Regulation of KinI kinesin ATPase activity by binding to the microtubule lattice

Cryo-EM reveals the structural basis of microtubule depolymerization by kinesin-13s

Kinesin-13s constitute a distinct group within the kinesin superfamily of motor proteins that promote microtubule depolymerization and lack motile activity. The molecular mechanism by which kinesin-13s depolymerize microtubules and are adapted to perform a seemingly very different activity from other kinesins is still unclear. To address this issue, here we report the near atomic resolution cryo-electron microscopy (cryo-EM) structures of Drosophila melanogaster kinesin-13 KLP10A protein constructs bound to curved or straight tubulin in different nucleotide states. These structures show how nucleotide induced conformational changes near the catalytic site are coupled with movement of the kinesin-13-specific loop-2 to induce tubulin curvature leading to microtubule depolymerization. The data highlight a modular structure that allows similar kinesin core motor-domains to be used for different functions, such as motility or microtubule depolymerization.

Kinesin-13s are microtubule depolymerases that lack motile activity. Here the authors present the cryo-EM structures of kinesin-13 microtubule complexes in different nucleotide bound states, which reveal how ATP hydrolysis is linked to conformational changes and propose a model for kinesin induced depolymerisation.

Homodimeric Kinesin-2 KIF3CC Promotes Microtubule Dynamics

KIF3C is one subunit of the functional microtubule-based kinesin-2 KIF3AC motor, an anterograde cargo transporter in neurons. However, KIF3C has also been implicated as an injury-specific kinesin that is a key regulator of axonal growth and regeneration by promoting microtubule dynamics for reorganization at the neuronal growth cone. To test its potential role as a modulator of microtubule dynamics in vitro, an engineered homodimeric KIF3CC was incorporated into a dynamic microtubule assay and examined by total internal reflection fluorescence microscopy. The results reveal that KIF3CC is targeted to the microtubule plus-end, acts as a potent catastrophe factor through an increase in microtubule catastrophe frequency, and does so by elimination of the dependence of the catastrophe rate on microtubule lifetime. Moreover, KIF3CC accelerates the catastrophe rate without altering the microtubule growth rate. Therefore, the ATP-promoted KIF3CC mechanism of catastrophe is different from the well-described catastrophe factors kinesin-13 MCAK and kinesin-8 Kip3/KIF18A. The properties of KIF3CC were not shared by heterodimeric KIF3AC and required the unique KIF3C-specific sequence extension in loop L11 at the microtubule interface. At the microtubule plus-end, the presence of KIF3CC resulted in modulation of the tapered structure typically seen in growing dynamic microtubules to microtubule blunt plus-ends. Overall our results implicate homodimeric KIF3CC as a unique promoter of microtubule catastrophe and substantiate its physiological role in cytoskeletal remodeling.

Distinct Interaction Modes of the Kinesin-13 Motor Domain with the Microtubule

Kinesins-13s are members of the kinesin superfamily of motor proteins that depolymerize microtubules (MTs) and have no motile activity. Instead of generating unidirectional movement over the MT lattice, like most other kinesins, kinesins-13s undergo one-dimensional diffusion (ODD) and induce depolymerization at the MT ends. To understand the mechanism of ODD and the origin of the distinct kinesin-13 functionality, we used ensemble and single-molecule fluorescence polarization microscopy to analyze the behavior and conformation of Drosophila melanogaster kinesin-13 KLP10A protein constructs bound to the MT lattice. We found that KLP10A interacts with the MT in two coexisting modes: one in which the motor domain binds with a specific orientation to the MT lattice and another where the motor domain is very mobile and able to undergo ODD. By comparing the orientation and dynamic behavior of mutated and deletion constructs we conclude that 1) the Kinesin-13 class specific neck domain and loop-2 help orienting the motor domain relative to the MT. 2) During ODD the KLP10A motor-domain changes orientation rapidly (rocks or tumbles). 3) The motor domain alone is capable of undergoing ODD. 4) A second tubulin binding site in the KLP10A motor domain is not critical for ODD. 5) The neck domain is not the element preventing KLP10A from binding to the MT lattice like motile kinesins.

