Effects of grinding with microcrystalline cellulose and cyclodextrins on the ketoprofen physicochemical properties

Formulation Development of Mirtazapine Liquisolid Compacts: Optimization Using Central Composite Design

Mirtazapine is a tetracyclic anti-depressant with poor water solubility. The aim of this study was to improve the dissolution rate of mirtazapine by delivering the drug as a liquisolid compact. Central composite design (CCD) was employed for the preparation of mirtazapine liquisolid compacts. In this, the impacts of two independent factors, i.e., excipient ratio (carrier:coating) and different drug concentration on the response of liquisolid system were optimized. Liquisolid compacts were prepared using propylene glycol as a solvent, microcrystalline cellulose as a carrier, and silicon dioxide (Aerosil) as the coating material. The crystallinity of the formulated drug and the interactions between the excipients were examined using X-ray powder diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR), respectively. The dissolution study for the liquisolid compact was carried out as per FDA guidelines. The results showed loss of crystallinity of the mirtazapine in the formulation and was completely solubilized in non-volatile solvent and equally dispersed throughout the powder system. Moreover, drug dissolution was found to be higher in liquisolid compacts than the direct compressed conventional tablets (of mirtazapine). The liquisolid technique appears to be a promising approach for improving the dissolution of poorly soluble drugs like mirtazapine.

Preparation and physicochemical characterization of binary and ternary ground mixtures of carvedilol with PVP and SLS aimed to improve the drug dissolution

The objective of the present study was to enhance the dissolution rate of carvedilol (CA), a poorly water-soluble antihypertensive drug, using a co-grinding method in the presence of polyvinylpyrrolidone (PVP) and sodium lauryl sulfate (SLS). Various ratios of CA:PVP:SLS were ground by a planetary ball mill. They were studied in terms of dissolution, solubility, and particle size. The solid state and morphology of the intact drug and prepared samples were also characterized using differential scanning calorimetry (DSC), infrared spectroscopy (IR), X-ray diffraction (XRD), and scanning electron microscope (SEM). According to the results, co-grinding in the presence of PVP and SLS significantly increased CA dissolution rate. DE₆₀ (dissolution efficiency) obtained for the best ternary ground mixture (89.31%) was 3.4 and 4.5 times higher than that of the related physical mixture (PM) and the intact drug, respectively. Further, the solubility of this formulation was about 10 times higher compared to that of the intact CA. A direct correlation was also observed between the chamber rotation speed of the planetary mill within the range of 100-400 rpm and CA dissolution rate. Finally, DSC, IR, and XRD analysis ruled out any polymorphic changes and chemical interactions during the grinding process.

Grinding as Solvent-Free Green Chemistry Approach for Cyclodextrin Inclusion Complex Preparation in the Solid State

Among the different techniques proposed for preparing cyclodextrin inclusion complex in the solid state, mechanochemical activation by grinding appears as a fast, highly efficient, convenient, versatile, sustainable, and eco-friendly solvent-free method. This review is intended to give a systematic overview of the currently available data in this field, highlighting both the advantages as well as the shortcomings of such an approach. The possible mechanisms involved in the inclusion complex formation in the solid state, by grinding, have been illustrated. For each type of applied milling device, the respective process variables have been examined and discussed, together with the characteristics of the obtained products, also in relation with the physicochemical characteristics of both the drug and cyclodextrin subjected to grinding. The critical process parameters were evidenced in order to provide a useful guide for a rational selection of the most suitable conditions for an efficient inclusion complex preparation by grinding, with the final purpose of promoting a wider use of this effective solvent-free cyclodextrin inclusion complex preparation method in the solid state.

