Photostimulated thermoluminescence of Al2O3 (Si, Ti) and its application to ultraviolet radiation dosimetry

X-ray Visualization and Quantification Using Fibrous Color Dosimeter Based on Leuco Dye

A polystyrene (PS)-based fibrous color dosimeter, comprising a color former based on 2-(phenylamino)-6-(dipentylamino)-3-methylspiro[9H-xanthene-9,3′-phthalide] (Black305) fluoran leuco dye and a 2-(4-methoxystyryl)-4,6-bis(trichloromethyl)-1,3,5-triazine (MBTT) photoacid generator, was developed for visual detection of X-ray doses of 15 Gy and higher. The composite fiber was produced by using a centrifugal spinning method, and the obtained composite fiber exhibited a stable and uniform morphology with a fiber diameter of 10 μm or less and had sufficient mechanical strength. As an example of practical application, we successfully processed the composite fiber into an apron and clearly and visually confirmed that the color change from yellow to black occurs on the surface of the fabric under X-ray exposure.

Study of stabilizing CaF2:Dy ultraviolet sensitivity by double annealing treatment

The intrinsic thermoluminescent response to ultraviolet radiation of CaF2:Dy phosphor is enhanced by pre-irradiation high-temperature annealing treatment. The thermoluminescent response is stabilized by adding a medium temperature annealing treatment after the previous annealing. The experimental results show that the annealing treatment of 1 h 850 degrees C high-temperature annealing followed by 1 h 350 degrees C medium-temperature annealing is the optimum treatment to have high thermoluminescent response and good stability. The results also show that (1) the thermoluminescent response to 253.7 nm ultraviolet radiation is increased and stabilized, (2) the thermoluminescent sensitivity and glow curve distribution to 235.7 nm ultraviolet radiation are retained, and (3) the thermoluminescent response to 253.7 nm ultraviolet is linear from 3 to 1 x 10(3) Jm(-2), but there is no linear response with respect to 365 nm ultraviolet.