A 'green' chitosan-silver nanoparticle composite as a heterogeneous as well as micro-heterogeneous catalyst

Protector-free, non-plasmonic silver quantum clusters by femtosecond pulse laser irradiation: in situ binding on nanocellulose filaments for improved catalytic activity and cycling performance

This study introduces a new, facile method to synthesize silver clusters from aqueous silver ion solution by using high intensity femtosecond pulse laser irradiation. The particles obtained in the absence of reducing or capping agents are 1-17 nm in size and presented quantum properties, as characterized by fluorescence, but did not exhibit plasmon signals, which is not a common characteristic of conventional silver nanoparticles. In a further development, small silver quantum clusters (∼1 nm) were bound in situ to wet-spun filaments of cellulose nanofibrils by pulsed laser irradiation. The obtained hybrid filaments as well as free silver quantum clusters revealed a catalytic activity remarkably higher than that of free gold quantum clusters; moreover, the hybrid filaments were found to show improved stability and cycling performance for silver-based catalysis. The present results indicate the potential of femtosecond laser irradiation to generate clusters as well as hybrid systems with excellent performance and reactivity.

Catalytic Performance in Nitroarene Reduction of Nanocatalyst Based on Noble Metal Nanoparticles Supported on Polymer/s-Layer Protein Hybrids

We present a novel bionanocatalyst fabricated by the adsorption-reduction of metal ions on a polyurethane/S-layer protein biotemplate. The bioinspired support was obtained by the adsorption of S-layer proteins (isolated from Lentilactobacillus kefiri) on polyurethane particles. Silver and platinum nanoparticles were well-loaded on the surface of the support after the combination with metallic salts and reduction with H2 at room temperature. Transmission electron microscopy analysis revealed the strawberry-like morphology of the bionanocatalysts with a particle size, dn, of 2.39 nm for platinum and 9.60 nm for silver. Both systems catalyzed the hydrogenation of p-nitrophenol to p-aminophenol with high efficiency in water at mild conditions in the presence of NaBH4. Three different amounts of bionanocatalyst were tested, and in all cases, conversions between 97 and 99% were observed. The catalysts displayed excellent recyclability over ten cycles, and no extensive damage in their nanostructure was noted after them. The bionanocatalysts were stable during their production, storage, and use, thanks to the fact that the biosupport provides an effective driving force in the formation and stabilization of the metallic nanoparticles. The successful bioinspired production strategy and the good catalytic ability of the systems are encouraging in the search for nontoxic, simple, clean, and eco-friendly procedures for the synthesis and exploitation of nanostructures.

Albumin-coated green-synthesized zinc oxide nanoflowers inhibit skin melanoma cells growth via intra-cellular oxidative stress

Zinc oxide (ZnO) has attracted a substantial interest in cancer research owing to their promising utility in cancer imaging and therapy. This study aimed to synthesized ZnO nanoflowers coated with albumin to actively target and the inhibit skin melanoma cells. We synthesized bovine serum albumin (BSA)-coated ZnO nanoflowers (BSA@ZnO NFs) and evaluated it's in vitro and in vivo therapeutic efficacy for skin cancer cells. BSA@ZnO NFs were prepared via single-step reduction method in the presence of plant extract (Heliotropium indicum) act as a capping agent, and further the successful fabrication was established by various physico-chemical characterizations, such as scanning electron microscopy (SEM), Fourier transform infra-red (FT-IR) spectroscopy, and x-rays diffraction (XRD) analysis. The fabricated BSA@ZnO NFs appeared flower like with multiple cone-shaped wings and average hydration size of 220.8 ± 12.6 nm. Further, BSA@ZnO NFs showed enhanced cellular uptake and cytocidal effects against skin cancer cells by inhibiting their growth via oxidative stress compared uncoated ZnO NFs. Moreover, BSA@ZnO NFs showed enhance biosafety, blood circulation time, tumor accumulation and in vivo tumor growth inhibition compared to ZnO NFs. In short, our findings suggesting BSA@ZnO NFs as a promising candidate for various types of cancer treatment along with chemotherapy.

Recent progress and treatment strategy of pectin polysaccharide based tissue engineering scaffolds in cancer therapy, wound healing and cartilage regeneration

Natural polymers and its mixtures in the form of films, sponges and hydrogels are playing a major role in tissue engineering and regenerative medicine. Hydrogels have been extensively investigated as standalone materials for drug delivery purposes as they enable effective encapsulation and sustained release of drugs. Biopolymers are widely utilised in the fabrication of hydrogels due to their safety, biocompatibility, low toxicity, and regulated breakdown by human enzymes. Among all the biopolymers, polysaccharide-based polymer is well suited to overcome the limitations of traditional wound dressing materials. Pectin is a polysaccharide which can be extracted from different plant sources and is used in various pharmaceutical and biomedical applications including cartilage regeneration. Pectin itself cannot be employed as scaffolds for tissue engineering since it decomposes quickly. This article discusses recent research and developments on pectin polysaccharide, including its types, origins, applications, and potential demands for use in AI-mediated scaffolds. It also covers the materials-design process, strategy for implementation to material selection and fabrication methods for evaluation. Finally, we discuss unmet requirements and current obstacles in the development of optimal materials for wound healing and bone-tissue regeneration, as well as emerging strategies in the field.

