Synthesis and characterization of mesoporous silica supported metallosalphen-azobenzene complexes: efficient photochromic heterogeneous catalysts for the oxidation of cyclohexane to produce KA oil

The oxidation of cyclohexane to produce KA oil (cyclohexanone and cyclohexanol) is important industrially but faces challenges such as low cyclohexane conversion at high KA oil selectivity, and difficult catalyst recyclability. This work reports the synthesis and evaluation of new heterogeneous catalysts consisting of Co(ii), Mn(ii), Ni(ii) and Cu(ii) salphen-azobenzene complexes [ML1] immobilized on amino-functionalized mesoporous silica (SBA-15, MCM-41, MCM-48) through coordination bonding. In the first step, the salphen-azobenzene ligand was synthesized and complexed with Co, Mn, Ni and Cu metal ions. In the second step, aminopropyltriethoxysilane (APTES) was grafted onto the surface of different types of commercial mesoporous silica. The immobilization of [ML1] onto the mesoporous silica surface and the thermal stability of the obtained materials were confirmed using different characterization techniques such as FT-IR, powder XRD, SEM, TEM, BET, and TGA. The obtained results revealed high dispersion of [ML1] through the silica surface. The catalytic activity of the prepared materials Silica-N-ML1 was evaluated on the cyclohexane oxidation to produce KA oil using various oxidants. The cis-trans isomerization of the azobenzene upon UV irradiation was found to affect the catalytic performance of Silica-N-ML1. The cis isomer of SBA-15-N-CoL1 exhibited the highest cyclohexane conversion (93%) and KA selectivity (92%) under mild conditions (60 °C, 6 h) using m-CPBA as oxidant. Moreover, The SBA-15-N-CoL1 showed high stability during four successive cycles.

Chiral Mesostructured Inorganic Materials with Optical Chiral Response

Fabricating chiral inorganic materials and revealing their unique quantum confinement-determined optical chiral responses are crucial tasks in the multidisciplinary fields of chemistry, physics, and biology. The field of chiral mesostructured inorganic materials started from the synthesis of individual nanocrystals and evolved to include their assembly from metals, semiconductors, ceramics, and inorganic salts endowed with various chiral structures ranging from atomic to micron scales. This tutorial review highlights the recent research on chiral mesostructured inorganic materials, especially the novel expression of mesostructured chirality and endowed optical chiral response, and it may inspire us with new strategies for the design of chiral inorganic materials and new opportunities beyond the traditional applications of chirality. Fabrication methods for chiral mesostructured inorganic materials are classified according to chirality type, scale, and symmetry-breaking mechanism. Special attention is given to highlight systems with original discoveries, exceptional phenomena, or unique mechanisms of optical chiral response for left- and right-handedness.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Direct assessment of confinement effect in zeolite-encapsulated subnanometric metal species

Subnanometric metal species confined inside the microporous channels/cavities of zeolites have been demonstrated as stable and efficient catalysts. The confinement interaction between the metal species and zeolite framework has been proposed to play the key role for stabilization, though the confinement interaction is elusive to be identified and measured. By combining theoretical calculations, imaging simulation and experimental measurements based on the scanning transmission electron microscopy-integrated differential phase contrast imaging technique, we have studied the location and coordination environment of isolated iridium atoms and clusters confined in zeolite. The image analysis results indicate that the local strain is intimately related to the strength of metal-zeolite interaction and a good correlation is found between the zeolite deformation energy, the charge state of the iridium species and the local absolute strain. The direct observation of confinement with subnanometric metal species encapsulated in zeolites provides insights to understand their structural features and catalytic consequences.

Zeolite-encapsulated metal nanoparticles have important catalytic properties, but their effect on the zeolite local structure has been difficult to characterize. Here the authors, using DFT calculations and scanning transmission electron microscopy, characterize the local strain due to confinement effects in metal-zeolite catalysts.

Preparation and Asymmetric Induction Evaluation of the First Ephedrine-Based Ligands Immobilized on Magnetic Nanoparticles

Herein, the synthesis and catalytic activity of two ephedrine-based catalysts and two ephedrine-based magnetic nanoparticle-supported catalysts are reported. All catalysts developed were tested in the addition of diethylzinc to aromatic aldehydes and in the Henry reaction. The homogeneous catalysts showed moderate catalytic activity in the organozinc addition and good activity in the Henry reaction, whereas in the case of the nanocatalyst, it was not effective in the addition of diethylzinc to aldehydes and gave reasonable results in the Henry reaction. Moreover, the nanocatalyst remained unchanged over the course of up to three catalytic cycles. To the best of our knowledge, the proposed system is the first recyclable ephedrine-based magnetic nanocatalyst employed in an enantioselective reaction.

