The Feasibility of Using the MFC Concept to Upcycle Mixed Recycled Plastics

Several mixed recycled plastics, namely, mixed bilayer polypropylene/poly (ethylene terephthalate) (PP/PET) film, mixed polyolefins (MPO) and talc-filled PP were selected for this study and used as matrices for the preparation of microfibrillar composites (MFCs) with PET as reinforcement fibres. MFCs with recycled matrices were successfully prepared by a three-step processing (extrusion—cold drawing—injection moulding), although significant difficulties in processing were observed. Contrary to previous results with virgin PP, no outstanding mechanical properties were achieved; they showed little or almost no improvement compared to the properties of unreinforced recycled plastics. SEM characterisation showed a high level of PET fibre coalescence present in the MFC made from recycled PP/PET film, while in the other MFCs, a large heterogeneity of the microstructure was identified. Despite these disappointing results, the MFC concept remains an interesting approach for the upcycling of mixed polymer waste. However, the current study shows that the approach requires further in-depth investigations which consider various factors such as viscosity, heterogeneity, the presence of different additives and levels of degradation.

Relationship between the Processing, Structure, and Properties of Microfibrillar Composites

The relationship between processing, morphology, and properties of polymeric materials has been the subject of numerous studies of academic and industrial research. Finding an answer to this question might result in guidelines on how to design polymeric materials. Microfibrillar composites (MFCs) are an interesting class of polymer-polymer composites. The advantage of the MFC concept lies in developing in situ microfibrils by which a perfect homogeneous distribution of the reinforcement in the matrix can be achieved. Their potentially excellent mechanical properties are strongly dependent on the aspect ratio of the fibrils, which is developed through a three-stage production process: melt blending, fibrillation, and isotropization. During melt blending, the polymers undergo different morphological changes, such as a breakup and coalescence of the droplets, which play a crucial role in defining the microstructure. During processing, various parameters may affect the morphology of the MFCs, which must be taken into account. Besides the processing parameters, the microstructure of the composite is dependent on the composition ratio of the blend and viscosity of the components, as well as the dispersion and distribution of the microfibrils. The objective here is to outline this importance and bring together an overview of the processing-structure-property relationship for MFCs.

The Formation of a Highly Oriented Structure and Improvement of Properties in PP/PA6 Polymer Blends during Extrusion-Stretching

During the “slit die extrusion-hot stretching” process, highly oriented polyamide 6 (PA6) dispersed phase was produced and retained in the polypropylene (PP) matrix directly. By adjusting the stretching forces, the PA6 spherical phase evolved into the ellipsoid, rod-like microfibril with a decreasing average diameter; then, the PA6 microfibrils broke. Moreover, the effects of the PA6 phases formed in the process of the microfibrillation on PP’s crystallization behaviors were studied systematically. As the stretching forces increased, the crystallization ability and orientation degree of PP crystals improved significantly. Differential scanning calorimetry and polarizing optical microscopy confirmed the formation of PP spherulite, fan-shaped lamellae and a transcrystalline layer under the induction of the PA6 phases with different morphology. In the PP/PA6 microfibrilar composites (MFCs), PP crystals showed smaller average size, more crystals and stronger interface adhesion due to more excellent heterogeneous nucleation ability of the PA6 microfibrils, which made contributions to the improvement of the melt elasticity responses and oxygen barrier properties of the PP/PA6 polymer blends.