The C-terminal region of the motor protein MCAK controls its structure and activity through a conformational switch

The precise regulation of microtubule dynamics is essential during cell division. The kinesin-13 motor protein MCAK is a potent microtubule depolymerase. The divergent non-motor regions flanking the ATPase domain are critical in regulating its targeting and activity. However, the molecular basis for the function of the non-motor regions within the context of full-length MCAK is unknown. Here, we determine the structure of MCAK motor domain bound to its regulatory C-terminus. Our analysis reveals that the MCAK C-terminus binds to two motor domains in solution and is displaced allosterically upon microtubule binding, which allows its robust accumulation at microtubule ends. These results demonstrate that MCAK undergoes long-range conformational changes involving its C-terminus during the soluble to microtubule-bound transition and that the C-terminus-motor interaction represents a structural intermediate in the MCAK catalytic cycle. Together, our work reveals intrinsic molecular mechanisms underlying the regulation of kinesin-13 activity.

DOI:http://dx.doi.org/10.7554/eLife.06421.001

Within a cell, there is a scaffold-like structure called the cytoskeleton that provides shape and structural support, and acts as a transport network for the movement of molecules around the cell. This scaffold contains highly dynamic polymers called microtubules that are made from a protein called tubulin. The constant growth and shrinking of the ends of the microtubules is essential to rebuild and adapt the cytoskeleton according to the needs of the cell.

A protein called MCAK belongs to a family of motor proteins that can move along microtubules. It generally binds to the ends of the microtubules to shorten them. Previous studies have found that a single MCAK protein binds to another MCAK protein to form a larger molecule known as a dimer. Part of the MCAK protein forms a so-called motor domain, which enables this protein to bind to the microtubules. One end of the protein, known as the C-terminus, controls the activity of this motor domain. However, it is not clear how this works.

Talapatra et al. have now revealed the three-dimensional structure of MCAK's motor domain with the C-terminus using a technique called X-ray crystallography. The experiments show that the C-terminus binds to the motor domain, which promotes the formation of the dimers. A short stretch of amino acids—the building blocks of proteins—in the C-terminus interacts with two motor molecules. This ‘motif’ is also found in other similar proteins from a variety of animals. However, once MCAK binds to a microtubule, the microtubule triggers the release of the C-terminus from the motor domain. This allows MCAK to bind more strongly to the microtubule.

The experiments also show that the binding of the C-terminus to the motor domain alters the ability of MCAK to associate with microtubules, which encourages the protein to reach the ends of the polymers. Future work is required to see whether other motor proteins work in a similar way.

DOI:http://dx.doi.org/10.7554/eLife.06421.002

Microtubule-depolymerizing kinesins in the regulation of assembly, disassembly, and length of cilia and flagella

Defects in ciliary assembly, maintenance, and signaling are associated with various human diseases and developmental disorders, termed ciliopathies. Eukaryotic flagella and cilia (interchangeable terms) are microtubule-based organelles. Thus, microtubule dynamics and microtubule-dependent transport are predicted to affect the structural integrity and functionality of cilia profoundly. Kinesin-2 is well known for its role in intraflagellar transport to transport ciliary precursors and signaling molecules. Recently, microtubule-depolymerizing kinesins found in kinesin-8, -13, and -14A families have emerged as regulators of cilia. We first discuss ciliary kinesins identified in the flagellar or ciliary proteome, and then focus on the function and regulation of microtubule-depolymerizing kinesins. Lastly, we review the recent advances of microtubule-depolymerizing kinesins in controlling ciliary assembly, disassembly, and length.