Direct sunlight induced room temperature synthesis of anticancer and catalytic silver nanoparticles by shrimp shell waste derived chitosan

The use of marine waste derived chitosan (CS) for the synthesis of nanomaterials is considered as one of the effective routes for bio-waste management and recovering functional products. Herein, CS capped silver nanoparticles (Ag NPs-CS) with potential anticancer and dye pollutants adoption properties have been synthesized photochemically under direct sunlight. To obtain, CS, shrimp shell waste was subjected to a serious of standard demineralization, deproteinization and deacetylation processes. The electronic absorption peak (400 nm) denoting surface plasmonic resonance of Ag NPs and infrared peaks relevant to CS (3364 cm-1 of OH/NH2, 2932 cm-1 of CH, and 1647 cm-1 of -CO) exhibited peaks confirmed the formation of CS-Ag NPs. Ag NPs-CS exhibited anticancer activity against Human lung adenocarcinoma cell lines (A549), the maximum cell death noticed at the concentration of 20 μg/mL and 70 μg/mL was 20 and 52 %, respectively. An aqueous Ag NPs-CS (100 μg/mL) was degraded ≥95 % of mixed dye target solution (25 mg/mL) containing equal volume of cationic dye (Methylene blue and Rhodamine B) and anionic dye (methyl orange). Therefore, these findings suggest that the shrimp shell waste derived CS can be used for the synthesis of CS-Ag NPs with potential biomedical and environmental applications.

Application of Chitosan/Poly(vinyl alcohol) Stabilized Copper Film Materials for the Borylation of α, β-Unsaturated Ketones, Morita-Baylis-Hillman Alcohols and Esters in Aqueous Phase

A chitosan/poly(vinyl alcohol)-stabilized copper nanoparticle (CP@Cu NPs) was used as a heterogeneous catalyst for the borylation of α, β-unsaturated ketones, MBH alcohols, and MBH esters in mild conditions. This catalyst not only demonstrated remarkable efficiency in synthesizing organoboron compounds but also still maintained excellent reactivity and stability even after seven recycled uses of the catalyst. This methodology provides a gentle and efficient approach to synthesize the organoboron compounds by efficiently constructing carbon-boron bonds.

Universal Single-Step Approach to the Immobilization of Cyclodextrins in a Supercritical Medium for Capturing Drug, Dye, and Metal Nanoclusters

By utilizing nanoreactor-like structures, the immobilization of macromolecules such as calixarenes and cyclodextrins (CD) with bucket-like structures provides new possibilities for engineered surface-molecule systems. The practical use of any molecular system depends on the availability of a universal procedure for immobilizing molecules with torus-like structures on various surfaces while maintaining identical operating parameters. There are currently several steps, including toxic solvent-based approaches using modified β-CD to covalently attach to surfaces with multistep reactions. However, the existing multistep process results in molecular orientation, restricts the accessibility of the hydrophobic barrel of β-CD's for practical use, and is effectively unable to use the surfaces immobilized with β-CD for a variety of applications. In this study, it was demonstrated that β-CD attached to the oxide-based semiconductor and metal surfaces through a condensation reaction between the hydroxyl-terminated oxide-based semiconductor/metal oxide and β-CD in supercritical carbon dioxide (SCCO₂) as a medium. The primary benefit of SCCO₂-assisted grafting of unmodified β-CD on various oxide-based metal and semiconductor surfaces is that it is a simple, efficient, one-step process and that it is ligand-free, scalable, substrate-independent, and uses minimal energy. Various physical microscopy and chemical spectroscopic methods were used to analyze the grafted β-CD oligomers. The application of the grafted β-CD films was demonstrated by the immobilization of rhodamine B (RhB), a dye, and dopamine, a drug. The in situ nucleation and growth of silver nanoclusters (AgNCs) in the molecular systems were studied for antibacterial and tribological properties by utilizing the guest-host interaction ability of β-CD.

Investigation on anti-quorum sensing activities of chitosan AgNP's-chitosanase against MDR pathogens

Marine bio-nanotechnology is a new promising field having high perspective in the area of biological research. In 2018 the production of crustacean shells especially from shrimp is about 54,500 tons on South East coast of India. The current study focuses on the use of extracted chitosan (Squilla shells) polymer in silver nanoparticle synthesis along with immobilized chitosanase synergistically improves the antimicrobial and quorum quenching effects against the multi drug resistant (MDR) pathogens. The main objective of the study is to synthesize the chitosan AgNPs and to immobilize the enzyme chitosanase with it and to study the anti quorum sensing (quorum quenching) activity against MDR pathogens. This study will render a new ideology to eliminate biofilm formation and suppress the pathogenicity of planktonic MDR pathogens. Since the combinations of chitosanase, as well as chitosan AgNPs, are very efficient in eliminating them.

Chitosan-supported metal nanocatalysts for the reduction of nitroaromatics

The second most abundant natural polymer in the earth's crust is chitosan (CS). The unique physical, chemical, structural, and mechanical features of this natural polymer have led to its increased application in a variety of fields such as medicine, catalysis, removal of pollutants, etc. To eliminate various pollutants, it is preferable to employ natural compounds as their use aids the removal of contaminants from the environment. Consequently, employing CS to eliminate contaminants is a viable choice. For this aim, CS can be applied as a template and support for metal nanoparticles (MNPs) and prevent the accumulation of MNPs as well as a reducing and stabilizing agent for the fabrication of MNPs. Among the pollutants present in nature, nitro compounds are an important and wide category of biological pollutants. 4-Nitrophenol (4-NP) is one of the nitro pollutants. There are different ways for the removal of 4-NP, but the best and most effective method for this purpose is the application of a metallic catalyst and a reducing agent. In this review, we report the recent developments regarding CS-supported metallic (nano)catalysts for the reduction of nitroaromatics such as nitrophenols, nitroaniline compounds, nitrobenzene, etc. in the presence of reducing agents. The metals investigated in this study include Ag, Au, Ni, Cu, Ru, Pt, Pd, etc.

