Utilization of a novel PVC- optical sensor for high sensitive and selective determination of zinc ion in real samples

A novel and highly specific bulk membrane optode was developed for the ultra-sensitive detection of zinc(II) in biological, pharmaceutical, and water samples. The polymer inclusion membrane (PIM) utilized in this study consists of 50% polyvinyl chloride (PVC) as a base polymer, 9.00% DOP (dioctylphthalate) as the plasticizer, and 40.0% D2EHPA (di(2-ethlyhexyl)phosphoric acid) as the carrier. To facilitate the spectrophotometric determination of zinc(II), a colorimetric reagent, namely 4-(2-arsonophenylazo) salicylic acid (APASA) {1.00%, m/v}, was employed. When Zn(II) was extracted into the PIM, it led to the creation of the zinc-D2EHPA complex. This complex then underwent a reaction with APASA, resulting in the formation of a red Zn - APASA complex with a maximum absorption wavelength (λmax) of 558 nm. To optimize the response of the optode, a central composite design was employed, considering variables such as the amount of additive and reagent, response time, and pH. When operated under the specific optimal conditions, the sensor demonstrated a limit of quantification (LOQ) of 0.74 ng/mL (equivalent to 1.17 × 10-8 M) and a limit of detection (LOD) of 0.22 ng/mL (equivalent to 3.44 × 10-9 M). The optode membrane demonstrated excellent reproducibility, stability, and a relatively long lifespan, making it suitable for precise and accurate monitoring of Zn(II) ion content. Regeneration of the optode was achieved effectively using 0.25 nitric acid solution, and its response exhibited reversibility and reproducibility, showed a relative standard deviation of less than 1.33%. Moreover, the PIM-APASA optode exhibited a high level of effectiveness in accurately determining the presence of Zn(II) ions in real environmental samples.

Selective and sensitive extractive spectrophotometric determination of micro amounts of palladium(II) in spiked samples: using a new reagent N-ethyl-3-carbazolecarbaxaledehydethiosemicarbazone

N-Ethyl-3-cabazolecarboxaldehydethiosemicarbazone (ECCT) is proposed as a new, sensitive and selective complexing reagent for the separation and extractive spectrophotometric determination of palladium(II) at pH: 4.0 to form a yellowish orange colored 1:1 chelate complex, which is very well extracted in to n-butanol. The absorbance was measured at a maximum wavelength, 410 nm. This method obeys Beer's law in the concentration range 0.0-6.6 microg mL(-1) and the correlation coefficient of Pd(II)-ECCT complex is 0.998, which indicates an excellent linearity between the two variables with good molar absorptivity and Sandell's sensitivity, 1.647 x 10(4) l mol(-1)cm(-1), 6.49 x 10(-3) microg cm(-2), respectively. The instability constant of complex calculated from Edmond's method, 2.724 x 10(-5) was in good agreement with the value calculated from Asmus' method 2.624 x 10(-5), at room temperature. The precision and accuracy of the method is checked with calculation of relative standard deviation (n = 5), 0.839. Edmond's method was observed to be a more selective method in the presence of EDTA, oxalate and phosphate ions. The method was successfully applied for the determination of Pd(II) in water samples, synthetic mixtures and hydrogenation catalysts, employing an atomic absorption spectrometer for comparing these results.