Fundamental Limitation in Electrochemical Methane Oxidation to Alcohol: A Review and Theoretical Perspective on Overcoming It

The direct conversion of gaseous methane to energy-dense liquid derivatives such as methanol and ethanol is of profound importance for the more efficient utilization of natural gas. However, the thermo-catalytic partial oxidation of this simple alkane has been a significant challenge due to the high C-H bond energy. Exploiting electrocatalysis for methane activation via active oxygen species generated on the catalyst surface through electrochemical water oxidation is generally considered as economically viable and environmentally benign compared to energy-intensive thermo-catalysis. Despite recent progress in electrochemical methane oxidation to alcohol, the competing oxygen evolution reaction (OER) still impedes achieving high faradaic efficiency and product selectivity. In this review, an overview of current progress in electrochemical methane oxidation, focusing on mechanistic insights on methane activation, catalyst design principles based on descriptors, and the effect of reaction conditions on catalytic performance are provided. Mechanistic requirements for high methanol selectivity, and limitations of using water as the oxidant are discussed, and present the perspective on how to overcome these limitations by employing carbonate ions as the oxidant.

Reactivity of Group 5 and 6 Single-Site Photocatalysts for Partial Oxidation of Methane: Comparison of Chromium, Niobium, and Tungsten-Doped Mesoporous Amorphous Silica

Single-site transition-metal-doped photocatalysts can potentially be used for partial oxidation of methane (POM) at remote sites where natural gas is extracted and methane is often flared or released to the atmosphere. While there have been several investigations into the performance of vanadium, there has been no general survey of the performance of other metals. This work aims and examines Cr, Nb, and W metal oxide materials embedded in amorphous SiO2 to determine the viability of each metal in catalyzing the POM. Photoexcited states are examined to determine the nature of the photoactivated species, and then the subsequent POM reaction mechanisms are elucidated. Using the calculated energies of reaction intermediates and transition states, the rate of methanol formation is evaluated through the use of a microkinetic model. The findings indicate that all three metals are potentially more suitable for catalyzing POM than vanadium but that niobium shows the most favorable energy profile.

Theoretical study of water-assisted reaction between methane and nitrosonium cation

The water-assisted reaction between CH4 and NO+ has been studied employing post Hartree–Fock and density functional theory methods. Two reaction pathways were considered: (i) a frontside NO+ attack on the C–H bond of methane with retention of configuration and (ii) a backside attack with inversion of configuration. The first pathway leads to a thermodynamically more favorable hydrate of N-protonated nitrosomethane, and the second one leads to its O-protonated isomer. The catalytic effect of a single water molecule is expressed in decreasing the activation energy for the elementary step by about a factor of two for the frontside mechanism and by a factor of four to five for the backside one when compared with the calculated literature data on water-free methane nitrosation. The combination of the activation strain model of reactivity and the energy decomposition analysis reveals that the activation barriers are largely determined by the relative stability of the termolecular reactant complexes. The crucial factor that stabilizes these complexes comes from the electrostatic attraction. The catalytic effect of the key water molecule is decreased with introduction of additional one or two explicit water molecules, which form a coordinate O→N bonding with NO+. On the contrary, an additional water molecule hydrogen bonded to the key catalytic water molecule enhances the catalytic effect.

Effect of Ni content in PdNi/C anode catalysts on power and methanol co-generation in alkaline direct methane fuel cell type