Composite Coatings of Chitosan and Silver Nanoparticles Obtained by Galvanic Deposition for Orthopedic Implants

In this work, composite coatings of chitosan and silver nanoparticles were presented as an antibacterial coating for orthopedic implants. Coatings were deposited on AISI 304L using the galvanic deposition method. In galvanic deposition, the difference of the electrochemical redox potential between two metals (the substrate and a sacrificial anode) has the pivotal role in the process. In the coupling of these two metals a spontaneous redox reaction occurs and thus no external power supply is necessary. Using this process, a uniform deposition on the exposed area and a good adherence of the composite coating on the metallic substrate were achieved. Physical-chemical characterizations were carried out to evaluate morphology, chemical composition, and the presence of silver nanoparticles. These characterizations have shown the deposition of coatings with homogenous and porous surface structures with silver nanoparticles incorporated and distributed into the polymeric matrix. Corrosion tests were also carried out in a simulated body fluid at 37 °C in order to simulate the same physiological conditions. Corrosion potential and corrosion current density were obtained from the polarization curves by Tafel extrapolation. The results show an improvement in protection against corrosion phenomena compared to bare AISI 304L. Furthermore, the ability of the coating to release the Ag+ was evaluated in the simulated body fluid at 37 °C and it was found that the release mechanism switches from anomalous to diffusion controlled after 3 h.

Inactivation of SARS-CoV-2 by a chitosan/α-Ag2WO4 composite generated by femtosecond laser irradiation

In the current COVID-19 pandemic, the next generation of innovative materials with enhanced anti-SARS-CoV-2 activity is urgently needed to prevent the spread of this virus within the community. Herein, we report the synthesis of chitosan/α-Ag₂WO₄ composites synthetized by femtosecond laser irradiation. The antimicrobial activity against Escherichia coli, Methicilin-susceptible Staphylococcus aureus (MSSA), and Candida albicans was determined by estimating the minimum inhibitory concentration (MIC) and minimal bactericidal/fungicidal concentration (MBC/MFC). To assess the biocompatibility of chitosan/α-Ag₂WO₄ composites in a range involving MIC and MBC/MFC on keratinocytes cells (NOK-si), an alamarBlue™ assay and an MTT assay were carried out. The SARS-CoV-2 virucidal effects was analyzed in Vero E6 cells through viral titer quantified in cell culture supernatant by PFU/mL assay. Our results showed a very similar antimicrobial activity of chitosan/α-Ag₂WO₄ 3.3 and 6.6, with the last one demonstrating a slightly better action against MSSA. The chitosan/α-Ag₂WO₄ 9.9 showed a wide range of antimicrobial activity (0.49-31.25 µg/mL). The cytotoxicity outcomes by alamarBlue™ revealed that the concentrations of interest (MIC and MBC/MFC) were considered non-cytotoxic to all composites after 72 h of exposure. The Chitosan/α-Ag₂WO₄ (CS6.6/α-Ag₂WO₄) composite reduced the SARS-CoV-2 viral titer quantification up to 80% of the controls. Then, our results suggest that these composites are highly efficient materials to kill bacteria (Escherichia coli, Methicillin-susceptible Staphylococcus aureus, and the yeast strain Candida albicans), in addition to inactivating SARS-CoV-2 by contact, through ROS production.

Chitosan Silver and Gold Nanoparticle Formation Using Endophytic Fungi as Powerful Antimicrobial and Anti-Biofilm Potentialities

Nanotechnology is emerging as a new technology with encouraging innovations. Global antibiotic use has grown enormously, with antibiotic resistance increasing by about 80 percent. In view of this alarming situation, intensive research has been carried out into biogenic nanoparticles and their antibacterial, antifungal, and antitumor activities. Many methods are available to enhance stability and dispersion via peroration of conjugate with a polymer, such as chitosan, and other bioactive natural products. Two marine fungi were isolated and identified as Aspergillus sp. and Alternaria sp. via sequencing of the 16S rRNA gene. In this work, these strains were used to form the conjugation of biogenic silver nanoparticles (AgNPs) from Aspergillus sp. Silv2 extract and gold nanoparticles (AuNPs) from Alternaria sp. Gol2 extracts with chitosan to prepare chitosan–AgNPs and chitosan–AuNP conjugates. A variety of imaging and analytical methods, such as UV–vis, X-ray powder diffraction (XRD), FTIR spectroscopy, transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were utilized to characterize biogenic nanoparticles and conjugates. The biosynthesized Ag and Au nanoparticles along with the prepared conjugates were evaluated for their antimicrobial effects on Gram-negative and Gram-positive bacterial isolates, including Escherichia coli and Staphylococcus aureus. Both chitosan–AgNP and AuNP showed powerful antimicrobial activities compared to the control. On the other hand, chitosan–AgNP conjugation had better antibacterial ctivity than chitosan–AuNPs, which exhibited moderate activity against S. aureus and very low activity against E. coli. Furthermore, the antibiofilm potentials of the prepared conjugates were tested against four biofilm-forming bacteria, including P. aeruginosa, B. subtilis, E. coli, and S. aureus. The obtained results indicate that the chitosan–AgNP showed a promising anti-biofilm activities on all strains, especially S. aureus, while chitosan–AuNP conjugates showed moderate anti-biofilm against B. subtilis and weak activities against the other three strains. These results showed the superiority of chitosan–AgNP as a promising antibacterial as well as biofilm formation inhibitors.