Kinesin-5 Kip1 is a bi-directional motor that stabilizes microtubules and tracks their plus-ends in vivo

In this study, we examined the anaphase functions of the S. cerevisiae kinesin-5 homolog Kip1. We show that Kip1 is attached to the mitotic spindle midzone during late anaphase. This attachment is essential to stabilize interpolar microtubule (iMTs) plus-ends. By detailed examination of iMT dynamics we show that at the end of anaphase, iMTs depolymerize in two stages: during the first stage, one pair of anti-parallel iMTs depolymerizes at a velocity of 7.7 µm/minute; during the second stage, ∼90 seconds later, the remaining pair of iMTs depolymerizes at a slower velocity of 5.4 µm/minute. We show that upon the second depolymerization stage, which coincides with spindle breakdown, Kip1 follows the plus-ends of depolymerizing iMTs and translocates toward the spindle poles. This movement is independent of mitotic microtubule motor proteins or the major plus-end binding or tracking proteins. In addition, we show that Kip1 processively tracks the plus-ends of growing and shrinking MTs, both inside and outside the nucleus. The plus-end tracking activity of Kip1 requires its catalytic motor function, because a rigor mutant of Kip1 does not exhibit this activity. Finally, we show that Kip1 is a bi-directional motor: in vitro, at high ionic strength conditions, single Kip1 molecules move processively in the minus-end direction of the MTs, whereas in a multi-motor gliding assay, Kip1 is plus-end directed. The bi-directionality and plus-end tracking activity of Kip1, properties revealed here for the first time, allow Kip1 to perform its multiple functions in mitotic spindle dynamics and to partition the 2-micron plasmid.

Coupling of kinesin ATP turnover to translocation and microtubule regulation: one engine, many machines

The cycle of ATP turnover is integral to the action of motor proteins. Here we discuss how variation in this cycle leads to variation of function observed amongst members of the kinesin superfamily of microtubule associated motor proteins. Variation in the ATP turnover cycle among superfamily members can tune the characteristic kinesin motor to one of the range of microtubule-based functions performed by kinesins. The speed at which ATP is hydrolysed affects the speed of translocation. The ratio of rate constants of ATP turnover in relation to association and dissociation from the microtubule influence the processivity of translocation. Variation in the rate-limiting step of the cycle can reverse the way in which the motor domain interacts with the microtubule producing non-motile kinesins. Because the ATP turnover cycle is not fully understood for the majority of kinesins, much work remains to show how the kinesin engine functions in such a wide variety of molecular machines.

Regulation of microtubule dynamics by kinesins

The simple mechanistic and functional division of the kinesin family into either active translocators or non-motile microtubule depolymerases was initially appropriate but is now proving increasingly unhelpful, given evidence that several translocase kinesins can affect microtubule dynamics, whilst non-translocase kinesins can promote microtubule assembly and depolymerisation. Such multi-role kinesins act either directly on microtubule dynamics, by interaction with microtubules and tubulin, or indirectly, through the transport of other factors along the lattice to the microtubule tip. Here I review recent progress on the mechanisms and roles of these translocase kinesins.

Insight into the molecular mechanism of the multitasking kinesin-8 motor

Members of the kinesin-8 motor class have the remarkable ability to both walk towards microtubule plus-ends and depolymerise these ends on arrival, thereby regulating microtubule length. To analyse how kinesin-8 multitasks, we studied the structure and function of the kinesin-8 motor domain. We determined the first crystal structure of a kinesin-8 and used cryo-electron microscopy to calculate the structure of the microtubule-bound motor. Microtubule-bound kinesin-8 reveals a new conformation compared with the crystal structure, including a bent conformation of the α4 relay helix and ordering of functionally important loops. The kinesin-8 motor domain does not depolymerise stabilised microtubules with ATP but does form tubulin rings in the presence of a non-hydrolysable ATP analogue. This shows that, by collaborating, kinesin-8 motor domain molecules can release tubulin from microtubules, and that they have a similar mechanical effect on microtubule ends as kinesin-13, which enables depolymerisation. Our data reveal aspects of the molecular mechanism of kinesin-8 motors that contribute to their unique dual motile and depolymerising functions, which are adapted to control microtubule length.