PdNi electrocatalysts supported on carbon were used as anode materials for methane oxidation in alkaline direct methane fuel cells (ADMEFCs). The electrocatalysts were successfully synthesized by the NaBH₄ reduction method. X-ray diffraction measurements showed the formation of non-alloyed Pd in the face- centered cubic (FCC) structure for all materials and formation of NiO and Ni(OH)₂ species. TEM images showed that the metal particles are well dispersed on the support with small agglomeration regions. Information about the surface structure of the catalyst were obtained by Raman spectra, mainly confirming the presence of Ni(OH)₂. The species observed by DEMS, that is, methanol (m/z = 32), CO₂ (m/z = 44) and potassium formate (m/z = 84) were confirmed by FTIR, which also showed the presence of a high amount of carbonate in the methane oxidation products of the ADMEFC with Pd₅₀Ni₅₀/C as the anode catalyst. Tests in ADMEFCs showed that the dependence of the maximum power density on nickel content in the catalysts goes through a maximum value of 13.5 μW cm^-2 at 50 at% Ni. Moreover, the amount of produced methanol decreases with increasing Ni content in the PdNi/C catalysts. Both these results can be explained by the enhanced methanol oxidation in the presence of nickel.

Computational mechanistic study of the unimolecular dissociation of ethyl hydroperoxide and its bimolecular reactions with atmospheric species

A detailed computational study of the atmospheric reaction of the simplest Criegee intermediate CH₂OO with methane has been performed using the density functional theory (DFT) method and high-level calculations. Solvation models were utilized to address the effect of water molecules on prominent reaction steps and their associated energies. The structures of all proposed mechanisms were optimized using B3LYP functional with several basis sets: 6-31G(d), 6-31G (2df,p), 6-311++G(3df,3pd) and at M06-2X/6-31G(d) and APFD/6-31G(d) levels of theory. Furthermore, all structures were optimized at the B3LYP/6-311++G(3df,3pd) level of theory. The intrinsic reaction coordinate (IRC) analysis was performed for characterizing the transition states on the potential energy surfaces. Fifteen different mechanistic pathways were studied for the reaction of Criegee intermediate with methane. Both thermodynamic functions (ΔH and ΔG), and activation parameters (activation energies E_a, enthalpies of activation ΔH^ǂ, and Gibbs energies of activation ΔG^ǂ) were calculated for all pathways investigated. The individual mechanisms for pathways A1, A2, B1, and B2, comprise two key steps: (i) the formation of ethyl hydroperoxide (EHP) accompanying with the hydrogen transfer from the alkanes to the terminal oxygen atom of CIs, and (ii) a following unimolecular dissociation of EHP. Pathways from C1 → H1 involve the bimolecular reaction of EHP with different atmospheric species. The photochemical reaction of methane with EHP (pathway E1) was found to be the most plausible reaction mechanism, exhibiting an overall activation energy of 7 kJ mol⁻¹, which was estimated in vacuum at the B3LYP/6-311++G(3df,3pd) level of theory. All of the reactions were found to be strongly exothermic, expect the case of the sulfur dioxide-involved pathway that is predicted to be endothermic. The solvent effect plays an important role in the reaction of EHP with ammonia (pathway F1). Compared with the gas phase reaction, the overall activation energy for the solution phase reaction is decreased by 162 and 140 kJ mol⁻¹ according to calculations done with the SMD and PCM solvation models, respectively.

The Combination of Hydrogen and Methanol Production through Artificial Photosynthesis-Are We Ready Yet?

Because 100 % quantum efficiency for the photosynthetic production of H₂ from H₂ O under visible illumination has been achieved recently, the oxidation of H₂ O to O₂ remains the bottleneck to the overall water-splitting reaction. Oxidation of CH₄ to CH₃ OH might be combined with water reduction instead, so that H₂ and CH₃ OH chemical fuels can be simultaneously produced through a one-step process under solar illumination. This combination would be a promising approach towards a more sustainable future of chemistry, in which developing different strategies for artificial photosynthesis is of paramount importance. By using free and adsorbed HO^. radicals on the semiconductor surface, CH₄ can be activated to H₃ C^. radicals and converted into CH₃ OH, respectively, with great selectivity up to 100 %. The present lack of efficient photosynthetic systems for the formation of H₂ and CH₃ OH from abundant H₂ O and CH₄ motivates future research for basic science and industrial applications.

