Quality assurance of stereotactic alignment and patient positioning mechanical accuracy for robotized Gamma Knife radiosurgery

Total workflow uncertainty of frameless radiosurgery with the Gamma Knife Icon cone-beam computed tomography

Objective

Frameless treatment with the Gamma Knife Icon is still relatively new as a treatment option. As a result, additional confidence/knowledge about the uncertainty that exists within each portion of the treatment workflow could be gained especially regarding steps that have not been previously studied in the literature.

Methods

The Icon base delivery device (Perfexion) uncertainty is quantified and validated. The novel portions of the Icon such as mask immobilization, cone‐beam computed tomography image guidance, and the intrafraction motion management methods are studied specifically and to a greater extent to determine a total workflow uncertainty of frameless treatment with the Icon.

Results

The uncertainty of each treatment workflow step has been identified with the total workflow uncertainty being identified in this work as 1.3 mm with a standard deviation of 0.51 mm.

Conclusion

The total uncertainty of frameless treatment with the Icon has been evaluated and this data may indicate the need for setup margin in this setting with data that could be used by other institutions to calculate needed setup margin per their preferred recipe after validation of this data in their context.

In phantom evaluation of targeting accuracy in MRI-based brain radiosurgery

PURPOSE

To determine the targeting accuracy of brain radiosurgery when planning procedures employing different MRI and MRI + CT combinations are adopted.

MATERIALS AND METHOD

A new phantom, the BrainTool, has been designed and realized to test image co-registration and targeting accuracy in a realistic anatomical situation. The phantom was created with a 3D printer and materials that mimic realistic brain MRI and CT contrast using a model extracted from a synthetic MRI study of a human brain. Eight markers distributed within the BrainTool provide for assessment of the accuracy of image registrations while two cavities that host an ionization chamber are used to perform targeting accuracy measurements with an iterative cross-scan method. Two procedures employing 1.5 T MRI-only or a combination of MRI (taken with 1.5 T or 3 T scanners) and CT to carry out Gamma Knife treatments were investigated. As distortions can impact targeting accuracy, MR images were preliminary evaluated to assess image deformation extent using GammaTool phantom.

RESULTS

MR images taken with both scanners showed average and maximum distortion of 0.3 mm and 1 mm respectively. The marker distances in co-registered images resulted below 0.5 mm for both MRI scans. The targeting mismatches obtained were 0.8 mm, 1.0 mm and 1.2 mm for MRI-only and MRI + CT (1,5T and 3 T), respectively.

CONCLUSIONS

Procedures using a combination of MR and CT images provide targeting accuracies comparable to those of MRI-only procedures. The BrainTool proved to be a suitable tool for carrying out co-registration and targeting accuracy of Gamma Knife brain radiosurgery treatments.

Technological quality requirements for stereotactic radiotherapy : Expert review group consensus from the DGMP Working Group for Physics and Technology in Stereotactic Radiotherapy

This review details and discusses the technological quality requirements to ensure the desired quality for stereotactic radiotherapy using photon external beam radiotherapy as defined by the DEGRO Working Group Radiosurgery and Stereotactic Radiotherapy and the DGMP Working Group for Physics and Technology in Stereotactic Radiotherapy. The covered aspects of this review are 1) imaging for target volume definition, 2) patient positioning and target volume localization, 3) motion management, 4) collimation of the irradiation and beam directions, 5) dose calculation, 6) treatment unit accuracy, and 7) dedicated quality assurance measures. For each part, an expert review for current state-of-the-art techniques and their particular technological quality requirement to reach the necessary accuracy for stereotactic radiotherapy divided into intracranial stereotactic radiosurgery in one single fraction (SRS), intracranial fractionated stereotactic radiotherapy (FSRT), and extracranial stereotactic body radiotherapy (SBRT) is presented. All recommendations and suggestions for all mentioned aspects of stereotactic radiotherapy are formulated and related uncertainties and potential sources of error discussed. Additionally, further research and development needs in terms of insufficient data and unsolved problems for stereotactic radiotherapy are identified, which will serve as a basis for the future assignments of the DGMP Working Group for Physics and Technology in Stereotactic Radiotherapy. The review was group peer-reviewed, and consensus was obtained through multiple working group meetings.

Performance characterization of an integrated cone-beam CT system for dedicated gamma radiosurgery

PURPOSE

This work describes the performance characterization of a cone-beam CT-guided radiosurgery device, the Gamma Knife® Icon™.

METHODS

The performance tests have been categorized into: (a) image quality and mechanical integrity; (b) image coregistration fidelity; (c) adaptive treatment delivery quality; (d) high definition motion management performance characterization; (e) software communication performance testing of the integrated cone-beam CT (CBCT) system.

RESULTS

All image quality performance characterization satisfied or exceeded manufacturer specifications. The image quality and mechanical stability of the CBCT system over a 3-month period was within tolerance with negligible (<0.1°) detector tilt angle. The CBCT definition of the stereotactic space had a measured average discrepancy of 0.15-0.16 mm in x, y, and z directions. On average, the high definition motion management system performance was within 0.05 mm with a residual offset of 0.15 mm when large displacements in a given direction were taken. The adaptive treatment delivery component as measured with CBCT coregistration of daily setups against reference setup images was accurate to within 0.2°. Comprehensive end-to-end testing showed a total uncertainty of better than 0.2 mm in positioning and 0.4% in dosimetry for treatment of centrally located lesions.

CONCLUSIONS

A set of system performance characterization tests spanning all aspects of the Gamma Knife Icon are presented. Overall, the system performance was in line with manufacturer specifications.

Stereotactic radiosurgery of glomus jugulare tumors: current concepts, recent advances and future perspectives

Stereotactic radiosurgery (SRS), a very highly focused form of therapeutic irradiation, has been widely recognized as a viable treatment option in the management of intracranial pathologies including benign tumors, malign tumors, vascular malformations and functional disorders. The applications of SRS are continuously expanding thanks to the ever-increasing advances and corresponding improvements in neuroimaging, radiation treatment techniques, equipment, treatment planning and delivery systems. In the context of glomus jugulare tumors (GJT), SRS is being more increasingly used both as the upfront management modality or as a complementary or salvage treatment option. As its safety and efficacy is being evident with compiling data from studies with longer follow-up durations, SRS appears to take the lead in the management of most patients with GJT. Herein, we address current concepts, recent advances and future perspectives in SRS of GJT in light of the literature.