On the Propagation of High Frequency Compressional Waves in Isotropic Cylinders

Catalytic activity of acid and base with different concentration on sol-gel kinetics of silica by ultrasonic method

The effects of both acid (acetic acid) and base (ammonia) catalysts in varying on the sol-gel synthesis of SiO2 nanoparticles using tetra ethyl ortho silicate (TEOS) as a precursor was determined by ultrasonic method. The ultrasonic velocity was received by pulsar receiver. The ultrasonic velocity in the sol and the parameter ΔT (time difference between the original pulse and first back wall echo of the sol) was varied with time of gelation. The graphs of ln[ln1/ΔT] vs ln(t), indicate two region - nonlinear region and a linear region. The time corresponds to the point at which the non-linear region change to linear region is considered as gel time for the respective solutions. Gelation time is found to be dependent on the concentration and types of catalyst and is found from the graphs based on Avrami equation. The rate of condensation is found to be faster for base catalyst. The gelation process was also characterized by viscosity measurement. Normal sol-gel process was also carried out along with the ultrasonic one to compare the effectiveness of ultrasonic. The silica gel was calcined and the powdered sample was characterized with scanning electron microscopy, energy dispersive spectra, X-ray diffractogram, and FTIR spectroscopy.

Correction for partial reflection in ultrasonic attenuation measurements using contact transducers

This research investigates the influence of partial reflection on the measurement of the absolute ultrasonic attenuation coefficient using contact transducers. The partial, frequency-dependent reflection arises from the thin fluid-layer interface formed between the transducer and specimen surface. It is experimentally shown that neglecting this reflection effect leads to a significant overestimation in the measured attenuation coefficient. A systematic measurement procedure is proposed that simultaneously obtains the ultrasonic signals needed to calculate both the reflection coefficient of the interface and the attenuation coefficient, without disturbing the existing coupling conditions. The true attenuation coefficient includes a correction based on the measured reflection coefficient--this is called the reflection correction. It is shown that including the reflection correction also reduces the variation (random error) in the measured attenuation coefficient. The accuracy of the proposed method is demonstrated for a material with a known attenuation coefficient. The proposed method is then used to measure the high attenuation coefficient of a cement-based material.