Polymer Waste-Based Highly Efficient Maleated Interfacial Modifier in iPP/SCF Composites—Some Notes on the Role of Processing in Their Thermal and Dynamic Mechanical Properties

This work has a two-fold objective. First, it attempts to present the excellent efficiency of a maleated interfacial agent (obtained by the authors by using atactic polypropylene industrial waste) when used as interfacial additive in polypropylene/short carbon fiber composites (iPP/SCF). Second, in this paper, we pay attention to the role played by processing in the final properties of the composite. This work has been performed by considering the emerging crystalline morphologies generated by the different shear forces that the molten material suffers depending on the molding method employed. The interfacial agent analyzed here consists of an atactic polypropylene containing succinic anhydride grafts obtained through a chemical modification process performed in solution. It incorporates different types of succinic grafts, such as succinic bridges between aPP chains and backbone and terminal grafts (aPP-SASA) in its structure, and contains 5.6% (5.6 × 10−4 g/mol) of grafted polar groups in total. The adhesion of the polyamide SCF sizing and the succinic units is followed by Field Emission Scanning Electronic Microscopy (FESEM) and Synchrotron Infrared Microscopy (SIRM). However, the main objective of this work is the study of the thermal and the dynamic mechanical behavior of the materials of a series of both compression- and injection-molded samples to ascertain the enhanced interfacial interactions in the material and further comparison between the results obtained by both processing operations. Therefore, we detect improvements of 200% in stiffness and 400% in the viscous response of the same SCF content composites caused by aPP-SASA, depending on the processing method used.

The Role of a Succinyl Fluorescein-Succinic Anhydride Grafted Atactic Polypropylene on the Dynamic Mechanical Properties of Polypropylene/Polyamide-6 Blends at the Polypropylene Glass Transition

The present article adequately supports a twofold objective. On one hand, the study of the dynamic mechanical behavior of polypropylene/polyamide-6 blends modified by a novel compatibilizer was the objective. This was previously obtained by chemical modification of an atactic polypropylene polymerization waste. On the other hand, the accurate predictions of these properties in the experimental space scanned was the objective. As a novelty, this compatibilizer contains grafts rather than just maleated ones. Therefore, it consists precisely of an atactic polymer containing succinic anhydride (SA) bridges and both backbone and terminal grafted succinyl-fluorescein groups (SFSA) attached to the atactic backbone (aPP-SFSA). Therefore, it contains 6.2% of total grafting (2.5% as SA and 3.7% as SF), which is equivalent to 6.2·× 10-4 g·mol-1. This interfacial agent was uniquely designed and obtained by the authors themselves. Essentially, this article focuses on how the beneficial effect of both PA6 and aPP-SFSA varies the elastic (E') and the viscous (E'') behavior of the iPP/aPP-SFSA/PA6 blend at the iPP glass transition. Thus, we accurately measured the Dynamic Mechanical Analysis (DMA) parameters (E', E'') at this specific point considering it represents an extremely unfavorable scenario for the interfacial modifier due to mobility restrictions. Hence, this evidences the real interfacial modifications caused by aPP-SFSA to the iPP/PA6 system. Even more, and since each of the necessary components in the blend typically interacts with one another, we employed a Box-Wilson experimental design by its marked resemblance to the "agent-based models". In this manner, we obtained complex algorithms accurately forecasting the dynamic mechanical behavior of the blends for all the composition range of the iPP/aPP-SFSA/PA6 system at the glass transition of iPP.