The channel length effect on the electrical performance of suspended-single-wall-carbon-nanotube-based field effect transistors

Piezo inkjet formation of Ag nanoparticles from microdots arrays for surface plasmonic resonance

The study aims to explore a novel approach for fabricating plasmonic nanostructures to enhance the optical properties and performance of various optoelectronic devices. The research begins by employing a piezo-inkjet printing technique to deposit drops containing Ag nanoparticles (NPs) onto a glass substrate at a predefined equidistance, with the goal of obtaining arrays of Ag microdots (Ag-µdots) on the glass substrate. This process is followed by a thermal annealing treatment. The printing parameters are first optimized to achieve uniform deposition of different sizes of Ag-µdots arrays by controlling the number of Ag ink drops. Subsequently, the printed arrays undergo thermal annealing at various temperatures in air for 60 min, enabling precise and uniform control over nanoparticle formation. The printed Ag nanoparticles are characterized using field emission scanning electron microscopy and atomic force microscopy to analyze their morphological features, ensuring their suitability for plasmonic applications. UV-Vis spectrophotometry is employed to investigate the enhanced surface-plasmonic-resonance properties of the printed AgNPs. Measurements confirm that the equidistant arrays of AgNPs obtained from annealing Ag microdots exhibit enhanced light-matter interaction, leading to a surface plasmon resonance response dependent on the Ag NPs' specific surface area. These enhanced surface plasmonic resonances open avenues for developing cutting-edge optoelectronic devices that leverage the benefits of plasmonic nanostructures, thereby enabling new opportunities for future technological developments across various fields.

Photonic Cooler Based on Multistacked Thin Films with Near-Infrared Filter Properties

We report on the development of a multistacked configuration of a photonic cooler for implementation in sunny and arid regions. The optimized multistacking structure considers TiOx as a top layer, NiOx as the buffer layer, and Ag as a hot mirror (i.e., a reflective layer of the NIR light spectrum). The entire stacked layers were deposited in situ without breaking the vacuum. The oxide layers were grown reactively under an oxygen medium at a deposition pressure of 2 × 10-4 Torr. The level of TiOx surface wettability was demonstrated to be controlled by the oxygen flow during the film growth process, which may additionally provide a self-cleaning property to the IR filters. By combining low refractive index layers (i.e., TiOx) with the high refractive index of the metal oxides (i.e., NiOx) along with the metal layers (i.e., Ag, Al), the photonic filtration (i.e., cutoff) of the infrared spectrum was successfully achieved while keeping the light transmittance of the visible (vis) light above 50%. Different structures with different thicknesses have been systematically assessed, including TiOx/NiOx/Ag, TiOx/NiOx/Al, TiOx/MoOx/Ag, and TiOx/MoOx/Al. Furthermore, numerical simulations were carried out using SCAPS-1D and OptiLayer software to evaluate the application of these filters on silicon solar cells, considering the experimental electrical and optical parameters for each explicit layer of the device. Our results confirm that the development of such coatings with a scalable thin film growth process may have a real commercialization potential due to their multifunctionalities such as IR filtering, antireflection coating in the vis range, and antisoiling properties.

Anti-Soiling Coatings for Enhancement of PV Panel Performance in Desert Environment: A Critical Review and Market Overview

Areas with abundant sunlight, such as the Middle East and North Africa (MENA), are optimal for photovoltaic (PV) power generation. However, the average power loss of photovoltaic modules caused by dust accumulation is extreme and may reach 1%/day, necessitating frequent cleaning which adds to the cost of operations and maintenance. One of the solutions to the problem of PV soiling is to develop anti-soil coatings, where hydrophilic or hydrophobic coatings with spectral characteristics suitable for PV applications are added to the outer layer of PV glass. However, the effectiveness of such coatings depends extensively on climatic conditions and geographical locations. Since coatings add to the cost of solar panels, it is imperative that they are first tested for suitability at the intended location and/or in similar weather conditions prior to their large-scale deployment. This critical review focuses on various anti-dust technologies employed to mitigate the PV soiling issue. The in-depth comparison of the various developed techniques and materials aims at providing a relevant input in adapting the right technology based on particles' accumulation mechanism, weather conditions, and geographical location. Though the mechanical cleaning process is the most used solution to date, development of thin film anti-dust coating could be a better alternative-when it is relevant-due to its abrasion-free capability, large deployment, economic viability, and durability. This review aims at serving as a reference in this topic, thereby paving the way to adapting efficient anti-dust coatings, especially in the MENA region and/or desert environment at large, where it is the most relevant.