Nimesulide/methyl β-cyclodextrin inclusion complexes: physicochemical characterization, solubility, dissolution, and biological studies

Nimesulide (NIM) is an insoluble nonsteroidal anti-inflammatory drug (NSAID). Complexation of drug with methyl β-cyclodextrin was evaluated to improve solubility and dissolution rate of NIM. Complexation was achieved via a coevaporation technique to obtain different drug to polymer molar ratios (1:1, 1:2, and 1:3). The physicochemical characterization of the systems using powder X-ray diffraction and infrared spectroscopy was carried out to understand the influence of this technological process on the physical status of single components and complex systems and to detect possible interactions between drug and carrier. Moreover, quantitative solubility and in vitro dissolution studies of NIM alone and NIM inclusion complexes were studied in the dissolution media of phosphate buffer pH 5.5 and 7.4. The analysis provided existence of a molecular interaction between drug and carrier together in the complex state. The study showed that the inclusion systems enhanced of drug solubility, dissolution rate, and anti-inflammatory activity.

Statistical approach for assessing the influence of calcium silicate and HPMC on the formulation of novel alfuzosin hydrochloride mucoadhesive-floating beads as gastroretentive drug delivery systems

Multiparticulate floating drug delivery systems have proven potential as controlled-release gastroretentive drug delivery systems that avoid the "all or none" gastric emptying nature of single-unit floating dosage forms. An objective of the presence investigation was to develop calcium silicate (CaSi)/calcium alginate (Ca-Alg)/hydroxypropyl methylcellulose (HPMC) mucoadhesive-floating beads that provide time- and site-specific drug release of alfuzosin hydrochloride (Alf). Beads were prepared by simultaneous internal and external gelation method utilizing 3(2) factorial design as an experimental design; with two main factors evaluated for their influence on the prepared beads; the concentration of CaSi as floating aid (X (1)) and the percentage of HPMC as viscosity enhancer and mucoadhesive polymer (X (2)), each of them was tested in three levels. Developed formulations were evaluated for yield, entrapment efficiency, particle size, surface topography, and buoyancy. Differential scanning calorimetry, Fourier transform infrared spectroscopy, in vitro drug release, as well as in vitro mucoadhesion using rat stomach mucosal membrane were also conducted. Percentage yield and entrapment efficiency ranged from 57.03% to 78.51% and from 49.78% to 83.26%, respectively. Statistical analysis using ANOVA proved that increasing the concentration of either CaSi or HPMC significantly increased the beads yield. Both CaSi and HPMC concentrations were found to significantly affect Alf release from the beads. Additionally, higher CaSi concentration significantly increased the beads diameter while HPMC concentration showed significant positive effect on the beads mucoadhesive properties. CaSi/Ca-Alg/HPMC beads represent simple floating-mucoadhesive gastroretentive system that could be useful in chronopharmacotherapy of benign prostatic hyperplasia.

Dissolution and solid-state characterization of poorly water-soluble drugs in the presence of a hydrophilic carrier

The aim of this study was to investigate the effects of a hydrophilic carrier on the solid-state and dissolution characteristics of poorly water-soluble drugs. Three poorly water-soluble drugs, ibuprofen, carbamazepine, and nifedipine, were studied in combination with hydroxypropyl cellulose (HPC), a low molecular weight hydrophilic polymer, without the use of solvent. A 1:1 drug-polymer ratio was used to evaluate the percent drug release, crystallinity, and wettability. A drug-polymer ratio of 1:4 was also used in co-grinding process to evaluate the effect of polymer levels on drug release. Dissolution studies were carried out in deionized water. Mean dissolution time (MDT) was calculated, and statistical analysis of MDTs was done following a single factor one-way analysis of variance. The dissolution rate of the drugs was enhanced by several folds by the simple process of co-grinding with HPC. X-ray diffraction studies were done to investigate the effects of physical and co-ground mix with HPC on the crystallinity of the drugs, which indicated a partial loss in crystallinity upon grinding. Differential scanning calorimetry studies were performed in order to identify possible solid-state interactions between the respective drugs and HPC. Wettability of the drugs by a 0.5% aqueous HPC solution was compared with that of water and n-hexane using the "Washburn method." Increased wetting and hydrophilization of the drugs by HPC, enlarged surface area due to particle size reduction, and a decrease in the degree of crystallinity were identified as the likely contributors to dissolution rate enhancement.

