Dynamic translocation of ligand-complexed DNA through solid-state nanopores with optical tweezers

Directly Characterizing the Capture Radius of Tethered Double-Stranded DNA by Single-Molecule Nanopipette Manipulation

The tethered molecule exhibits characteristics of both free and fixed states, with the electrodynamics involved in its diffusion, electrophoresis, and stretching processes still not fully understood. We developed a Single-Molecule Manipulation, Identification, and Length Examination (SMILE) system by integrating piezoelectric devices with nanopipettes. This system enabled successful capture and stretching of tethered double-stranded DNA within the nanopore. Our research unveiled distinct capture (rcapture) and stretch radii (rstretch) surrounding the DNA's anchor point. Notably, consistent ratios of capture radius for DNA of varying lengths (2k, 4k, and 6k base pairs) were observed across different capturing voltages, approximately 1:1.4:1.83, showing a resemblance to their gyration radius ratios. However, the ratios of stretch radius are consistent to their contour length (L0), with the stretching ratio (rstretch/L0) increasing from 70 to 90% as the voltage rose from 100 to 1000 mV. Additionally, through numerical simulations, we identified the origin of capture and stretch radii, determined by the entropic elasticity-induced capture barrier and the electric field-dominant escape barrier. This research introduces an innovative methodology and outlines research perspectives for a comprehensive exploration of the conformational, electrical, and diffusion characteristics of tethered molecules.

Aggregation and Oligomerization Characterization of ß-Lactoglobulin Protein Using a Solid-State Nanopore Sensor

Protein aggregation is linked to many chronic and devastating neurodegenerative human diseases and is strongly associated with aging. This work demonstrates that protein aggregation and oligomerization can be evaluated by a solid-state nanopore method at the single molecule level. A silicon nitride nanopore sensor was used to characterize both the amyloidogenic and native-state oligomerization of a model protein ß-lactoglobulin variant A (βLGa). The findings from the nanopore measurements are validated against atomic force microscopy (AFM) and dynamic light scattering (DLS) data, comparing βLGa aggregation from the same samples at various stages. By calibrating with linear and circular dsDNA, this study estimates the amyloid fibrils' length and diameter, the quantity of the βLGa aggregates, and their distribution. The nanopore results align with the DLS and AFM data and offer additional insight at the level of individual protein molecular assemblies. As a further demonstration of the nanopore technique, βLGa self-association and aggregation at pH 4.6 as a function of temperature were measured at high (2 M KCl) and low (0.1 M KCl) ionic strength. This research highlights the advantages and limitations of using solid-state nanopore methods for analyzing protein aggregation.

Pulling a folded polymer through a nanopore

We investigate the translocation dynamics of a folded linear polymer which is pulled through a nanopore by an external force. To this end, we generalize the iso-flux tension propagation theory for end-pulled polymer translocation to include the case of two segments of the folded polymer traversing simultaneously trough the pore. Our theory is extensively benchmarked with corresponding molecular dynamics (MD) simulations. The translocation process for a folded polymer can be divided into two main stages. In the first stage, both branches are traversing the pore and their dynamics is coupled. If the branches are not of equal length, there is a second stage where translocation of the shorter branch has been completed. Using the assumption of equal monomer flux of both branches confirmed by MD simulations, we analytically derive the equations of motion for both branches and characterize the translocation dynamics in detail from the average waiting time and its scaling form.