Eco-Friendly Synthesized PVA/Chitosan/Oxalic Acid Nanocomposite Hydrogels Embedding Silver Nanoparticles as Antibacterial Materials

PVA/chitosan (PVA/CS) composite hydrogels incorporating silver nanoparticles (AgNPs) were prepared by double-cross-linked procedures: freeze−thawing and electrostatic interactions. Oxalic acid (OA) was used both for solubilization and ionic cross-linking of CS. AgNPs covered by CS (CS-AgNPs) with an average diameter of 9 nm and 18% silver were obtained in the presence of CS, acting as reducing agent and particle stabilizer. The increase of the number of freeze−thaw cycles, as well as of the PVA:CS and OA:CS ratios, resulted in an increase of the gel fraction and elastic modulus. Practically, the elastic modulus of the hydrogels increased from 3.5 kPa in the absence of OA to 11.6 kPa at a 1:1 OA:CS weight ratio, proving that OA was involved in physical cross-linking. The physicochemical properties were not altered by the addition of CS-AgNPs in low concentration; however, concentrations higher than 3% resulted in low gel fraction and elastic modulus. The amount of silver released from the composite hydrogels is very low (<0.4%), showing that AgNPs were well trapped within the polymeric matrix. The composite hydrogels displayed antimicrobial activity against S. aureus, K. pneumoniae or P. gingivalis. The low cytotoxicity and the antibacterial efficacy of hydrogels recommend them for wound and periodontitis treatment.

Optimization of anti-corrosion performance of novel magnetic polyaniline-Chitosan nanocomposite decorated with silver nanoparticles on Al in simulated acidizing environment using RSM

The suitability of newly synthesized magnetic polyaniline-Chitosan nanocomposite decorated with silver nanoparticles (Ag@PANI-CS-Fe₃O₄) as a robust corrosion inhibitor for Aluminum (Al) in a 5 M HCl environment has been investigated via Weight Loss (WL), Alternating Current (AC)-Impedance Spectroscopy (IS), Potentiontiodynamic polarization (Tafel plots), and Scanning Electron Microscopy (SEM) techniques. The protection efficiency (PE) was mathematically modeled using the Response Surface Methodology (RSM) to fit an empirical relation in terms of temperature, nanocomposite concentration, and time using the face-centered central composite design. The model was accurate with a coefficient of determination (R² = 99.27%). The negative Gibb's free energy of adsorption (ΔG_ads) values confirmed the spontaneity of Freundlich adsorption isotherm process on Al in 5 M HCl solution. The optimization simulation yielded maximum protection efficiency (of 97.88%) at 5 mg/L nanocomposite concentration, 1 h time, and an intermediate temperature of 304.8 K. Furthermore, the sensitivity of PE was evaluated to find that the low temperature 303 K is favorable for PE, whereas higher temperature will act adversely on PE. The results obtained by the RSM model are in agreement with the experimental observations.

Synthesis of chitosan/silver nanocomposites by phase inversion with the assistance of carbon dioxide

Carbon dioxide (CO₂) assisted synthesis of water-soluble silver nanoparticle with a narrow particle size distribution is reported here based on the phase-inversion procedure. Bio-derived chitosan (CS) is used to stabilize the metal nanoparticles according to its abundant functional groups. Formic acid is employed as both a solvent (for the polymer) and a reductant for in-situ reducing the silver precursor along with the solvent evaporation. CO₂ is utilized to combine with the amino groups of CS, reducing the viscosity of chitosan/formic acid solution and limiting the formation of hydrogen bonds. This promotes the stabilization and reduction efficiency of silver nanoparticles. In particular, 100% of Ag metal nanoparticles with the size of 7.5 ± 2.3 nm is successfully synthesized with the assistance of CO₂. Interestingly, the synthesized CS/Ag nanocomposites are water-soluble owing to the formation of carbamate groups. This water-soluble silver nanoparticle presents an exceptional performance in the selective reduction of 4-nitrophenol, where the turnover frequency (TOF = 599 h^-1) is even double with respect to the CO₂ free system.

Chitosan capped Ag/NiS nanocomposites: A novel colorimetric probe for detection of L-cysteine at nanomolar level and its anti-microbial activity

L-Cysteine (L-cys) plays very crucial role in biological systems. The study reports the colorimetric detection of L-cys at nanomolar level using chitosan capped Ag decorated NiS nanocomposite (chit-Ag/NiS NCs).The chemical reduction and co-precipitation methods were adopted to prepare chit-Ag/NiS NCs. The fabricated NCs was characterized by X-ray diffraction (XRD), fourier-transform infrared spectroscopy (FT-IR), FT-Raman, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The chit-Ag/NiS NCs particularly detect L-cys even in other amino acids presence. The chit-Ag/NiS NCs showed the surface charge of -26 ± 39.9 mV. The detection of L-cys was indicated by disappearance of yellowish-brown color of Chit-Ag/NiS NCs to colorless. A good linear correlation was found between absorbance vs logarithmic concentration of L-cys (1 μM to 1 nM) with R² value of 0.99. The chit-Ag/NiS NCs impregnated cotton swabs was prepared for real time detection of L-cys and the prepared probe was found to be highly selective and specific. The effect of pH, temperature and salinity influencing the L-cys detection was studied. Also, the antimicrobial activity of Chit-Ag/NiS NCs was investigated against gram negative (E. coli) and gram positive (B. subtilis) bacteria.