Anisotropic nanomaterials for asymmetric synthesis

The production of enantiopure chemicals is an essential part of modern chemical industry. Hence, the emergence of asymmetric catalysis led to dramatic changes in the procedures of chemical synthesis, and now it provides the most advantageous and economically executable solution for large-scale production of chiral chemicals. In recent years, nanostructures have emerged as potential materials for asymmetric synthesis. Indeed, on the one hand, nanomaterials offer great opportunities as catalysts in asymmetric catalysis, due to their tunable absorption, chirality, and unique energy transfer properties; on the other hand, the advantages of the larger surface area, increased number of unsaturated coordination centres, and more accessible active sites open prospects for catalyst encapsulation, partial or complete, in a nanoscale cavity, pore, pocket, or channel leading to alteration of the chemical reactivity through spatial confinement. This review focuses on anisotropic nanomaterials and considers the state-of-the-art progress in asymmetric synthesis catalysed by 1D, 2D and 3D nanostructures. The discussion comprises three main sections according to the nanostructure dimensionality. We analyze recent advances in materials and structure development, discuss the functional role of the nanomaterials in asymmetric synthesis, chirality, confinement effects, and reported enantioselectivity. Finally, the new opportunities and challenges of anisotropic 1D, 2D, and 3D nanomaterials in asymmetric synthesis, as well as the future prospects and current trends of the design and applications of these materials are analyzed in the Conclusions and outlook section.

Advances in Chiral Metal-Organic and Covalent Organic Frameworks for Asymmetric Catalysis

Asymmetric catalysis is of crucial importance owing to the huge and rising demand for optically pure substances. Metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), as two emerging crystalline porous materials, have presented great promising applications for heterogeneous asymmetric catalysis. The unique properties, such as, highly regular porous structures, prominent structural tunability, and well-ordered catalytic sites, render chiral MOFs (CMOFs) and chiral COFs (CCOFs) highly active and enantioselective for a large number of asymmetric catalytic organic transformations. Furthermore, they provide a useful platform for facile mechanistic understanding and catalyst design. This review provides an overview of the advancements in CMOFs and CCOFs for asymmetric catalysis. The designs, syntheses and structures of these crystalline porous materials, and their asymmetric catalytic performance are described. And the perspectives on challenges and opportunities in development of CMOFs and CCOFs are discussed. It is anticipated that this review will shed light on the heterogeneous asymmetric catalysis with CMOFs and CCOFs and motivate further research in this promising field.

Gold nanoparticles grown on a hydrophobic and texturally tunable PDMS-like framework

A sol-gel analogue of PDMS was used to built hydrophobic siloxane supports, while confining gold nanoparticles.

Optimized Immobilization Strategy for Dirhodium(II) Carboxylate Catalysts for C-H Functionalization and Their Implementation in a Packed Bed Flow Reactor

Herein we demonstrate a packed bed flow reactor capable of achieving highly regio- and stereoselective C-H functionalization reactions using a newly developed Rh₂ (S-2-Cl-5-CF₃ TPCP)₄ catalyst. To optimize the immobilized dirhodium catalyst employed in the flow reactor, we systematically study both (i) the effects of ligand immobilization position, demonstrating the critical factor that the catalyst-support attachment location can have on the catalyst performance, and (ii) silica support mesopore length, demonstrating that decreasing diffusional limitations leads to increased accessibility of the active site and higher catalyst turnover frequency. We employ the immobilized dirhodium catalyst in a simple packed bed flow reactor achieving comparable yields and levels of enantioselectivity to the homogeneous catalyst employed in batch and maintain this performance over ten catalyst recycles.

Synthesis of Chiral Allylic Esters by Using the New Recyclable Chiral Heterogeneous Oxazoline-Based Catalysts

A new class of recyclable supported chiral heterogeneous ligands has been synthesized by the reaction of functionalized mesoporous SBA-15 with aliphatic- and aromatic-substituted chiral amino oxazoline ligands. The obtained chiral heterogeneous ligands were characterized by several techniques such as Fourier transform infrared, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and BET-BJH. The application of these new heterogeneous ligands in copper-catalyzed asymmetric allylic oxidation of olefins by using perester showed better yields up to 95% and better enantioselectivities up to 96% compared to the corresponding homogeneous catalysts. These findings can be considered as an important step in the advancement of green chemistry. Investigation of the recyclability of the catalysts confirmed that they were easily recovered and reused eight times without significant losses in reactivity, yield, and enantioselectivity.