Estimating RNA Polymerase Protein Binding Sites on λ DNA Using Solid-State Nanopores

In this work, using a silicon nitride nanopore based device, we measure the binding locations of RNA Polymerase (RNAP) on 48.5 kbp (16.5 μm) long λ DNA. To prevent the separation of bound RNAPs from a λ DNA molecule in the high electric field inside a nanopore, we cross-linked RNAP proteins to λ DNA by formaldehyde. We compare the current blockage event data measured with a mixture of λ DNA and RNAP under cross-link conditions with our control samples: RNAP, λ DNA, RNAP, and λ DNA incubated in formaldehyde separately and in a mixture. By analyzing the time durations and amplitudes of current blockage signals of events and their subevents, as well as subevent starting times, we can estimate the binding efficiency and locations of RNAPs on a λ DNA. Our data analysis shows that under the conditions of our experiment with the ratio of 6 to 1 for RNAP to λ DNA molecules, the probability of an RNAP molecule to bind a λ DNA is ∼42%, and that RNAP binding has a main peak at 3.51 μm ± 0.53 μm, most likely corresponding to the two strong promoter regions at 3.48 and 4.43 μm of λ DNA. However, individual RNAP binding sites were not distinguished with this nanopore setup. This work brings out new perspectives and complications to study transcription factor RNAP binding at various positions on very long DNA molecules.

Reducing the variance in the translocation times by prestretching the polymer

Langevin dynamics simulations of polymer translocation are performed where the polymer is stretched via two opposing forces applied on the first and last monomer before and during translocation. In this setup, polymer translocation is achieved by imposing a bias between the two pulling forces such that there is net displacement towards the trans side. Under the influence of stretching forces, the elongated polymer ensemble contains less variations in conformations compared to an unstretched ensemble. Simulations demonstrate that this reduced spread in initial conformations yields a reduced variation in translocation times relative to the mean translocation time. This effect is explored for different ratios of the amplitude of thermal fluctuations to driving forces to control for the relative influence of the thermal path sampled by the polymer. Since the variance in translocation times is due to contributions coming from sampling both thermal noise and initial conformations, our simulations offer independent control over the two main sources of noise and allow us to shed light on how they both contribute to translocation dynamics. Simulation parameter space corresponding to experimentally relevant conditions is highlighted and shown to correspond to a significant decrease in the spread of translocation times, thus indicating that stretching DNA prior to translocation could assist nanopore-based sequencing and sizing applications.

Theory of pore-driven and end-pulled polymer translocation dynamics through a nanopore: an overview

We review recent progress on the theory of dynamics of polymer translocation through a nanopore based on the iso-flux tension propagation (IFTP) theory. We investigate both pore-driven translocation of flexible and a semi-flexible polymers, and the end-pulled case of flexible chains by means of the IFTP theory and extensive molecular dynamics (MD) simulations. The validity of the IFTP theory can be quantified by the waiting time distributions of the monomers which reveal the details of the dynamics of the translocation process. The IFTP theory allows a parameter-free description of the translocation process and can be used to derive exact analytic scaling forms in the appropriate limits, including the influence due to the pore friction that appears as a finite-size correction to asymptotic scaling. We show that in the case of pore-driven semi-flexible and end-pulled polymer chains the IFTP theory must be augmented with an explicit trans side friction term for a quantitative description of the translocation process.

Polymer translocation under a pulling force: Scaling arguments and threshold forces

DNA translocation through nanopores is one of the most promising strategies for next-generation sequencing technologies. Most experimental and numerical works have focused on polymer translocation biased by electrophoresis, where a pulling force acts on the polymer within the nanopore. An alternative strategy, however, is emerging, which uses optical or magnetic tweezers. In this case, the pulling force is exerted directly at one end of the polymer, which strongly modifies the translocation process. In this paper, we report numerical simulations of both linear and structured (mimicking DNA) polymer models, simple enough to allow for a statistical treatment of the pore structure effects on the translocation time probability distributions. Based on extremely extended computer simulation data, we (i) propose scaling arguments for an extension of the predicted translocation times τ∼N^{2}F^{-1} over the moderate forces range and (ii) analyze the effect of pore size and polymer structuration on translocation times τ.