Chitosan: An Overview of Its Properties and Applications

Chitosan has garnered much interest due to its properties and possible applications. Every year the number of publications and patents based on this polymer increase. Chitosan exhibits poor solubility in neutral and basic media, limiting its use in such conditions. Another serious obstacle is directly related to its natural origin. Chitosan is not a single polymer with a defined structure but a family of molecules with differences in their composition, size, and monomer distribution. These properties have a fundamental effect on the biological and technological performance of the polymer. Moreover, some of the biological properties claimed are discrete. In this review, we discuss how chitosan chemistry can solve the problems related to its poor solubility and can boost the polymer properties. We focus on some of the main biological properties of chitosan and the relationship with the physicochemical properties of the polymer. Then, we review two polymer applications related to green processes: the use of chitosan in the green synthesis of metallic nanoparticles and its use as support for biocatalysts. Finally, we briefly describe how making use of the technological properties of chitosan makes it possible to develop a variety of systems for drug delivery.

Recent advances of emerging green chitosan-based biomaterials with potential biomedical applications: A review

Chitosan is the most abundant natural biopolymer, after cellulose. It is mainly derived from the fungi, shrimp's shells, and exoskeleton of crustaceans, through the deacetylation of chitin. The ecological sustainability associated with its exercise and the flexibility of chitosan owing to its active functional hydroxyl and amino groups makes it a promising candidate for a wide range of applications through a variety of modifications. The biodegradability and biocompatibility of chitosan and its derivatives along with their various chemical functionalities make them promising carriers for pharmaceutical, nutritional, medicinal, environmental, agriculture, drug delivery, and biotechnology applications. The present work aims to provide a detailed and organized description of modified chitosan and its derivatives-based nanomaterials for biomedical applications. We addressed the biological and physicochemical benefits of nanocomposite materials made up of chitosan and its derivatives in various formulations, including improved physicochemical stability and cells/tissue interaction, controlled drug release, and increased bioavailability and efficacy in clinical practice. Moreover, several modification techniques and their effective utilization are also reviewed and collected in this review.

Ag-Based Synergistic Antimicrobial Composites. A Critical Review

The emerging problem of the antibiotic resistance development and the consequences that the health, food and other sectors face stimulate researchers to find safe and effective alternative methods to fight antimicrobial resistance (AMR) and biofilm formation. One of the most promising and efficient groups of materials known for robust antimicrobial performance is noble metal nanoparticles. Notably, silver nanoparticles (AgNPs) have been already widely investigated and applied as antimicrobial agents. However, it has been proposed to create synergistic composites, because pathogens can find their way to develop resistance against metal nanophases; therefore, it could be important to strengthen and secure their antipathogen potency. These complex materials are comprised of individual components with intrinsic antimicrobial action against a wide range of pathogens. One part consists of inorganic AgNPs, and the other, of active organic molecules with pronounced germicidal effects: both phases complement each other, and the effect might just be the sum of the individual effects, or it can be reinforced by the simultaneous application. Many organic molecules have been proposed as potential candidates and successfully united with inorganic counterparts: polysaccharides, with chitosan being the most used component; phenols and organic acids; and peptides and other agents of animal and synthetic origin. In this review, we overview the available literature and critically discuss the findings, including the mechanisms of action, efficacy and application of the silver-based synergistic antimicrobial composites. Hence, we provide a structured summary of the current state of the research direction and give an opinion on perspectives on the development of hybrid Ag-based nanoantimicrobials (NAMs).

Eggshell membranes coated chitosan decorated with metal nanoparticles for the catalytic reduction of organic contaminates

This study focusses on the effect of chitosan coating with eggshell membranes for the reduction of different organic pollutants. Chickens eggs were collected from the local market and utilized to extract the enrich eggshell membranes (ESM). The chicken eggshell membranes are abundant waste material which is inexpensive and illustrates remarkable physiognomies for many possible applications. Fresh fibers/strips coated by chitosan (CS) were prepared by mixing the eggshell membranes with CS solution (2 wt%/v) in different proportions i.e., 10 %, 30 %, 50 %, 60 %, 70 %, 80 %, and 90 %. These strips were then templated with copper and iron metal nanoparticles by putting them in their metal ions aqueous solution to adsorb the metals ions and were then reduced to zero-valent metal nanoparticles (MNPS) by using NaBH₄ aqueous solution. These prepared materials (MNPS@ESM-CS) were characterized by using XRD, XPS, FE-SEM, and EDS to confirm the successful preparation of MNPs over the surface of ESM coated with CS. Afterwards, these prepared materials were investigated as a catalyst for the reduction of different organic pollutants, such as 4-nitroaniline (4-NA), 4-nitrophenol (4-NP) and methylene blue (MB) dye. The catalytic efficiency of ESM was enhanced 5.7-fold by adding only 20 % CS solution. It was observed that Cu@ESM-CS-80 % took 7 min for reduction of 4-NA, 6 min for 4-NP, and 7 min for MB dye. The reusability of the catalytic strip was also investigated for four cycles and found efficient and can be easily recovered by simply pulling it from the reaction mixture.

BSA-Silver Nanoparticles: A Potential Multimodal Therapeutics for Conventional and Photothermal Treatment of Skin Cancer

Silver nanoparticles (NPs) have attracted a considerable interest in the field of cancer research due to their potential utility in cancer therapy. In the present study, we developed bovine serum albumin (BSA)-coated silver NPs (BSA-Silver NPs) and characterized in vitro multimodal therapeutic activities of NPs for the treatment of skin cancer. BSA-Silver NPs were synthesized by a single-step reduction process, and the successful preparation was verified through a list of physical characterizations, including transmission electron microscopy (TEM), ultraviolet-visible (UV–VIS) light spectroscopy, dynamic light scattering (DLS), and Fourier transform infrared (FT-IR) spectroscopy. The synthesized BSA-Silver NPs showed marked cytocidal effects on B16F10 melanoma cells, which was likely caused by oxidative stress. BSA-Silver NPs also elicited significant anti-angiogenic effects on HUVEC (human umbilical vein endothelial cell) by inhibiting their proliferation, migration, and tube formation. Moreover, BSA-Silver NPs showed a considerable light-to-heat conversion ability, suggesting their utility as photothermal agents. Overall, our findings suggest that BSA-Silver NPs may be promising candidates for the multimodal therapy of skin cancer.

