Fabrication and structural analysis of polyrotaxane fibers and films

Water-responsive supercontractile polymer films for bioelectronic interfaces

Connecting different electronic devices is usually straightforward because they have paired, standardized interfaces, in which the shapes and sizes match each other perfectly. Tissue-electronics interfaces, however, cannot be standardized, because tissues are soft1-3 and have arbitrary shapes and sizes4-6. Shape-adaptive wrapping and covering around irregularly sized and shaped objects have been achieved using heat-shrink films because they can contract largely and rapidly when heated7. However, these materials are unsuitable for biological applications because they are usually much harder than tissues and contract at temperatures higher than 90 °C (refs. 8,9). Therefore, it is challenging to prepare stimuli-responsive films with large and rapid contractions for which the stimuli and mechanical properties are compatible with vulnerable tissues and electronic integration processes. Here, inspired by spider silk10-12, we designed water-responsive supercontractile polymer films composed of poly(ethylene oxide) and poly(ethylene glycol)-α-cyclodextrin inclusion complex, which are initially dry, flexible and stable under ambient conditions, contract by more than 50% of their original length within seconds (about 30% per second) after wetting and become soft (about 100 kPa) and stretchable (around 600%) hydrogel thin films thereafter. This supercontraction is attributed to the aligned microporous hierarchical structures of the films, which also facilitate electronic integration. We used this film to fabricate shape-adaptive electrode arrays that simplify the implantation procedure through supercontraction and conformally wrap around nerves, muscles and hearts of different sizes when wetted for in vivo nerve stimulation and electrophysiological signal recording. This study demonstrates that this water-responsive material can play an important part in shaping the next-generation tissue-electronics interfaces as well as broadening the biomedical application of shape-adaptive materials.

Pressure-Sensitive Supramolecular Adhesives Based on Lipoic Acid and Biofriendly Dynamic Cyclodextrin and Polyrotaxane Cross-Linkers

Slide-ring materials are polymer networks with mobile cross-links that exhibit impressive stress dissipation and fracture resistance owing to the pulley effect. On account of their remarkable ability to dissipate the energy of deformation, these materials have found their way into advanced materials such as abrasion-resistant coatings and elastic battery electrode binders. In this work, we explore the role of mobile cross-links on the properties of a biofriendly pressure-sensitive adhesive made using composites of cyclodextrin-based macromolecules and poly(lipoic acid). We modify cyclodextrin-based hosts and polyrotaxanes with pendant groups of lipoic acid (a commonly ingested antioxidant) to incorporate them as cross-links in poly(lipoic acid) networks obtained by simple heating in open air. By systematically varying the adhesive formulations while probing their mechanical and adhesive properties, we uncover trends in structure-property relationships that enable one to tune network properties and access biofriendly, high-tack adhesives.

Optimization of Anisotropic Crystalline Structure of Molecular Necklace-like Polyrotaxane for Tough Piezoelectric Elastomer

While piezoelectric materials are applied in various fields, they generally exhibit poor mechanical toughness. To increase the applicability of these, their mechanical properties need to be improved. In this study, a tough piezoelectric polyrotaxane (PRX) elastomer was developed by blending PRX samples of two different lengths, formed using 10K and 35K poly(ethylene glycol), to align dipole moments for optimization of the piezoelectricity characteristics. The effects of the blending ratio on the crystalline structure of the obtained PRX elastomer were investigated by X-ray diffraction analysis and transmission electron microscopy. In addition, the ferroelectric and piezoelectric properties of the PRX elastomer were evaluated based on its polarization hysteresis loop and voltage generation characteristics, respectively. The PRX elastomer formed by using a ratio of 3:1 (ePR10k₇₅35k₂₅) exhibited a long-range-ordered anisotropic crystalline structure, resulting in a large polarization (P_r) value. As a result, ePR10k₇₅35k₂₅ showed greatly enhanced piezosensitivity against the mechanical vibrations generated by respiratory signals.

Anisotropic Amorphous X-ray Diffraction Attributed to the Orientation of Cyclodextrin

The beauty of cyclic molecules is reflected in their host-guest complexation reactions, as well as their unique X-ray diffraction patterns. Cyclodextrins, the longest known host molecules with rigid ring structures, show anisotropic X-ray diffraction characteristic of their single-molecule structure, rather than their intermolecular relationships. Amorphous derivatives of α-cyclodextrin exhibit broad and strong halo diffractions in the solid, melted, and dilute solution states. The diffraction angle corresponds to the intramolecular distance between neighboring glycosidic oxygen atoms located at the vertices of a regular hexagonal array. Because the hexagon is parallel to the aperture plane of the rigid cyclic molecule, the diffraction appears only in the direction parallel to this plane. The anisotropy was confirmed by stretching an amorphous thermoplastic polymer threaded through the inclusion cavities of a sequence of cyclodextrins. The resultant unique anisotropic X-ray diffraction suggests the possible use of rigid cyclic molecules as molecular orientation probes.

Polyrotaxane Glass: Peculiar Mechanics Attributable to the Isolated Dynamics of Different Components

The molecular dynamics of condensed polymers are directly linked to practically important mechanical properties, such as glass transition behavior and impact strength. We present a unique viscoelastic glass-forming polyrotaxane that is comprised of a main chain polymer and threaded cyclodextrins. The abnormally broad glass transition phase is attributed to the segment motion, which is unprecedentedly insusceptible to cooperative motion with neighboring chains until vitrification is completed. Even in the glass state, in which the cyclic components, occupying >80 wt % of the material, are vitrified, the main chain polymer retains high mobility within the glassy porous framework. The anomalous mobility of the polymer chains causes strong subrelaxation that changed the elastic modulus about 3-fold. These results demonstrate that the unique dynamics and mechanics are attributable to the loose correlation between different components, suggesting the possible creation of unprecedented mechanical properties based on the molecular design of mechanically interlocked polymers.

Self-construction of supramolecular polyrotaxane films by an electrotriggered morphogen-driven process

The design of films using a one-pot process has recently attracted increasing interest in the field of polymer thin film formation. Herein we describe the preparation of one-pot supramolecular polyrotaxane (PRX) films using the morphogen-driven self-construction process. This one-pot buildup strategy where the film growth is triggered by the electrochemical formation and diffusion of a catalyst in close vicinity of the substrate has recently been introduced by our group. A one-pot mixture was used that contained (i) poly(acrylic acid) (PAA) functionalized by azide groups grafted on the polymer chain through oligo(ethylene glycol) (EG) arms, leading to PAA-EG13-N3, (ii) cyclodextrins (α and β CD), as macrocycles that can be threaded along EG arms, (iii) alkyne-functionalized stoppers (ferrocene or adamantane), to cap the PRX assembly by click chemistry, and (iv) copper sulfate. The one-pot mixture solution was brought into contact with a gold electrode. Cu(I), the morphogen, was generated electrochemically from Cu(II) at the electrode/one-pot solution interface. This electrotriggered click reaction leads to the capping of polypseudorotaxane yielding to PRXs. The PRXs can self-assemble through lateral supramolecular interactions to form aggregates and ensure the cohesion of the film. The film buildup was investigated using different types of CD and alkyne functionalized stoppers. Supramolecular PRX aggregates were characterized by X-ray diffraction measurements. The film topographies were imaged by atomic force microscopy. The influence of the concentration in CD and the presence of a competitor were studied as well. The stability of the resulting film was tested in contact with 8 M urea and during the electrochemical oxidation of ferrocene.