The microtubule network and neuronal morphogenesis: Dynamic and coordinated orchestration through multiple players

Nervous system function and plasticity rely on the complex architecture of neuronal networks elaborated during development, when neurons acquire their specific and complex shape. During neuronal morphogenesis, the formation and outgrowth of functionally and structurally distinct axons and dendrites require a coordinated and dynamic reorganization of the microtubule cytoskeleton involving numerous regulators. While most of these factors act directly on microtubules to stabilize them or promote their assembly, depolymerization or fragmentation, others are now emerging as essential regulators of neuronal differentiation by controlling tubulin availability and modulating microtubule dynamics. In this review, we recapitulate how the microtubule network is actively regulated during the successive phases of neuronal morphogenesis, and what are the specific roles of the various microtubule-regulating proteins in that process. We then describe the specific signaling pathways and inter-regulations that coordinate the different activities of these proteins to sustain neuronal development in response to environmental cues.

Formins and microtubules

Formins have recently been recognized as prominent regulators of the microtubule (MT) cytoskeleton where they modulate the dynamics of selected MTs in interphase and mitosis. The association of formins with the MT cytoskeleton and their action on MT dynamics are relatively unexplored areas, yet growing evidence supports a direct role in their regulation of MT stability independent of their activity on actin. Formins regulate MT stability alone or in combination with accessory MT binding proteins that have previously been implicated in the stabilization of MTs downstream of polarity cues. As actin and MT arrays are typically remodeled downstream of signaling pathways that orchestrate cell shape and division, formins are emerging as excellent candidates for coordinating the responses of the cytoskeletal in diverse regulated and homeostatic processes.

Visualisation of a kinesin-13 motor on microtubule end mimics

An expanding collection of proteins localises to microtubule ends to regulate cytoskeletal dynamics and architecture by unknown molecular mechanisms. Electron microscopy is invaluable for studying microtubule structure, but because microtubule ends are heterogeneous, their structures are difficult to determine. We therefore investigated whether tubulin oligomers induced by the drug dolastatin could mimic microtubule ends. The microtubule end-dependent ATPase of kinesin-13 motors is coupled to microtubule depolymerisation. Significantly, kinesin-13 motor ATPase activity is stimulated by dolastatin-tubulin oligomers, suggesting, first, that these oligomers share properties with microtubule ends and, second, that the physical presence of an end is less important than terminal tubulin flexibility for microtubule end recognition by the kinesin-13 motor. Using electron microscopy, we visualised the kinesin-13 motor-dolastatin-tubulin oligomer interaction in nucleotide states mimicking steps in the ATPase cycle. This enabled us to detect conformational changes that the motor undergoes during depolymerisation. Our data suggest that such tubulin oligomers can be used to examine other microtubule end-binding proteins.

Lucky 13-microtubule depolymerisation by kinesin-13 motors

The kinesin-13 class of motors catalyses microtubule depolymerisation by bending tubulins at microtubule ends. Depolymerisation activity is intrinsic to the kinesin-13 motor core but the activity of the core alone is very low compared with that of constructs that also contain a conserved neck sequence. The full-length dimeric motor is an efficient depolymeriser and also diffuses along the microtubule lattice, which helps it to find microtubule ends. Current evidence supports the idea of a generic mechanism for kinesin-13-catalysed depolymerisation. However, the activity of kinesin-13 motors is precisely localised and regulated in vivo to enable a wide range of cellular roles. The proteins are involved in global control of microtubule dynamics. They also localise to mitotic and meiotic spindles, where they contribute to formation and maintenance of spindle bipolarity, chromosomal congression, attachment correction and chromatid separation. In interphase cells, intricate and subtle mechanisms appear to allow kinesin-13 motors to act on specific populations of microtubules. Such carefully controlled localisation and regulation makes these kinesins efficient, multi-tasking molecular motors.