Analysis of ambient formaldehyde in the eastern region of India along Indo-Gangetic Plain

Ambient levels of formaldehyde (HCHO) were measured in the tropical urban mega city of Kolkata from July 2012 to April 2014, based on USEPA Compendium Method TO-11A using 2,4-dinitrophenylhydrazine (2,4-DNPH). The samples were analyzed by isocratic reverse-phase high-performance liquid chromatography (HPLC) with an ultraviolet detector at a wavelength of 360 nm. High values of HCHO were recorded at our site. The highest and average HCHO mixing ratio measured for the entire study period was 803 and 217 ppbv respectively. Seasonal wind regimes have been found to influence the seasonal pattern of HCHO mixing ratio at this site resulting in relatively higher mixing ratio of HCHO during the pre-monsoon periods as compared to the others. Apart from these, sampling-based measurements of CH4 and continuous measurements of ozone (O3) and CO were also performed with the objective to study the interrelationship of HCHO with these species. The results suggest the presence of highly complex chemistry among them.

Improved selectivity for partial oxidation of methane to methanol in the presence of nitrite ions and BiVO4 photocatalyst

Nitrite ions are shown to significantly improve the selectivity of the photocatalytic oxidation of methane to methanol.

Recent advances in heterogeneous selective oxidation catalysis for sustainable chemistry

Oxidation catalysis not only plays a crucial role in the current chemical industry for the production of key intermediates such as alcohols, epoxides, aldehydes, ketones and organic acids, but also will contribute to the establishment of novel green and sustainable chemical processes. This review is devoted to dealing with selective oxidation reactions, which are important from the viewpoint of green and sustainable chemistry and still remain challenging. Actually, some well-known highly challenging chemical reactions involve selective oxidation reactions, such as the selective oxidation of methane by oxygen. On the other hand some important oxidation reactions, such as the aerobic oxidation of alcohols in the liquid phase and the preferential oxidation of carbon monoxide in hydrogen, have attracted much attention in recent years because of their high significance in green or energy chemistry. This article summarizes recent advances in the development of new catalytic materials or novel catalytic systems for these challenging oxidation reactions. A deep scientific understanding of the mechanisms, active species and active structures for these systems are also discussed. Furthermore, connections among these distinct catalytic oxidation systems are highlighted, to gain insight for the breakthrough in rational design of efficient catalytic systems for challenging oxidation reactions.

Effect of size of catalytically active phases in the dehydrogenation of alcohols and the challenging selective oxidation of hydrocarbons

The size of the active phase is one of the most important factors in determining the catalytic behaviour of a heterogeneous catalyst. This Feature Article focuses on the size effects in two types of reactions, i.e., the metal nanoparticle-catalysed dehydrogenation of alcohols and the metal oxide nanocluster-catalysed selective oxidation of hydrocarbons (including the selective oxidation of methane and ethane and the epoxidation of propylene). For Pd or Au nanoparticle-catalysed oxidative or non-oxidative dehydrogenation of alcohols, the size of metal nanoparticles mainly controls the catalytic activity by affecting the activation of reactants (either alcohol or O(2)). The size of oxidic molybdenum species loaded on SBA-15 determines not only the activity but also the selectivity of oxygenates in the selective oxidation of ethane; highly dispersed molybdenum species are suitable for acetaldehyde formation, while molybdenum oxide nanoparticles exhibit higher formaldehyde selectivity. Cu(II) and Fe(III) isolated on mesoporous silica are highly efficient for the selective oxidation of methane to formaldehyde, while the corresponding oxide clusters mainly catalyse the complete oxidation of methane. The lattice oxygen in iron or copper oxide clusters is responsible for the complete oxidation, while the isolated Cu(I) or Fe(II) generated during the reaction can activate molecular oxygen forming active oxygen species for the selective oxidation of methane. Highly dispersed Cu(I) and Fe(II) species also function for the epoxidation of propylene by O(2) and N(2)O, respectively. Alkali metal ions work as promoters for the epoxidation of propylene by enhancing the dispersion of copper or iron species and weakening the acidity.