Water-Soluble Chitosan Conjugated DOTA-Bombesin Peptide Capped Gold Nanoparticles as a Targeted Therapeutic Agent for Prostate Cancer

Introduction

Functionalization of water-soluble chitosan (WSCS) nanocolloids with, gold nanoparticles (AuNPs), and LyslLys3 (1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid)-bombesin 1–14 (DOTA-BBN) peptide affords an innovative pathway to produce prostate tumor cell-specific nanomedicine agents with potential applications in molecular imaging and therapy.

Methods

The preparation involves the production and full characterization of water-soluble chitosan (WSCS), via gamma (γ) rays (80 kGy) irradiation, followed by DOTA-BBN conjugation for subsequent use as an effective template toward the synthesis of tumor cell-specific AuNPs-WSCS-DOTA-BBN.

Results

The WSCS-DOTA-BBN polymeric nanoparticles (86 ± 2.03 nm) served multiple roles as reducing and stabilizing agents in the overall template synthesis of tumor cell-targeted AuNPs. The AuNPs capped with WSCS and WSCS-DOTA-BBN exhibited average Au-core diameter of 17 ± 8 nm and 20 ± 7 nm with hydrodynamic diameters of 56 ± 1 and 67± 2 nm, respectively. The AuNPs-WSCS-DOTA-BBN showed optimum in vitro stability in biologically relevant solutions. The targeted AuNPs showed selective affinity toward GRP receptors overexpressed in prostate cancer cells (PC-3 and LNCaP).

Discussion

The AuNPs-WSCS-DOTA-BBN displayed cytotoxicity effects against PC-3 and LNCaP cancer cells, with concomitant safety toward the HAECs normal cells. The AuNPs-WSCS-DOTA-BBN showed synergistic targeting toward tumor cells with selective cytotoxicity of AuNPs towards PC-3 and LNCaP cells. Our investigations provide compelling evidence that AuNPs functionalized with WSCS-DOTA-BBN is an innovative nanomedicine approach for use in molecular imaging and therapy of GRP receptor-positive tumors. The template synthesis of AuNPs-WSCS-DOTA-BBN serves as an excellent non-radioactive surrogate for the development of the corresponding ¹⁹⁸AuNPs theragnostic nanoradiopharmaceutical for use in cancer diagnosis and therapy.

Investigations on characteristics of polyurethane foam impregnated with nanochitosan and nanosilver/silver oxide and its effectiveness in phosphate removal

A novel potential adsorbent, produced with chitosan nanoparticles and silver/silver oxide nanoparticles impregnated on polyurethane foam (PFCA), is developed for phosphate removal in aqueous solutions. The ultraviolet-visible (UV-Vis) spectroscopy uncovered the emergence of nanoparticles. The field emission scanning electron microscopy (FESEM) provided the mean size of chitosan nanoparticles between 56 and 112 nm and that of silver-silver oxide nanoparticles between 44 and 75 nm. Energy dispersive X-ray (EDX) spectroscopy determined the presence of specific elements (C, O, P and Ag) in the adsorbent before and after treatment. Fourier transform infrared (FTIR) spectroscopy revealed the interplay between the N-H bond of amino group in PFCA and phosphate ions during adsorption. X-ray diffraction (XRD) analysis of PFCA showed nearly the same pattern before and after treatment, indicating the stability of PFCA. The silver ion concentration in the effluent from inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis was found to be very less and below the drinking water limits. The surface area estimated by Brunauer-Emmett-Teller (BET) studies was found to be 2.17 m²/g. The experimental studies showed that PFCA can remove 61.24% of phosphate from an influent phosphate phosphorus concentration of 50 mg P/L, at its propitious condition. Even after 7 cycles of reuse, PFCA proved to be effective in removing 20.58% of phosphate. Hence, PFCA can be considered to be a potential sorbent for removing phosphate from surface water. Graphical abstract.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Rapid gram-scale synthesis of Au/chitosan nanoparticles catalysts using solid mortar grinding

Owing to the abundant functional groups present in the chitosan polymer, high density catalytic tiny gold particles with greater dispersion can be anchored on the chitosan powder using simple mortar and pestle.

The Efficacy of Imipenem Conjugated with Synthesized Silver Nanoparticles Against Acinetobacter baumannii Clinical Isolates, Iran

Carbapenem-resistant Acinetobacter baumannii (CRAB) remains as a serious cause of infectious diseases and septic mortality in hospitalized patients worldwide. This study was conducted to evaluate the antimicrobial effect of imipenem conjugated silver nanoparticles (AgNPs) on resistant isolated A. baumannii from nosocomial infections.The antimicrobial susceptibility test of 100 A. baumannii clinical isolates against different antibiotics was performed. PCR was used to confirm bacterial resistance and to identify different genes encoding Ambler class β-lactamases. The chemically synthesized AgNPs were characterized using UV-vis spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier-transform infrared (FTIR). The stability, drug release kinetic, and cytotoxicity (MTT assay) of AgNPs were also investigated. The imipenem were conjugated with AgNPs, and conjugants were characterized as discussed above. Minimum inhibitory concentration (MIC) of the AgNPs and conjugants were tested against A. baumannii isolates and compared with imipenem alone.The results revealed that among all isolated A. baumannii, 76% showed resistant to imipenem (MIC ≥ 64 μg/mL to ≥ 256 μg/mL). The bla_OXA-23, bla_PER, bla_OXA-40, and bla_IMP genes were the most prevalent genes. UV-vis spectroscopy, XRD, TEM, and FTIR analysis confirmed synthesis of AgNPs (average size of 10-40 nm) and conjugation with imipenem. The release of imipenem from AgNPs can be defined as Fickian diffusion model. The MIC values of AgNPs conjugated with imipenem against resistant A. baumannii were decreased in a dose dependent manner and were based on existence of resistant genes. The AgNPs also showed low cytotoxic effects.The results suggest that imipenem-AgNPs has a strong potency as a powerful antibacterial agent against multi-resistant A. baumannii.