Enhancing effect of hydroxypropyl-β-cyclodextrin on the intestinal absorption process of genipin

The purpose of this work is to investigate the effect of the genipin/hydroxypropyl-β-cyclodextrin (HP-β-CD) inclusion complex on the intestinal absorption of genipin and identify its mechanism of action. The phase solubility profile was classified as A(L) type, indicating the formulation of a 1:1 stoichiometry inclusion complex. Fourier transform infrared spectroscopy, Differential scanning calorimetry, X-ray powder diffractometry, and (1)H nuclear magnetic resonance (NMR) and two-dimensional (2D) (1)H rotating-frame Overhauser enhancement (ROESY) NMR spectroscopies further confirmed the formulation of the inclusion complex with superior dissolution properties than the drug alone. The results of single-pass intestinal perfusion showed that the intestinal absorption of genipin was affected by P-glycoprotein (Pgp). The absorption rate and permeability value of the inclusion complex were significantly higher than the free drug, suggesting that its enhancing effect was involved in its solubilizing effect and Pgp inhibitory effect. The mechanisms of HP-β-CD on Pgp inhibition were demonstrated by restraining the Pgp ATPase activity rather than changing the fluidity of the cell membrane.

Solubility and dissolution enhancement of etoricoxib by solid dispersion technique using sugar carriers

The aim of the present study was to improve solubility and dissolution of the poorly aqueous soluble drug, etoricoxib by solvent evaporation technique using various sugar carriers, such as lactose, sucrose, and mannitol. Etoricoxib solid dispersions and their respective physical mixtures using lactose, sucrose, and mannitol were prepared in different ratios by solvent evaporation technique. The percent yield, drug content, saturation solubility, and in vitro dissolution of etoricoxib solid dispersions and physical mixtures were analyzed. Etoricoxib solid dispersions were characterized by FTIR spectroscopy, XRD, and DSC analysis. The FTIR spectroscopic analysis revealed the possibility of intermolecular hydrogen bonding in various solid dispersions. The XRD and DSC studies indicated the transformation of crystalline etoricoxib (in pure drug) to amorphous etoricoxib (in solid dispersions) by the solid dispersion technology. Both the aqueous solubility and dissolution of etoricoxib were observed in all etoricoxib solid dispersions as compared with pure etoricoxib and their physical mixtures. The in vitro dissolution studies exhibited improved dissolution in case of solid dispersion using lactose than the solid dispersions using both sucrose and mannitol. The in vitro dissolution of etoricoxib from these solid dispersions followed Hixson-Crowell model.

Solid state mechanochemical activation of Silybum marianum dry extract with betacyclodextrins: Characterization and bioavailability of the coground systems

Silybum marianum dry extract, whose therapeutic use is partially restricted by the insolubility in water of its main flavonolignans, was subjected to a mechanochemical activation process in planetary mill using betacyclodextrins as carriers. After optimization of the operating conditions according to an established theoretical model, the best active-to-carrier proportion was selected from the preliminary trials. When using the optimized conditions, the mechanochemical process permits an improvement of the physico-chemical properties of the active, which reaches an "activated" solid state, that is stable for at least 1 year. In fact, XRD, DRIFT and Raman spectroscopy analyses showed that the main extract component, Silybin, completely lost its crystalline structure after co-grinding with betacyclodextrins and formed weak interactions with the carrier. The powder characteristics remarkably changed after co-grinding, leading to a sample with a very small mean diameter and with a twofold increase of the specific surface area in comparison to the dry extract. The activated solid state of the coground systems remarkably enhanced the in vitro drug dissolution kinetics with consequent improved oral bioavailability. Furthermore, the in vivo studies on rats revealed a 6.6-fold bioavailability increase respect to the S. marianum Italian commercial product used as reference (Silirex 200 capsules).