Kinesin-13s form rings around microtubules

Kinesin is a superfamily of motor proteins that uses the energy of adenosine triphosphate hydrolysis to move and generate force along microtubules. A notable exception to this general description is found in the kinesin-13 family that actively depolymerizes microtubules rather than actively moving along them. This depolymerization activity is important in mitosis during chromosome segregation. It is still not fully clear by which mechanism kinesin-13s depolymerize microtubules. To address this issue, we used electron microscopy to investigate the interaction of kinesin-13s with microtubules. Surprisingly, we found that proteins of the kinesin-13 family form rings and spirals around microtubules. This is the first report of this type of oligomeric structure for any kinesin protein. These rings may allow kinesin-13s to stay at the ends of microtubules during depolymerization.

Distinct roles of doublecortin modulating the microtubule cytoskeleton

Doublecortin is a neuronal microtubule-stabilising protein, mutations of which cause mental retardation and epilepsy in humans. How doublecortin influences microtubule dynamics, and thereby brain development, is unclear. We show here by video microscopy that purified doublecortin has no effect on the growth rate of microtubules. However, it is a potent anti-catastrophe factor that stabilises microtubules by linking adjacent protofilaments and counteracting their outward bending in depolymerising microtubules. We show that doublecortin-stabilised microtubules are substrates for kinesin translocase motors and for depolymerase kinesins. In addition, doublecortin does not itself oligomerise and does not bind to tubulin heterodimers but does nucleate microtubules. In cells, doublecortin is enriched at the distal ends of neuronal processes and our data raise the possibility that the function of doublecortin in neurons is to drive assembly and stabilisation of non-centrosomal microtubules in these doublecortin-enriched distal zones. These distinct properties combine to give doublecortin a unique function in microtubule regulation, a role that cannot be compensated for by other microtubule-stabilising proteins and nucleating factors.

Cik1 targets the minus-end kinesin depolymerase kar3 to microtubule plus ends

Kar3, a Saccharomyces cerevisiae Kinesin-14, is essential for karyogamy and meiosis I but also has specific functions during vegetative growth. For its various roles, Kar3 forms a heterodimer with either Cik1 or Vik1, both of which are noncatalytic polypeptides. Here, we present the first biochemical characterization of Kar3Cik1, the kinesin motor that is essential for karyogamy. Kar3Cik1 depolymerizes microtubules from the plus end and promotes robust minus-end-directed microtubule gliding. Immunolocalization studies show that Kar3Cik1 binds preferentially to one end of the microtubule, whereas the Kar3 motor domain, in the absence of Cik1, exhibits significantly higher microtubule lattice binding. Kar3Cik1-promoted microtubule depolymerization requires ATP turnover, and the kinetics fit a single exponential function. The disassembly mechanism is not microtubule catastrophe like that induced by the MCAK Kinesin-13s. Soluble tubulin does not activate the ATPase activity of Kar3Cik1, and there is no evidence of Kar3Cik1(.)tubulin complex formation as observed for MCAK. These results reveal a novel mechanism to regulate microtubule depolymerization. We propose that Cik1 targets Kar3 to the microtubule plus end. Kar3Cik1 then uses its minus-end-directed force to depolymerize microtubules from the plus end, with each tubulin-subunit release event tightly coupled to one ATP turnover.

Full-length dimeric MCAK is a more efficient microtubule depolymerase than minimal domain monomeric MCAK

MCAK belongs to the Kinesin-13 family, whose members depolymerize microtubules rather than translocate along them. We defined the minimal functional unit of MCAK as the catalytic domain plus the class specific neck (MD-MCAK), which is consistent with previous reports. We used steady-state ATPase kinetics, microtubule depolymerization assays, and microtubule.MCAK cosedimentation assays to compare the activity of full-length MCAK, which is a dimer, with MD-MCAK, which is a monomer. Full-length MCAK exhibits higher ATPase activity, more efficient microtubule end binding, and reduced affinity for the tubulin heterodimer. Our studies suggest that MCAK dimerization is important for its catalytic cycle by promoting MCAK binding to microtubule ends, enhancing the ability of MCAK to recycle for multiple rounds of microtubule depolymerization, and preventing MCAK from being sequestered by tubulin heterodimers.