Facile synthesis of Ag nanoparticles-loaded chitosan antibacterial nanocomposite and its application in polypropylene

The development of environmental-friendly antibacterial agents with high efficiency and low cost has become the focus of attention. In this work, the Ag nanoparticles doped into chitosan (Ag NPs-CS) were synthesized by a green and facile method, and the samples were characterized by UV-Vis spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The antibacterial tests implied that Ag NPs-CS obtained from glucose (G-Ag NPs-CS) exhibited the excellent antimicrobial activities against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) microbes. Besides, the utilization of antibacterial agents in polymeric materials plays an significant role in healthy living. The aim is to impart the antibacterial properties and maintain/improve the mechanical properties. Therefore, the G-Ag NPs-CS with 5 wt% Ag was chosen as the optimal additive to endow polypropylene with antimicrobial activity via a simple melt blending method. The results demonstrated that the suppression of bacteria proliferation was enhanced with increasing the amount of antibacterial agent, and the microorganisms were almost killed when the content reached to 8 wt%. Meanwhile, the considerable improvement in elastic modulus and impact strength along with a slight decrease of elongation at break provided the evidence that Ag NPs-CS/PP nanocomposites were the promising candidate for practical applications.

Silver-chitosan nanocomposite as a plasmonic platform for SERS sensing of polyaromatic sulfur heterocycles in oil fuel

Herein, a silver-chitosan nanocomposite for application in surface enhanced Raman spectroscopy (SERS) sensing was proposed. It was shown that optically transparent chitosan coatings with 0.8 μm thickness allow penetration of target analytes to silver nanoparticles and the analysis in both polar and nonpolar solvents. Under the chosen conditions, chitosan formed continuously smooth films and coatings stabilizing rough nanostructured metallic surfaces and served as a suitable matrix for immobilization, uniform spreading, and preconcentration of the analytes. Polycyclic aromatic sulfur heterocycles were chosen as target analytes being one of the most important fuel quality markers, hazardous components, and the hardest-to-remove impurities. For the most effective immobilization and even distribution of the analytes onto a nanostructured metallic surface, an additional polymer layer of chitosan was found to be needed. The presence of thin films of chitosan resulted in higher reproducibility of SERS spectra as compared to bare nanostructured silver substrates. Additionally, the developed nanocomposite SERS sensors provided the rapid determination of dibenzothiophene and its derivatives in isooctane with the threshold of detection better than 0.1 μM. This approach was successfully applied in the analysis of real fuel samples and the results agreed well with independently measured FTIR and GC-MS data.

Multifunctional PLA Blends Containing Chitosan Mediated Silver Nanoparticles: Thermal, Mechanical, Antibacterial, and Degradation Properties

Poly(lactic acid) (PLA) is one of the most commonly employed synthetic biopolymers for facing plastic waste problems. Despite its numerous strengths, its inherent brittleness, low toughness, and thermal stability, as well as a relatively slow crystallization rate represent some limiting properties when packaging is its final intended application. In the present work, silver nanoparticles obtained from a facile and green synthesis method, mediated with chitosan as a reducing and stabilizing agent, have been introduced in the oligomeric lactic acid (OLA) plasticized PLA in order to obtain nanocomposites with enhanced properties to find potential application as antibacterial food packaging materials. In this way, the green character of the matrix and plasticizer was preserved by using an eco-friendly synthesis protocol of the nanofiller. The X-ray diffraction (XRD) and differential scanning calorimetry (DSC) results proved the modification of the crystalline structure as well as the crystallinity of the pristine matrix when chitosan mediated silver nanoparticles (AgCH-NPs) were present. The final effect over the thermal stability, mechanical properties, degradation under composting conditions, and antimicrobial behavior when AgCH-NPs were added to the neat plasticized PLA matrix was also investigated. The obtained results revealed interesting properties of the final nanocomposites to be applied as materials for the targeted application.

Optimization of ZnAl/Chitosan Supra-Nano Hybrid Preparation as Efficient Antibacterial Material

The menace of antimicrobial resistance continues to increase and hence the need to discover new antibiotics, especially alternative and effective sources such as hybrid organic-inorganic, organic-organic materials, and other combinations. In this study, an antimicrobial hybrid supra-nano material was prepared by the bi-titration synthesis method of chitosan (CS) and ZnAl layered double hydroxide. Fourier-transform infrared spectrometer (FTIR), thermogravimetric and differential thermal gravimetric (TGA/DTG), ultraviolet-visible (UV-Vis), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses indicated that the ZnAl/CS hybrid exhibited low crystallinity with high thermal stability. The results of ZnAl/CS characterization showed the characteristic properties of the individual components ZnAl and CS, indicating a successful preparation of the ZnAl/CS hybrid. The antibacterial tests revealed that the ZnAl/CS hybrid possessed an enhanced antimicrobial effect against both Escherichia coli (E. coli, MTCC 739) and Penicilliumcyclopium (P. cyclopium, AS 3.4513). Under the central composite design (CCD) of the response surface methodology (RSM) tool, the parameters of the hybrid synthesis reaction were optimized and the result obtained was as follows: reaction pH was 11.3, reagent Zn/Al ratio was 3.27, and chitosan concentration was 1.07 g/L. After optimization, it was found that the antibacterial activity of ZnAl/CS was strengthened against E. coli as evidenced by a widening of the inhibition zone of about 41.6%. The antibacterial activity of ZnAl/CS was mainly due to the reactivation of the antibacterial activity of CS associated with the release of Zn²⁺ and Al³⁺ metal ions in addition to ZnO, Al₂O₃, and ZnAl₂O₄ compounds resulting from the method of preparation.