Effect of chirality on PVP/drug interaction within binary physical mixtures of ibuprofen, ketoprofen, and naproxen: a DSC study

We report on the thermal behavior of freshly prepared binary drug/polymer physical mixtures that contained ibuprofen, ketoprofen, or naproxen as a drug, and polyvinylpyrrolidone (PVP), hydroxyethylcellulose (HEC), or methylcellulose (MC) as excipient. At 6-10 degrees C/min heating rates the DSC detected a sharp, single endotherm that corresponds to the melting of drug. On heating physical mixtures of PVP and racemic ibuprofen or ketoprofen at lower heating rates, another endotherm was registered in front of the original one. To observe the additional endotherm, specific minimal values of the heating rate and of PVP weight fraction were needed; for ibuprofen and ketoprofen they were 1.5 and 2.0 degrees C/min, and 5 and 15% (w/w), respectively. At greater PVP weight fractions the top temperatures, T(mp), of both peaks were reduced almost linearly indicating strong solid-state interfacial reaction between the drug particles and PVP matrix. The additional endotherm was abolished at greater heating rates (2 degrees C/min for ibuprofen, 3 degrees C/min for ketoprofen), by replacing the racemate with respective S+-enantiomer and by replacing PVP with HEC and MC. Hence, the possible inclusion of enantioselective component within the PVP/drug interaction, responsible for the amorphization of physical mixture over storage, is assumed.

Solid state interaction of raloxifene HCl with different hydrophilic carriers during co-grinding and its effect on dissolution rate

This study investigated the effects of different classes of hydrophilic carriers (poly vinyl pyrrolidones [PVPs] [Plasdone K-25 and Plasdone S-630], cellulosic polymers [hydroxypropyl methyl cellulose and hydroxy propyl cellulose], and Sodium Alginate) on the solid state and dissolution rate of Raloxifene hydrochloride (R-HCl). Solid state characterizations of co-ground mixtures and physical mixtures in 1:1 and 1:2 ratios of drug to polymer were performed by employing laser diffractometer for particle size and differential scanning calorimetry (DSC) for solid state interactions. The results of particle size studies showed that only co-grinding with PVPs was more effective in the reduction of particle size than the milling of drug alone. DSC study indicated that the crystalline nature of the drug was reduced after co-grinding with PVPs when compared with their corresponding physical mixtures. The hydrophilic carriers other than PVPs did not reduce the crystalline nature of the drug significantly. X-ray diffraction and scanning electron microscopy were carried out for selected batches to confirm DSC results. Significant enhancement in dissolution rate and extent was observed with co-ground mixtures of drug and PVPs. Plasdone S-630 was found to be a better carrier for R-HCl in terms of achieving improvement in dissolution. In vitro dissolution data can be described by Hixson-Crowell model, indicating the drug release mechanism predominated by erosion.

Solid State and Dissolution Rate Characterization of Co-Ground Mixtures of Nifedipine and Hydrophilic Carriers

Co-ground powders of the poorly water-soluble drug nifedipine and a hydrophilic carrier, [partially hydrolyzed gelatin (PHG), polyvinylpyrrolidone (PVP), sodium dodecyl sulfate (SDS), hydroxypropyl methylcellulose (HPMC), polyethylene glycol (PEG), urea or Pluronic F108] were prepared in order to improve the dissolution rate of nifedipine. The effects of type of grinding equipment, grinding time, and type of hydrophilic carrier on the crystallinity of nifedipine (x-ray diffraction and differential scanning calorimetry) on the interaction between drug and carriers (differential scanning calorimetry), on the particle size and appearance (scanning electron microscopy), on the wettability (contact angle measurements), and on the drug release were investigated. Grinding nifedipine together with these carriers improved the dissolution rate. PHG-ground mixtures resulted in the fastest dissolution rate followed by PVP, SDS, HPMC, Pluronic, urea, and PEG. This effect was not only due to particle size reduction, which increased in the order PHG<PEG=SDS<Pluronic<drug<urea<HPMC<PVP, but also resulted from the ability of some carriers (PVP and HPMC) to prevent reaggregation of the finely divided drug particles. PVP, HPMC, and PHG formed a powder with amorphous drug. The carriers improved the wettability of the ground products in the order HPMC<drug<urea<PVP<SDS<PHG<PEG<Pluronic. Differential scanning calorimetry (DSC) measurements gave valuable information about the nature of drug crystallinity and the interactions with the carriers within the ground mixtures.