Through a Window, Brightly: A Review of Selected Nanofabricated Thin-Film Platforms for Spectroscopy, Imaging, and Detection

We present a review of the use of selected nanofabricated thin films to deliver a host of capabilities and insights spanning bioanalytical and biophysical chemistry, materials science, and fundamental molecular-level research. We discuss approaches where thin films have been vital, enabling experimental studies using a variety of optical spectroscopies across the visible and infrared spectral range, electron microscopies, and related techniques such as electron energy loss spectroscopy, X-ray photoelectron spectroscopy, and single molecule sensing. We anchor this broad discussion by highlighting two particularly exciting exemplars: a thin-walled nanofluidic sample cell concept that has advanced the discovery horizons of ultrafast spectroscopy and of electron microscopy investigations of in-liquid samples; and a unique class of thin-film-based nanofluidic devices, designed around a nanopore, with expansive prospects for single molecule sensing. Free-standing, low-stress silicon nitride membranes are a canonical structural element for these applications, and we elucidate the fabrication and resulting features-including mechanical stability, optical properties, X-ray and electron scattering properties, and chemical nature-of this material in this format. We also outline design and performance principles and include a discussion of underlying material preparations and properties suitable for understanding the use of alternative thin-film materials such as graphene.

Single Molecule Localization and Discrimination of DNA-Protein Complexes by Controlled Translocation Through Nanocapillaries

Through the use of optical tweezers we performed controlled translocations of DNA-protein complexes through nanocapillaries. We used RNA polymerase (RNAP) with two binding sites on a 7.2 kbp DNA fragment and a dCas9 protein tailored to have five binding sites on λ-DNA (48.5 kbp). Measured localization of binding sites showed a shift from the expected positions on the DNA that we explained using both analytical fitting and a stochastic model. From the measured force versus stage curves we extracted the nonequilibrium work done during the translocation of a DNA-protein complex and used it to obtain an estimate of the effective charge of the complex. In combination with conductivity measurements, we provided a proof of concept for discrimination between different DNA-protein complexes simultaneous to the localization of their binding sites.

Studies of RNA Sequence and Structure Using Nanopores

Nanopores are powerful single-molecule sensors with nanometer scale dimensions suitable for detection, quantification, and characterization of nucleic acids and proteins. Beyond sequencing applications, both biological and solid-state nanopores hold great promise as tools for studying the biophysical properties of RNA. In this review, we highlight selected landmark nanopore studies with regards to RNA sequencing, microRNA detection, RNA/ligand interactions, and RNA structural/conformational analysis.

Relevance of the Drag Force during Controlled Translocation of a DNA-Protein Complex through a Glass Nanocapillary

Combination of glass nanocapillaries with optical tweezers allowed us to detect DNA-protein complexes in physiological conditions. In this system, a protein bound to DNA is characterized by a simultaneous change of the force and ionic current signals from the level observed for the bare DNA. Controlled displacement of the protein away from the nanocapillary opening revealed decay in the values of the force and ionic current. Negatively charged proteins EcoRI, RecA, and RNA polymerase formed complexes with DNA that experienced electrophoretic force lower than the bare DNA inside nanocapillaries. Force profiles obtained for DNA-RecA in our system were different than those in the system with nanopores in membranes and optical tweezers. We suggest that such behavior is due to the dominant impact of the drag force comparing to the electrostatic force acting on a DNA-protein complex inside nanocapillaries. We explained our results using a stochastic model taking into account the conical shape of glass nanocapillaries.