Porous Organic Frameworks Featured by Distinct Confining Fields for the Selective Hydrogenation of Biomass-Derived Ketones

The asymmetric hydrogenation of biomass-derived molecules for the preparation of single enantiomer compounds is an effective method to reduce the rapid consumption of fossil resources. Porous organic frameworks (POFs) with pure organic surfaces may provide unusual confinement effects for organic substrates in chiral catalysis. Here, a series of POF catalysts are designed with chiral active centers decorated into sharply defined one-dimensional channels with diameters in the range of 1.2-2.9 nm. Due to the synergistic effect originating from the conjugated inner wall, the POF material (aperture size 2.4 nm) concentrates over 90% of aromatic species into the porous architecture, and its affinity is one or two orders of magnitude higher than those of classical porous solids. As determined by PBE+D3 calculation, the phenyl fragment reveals strong π-π interaction for steric hindrance around the metal active site to achieve stronger asymmetric induction. Therefore, this POF catalyst achieves high conversion (>99% yield) and enantioselectivity (>99% ee) for various substrates. The advantages of using the POF platform as a chiral catalyst can provide new perspectives on POF-based solid-state host-guest chemistry and asymmetric heterogeneous catalysis.

Assessment of H-β zeolite as an ochratoxin binder for poultry

Most of the cereal-based ingredients used in poultry feed are contaminated with ochratoxin-A (OTA). We have investigated H-β zeolite (HBZ) as a new OTA binder for poultry, along with widely used clay mineral-based product (CM), using in vitro and in vivo methods. In vitro binding experiment was carried out using a biphasic assay, consisting of adsorption at pH 3.2 and desorption at pH 6.8. High adsorption (>98%) with less desorption (<5%) was observed for HBZ, whereas CM showed high binding (>98%) and moderate desorption (48%). In the in vitro experiments with the different simulated gastro-intestinal pH buffers, HBZ did not desorb OTA at any of the pH. Desorption of OTA was observed with CM, as the pH increases. From the in vitro kinetic and chemisorption studies, faster, stronger, and higher adsorption was observed for HBZ. Thermodynamic studies showed positive entropy (22.76 KJ/mol K) for HBZ, signifying predominant hydrophobic interactions towards OTA, whereas CM exhibited negative entropy (-3.67 KJ/mol K). The in vivo binding efficacy of HBZ and CM was tested in 5-wk-old broiler chickens. The study consisted of 4 experimental groups, each with 6 replicates having 2 birds per replicate. The groups were control, negative control (no toxin binder), T1 (HBZ at 1 kg/ton of feed), and T2(CM at 1 kg/ton of feed). Except control, all the replicates received 20 µg of OTA in the feed. Excreta samples of T1, T2, and NC contained 11.57, 7.16, and 2.78 µg of OTA respectively, which was significantly different from each other (P < 0.05). A growth performance trial was conducted in broiler chickens for 35 D. A total of 288 one-day-old birds were randomly segregated to 3 treatment groups, each with 8 replicates of 12 birds each. Treatment groups consisted of control, T1, and T2, treated with no toxin binder, HBZ, and CM at 1 kg/ton of feed, respectively. None of the treatment groups including control, affected BW gain, and feed conversion ratio (P > 0.05).

Major advances in the development of ordered mesoporous materials

This feature article presents the main developments in the area of ordered mesoporous materials (OMMs) since their discovery in 1992, which is considered one of the milestones in the history of porous materials.

Chiral covalent organic frameworks: design, synthesis and property

Owing to the unique structural features and facile tunability of the subcomponents and channels, chiral COFs show great potential in heterogeneous catalysis, enantioselective separation, and recognition.

Spectroscopy for model heterogeneous asymmetric catalysis

Heterogeneous catalysis has vastly benefited from investigations performed on model systems under well-controlled conditions. The application of most of the techniques utilized for such studies is not feasible for asymmetric reactions as enantiomers possess identical physical and chemical properties unless while interacting with polarized light and other chiral entities. A thorough investigation of a heterogeneous asymmetric catalytic process should include probing the catalyst prior to, during, and after the reaction as well as the analysis of reaction products to evaluate the achieved enantiomeric excess. I present recent studies that demonstrate the strength of chiroptical spectroscopic methods to tackle the challenges in investigating model heterogeneous asymmetric catalysis covering all the abovementioned aspects.

Facile Synthesis of P25@Pd Core-Shell Catalyst with Ultrathin Pd Shell and Improved Catalytic Performance in Heterogeneous Enantioselective Hydrogenation of Acetophenone

Heterogeneous enantioselective hydrogenation is an ideal method for synthesizing important chiral compounds in pesticides and pharmaceuticals. Up to the present, supported noble-metal catalysts are most widely studied in heterogeneous enantioselective hydrogenations. However, it is found that the weak interactions existing on the surface of support may have negative effects on the enantioselectivity. Herein, a new category of TiO2 (Aeroxide® P25) supported Pd catalyst with ultrathin Pd shell was successfully prepared via a simple strategy based on the reduction of PdI carbonyl complex. Characterization results show that a well-dispersed ultrathin Pd shell with an average thickness of ~1.0 nm and a Pd loading of 36 wt.% was formed over the surface of P25 support. By excluding the negative weak interactions from the support, the P25@Pd core-shell catalyst with unique electronic properties of Pd exhibits higher activity and enantioselectivity than that of Pd/P25 catalyst prepared by the impregnation method and unsupported Pd black catalyst in the enantioselective hydrogenation of acetophenone.