Compatibility Studies Between Ibuprofen or Ketoprofen with Cellulose Ether Polymer Mixtures Using Thermal Analysis

Differential scanning calorimetry (DSC) was used to investigate and detect incompatibilities between drugs such as: ibuprofen (IBU) or ketoprofen (KETO) with cellulose ether derivatives, which are frequently applied on controlled release dosage forms. Binary mixtures concerning methylcellulose (MC25) or hydroxypropylcellulose (HPC) with hydroxypropylmethylcellulose (HPMC) K15M or K100M in different ratios were prepared and evaluated by the appearance, shift, or disappearance of peaks and/or variations in the corresponding DeltaH values. According to the DSC results, binary mixtures between those polymers were found to be compatible, but their mixture with IBU or KETO, promotes a solid-solid interaction mainly with 1:1:1 (w/w) ratio (drug-excipient). However, when the drug:excipient interactions were detected, they were not found to affect the drug bioavailability. DSC was successfully employed to evaluate the compatibility of the drugs with the selected polymers.

Enhancement of the dissolution rate and gastrointestinal absorption of pranlukast as a model poorly water-soluble drug by grinding with gelatin

The effect of grinding with gelatin on the dissolution behavior and gastrointestinal absorption of a poorly water-soluble drug was evaluated using the antiasthmatic agent, pranlukast, as a model poorly water-soluble drug. A ground pranlukast-gelatin mixture was prepared by grinding equal quantities of pranlukast and gelatin. In the dissolution testing, the dissolution rate of pranlukast in the suspension of the ground pranlukast-gelatin mixture under conditions of pH 3.0, 5.0 and 7.0 was markedly faster than that in the suspension of pranlukast. According to powder X-ray diffractometry (PXRD) and differential scanning calorimetry (DSC) analysis, the enhanced dissolution rate of pranlukast produced by grinding with gelatin was caused by changing the crystalline state of pranlukast into an amorphous state. In an animal experiment, the bioavailability of pranlukast following oral administration of the ground pranlukast-gelatin mixture to rats was threefold greater than that following administration of pranlukast. In the in vitro permeation experiment, the amount of permeated pranlukast through Caco-2 cell monolayers after application of the ground pranlukast-gelatin mixture was greater than that after application of pranlukast. These results suggest that the enhancement of the gastrointestinal absorption of pranlukast by grinding with gelatin is due to enhancement of the dissolution rate. Grinding a poorly water-soluble drug with gelatin is a useful method of enhancing its gastrointestinal absorption.

Preparation and characterization of etoricoxib-beta-cyclodextrin complexes prepared by the kneading method

The binary system of etoricoxib with beta-cyklodextrin (beta-CD) was prepared by the kneading method. Drug-cyclodextrin interactions in solution were investigated by the phase solubility analysis. Differential scanning calorimetry, infrared spectroscopy, powder X-ray diffractometry and microscopic study were used to characterize the solid state of all binary systems, whereas their dissolution properties were evaluated according to the USP XXIII paddle method. The results indicate partial interaction of the drug with beta-CD in the physical mixture and complete interaction in the kneaded complex. The dissolution of etoricoxib was notably increased as compared to pure drug as well as its physical mixture. The complex showed more than 75% drug released in 30 min.