Nanopore sensing of individual transcription factors bound to DNA

Transcription factor (TF)-DNA interactions are the primary control point in regulation of gene expression. Characterization of these interactions is essential for understanding genetic regulation of biological systems and developing novel therapies to treat cellular malfunctions. Solid-state nanopores are a highly versatile class of single-molecule sensors that can provide rich information about local properties of long charged biopolymers using the current blockage patterns generated during analyte translocation, and provide a novel platform for characterization of TF-DNA interactions. The DNA-binding domain of the TF Early Growth Response Protein 1 (EGR1), a prototypical zinc finger protein known as zif268, is used as a model system for this study. zif268 adopts two distinct bound conformations corresponding to specific and nonspecific binding, according to the local DNA sequence. Here we implement a solid-state nanopore platform for direct, label- and tether-free single-molecule detection of zif268 bound to DNA. We demonstrate detection of single zif268 TFs bound to DNA according to current blockage sublevels and duration of translocation through the nanopore. We further show that the nanopore can detect and discriminate both specific and nonspecific binding conformations of zif268 on DNA via the distinct current blockage patterns corresponding to each of these two known binding modes.

Electrically facilitated translocation of protein through solid nanopore

Nanopores have been proven as versatile single-molecule sensors for individual unlabeled biopolymer detection and characterization. In the present work, a relative large nanopore with a diameter of about 60 nm has been used to detect protein translocation driven by a series of applied voltages. Compared with previous studied small nanopores, a distinct profile of protein translocation through a larger nanopore has been characterized. First, a higher threshold voltage is required to drive proteins into the large nanopore. With the increase of voltages, the capture frequency of protein into the nanopore has been markedly enhanced. And the distribution of current blockage events is characterized as a function of biased voltages. Due to the large dimension of the nanopore, the adsorption and desorption phenomenon of proteins observed with a prolonged dwell time has been weakened in our work. Nevertheless, the protein can still be stretched into an unfolded state by increased electric forces at high voltages. In consideration of the high throughput of the large nanopore, a couple of proteins passing through the nanopore simultaneously occur at high voltage. As a new feature, the feasibility and specificity of a nanopore with distinct geometry have been demonstrated for sensing protein translocation, which broadly expand the application of nanopore devices.

Video-based and interference-free axial force detection and analysis for optical tweezers

For measuring the minute forces exerted on single molecules during controlled translocation through nanopores with sub-piconewton precision, we have developed a video-based axial force detection and analysis system for optical tweezers. Since our detection system is equipped with a standard and versatile CCD video camera with a limited bandwidth offering operation at moderate light illumination with minimal sample heating, we integrated Allan variance analysis for trap stiffness calibration. Upon manipulating a microbead in the vicinity of a weakly reflecting surface with simultaneous axial force detection, interference effects have to be considered and minimized. We measured and analyzed the backscattering light properties of polystyrene and silica microbeads with different diameters and propose distinct and optimized experimental configurations (microbead material and diameter) for minimal light backscattering and virtually interference-free microbead position detection. As a proof of principle, we investigated the nanopore threading forces of a single dsDNA strand attached to a microbead with an overall force resolution of ±0.5 pN at a sample rate of 123 Hz.

Nanopores: A journey towards DNA sequencing

Much more than ever, nucleic acids are recognized as key building blocks in many of life's processes, and the science of studying these molecular wonders at the single-molecule level is thriving. A new method of doing so has been introduced in the mid 1990's. This method is exceedingly simple: a nanoscale pore that spans across an impermeable thin membrane is placed between two chambers that contain an electrolyte, and voltage is applied across the membrane using two electrodes. These conditions lead to a steady stream of ion flow across the pore. Nucleic acid molecules in solution can be driven through the pore, and structural features of the biomolecules are observed as measurable changes in the trans-membrane ion current. In essence, a nanopore is a high-throughput ion microscope and a single-molecule force apparatus. Nanopores are taking center stage as a tool that promises to read a DNA sequence, and this promise has resulted in overwhelming academic, industrial, and national interest. Regardless of the fate of future nanopore applications, in the process of this 16-year-long exploration, many studies have validated the indispensability of nanopores in the toolkit of single-molecule biophysics. This review surveys past and current studies related to nucleic acid biophysics, and will hopefully provoke a discussion of immediate and future prospects for the field.

