Detection of urea-induced internal denaturation of dsDNA using solid-state nanopores

Nested Phosphorothioated Hybrid Primer-Mediated Isothermal Amplification for Specific and Dye-Based Subattomolar Nucleic Acid Detection at Low Temperatures

Developing dye-based isothermal nucleic acid amplification (INAA) at low temperatures such as 37 °C remains a technical challenge. Here, we describe a nested phosphorothioated (PS) hybrid primer-mediated isothermal amplification (NPSA) assay which only utilizes EvaGreen (a DNA-binding dye) to achieve specific and dye-based subattomolar nucleic acid detection at 37 °C. The success of low-temperature NPSA essentially depends on employing Bacillus smithii DNA polymerase, a strand-displacing DNA polymerase with wide range of activation temperature. However, the NPSA's high efficiency entails nested PS-modified hybrid primers and the additives of urea and T4 Gene 32 Protein. To address the inhibition of urea on reverse transcription (RT), one-tube two-stage recombinase-aided RT-NPSA (rRT-NPSA) is established. By targeting human Kirsten rat sarcoma viral (KRAS) oncogene, NPSA (rRT-NPSA) stably detects 0.2 aM of KRAS gene (mRNA) within 90 (60) min. In addition, rRT-NPSA possesses subattomolar sensitivity to detect human ribosomal protein L13 mRNA. The NPSA/rRT-NPSA assays are also validated to obtain consistent results with PCR/RT-PCR methods on qualitatively detecting DNA/mRNA targets extracted from cultured cells and clinical samples. As a dye-based, low-temperature INAA method, NPSA inherently facilitates the development of miniaturized diagnostic biosensors.

Beyond nanopore sizing: improving solid-state single-molecule sensing performance, lifetime, and analyte scope for omics by targeting surface chemistry during fabrication

Solid-state nanopores (SSNs) are single-molecule resolution sensors with a growing footprint in real-time bio-polymer profiling-most prominently, but far from exclusively, DNA sequencing. SSNs accessibility has increased with the advent of controlled dielectric breakdown (CDB), but severe fundamental challenges remain: drifts in open-pore current and (irreversible) analyte sticking. These behaviors impede basic research and device development for commercial applications and can be dramatically exacerbated by the chemical complexity and physical property diversity of different analytes. We demonstrate a SSN fabrication approach attentive to nanopore surface chemistry during pore formation, and thus create nanopores in silicon nitride (SiN_x) capable of sensing a wide analyte scope-nucleic acid (double-stranded DNA), protein (holo-human serum transferrin) and glycan (maltodextrin). In contrast to SiN_x pores fabricated without this comprehensive approach, the pores are Ohmic in electrolyte, have extremely stable open-pore current during analyte translocation (>1 h) over a broad range of pore diameters ([Formula: see text]3- ∼30 nm) with spontaneous current correction (if current deviation occurs), and higher responsiveness (i.e. inter-event frequency) to negatively charged analytes (∼6.5 × in case of DNA). These pores were fabricated by modifying CDB with a chemical additive-sodium hypochlorite-that resulted in dramatically different nanopore surface chemistry including ∼3 orders of magnitude weaker K_a (acid dissociation constant of the surface chargeable head-groups) compared to CDB pores which is inextricably linked with significant improvements in nanopore performance with respect to CDB pores.

Single-Molecule Sensing Using Nanopores in Two-Dimensional Transition Metal Carbide (MXene) Membranes

Label-free nanopore technology for sequencing biopolymers such as DNA and RNA could potentially replace existing methods if improvements in cost, speed, and accuracy are achieved. Solid-state nanopores have been developed over the past two decades as physically and chemically versatile sensors that mimic biological channels, through which transport and sequencing of biomolecules have already been demonstrated. Of particular interest is the use of two-dimensional (2D) materials as nanopore substrates, since these can in theory provide the highest resolution readout (<1 nm of a biopolymer segment) and opportunities for electronic multiplexed readout through their interesting electronic properties. In this work, we report on nanopores comprising atomically thin flakes of 2D transition metal carbides called MXenes. We demonstrate a high-yield (60%), contamination-free, and alignment-free transfer method that involves their self-assembly at a liquid-liquid interface to large-scale (mm-sized) films composed of sheets, followed by nanopore fabrication using focused electron beams. Our work demonstrates the feasibility of MXenes, a class of hydrophilic 2D materials with over 20 compositions known to date, as nanopore membranes for DNA translocation and single-molecule sensing applications.