Danazol-beta-cyclodextrin binary system: a potential application in emergency contraception by the oral route

This study explored the potential of beta-cyclodextrin to improve the aqueous solubility and dissolution of danazol, investigated a simple and less expensive method for preparation of a danazol-beta-cyclodextrin binary system, and explored the potential application of a danazol-beta-cyclodextrin binary system as a single-dose emergency contraceptive. Phase solubility analysis indicated formation of a first-order soluble complex with stability constant 972.03 M(-1), while Job's plot affirmed 1:1 stoichiometry. The hyperchromic shift in the UV-Vis spectrum of danazol in the presence of beta-cyclodextrin indicated solubilization capability of beta-cyclodextrin for danazol. The extrinsic Cotton effect with a negative peak at 280.7 nm confirmed the inclusion of danazol in the asymmetric locus of beta-cyclodextrin. (1)H-nuclear magnetic resonance analysis suggested that the protons of the steroidal skeleton of danazol display favorable interactions with the beta-cyclodextrin cavity. The danazol-beta-cyclodextrin binary system was prepared by kneading, solution, freeze-drying, and milling methods. The extent of the enhancement of dissolution rate was found to be dependent on the preparation method. Dissolution studies showed a similar relative dissolution rate (2.85) of the danazol-beta-cyclodextrin binary system prepared by the freeze-drying and milling (in the presence of 13% moisture) methods. In a mouse model, the danazol-beta-cyclodextrin binary system at 51.2 mg/kg (equivalent to a 400-mg human dose) showed 100% inhibition of implantation when given postcoitally. Moreover, the danazol-beta-cyclodextrin binary system is safe up to 2000 mg/kg in the mouse (15.52 g/70 kg human) as a single oral dose. Thus, the danazol-beta-cyclodextrin binary system could serve as a new therapeutic application: an oral emergency contraceptive at a physiologically acceptable single dose.

Evaluation of the in vitro activity and in vivo bioavailability of realgar nanoparticles prepared by cryo-grinding

Arsenic trioxide (As2O3) has been a research focus because of its promising anticancer effects especially in the treatment of leukemia. Another arsenic compound, realgar (As2S2), has long been used as a therapeutic agent to treat some diseases in ancient China and Europe, and its medicinal effects have attracted increasing attentions in recent years. However, its poor water-solubility unfortunately results in poor bioavailability and hampers it from being studied and used for possible clinical application. In this study, nanosized realgar particles were prepared by cryo-grinding with polyvinylpyrrolidone (PVP) and/or sodium dodecyl sulfate (SDS). Major physical properties of the respective nanosized realgar particles were characterized. Co-grinding realgar with PVP and/or SDS produced smaller and more monodisperse suspension of nanoparticles. The in vitro cytotoxic effects of such nanosized realgar particles on selected human ovarian (CI80-13S, OVCAR, OVCAR-3) and cervical (HeLa) cancer cell lines were investigated. Significant anti-proliferation effect of these realgar nanoparticles on these cancer cell lines was observed. CI80-13S was most sensitive to the nanosized realgar particles with IC50 values of less than 1 microM as As2S2, whereas the other cancer cell lines had IC50 values in a range of 2-4 microM as As2S2. The cytotoxic activity of the realgar nanoparticles to these human gynecological cell lines was comparable to arsenic trioxide observed previously. In these cancer cell lines, the cytotoxic effects were caused by apoptosis as confirmed by cell cycle and DNA laddering analysis. In in vivo study, a remarkable increase in urinary recovery of arsenic was observed in rats after a single oral administration of the cryo-ground realgar particle suspension. Ranging from 58.5 to 69.6% of the administered dose of arsenic was recovered in urine in the first 48 h from the PVP and/or SDS co-ground preparations; whereas the original realgar powder gave a urinary recovery of only 24.9%. The finding suggested that size reduction of realgar particles to nano levels could enhance its bioavailability substantially.