Peroxiredoxins in plants and cyanobacteria

Peroxiredoxins (Prx) are central elements of the antioxidant defense system and the dithiol-disulfide redox regulatory network of the plant and cyanobacterial cell. They employ a thiol-based catalytic mechanism to reduce H2O2, alkylhydroperoxide, and peroxinitrite. In plants and cyanobacteria, there exist 2-CysPrx, 1-CysPrx, PrxQ, and type II Prx. Higher plants typically contain at least one plastid 2-CysPrx, one nucleo-cytoplasmic 1-CysPrx, one chloroplast PrxQ, and one each of cytosolic, mitochondrial, and plastidic type II Prx. Cyanobacteria express variable sets of three or more Prxs. The catalytic cycle consists of three steps: (i) peroxidative reduction, (ii) resolving step, and (iii) regeneration using diverse electron donors such as thioredoxins, glutaredoxins, cyclophilins, glutathione, and ascorbic acid. Prx proteins undergo major conformational changes in dependence of their redox state. Thus, they not only modulate cellular reactive oxygen species- and reactive nitrogen species-dependent signaling, but depending on the Prx type they sense the redox state, transmit redox information to binding partners, and function as chaperone. They serve in context of photosynthesis and respiration, but also in metabolism and development of all tissues, for example, in nodules as well as during seed and fruit development. The article surveys the current literature and attempts a mostly comprehensive coverage of present day knowledge and concepts on Prx mechanism, regulation, and function and thus on the whole Prx systems in plants.

Note: Direct force and ionic-current measurements on DNA in a nanocapillary

We have developed optical tweezers, with force measurements based on fast video tracking, for analysis and control of DNA translocation through nanocapillaries. Nanocapillaries are single-molecule biosensors with very similar characteristics to solid-state nanopores. Our novel experimental setup allows for ionic-current measurements in which the nanocapillary is oriented perpendicular to the trapping laser. Using video-based particle tracking, we are able to measure the position of DNA coated colloids at sub-millisecond resolution and in real-time. We present the first electrophoretic force and simultaneous ionic-current measurements of a single DNA molecule inside the orifice of a nanocapillary.

Controlling molecular transport through nanopores

Nanopores are emerging as powerful tools for the detection and identification of macromolecules in aqueous solution. In this review, we discuss the recent development of active and passive controls over molecular transport through nanopores with emphasis on biosensing applications. We give an overview of the solutions developed to enhance the sensitivity and specificity of the resistive-pulse technique based on biological and solid-state nanopores.

Peroxiredoxins in plants and cyanobacteria

Peroxiredoxins (Prx) are central elements of the antioxidant defense system and the dithiol-disulfide redox regulatory network of the plant and cyanobacterial cell. They employ a thiol-based catalytic mechanism to reduce H2O2, alkylhydroperoxide, and peroxinitrite. In plants and cyanobacteria, there exist 2-CysPrx, 1-CysPrx, PrxQ, and type II Prx. Higher plants typically contain at least one plastid 2-CysPrx, one nucleo-cytoplasmic 1-CysPrx, one chloroplast PrxQ, and one each of cytosolic, mitochondrial, and plastidic type II Prx. Cyanobacteria express variable sets of three or more Prxs. The catalytic cycle consists of three steps: (i) peroxidative reduction, (ii) resolving step, and (iii) regeneration using diverse electron donors such as thioredoxins, glutaredoxins, cyclophilins, glutathione, and ascorbic acid. Prx proteins undergo major conformational changes in dependence of their redox state. Thus, they not only modulate cellular reactive oxygen species- and reactive nitrogen species-dependent signaling, but depending on the Prx type they sense the redox state, transmit redox information to binding partners, and function as chaperone. They serve in context of photosynthesis and respiration, but also in metabolism and development of all tissues, for example, in nodules as well as during seed and fruit development. The article surveys the current literature and attempts a mostly comprehensive coverage of present day knowledge and concepts on Prx mechanism, regulation, and function and thus on the whole Prx systems in plants.