Strain effects on the SERS enhancements for spherical silver nanoparticles

Impact of Graphene Oxide on SERS Enhancement of Arylated Gold Nanospheres: Mechanistic Insight

The performance of gold nanospheres as substrates for surface-enhanced Raman spectroscopy (SERS) investigation has been compromised by their low adsorption efficiency, high colloidal dispersibility, and diminishing hot spots. However, gold nanosphere substrates modified using aryldiazonium gold(III) chemistry via durable gold-carbon bonds are promising for SERS enhancement due to their controlled organic layer density. In this study, arylated gold nanospheres AuNSs-COOH have shown SERS enhancement when incorporated into graphene oxide (GO) to form nanocomposites (NCs) labeled AuNSs-COOH/GO (AuNCs). Our investigation using X-ray photoelectron spectroscopy (XPS) surface analysis showed that the gold-aryl nanospheres reached their maximum SERS enhancement with an optimal coating. The evaluation included the Au 4f chemical environment and compact graphitic layers for the SERS substrate optimization. The fabricated AuNC substrates demonstrated superior efficiency and reproducibility. A broad linear range of 10-3-10-7 M 4-nitrophenol detection was obtained with exceptional repeatability, as evidenced by the relative standard deviation (RSD) of 9.32%. A detailed investigation of the energy profiles, particularly the valence band maximum (VBM) and band gap values of the substrate and analyte, depicted the electromagnetic (EM) and charge-transfer-induced enhancement and the role of GO inclusion in substrate efficiency in SERS enhancement mechanisms. The finite-difference time domain (FDTD) simulation results revealed that AuNCs incorporated with graphitic nanostructures exhibited the most substantial SERS effect through an EM field enhancement mechanism. This study demonstrated significant SERS enhancement using gold-aryl nanospheres when modified with GO, in contrast to the typical reliance on anisotropic nanostructures.

Controlling the Nanoscale Gaps on Silver Island Film for Efficient Surface-Enhanced Raman Spectroscopy

We control the nanoscale gaps on silver island films by different processing methods and investigate the surface-enhanced Raman scattering (SERS) efficiency on the films. We propose a facile technique to control the film morphology by substrate bending while keeping the evaporation rate constant. The films developed by our new method are compared to the films developed by traditional methods at various evaporation rates. The SERS signals generated on the samples prepared by the new method have similar strengths as the traditional methods. Substrate bending allows us to reduce the gap sizes while using a higher evaporation rate, hence the film can be developed in a shorter time. This cost-effective and time-efficient method is suitable for the mass production of large-area SERS sensors with good sensitivity. Scanning electron microscope images are analyzed to quantify the gap densities and widths to elucidate the relationship between the film morphology and the SERS intensity. While the gap size appears to be the major factor influencing the enhancement, the shape of the nano-island also seems to influence the SERS efficiency.

Synergy between nanomaterials and volatile organic compounds for non-invasive medical evaluation

This article is an overview of the present and ongoing developments in the field of nanomaterial-based sensors for enabling fast, relatively inexpensive and minimally (or non-) invasive diagnostics of health conditions with follow-up by detecting volatile organic compounds (VOCs) excreted from one or combination of human body fluids and tissues (e.g., blood, urine, breath, skin). Part of the review provides a didactic examination of the concepts and approaches related to emerging sensing materials and transduction techniques linked with the VOC-based non-invasive medical evaluations. We also present and discuss diverse characteristics of these innovative sensors, such as their mode of operation, sensitivity, selectivity and response time, as well as the major approaches proposed for enhancing their ability as hybrid sensors to afford multidimensional sensing and information-based sensing. The other parts of the review give an updated compilation of the past and currently available VOC-based sensors for disease diagnostics. This compilation summarizes all VOCs identified in relation to sickness and sampling origin that links these data with advanced nanomaterial-based sensing technologies. Both strength and pitfalls are discussed and criticized, particularly from the perspective of the information and communication era. Further ideas regarding improvement of sensors, sensor arrays, sensing devices and the proposed workflow are also included.