Metamaterials and Metasurfaces: A Review from the Perspectives of Materials, Mechanisms and Advanced Metadevices

Throughout human history, the control of light, electricity and heat has evolved to become the cornerstone of various innovations and developments in electrical and electromagnetic technologies. Wireless communications, laser and computer technologies have all been achieved by altering the way light and other energy forms act naturally and how to manage them in a controlled manner. At the nanoscale, to control light and heat, matured nanostructure fabrication techniques have been developed in the last two decades, and a wide range of groundbreaking processes have been achieved. Photonic crystals, nanolithography, plasmonics phenomena and nanoparticle manipulation are the main areas where these techniques have been applied successfully and led to an emergent material sciences branch known as metamaterials. Metamaterials and functional material development strategies are focused on the structures of the matter itself, which has led to unconventional and unique electromagnetic properties through the manipulation of light-and in a more general picture the electromagnetic waves-in widespread manner. Metamaterial's nanostructures have precise shape, geometry, size, direction and arrangement. Such configurations are impacting the electromagnetic light waves to generate novel properties that are difficult or even impossible to obtain with natural materials. This review discusses these metamaterials and metasurfaces from the perspectives of materials, mechanisms and advanced metadevices in depth, with the aim to serve as a solid reference for future works in this exciting and rapidly emerging topic.

Research Progress of Plasmonic Nanostructure-Enhanced Photovoltaic Solar Cells

Enhancement of the electromagnetic properties of metallic nanostructures constitute an extensive research field related to plasmonics. The latter term is derived from plasmons, which are quanta corresponding to longitudinal waves that are propagating in matter by the collective motion of electrons. Plasmonics are increasingly finding wide application in sensing, microscopy, optical communications, biophotonics, and light trapping enhancement for solar energy conversion. Although the plasmonics field has relatively a short history of development, it has led to substantial advancement in enhancing the absorption of the solar spectrum and charge carrier separation efficiency. Recently, huge developments have been made in understanding the basic parameters and mechanisms governing the application of plasmonics, including the effects of nanoparticles' size, arrangement, and geometry and how all these factors impact the dielectric field in the surrounding medium of the plasmons. This review article emphasizes recent developments, fundamentals, and fabrication techniques for plasmonic nanostructures while investigating their thermal effects and detailing light-trapping enhancement mechanisms. The mismatch effect of the front and back light grating for optimum light trapping is also discussed. Different arrangements of plasmonic nanostructures in photovoltaics for efficiency enhancement, plasmonics' limitations, and modeling performance are also deeply explored.

Hydrophilic Antireflection and Antidust Silica Coatings

We report on the optical and morphological properties of silica thin layers deposited by reactive RF magnetron sputtering of a SiO2 target under different oxygen to total flow ratios [r(O2) = O2/Ar, ranging from 0 to 25%]. The refractive index (n), extinction coefficient, total transmission, and total reflectance were systematically investigated, while field-emission scanning electron microscopy, atomic force microscopy, and three-dimensional (3D) average roughness data construction measurements were carried out to probe the surface morphology. Contact angle measurements were performed to assess the hydrophilicity of our coatings as a function of the oxygen content. We performed a thorough numerical analysis using 1D-solar cell capacitance simulator (SCAPS-1D) based on the measured experimental optical properties to simulate the photovoltaic (PV) device performance, where a clear improvement in the photoconversion efficiency from 25 to 26.5% was clearly observed with respect to r(O2). Finally, a computational analysis using OptiLayer confirmed a minimum total reflectance of less than 0.4% by coupling a silica layer with n = 1.415 with another high-refractive-index (i.e., >2) oxide layer. These promising results pave the way for optimization of silica thin films as efficient antireflection and self-cleaning coatings to display better PV performance in a variety of locations including a desert environment.