Effects of pore surfaces on the electronic states of metal complexes formed on bipyridine periodic mesoporous organosilica

A combined experimental–theoretical study clarifies correlations between the pore-surface structures and the electronic properties of metal complexes on BPy-PMO.

Asymmetric fluorination of indanone-2-carboxylates using a polystyrene-supported diphenylamine-linked bis(oxazoline) complex

A highly enantioselective fluorination of indanone-2-carboxylates catalyzed by a polystyrene-supported diphenylamine-linked bis(oxazoline) (PS-box)-Cu(OTf)₂ complex has been developed in a continuous flow system. The supported complex exhibited extremely efficient catalytic performance with high activity, affording the corresponding products in excellent yields (up to 99% yield) with excellent enantioselectivities (up to 99% ee) and more than 4000 turnover number (TON).

Bottom-Up Assembly of a Highly Efficient Metal-Organic Framework for Cooperative Catalysis

In this study, we demonstrate a bottom-up assembly of a monomeric copper complex and a two-dimensional (2-D) heterometallic metal-organic framework (MOF) from a carboxylate-functionalized tridentate Schiff base ligand and metal ions. The obtained 2-D MOF features a unique bimetallic copper center which is different from its monometallic precursor and acts as an efficient heterogeneous catalyst for the Friedel-Crafts reaction and Henry reaction. The MOF catalyst shows a remarkably superior activity compared to its homogeneous counterparts in a wide range of substrates. It is presumably ascribed to the dual activation of the substrates by the active bimetallic copper center confined in the MOF network, which is supported by the significant changes in catalytic activity at low catalyst/substrates ratios when using the 2-D MOF and its precursor as catalysts, respectively. Moreover, the MOF catalyst also shows an excellent stability and recyclability. Our work, therefore, provides a stepwise strategy to design a heterogeneous cooperative catalyst, by taking advantage of the modulated structure of MOF and tunable functionality of the tridentate Schiff base, with high performance in a variety of organic synthesis.

NiMoO4@NiWO4 honeycombs as a high performance electrode material for supercapacitor applications

NiMoO₄@NiWO₄ electrode with honeycomb-like structure exhibits very good specific capacitance and cyclic stability than the NiMoO₄ electrode.

Molecular heterogeneous catalysts derived from bipyridine-based organosilica nanotubes for C-H bond activation

Heterogeneous metal complex catalysts for direct C-H activation with high activity and durability have always been desired for transforming raw materials into feedstock chemicals. This study described the design and synthesis of one-dimensional organosilica nanotubes containing 2,2'-bipyridine (bpy) ligands in the framework (BPy-NT) and their post-synthetic metalation to provide highly active and robust molecular heterogeneous catalysts. By adjusting the ratios of organosilane precursors, very short BPy-NT with ∼50 nm length could be controllably obtained. The post-synthetic metalation of bipyridine-functionalized nanotubes with [IrCp*Cl(μ-Cl)]2 (Cp* = η5-pentamethylcyclopentadienyl) and [Ir(cod)(OMe)]2 (cod = 1,5-cyclooctadiene) afforded solid catalysts, IrCp*-BPy-NT and Ir(cod)-BPy-NT, which were utilized for C-H oxidation of heterocycles and cycloalkanes as well as C-H borylation of arenes. The cut-short nanotube catalysts displayed enhanced activities and durability as compared to the analogous homogeneous catalysts and other conventional heterogeneous catalysts, benefiting from the isolated active sites as well as the fast transport of substrates and products. After the reactions, a detailed characterization of Ir-immobilized BPy-NT via TEM, SEM, nitrogen adsorption, UV/vis, XPS, and 13C CP MAS NMR indicated the molecular nature of the active species as well as stable structures of nanotube scaffolds. This study demonstrates the potential of BPy-NT with a short length as an integration platform for the construction of efficient heterogeneous catalytic systems for organic transformations.

Nickel containing ionic liquid based ordered nanoporous organosilica: a powerful and recoverable catalyst for synthesis of polyhydroquinolines

The synthesis, characterization and catalytic application of a novel nickel containing ionic liquid based ordered mesoporous organosilica are demonstrated.