LSPR Tuning from 470 to 800 nm and Improved Stability of Au-Ag Nanoparticles Formed by Gold Deposition and Rebuilding in the Presence of Poly(styrenesulfonate)

Stability and precise control over functional properties of metal nanoparticles remain a challenge for the realization of prospective applications. Our described process of shell formation and rebuilding can address both these challenges. Template silver nanoparticles (AgNPs) stabilized by poly(styrenesulfonate) are first transformed with gold deposition, after which the resulting shell rebuilds with the replaced silver. The shell formation and rebuilding are accompanied by large shifts in localized surface plasmon resonance (LSPR) peak position, which enables LSPR tuning in a range from 470 to 800 nm. Furthermore, chemical stability of Au-AgNPs is significantly improved compared to AgNPs due to gold stability. Silver templates of different shapes and sizes were demonstrated to transform to AuAg composite NPs to further extend the accessible LSPR range tuning. Stabilization of template AgNPs with poly(styrenesulfonate), in contrast to commonly used poly(vinylpyrrolidone), was found to be a key factor for shell rebuilding. The developed Au-AgNPs were shown to be advantageous for surface plasmon resonance (SPR) detection and surface-enhanced Raman spectroscopy (SERS) owing to their tunable LSPR and enhanced stability.

Tuning Localized Surface Plasmon Resonance Wavelengths of Silver Nanoparticles by Mechanical Deformation

We describe a simple technique to alter the shape of silver nanoparticles (AgNPs) by rolling a glass tube over them to mechanically compress them. The resulting shape change in turn induces a red-shift in the localized surface plasmon resonance (LSPR) scattering spectrum and exposes new surface area. The flattened particles were characterized by optical and electron microscopy, single nanoparticle scattering spectroscopy, and surface enhanced Raman spectroscopy (SERS). AFM and SEM images show that the AgNPs deform into discs; increasing the applied load from 0 to 100 N increases the AgNP diameter and decreases the height. This deformation caused a dramatic red shift in the nanoparticle scattering spectrum and also generated new surface area to which thiolated molecules could attach as evident from SERS measurements. The simple technique employed here requires no lithographic templates and has potential for rapid, reproducible, inexpensive and scalable tuning of nanoparticle shape, surface area, and resonance while preserving particle volume.

Colloidal Nanoantennas for Hyperspectral Chemical Mapping

Tip-enhanced Raman spectroscopy enables access to chemical information with nanoscale spatial resolution and single-molecule sensitivities by utilizing optical probes that are capable of confining light to subwavelength dimensions. Because the probes themselves possess nanoscale features, they are notoriously difficult to fabricate, and more critically, can result in poor reproducibility. Here, we demonstrate high-performance, predictable, and readily tunable nanospectroscopy probes that are fabricated by self-assembly. Shaped metal nanoparticles are organized into dense layers and deposited onto scanning probe tips. When coupled to a metal surface, these probes behave like nanoantenna by supporting a strong optical resonance, producing dramatic Raman field enhancements in the range of 10(8)-10(9) with sub-50 nm spatial resolution. In contrast to other nanospectroscopy probes, our colloidal probes can be fabricated in a scalable fashion with a batch-to-batch reproducibility of ∼80% and serve as an important demonstration of bottom-up engineering.

Nanoscale Sensor Technologies for Disease Detection via Volatolomics

The detection of many diseases is missed because of delayed diagnoses or the low efficacy of some treatments. This emphasizes the urgent need for inexpensive and minimally invasive technologies that would allow efficient early detection, stratifying the population for personalized therapy, and improving the efficacy of rapid bed-side assessment of treatment. An emerging approach that has a high potential to fulfill these needs is based on so-called "volatolomics", namely, chemical processes involving profiles of highly volatile organic compounds (VOCs) emitted from body fluids, including breath, skin, urine and blood. This article presents a didactic review of some of the main advances related to the use of nanomaterial-based solid-state and flexible sensors, and related artificially intelligent sensing arrays for the detection and monitoring of disease with volatolomics. The article attempts to review the technological gaps and confounding factors related to VOC testing. Different ways to choose nanomaterial-based sensors are discussed, while considering the profiles of targeted volatile markers and possible limitations of applying the sensing approach. Perspectives for taking volatolomics to a new level in the field of diagnostics are highlighted.

Flexible sensors based on nanoparticles

Flexible sensors can be envisioned as promising components for smart sensing applications, including consumer electronics, robotics, prosthetics, health care, safety equipment, environmental monitoring, homeland security and space flight. The current review presents a concise, although admittedly nonexhaustive, didactic review of some of the main concepts and approaches related to the use of nanoparticles (NPs) in flexible sensors. The review attempts to pull together different views and terminologies used in the NP-based sensors, mainly those established via electrical transduction approaches, including, but, not confined to: (i) strain-gauges, (ii) flexible multiparametric sensors, and (iii) sensors that are unaffected by mechanical deformation. For each category, the review presents and discusses the common fabrication approaches and state-of-the-art results. The advantages, weak points, and possible routes for future research, highlighting the challenges for NP-based flexible sensors, are presented and discussed as well.