Complexation of celecoxib with beta-cyclodextrin: characterization of the interaction in solution and in solid state

Inclusion complexation between celecoxib, a specific cyclooxygenase II inhibitor, and beta-cyclodextrin (beta-CD) was studied in solution and solid state. Drug cyclodextrin complexes were prepared by spray drying while physical mixtures were obtained by simple blending. Inclusion complexes were characterized by nuclear magnetic resonance spectroscopy (NMR), differential scanning calorimetry (DSC), X-ray diffractometry (XRD), scanning electron microscopy (SEM), infrared spectroscopy (IR), and polarimetry. Phase solubility analysis was carried out to determine the stability constant. Solubility studies revealed the existence of a 1:1 complex between celecoxib and beta-CD. NMR studies suggested a strong interaction between celecoxib and beta-CD prepared by spray drying. XRD and SEM analysis illustrated that celecoxib existed as an amorphous complexed form in spray-dried complexes. Dissolution studies showed that the celecoxib entrapped in spray-dried complexes dissolved much faster than the uncomplexed drug and physical mixtures. The data obtained suggest that celecoxib forms an inclusion complex with beta-CD in solution and solid state, which was confirmed by various analytical techniques. A shorter t50% of dissolution is found for the formulation prepared by spray drying when compared on a weight basis in a USP II apparatus.

Characterisation of nimesulide-betacyclodextrins systems prepared by supercritical fluid impregnation

The purpose of this study was to apply the supercritical CO(2) impregnation process for preparing solvent-free nimesulide (NMS)-betacyclodextrins (BCD) association systems with enhanced drug dissolution rate. Several drug-to-carrier molar ratios were tested (1:1; 1:2.5; 1:3.5) at different conditions of temperatures (40, 100, and 130 degrees C) and pressures (140, 190 or 220 bar). The physical and morphological characterisation of the systems using powder X-ray diffraction, thermal analysis, diffuse reflectance Fourier transform-infrared spectroscopy and scanning electron microscopy was carried out to understand the influence of this technological process on the physical status of single components and binary systems and to detect possible interactions between drug and carrier. These analyses provided no evidence of a complete inclusion of NMS in the carrier but the existence of interactions between drug and carrier together with a partial dehydration of the BCD and the formation of drug crystallites with lower melting point and heat of fusion than the native NMS. These phenomena were more intense when severe conditions of pressure and temperature (220 bar and 130 degrees C) were used during impregnation trials and when the amount of BCD augmented in the systems. These activated solid state of the impregnated systems promoted an enhancement of drug dissolution rate that, in keeping with the results of the physical characterisation, was function of the process conditions and BCD content.

Characterization of Ibuproxam Binary and Ternary Dispersions with Hydrophilic Carriers

This work investigates the possibility of increasing the dissolution properties of ibuproxam (a poorly water-soluble anti-inflammatory drug) using hydrophilic carriers such as polyvinylpyrrolidone (PVP), polyethylene glycol (PEG), or urea, alone or in combination. Phase-solubility studies showed that the carrier solubilizing power was in the order PEG>PVP>urea and evidenced a synergistic effect in drug solubility improvement when using carrier combinations. Binary and ternary systems, at 20/80 or 20/40/40 (w/w) drug/carrier(s) ratios, prepared by coevaporation of their ethanolic solutions or by cogrinding physical mixtures in a high-energy vibrational micromill, were characterized by differential scanning calorimetry (DSC), hot stage microscopy (HSM), and scanning electron microscopy (SEM) analyses. The results of dissolution tests (USP paddle method), in terms of Dissolution Efficiency, indicated that ternary systems were up to 35% more effective than the corresponding binary preparations and coevaporated products were up to 45% more efficacious than the corresponding coground ones. The IBUX-PEG-PVP coevaporated was the best product, allowing a more than three-times increase in Dissolution Efficiency with respect to drug alone; moreover, t50% (> 60 min for pure ibuproxam) was < 10 min, and 90% dissolution was achieved after 30 min, whereas only 40% was obtained after 60 min for pure drug. The best performance of this system was attributed to a joined effect of the strong amorphizing power of PVP (as demonstrated by solid state analyses) with the high solubilizing efficacy of PEG (as emerged from phase-solubility studies). The drug dissolution rate from solid dispersions remained practically unchanged after one-year storage at room temperature in closed containers.