Effects of solvent quality and non-equilibrium conformations on polymer translocation

The conformation and its relaxation of a single polymer depend on solvent quality in a polymer solution: a polymer collapses into a globule in a poor solvent, while the polymer swells in a good solvent. When one translocates a polymer through a narrow pore, a drastic conformational change occurs such that the kinetics of the translocation is expected to depend on the solvent quality. However, the effects of solvent quality on the translocation kinetics have been controversial. In this study, we employ a coarse-grained model for a polymer and perform Langevin dynamics simulations for the driven translocation of a polymer in various types of solvents. We estimate the free energy of polymer translocation using steered molecular dynamics simulations and Jarzynski's equality and find that the free energy barrier for the translocation increases as the solvent quality becomes poorer. The conformational entropy contributes most to the free energy barrier of the translocation in a good solvent, while a balance between entropy and energy matters in a poor solvent. Interestingly, contrary to what is expected from the free energy profile, the translocation kinetics is a non-monotonic function of the solvent quality. We find that for any type of solvent, the polymer conformation stays far away from the equilibrium conformation during translocation due to an external force and tension propagation. However, the degree of tension propagation differs depending on the solvent quality as well as the magnitude of the external force: the tension propagation is more significant in a good solvent than in a poor solvent. We illustrate that such differences in tension propagation and non-equilibrium conformations between good and poor solvents are responsible for the complicated non-monotonic effects of solvent quality on the translocation kinetics.

Phosphorothioated Primers Lead to Loop-Mediated Isothermal Amplification at Low Temperatures

Loop-mediated isothermal amplification (LAMP) is an extremely powerful tool for the detection of nucleic acids with high sensitivity and specificity. However, LAMP shows optimal performance at around 65 °C, which limits applications in point-of-care-testing (POCT). Here, we have developed a version of LAMP that uses phosphorothioated primers (PS-LAMP) to enable more efficient hairpin formation and extension at the termini of growing concatamers, and that therefore works at much lower temperatures. By including additional factors such as chaotropes (urea) and single-stranded DNA binding protein (SSB), the sensitivities and selectivities for amplicon detection with PS-LAMP at 40 °C were comparable with a regular LAMP reaction at 65 °C.

Integrated solid-state nanopore platform for nanopore fabrication via dielectric breakdown, DNA-speed deceleration and noise reduction

The practical use of solid-state nanopores for DNA sequencing requires easy fabrication of the nanopores, reduction of the DNA movement speed and reduction of the ionic current noise. Here, we report an integrated nanopore platform with a nanobead structure that decelerates DNA movement and an insulating polyimide layer that reduces noise. To enable rapid nanopore fabrication, we introduced a controlled dielectric breakdown (CDB) process into our system. DNA translocation experiments revealed that single nanopores were created by the CDB process without sacrificing performance in reducing DNA movement speed by up to 10 μs/base or reducing noise up to 600 pA_rms at 1 MHz. Our platform provides the essential components for proceeding to the next step in the process of DNA sequencing.

Detection of a single enzyme molecule based on a solid-state nanopore sensor

The nanopore sensor as a high-throughput and low-cost technology can detect a single molecule in a solution. In the present study, relatively large silicon nitride (Si3N4) nanopores with diameters of ∼28 and ∼88 nm were fabricated successfully using a focused Ga ion beam. We have used solid-state nanopores with various sizes to detect the single horseradish peroxidase (HRP) molecule and for the first time analyzed single HRP molecular translocation events. In addition, a real-time monitored single enzyme molecular biochemical reaction and a translocation of the product of enzyme catalysis substrates were investigated by using a Si3N4 nanopore. Our nanopore system showed a high sensitivity in detecting single enzyme molecules and a real-time monitored single enzyme molecular biochemical reaction. This method could also be significant for studying gene expression or enzyme dynamics at the single-molecule level.