Klp67A destabilises pre-anaphase microtubules but subsequently is required to stabilise the central spindle

Klp67A is a member of the Kip3 subfamily of microtubule destabilising kinesins, the loss of which results in abnormally long and stable pre-anaphase microtubules. Here we examine its role during cytokinesis in Drosophila primary spermatocytes that require the coordinated interaction of an interior and peripheral set of central spindle microtubules. In mutants anaphase B spindles elongated with normal kinetics but bent towards the cortex. Both peripheral and interior spindle microtubules then formed diminished bundles of abnormally positioned central spindle microtubules associated with the pavarotti-KLP and KLP3A motor proteins. The minus ends of these were poorly aligned as revealed by Asp protein localisation. Furrows always initiated at the sites of central spindle bundles but could be unilateral or nonequatorially positioned. Ectopic furrows were stimulated by the interior central spindle and formed only after this structure buckled and contacted the cortex. Furrows often halted and regressed as they could not be sustained by the central spindles that became increasing unstable over time and often completely degraded. Consistent with this, actin and anillin failed to form homogenous bands. Thus, the Klp67A microtubule catastrophe factor is required for cytokinesis by regulating both the formation and stability of the central spindle.

Drosophila Klp67A is required for proper chromosome congression and segregation during meiosis I

Drosophila Klp67A belongs to the Kip3 subfamily of Kinesin-type microtubule catastrophe factors. In primary spermatocytes, loss of klp67A leads to defects in karyokinesis and cytokinesis. We show that these cells formed disorganised, bipolar spindles that contained increased numbers of microtubules. The kinetochore fibres were wavy and bent, whereas astral microtubules appeared abnormally robust and formed cortical bundles. Time-lapse studies revealed that during biorientation, the chromosomes in klp67A mutant cells continued to reorient for about twice as long as those in control cells. Metaphase plates were poorly defined in the mutants and often formed at non-equatorial positions. Consistent with the above abnormalities in chromosome congression, we found that in wild-type cells Klp67A associated with prometaphase/metaphase kinetochores before redistributing to the central spindle at anaphase onset. Although the timing of this redistribution of kinetochores argues against a role in anaphase chromosome segregation, dyads in the mutants disjoined but exhibited greatly diminished poleward velocities. They travelled on average at approximately 34% of the velocity of their wild-type counterparts and often decondensed at non-polar locations. Hypomorphic mutations of klp67A may lead to segregation defects.

C-terminus of mitotic centromere-associated kinesin (MCAK) inhibits its lattice-stimulated ATPase activity

Mitotic centromere-associated kinesin (MCAK) is a microtubule (MT)-destabilizing molecular motor. In the present study we show that the final 8 amino acids of the C-terminus of MCAK inhibit lattice-stimulated ATPase activity of the motor. Surprisingly, loss of this C-terminal 'tail' (MCAK-Q710) leads to more rapid depolymerization of MTs relative to full-length MCAK (wt-MCAK). Biochemical and microscopic assays revealed that MCAK-Q710 bound to the MT lattice with higher apparent affinity as compared with wt-MCAK. End-stimulated depolymerization was similar for both enzymes. These data suggest that lattice-bound MCAK can increase the rate of MT depolymerization, but at an energy cost. The function of the C-terminus of MCAK may be to selectively inhibit lattice-stimulated ATPase activity, resulting in limited interactions of the motor with the MT lattice. This increases the coupling between ATP hydrolysis and tubulin dimer release, but it also limits MT depolymerization.

The mechanism, function and regulation of depolymerizing kinesins during mitosis

Kinesins are motor proteins that use the hydrolysis of ATP to do mechanical work. Most of these motors translocate cargo along the surface of the microtubule (MT). However, a subfamily of these motors (Kin-I kinesins) can destabilize MTs directly from their ends. This distinct ability makes their activity crucial during mitosis, when reordering of the MT cytoskeleton is most evident. Recently, much work has been done to elucidate the structure and mechanism of depolymerizing kinesins, particularly those of the mammalian kinesin mitotic centromere-associated kinesin (MCAK). In addition, new regulatory factors have been discovered that shed light on the regulation and precise role of Kin-I kinesins during mitosis.

