessment are: total organic carbon (TOC), chemical oxygen demand (COD), biochemical oxygen demand (BOD), organochlorines (AOX), nitrogen, phosphorus, sulfur, and toxicity. Chromatography and capillary electrophoresis, photocatalytic oxidation with semiconductor nanofilms and atomic emission spectrometry, optical fibre sensors and chemiluminescence, amperometric mediated biosensors and microbial fuel cells, respirometry and bioluminescence measurements are just part of the proposed wastewater analyst's toolkit. The diversity of fundamental phenomena and the captivating elegance of interdisciplinary applications involved in the development of wastewater analytical techniques should attract the interest of a wide scientific audience including analytical chemists, chemical physicists, microbiologists and environmentalists. To conclude, we suggest a laboratory set up for the analysis of wastewaters from the pulp and paper industry.

Stabilization of sulfide and sulfite and ion-pair chromatography of mixtures of sulfide, sulfite, sulfate and thiosulfate

Ion chromatography of sulfide, sulfite, sulfate and thiosulfate in a mixture is often difficult because of instability of sulfide and sulfite, poor separation of sulfide from common anions such as bromide or nitrate and similar elution-times for sulfite and sulfate. An ion-pair chromatographic method for the determination of these sulfur anions has been established by stoichiometric conversion of sulfide and sulfite into stable thiocyanate and sulfate, respectively, prior to the chromatographic run. Sulfate, thiosulfate and thiocyanate were resolved on an octadecylsilica column with an acetonitrile-water mobile phase containing tetrapropylammonium salt (TPA) as an ion-paring reagent, and thiosulfate and thiocyanate in the effluent could be measured with a photometric detector (220 nm) and sulfate with a suppressed conductivity detector. When an acetonitrile-water (6:94, v/v) mobile phase (pH 5.0) containing 15 mM TPA and small amounts of acetic acid was used at a flow-rate of 0.6 ml min(-1), the three anions could be eluted within 32 min. Calibration plots of peak height versus concentration for sulfide (detected as thiocyanate) and thiosulfate gave straight lines up to 35 and 60 microM, respectively. The calibration plot for sulfide coincided with that obtained by using thiocyanate. A calibration plot for sulfite, measured as sulfate, was also linear up to 135 microM and was in accord with that of sulfate. Each calibration plot gave a correlation coefficient greater than 0.999. For six replicates obtained for a mixture of 30.0 microM sulfide, 50.0 microM sulfite, 50.0 microM sulfate and 20.0 microM thiosulfate, the proposed method gave a mean value of 30.1 microM with a standard deviation (SD) of 0.77 microM and a relative standard deviation (RSD) of 2.6% for sulfide, 101 microM (SD = 3.5 microM, RSD = 3.5%) for the total of sulfite and sulfate and 20.1 microM (SD = 0.44 microM, RSD = 2.2%) for thiosulfate. Recoveries for sulfide, sulfite plus sulfate, and thiosulfate in hot-spring water samples using the proposed method were found to be quantitative.