Simultaneous green synthesis and in-situ impregnation of silver nanoparticles into organic nanofibers by Lythrum salicaria extract: Morphological, thermal, antimicrobial and release properties

This research has revealed the promising, green and one-pot approach for fabrication of antimicrobial nanohybrids based on organic nanofibers including cellulose (CNF), chitosan (CHNF), and lignocellulose (LCNF) nanofibers impregnated with silver nanoparticles (AgNPs). Lythrum salicaria extract was used as a reducing agent as well as a capping agent. Formation of the spherical AgNPs ranging between 45 and 65 nm was proved by UV-Vis spectroscopy, transmission electron microscopy (TEM), and dynamic light scattering (DLS). Biomaterials supported AgNPs were characterized and compared for their morphological, thermal, release, and antimicrobial properties. The considerable influence of the phenolic compounds of L.salicaria extract on the synthesis and uniform distribution of AgNPs on nanofibers was confirmed by field emission electron microscopy (FE-SEM). Energy dispersive X-ray spectroscopy (EDX) and ICP-OES analysis of nanohybrids, reflected a high loading capacity for LCNF and also CHNF in contrast to CNF. The release of AgNPs from LCNF substrate was lower than other nanofibers but the order of antimicrobial activity of nanohybrids against E.coli and S.aureus was as this: CHNF ˃ LCNF ˃ CNF. Generally, this research suggested that the efficiency of CHNF and LCNF as immobilizing support of AgNPs is higher than CNF and L.salicaria extract was proposed as a high potential reducing and capping agent.

Bimetallic Nanoparticles Anchored on Core-Shell Support as an Easily Recoverable and Reusable Catalytic System for Efficient Nitroarene Reduction

We report an easily recoverable and reusable versatile magnetic catalyst (Fe3O4@CS_AgNi, where CS = chitosan) for organic reduction reactions. The catalytic system is prepared by dispersing AgNi bimetallic nanoparticles on the magnetite core-shell (Fe3O4@CS). The as-synthesized catalyst has been characterized by spectroscopic techniques, such as IR, UV-vis, and X-ray photoelectron spectroscopy (XPS), and analytical tools, such as thermogravimetric analysis, powder X-ray diffraction, Brunauer-Emmett-Teller adsorption, FEG-scanning electron microscopy, high-resolution transmission electron microscopy (HR-TEM), inductively coupled plasma-atomic emission spectroscopy, and magnetic measurements. HR-TEM studies indicate the core-shell structure of Fe3O4@CS and confirm the presence of AgNi nanoparticles on the surface of Fe3O4@CS spheres. IR spectral and XPS studies lend evidence for the occurrence of a strong chemical interaction between the amino groups of CS and AgNi nanoparticles. The nano-catalyst Fe3O4@CS_AgNi rapidly reduces p-nitrophenol to p-aminophenol using NaBH4 as the reductant within a few minutes under ambient conditions (as monitored by UV-visible spectroscopy). The utility of this catalytic system has also been extended to the reduction of other nitroarenes. A strong interaction between Fe3O4@CS and AgNi nanoparticles impedes the leaching of AgNi nanoparticles from the core-shell support, leading to excellent reusability of the catalyst.

Eco-Friendly Method for Tailoring Biocompatible and Antimicrobial Surfaces of Poly-L-Lactic Acid

In this study, a facile, eco-friendly route, in two steps, for obtaining of poly-L-lactic acid/chitosan-silver nanoparticles scaffolds under quiescent conditions was presented. The method consists of plasma treatment and then wet chemical treatment of poly-L-lactic acid (PLLA) films in a chitosan based-silver nanoparticles solution (Cs/AgNp). The changes of the physical and chemical surface proprieties were studied using scanning electron microscopy (SEM), small angle X-Ray scattering (SAXS), Fourier transform infrared spectroscopy (FTIR) and profilometry methods. A certain combination of plasma treatment and chitosan-based silver nanoparticles solution increased the biocompatibility of PLLA films in combination with cell line seeding as well as the antimicrobial activity for gram-positive and gram-negative bacteria. The sample that demonstrated from Energy Dispersive Spectroscopy (EDAX) to have the highest amount of nitrogen and the smallest amount of Ag, proved to have the highest value for cell viability, demonstrating better biocompatibility and very good antimicrobial proprieties.

A Low-Cost, Well-Designed Catalytic System Derived from Household Waste "Egg Shell": Applications in Organic Transformations

A waste feedstock-derived economical basic alternative catalyst is described in this review. Eggshell is one of the household wastes created in tons of weight daily. Therefore, in order to reduce the environmental pollution-related problems, its use in heterogeneous catalysis can be attributed as a great contribution for the chemical and material science society to carry out several known reactions and for the much-needed energy alternative biodiesel production as low-cost catalytic system. Keeping green chemistry in mind, industrial use of these catalysts may also reduce the use of other traditionally used high-cost chemical catalytic systems.