Deceleration of single-stranded DNA passing through a nanopore using a nanometre-sized bead structure

DNA sequencing with a solid-state nanopore requires a reduction of the translocation speeds of single-stranded DNA (ssDNA) over 10 μs/base. In this study, we report that a nanometre-sized bead structure constructed around a nanopore can reduce the moving speed of ssDNA to 270 μs/base by adjusting the diameter of the bead and its surface chemical group. This decelerating effect originates from the strong interaction between ssDNA and the chemical group on the surface of the bead. This nanostructure was simply prepared by dip coating in which a substrate with a nanopore was immersed in a silica bead solution and then dried in an oven. As compared with conventional approaches, our novel method is less laborious, simpler to perform and more effective in reducing ssDNA translocation speed.

Slowing single-stranded DNA translocation through a solid-state nanopore by decreasing the nanopore diameter

To slow the translocation of single-stranded DNA (ssDNA) through a solid-state nanopore, a nanopore was narrowed, and the effect of the narrowing on the DNA translocation speed was investigated. In order to accurately measure the speed, long (5.3 kb) ssDNA (namely, ss-poly(dA)) with uniform length (±0.4 kb) was synthesized. The diameters of nanopores fabricated by a transmission electron microscope were controlled by atomic-layer deposition. Reducing the nanopore diameter from 4.5 to 2.3 nm slowed down the translocation of ssDNA by more than 16 times (to 0.18 μs base(-1)) when 300 mV was applied across the nanopore. It is speculated that the interaction between the nanopore and the ssDNA dominates the translocation speed. Unexpectedly, the translocation speed of ssDNA through the 4.5 nm nanopore is more than two orders of magnitude higher than that of double-stranded DNA (dsDNA) through a nanopore of almost the same size. The cause of such a faster translocation of ssDNA can be explained by the weaker drag force inside the nanopore. Moreover, the measured translocation speeds of ssDNA and dsDNA agree well with those calculated by molecular-dynamics (MD) simulation. The MD simulation predicted that reducing the nanopore diameter to almost the same as that of ssDNA (i.e. 1.4 nm) decreases the translocation speed (to 1.4 μs base(-1)). Narrowing the nanopore is thus an effective approach for accomplishing nanopore DNA sequencing.

Automated fabrication of 2-nm solid-state nanopores for nucleic acid analysis

We demonstrate the automated and reproducible fabrication of sub-2-nm nanopores in 10-nm thick silicon nitride membranes, through controlled dielectric breakdown in solution. Our results reveal that under the appropriate conditions, nanopores can be fabricated with a size no larger than 2.0 ± 0.5-nm in diameter for a sample of N = 23 nanopores, with an average and standard deviation of 1.3 ± 0.6-nm. The dimensions of these nanopores are confirmed by using individual translocating DNA molecules as molecular rulers. We show that a 2.0-nm and a 2.1-nm diameter nanopore are capable of distinguishing single-stranded DNA versus double-stranded DNA, and that a 2.4-nm diameter nanopore can be used to investigate the overstretching transition in short dsDNA fragments. These results highlight the reliability and precision of the automated fabrication of nanopores via controlled dielectric breakdown, showing great promise for the manufacturing of future nanopore-based technologies.

Nanopores: A journey towards DNA sequencing

Much more than ever, nucleic acids are recognized as key building blocks in many of life's processes, and the science of studying these molecular wonders at the single-molecule level is thriving. A new method of doing so has been introduced in the mid 1990's. This method is exceedingly simple: a nanoscale pore that spans across an impermeable thin membrane is placed between two chambers that contain an electrolyte, and voltage is applied across the membrane using two electrodes. These conditions lead to a steady stream of ion flow across the pore. Nucleic acid molecules in solution can be driven through the pore, and structural features of the biomolecules are observed as measurable changes in the trans-membrane ion current. In essence, a nanopore is a high-throughput ion microscope and a single-molecule force apparatus. Nanopores are taking center stage as a tool that promises to read a DNA sequence, and this promise has resulted in overwhelming academic, industrial, and national interest. Regardless of the fate of future nanopore applications, in the process of this 16-year-long exploration, many studies have validated the indispensability of nanopores in the toolkit of single-molecule biophysics. This review surveys past and current studies related to nucleic acid biophysics, and will hopefully provoke a discussion of immediate and future prospects for the field.