MCAK, a Kin I kinesin, increases the catastrophe frequency of steady-state HeLa cell microtubules in an ATP-dependent manner in vitro

Mitotic-centromere-associated kinesin (MCAK) is a member of the KIN I (internal motor domain) subfamily of kinesin related proteins. MCAK and its homologues destabilize microtubules both in cells and in vitro. Here, we analyzed the effects of MCAK in the presence and absence of ATP on the dynamic instability behavior of steady state microtubules assembled from purified HeLa cell tubulin. In the presence of ATP, substoichiometric levels of full length MCAK and a segment (A182) consisting of the motor and neck domains strongly increased the catastrophe frequency of the microtubules. These data demonstrate that MCAK is a microtubule-catastrophe promoting factor in vitro, and support the hypothesis that MCAK may serve as a catastrophe-promoting factor in cells.

Mechanism of Microtubule Stabilization by Doublecortin

Neurons undertake an amazing journey from the center of the developing mammalian brain to the outer layers of the cerebral cortex. Doublecortin, a component of the microtubule cytoskeleton, is essential in postmitotic neurons and was identified because its mutation disrupts human brain development. Doublecortin stabilizes microtubules and stimulates their polymerization but has no homology with other MAPs. We used electron microscopy to characterize microtubule binding by doublecortin and visualize its binding site. Doublecortin binds selectively to 13 protofilament microtubules, its in vivo substrate, and also causes preferential assembly of 13 protofilament microtubules. This specificity was explained when we found that doublecortin binds between the protofilaments from which microtubules are built, a previously uncharacterized binding site that is ideal for microtubule stabilization. These data reveal the structural basis for doublecortin's binding selectivity and provide insight into its role in maintaining microtubule architecture in maturing neurons.

A common mechanism for microtubule destabilizers-M type kinesins stabilize curling of the protofilament using the class-specific neck and loops

Unlike other kinesins, middle motor domain-type kinesins depolymerize the microtubule from its ends. To elucidate its mechanism, we solved the X-ray crystallographic structure of KIF2C, a murine member of this family. Three major class-specific features were identified. The class-specific N-terminal neck adopts a long and rigid helical structure extending out vertically into the interprotofilament groove. This structure explains its dual roles in targeting to the end of the microtubule and in destabilization of the lateral interaction of the protofilament. The loop L2 forms a unique finger-like structure, long and rigid enough to reach the next tubulin subunit to stabilize the peeling of the protofilament. The open conformation of the switch I loop could be reversed by the shift of the microtubule binding L8 loop, suggesting its role as the sensor to trigger ATP hydrolysis. Mutational analysis supports these structural implications.

Catastrophic kinesins: piecing together their mechanism by 3D reconstruction

Kin Is, kinesins with an internal catalytic domain, de-polymerize microtubules from both ends, and the KIF2C crystal structure presented by ([this issue of Cell]) provides provocative evidence to support the theory that the highly conserved sequences are critical structural elements in these catastrophic kinesins.

Structure of a kinesin microtubule depolymerization machine

With their ability to depolymerize microtubules (MTs), KinI kinesins are the rogue members of the kinesin family. Here we present the 1.6 A crystal structure of a KinI motor core from Plasmodium falciparum, which is sufficient for depolymerization in vitro. Unlike all published kinesin structures to date, nucleotide is not present, and there are noticeable differences in loop regions L6 and L10 (the plus-end tip), L2 and L8 and in switch II (L11 and helix4); otherwise, the pKinI structure is very similar to previous kinesin structures. KinI-conserved amino acids were mutated to alanine, and studied for their effects on depolymerization and ATP hydrolysis. Notably, mutation of three residues in L2 appears to primarily affect depolymerization, rather than general MT binding or ATP hydrolysis. The results of this study confirm the suspected importance of loop 2 for KinI function, and provide evidence that KinI is specialized to hydrolyze ATP after initiating depolymerization.