Nanoparticle formation of poorly water-soluble drugs from ternary ground mixtures with PVP and SDS

Poorly water-soluble drugs N-5159, griseofulvin (GFV), glibenclamide (GBM) and nifedipine (NFP) were ground in a dry process with polyvinylpyrrolidone (PVP) and sodium dodecyl sulfate (SDS). Different crystallinity behavior of each drug during grinding was shown in the ternary Drug/PVP/SDS system. However, when each ternary Drug/PVP/SDS ground mixture was added to distilled water, crystalline nanoparticles which were 200 nm or less in size were formed and had excellent stability. Zeta potential measurement suggested that the nanoparticles had a structure where SDS was adsorbed onto the particles that were formed by the adsorption of PVP on the surface of drug crystals. Stable existence of crystalline nanoparticles was attributable to the inhibition of aggregation caused by the adsorption of PVP and SDS on the surface of drug crystals. Furthermore, the electrostatic repulsion due to the negative charge of SDS on a shell of nanoparticles could be assumed to contribute to the stable dispersion.

Investigation of the effects of grinding and co-grinding on physicochemical properties of glisentide

The purpose of the present study was to investigate the possibility of improving the dissolution properties of glisentide, a poorly water-soluble antidiabetic drug, by grinding in a high energy micromill, alone or in mixture with polyvinylpyrrolidone (PVP). Conventional and modulated differential scanning calorimetry (DSC, MDSC), thermogravimetry (TGA), X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), hot-stage FT-IR thermomicroscopy and scanning electron microscopy (SEM) were used to characterize the drug solid state, whereas its dissolution rates were determined according to the dispersed amount method. The techniques utilized enabled exclusion of polymorphism phenomena as a consequence of mechanical treatment, and revealed a progressive drug amorphization during grinding. In particular, MDSC allowed a clear determination of the glass transition temperature of the amorphous drug, enabling separation of glass transition from enthalpic relaxation. The amorphous state of the ground drug was the main responsible factor for the obtained 100% dissolution efficiency increase in comparison with the untreated drug. Further significant increases in dissolution properties, directly related to the polymer content in the mixture, were obtained by co-grinding with PVP, whose presence clearly favored drug amorphization, allowing a strong reduction of time and frequency of grinding necessary for obtaining complete drug amorphization.

Characterization of physicochemical properties of naproxen systems with amorphous beta-cyclodextrin-epichlorohydrin polymers

Ground mixtures of naproxen with amorphous beta-cyclodextrin-epichlorohydrin soluble (betaCd-EPS) or insoluble cross-linked (betaCd-EPI) polymers were investigated for both solid phase characterization (Differential Scanning Calorimetry, powder X-ray Diffractometry) and dissolution properties (dispersed amount method). The effect of different grinding conditions and of drug-to-carrier ratio was also evaluated. Co-grinding induced a decrease in drug crystallinity to an extent which depended on the grinding time, and was most pronounced for the cross-linked insoluble polymer, particularly in combinations at the lowest drug content. Both cyclodextrin polymers were more effective in improving the naproxen dissolution properties, not only than the parent betaCd but also than hydroxyalkyl-derivatives, and their performance was almost comparable to that of methyl-derivatives, previously found as the best carriers for naproxen. Dissolution efficiencies of naproxen from physical mixtures with betaCd-EPS, thanks to the high water solubility of this Cd-derivative, were up to three times higher than those from the corresponding products with betaCd-EPI. However this difference in their performance became much less evident in co-ground products and tended to progressively diminish with increasing the polymer content in the mixture, according to the better amorphizing power shown by betaCd-EPI during the co-grinding process. The 10/90 (w/w) drug-carrier co-ground products exhibited the best dissolution properties, giving dissolution efficiencies about 30 times higher than that of naproxen alone.