Functionalized single-walled carbon-nanotube-blended P3HT-based high performance memory behavior thin-film transistor devices

We report on the fabrication and transport properties of single-walled carbon nanotubes (SWCNT) blended with P3HT (poly 3-hexyl thiophene-2, 5-diyl). The composite is used as a hybrid organic active channel transistor. The performances of the fabricated devices were investigated as a function of the SWCNTs' loads in the composite, and their response evaluated under white light illumination. Our results show that for SWCNT loads ≤1.5 wt%, all the devices behave as p-type transistors, exhibiting excellent performance, with an I _on /I _off ratio of 10⁴ and a maximum on-state current (I _on) exceeding 80 μA. Moreover, compared with pristine transistors with a P3HT channel, the Hall mobility of these hybrid TFTs was found to increase by more than one order of magnitude, i.e. increasing from 0.062 to 1.54 cm² V^-1 s^-1. Finally, under light illumination, the transfer characteristics (i.e. I _DS as a function of V _GS) were found to systematically undergo a typical shift together with a fully-reversible memory behavior. A fundamental understanding of this work can assist in providing new routes for the development of reliable efficient hybrid organic-based optoelectronic devices.

Enhanced UV photoresponse of KrF-laser-synthesized single-wall carbon nanotubes/n-silicon hybrid photovoltaic devices

We report on the KrF-laser ablation synthesis, purification and photocurrent generation properties of single-wall carbon nanotubes (SWCNTs). The thermally purified SWCNTs are integrated into hybrid photovoltaic (PV) devices by spin-coating them onto n-Si substrates. These novel SWCNTs/n-Si hybrid devices are shown to generate significant photocurrent (PC) over the entire 250-1050 nm light spectrum with external quantum efficiencies (EQE) reaching up to ~23%. Our SWCNTs/n-Si hybrid devices are not only photoactive in the traditional spectral range of Si solar cells, but generate also significant PC in the UV domain (below 400 nm). This wider spectral response is believed to be the result of PC generation from both the SWCNTs themselves and the tremendous number of local p-n junctions created at the nanotubes/Si interface. To assess the prevalence of these two contributions, the EQE spectra and J-V characteristics of these hybrid devices were investigated in both planar and top-down configurations, as a function of SWCNTs' film thickness. A sizable increase in EQE in the near UV with respect to the silicon is observed in both configurations, with a more pronounced UV photoresponse in the planar mode, confirming thereby the role of SWCNTs in the photogeneration process. The PC generation is found to reach its maximum for an optimal the SWCNT film thickness, which is shown to correspond to the best trade-off between lowest electrical resistance and highest optical transparency. Finally, by analyzing the J-V characteristics of our SWCNTs/n-Si devices with an equivalent circuit model, we were able to point out the contribution of the various electrical components involved in the photogeneration process. The SWCNTs-based devices demonstrated here open up the prospect for their use in highly effective photovoltaics and/or UV-light sensors.

Solid-state diffusion as an efficient doping method for silicon nanowires and nanowire field effect transistors

In this work we investigate doping by solid-state diffusion from a doped oxide layer, obtained by plasma-enhanced chemical vapor deposition (PECVD), as a means for selectively doping silicon nanowires (NWs). We demonstrate both n-type (phosphorous) and p-type (boron) doping up to concentrations of 10(20) cm(-3), and find that this doping mechanism is more efficient for NWs as opposed to planar substrates. We observe no diameter dependence in the range of 25 to 80 nm, which signifies that the NWs are uniformly doped. The drive-in temperature (800-950 °C) can be used to adjust the actual doping concentration in the range 2 × 10(18) to 10(20) cm(-3). Furthermore, we have fabricated NMOS and PMOS devices to show the versatility of this approach and the possibility of achieving segmented doping of NWs. The devices show high I(on)/I(off) ratios of around 10(7) and, especially for the PMOS, good saturation behavior and low hysteresis.

Probing the electronic structure of carbon nanotubes by nanoscale spectroscopy

Among the carbon allotropes newly discovered during the last few decades, carbon nanotubes (CNTs) have attracted enormous attention due to their structural and electronic properties with strong one dimensional character. The physical and chemical features of such systems are intrinsically rich and complex, and can only be probed by using multiple experimental and theoretical techniques. In this feature, we focus on the structural and electronic properties of CNTs that can be accessed by using transmission electron energy loss spectroscopies. The latter are complementary to optical and X-ray absorption techniques, yet allow to obtain the electronic structure with nanoscale spatial resolution. An improved understanding of the structure-electronic properties relationship of these unique 1D systems would represent a fundamental advance, and holds the promise of using CNTs in future applications.