Doping of graphene exfoliated on SrTiO3

Two-Dimensional Layered Materials Meet Perovskite Oxides: A Combination for High-Performance Electronic Devices

As the Si-based transistors scale down to atomic dimensions, the basic principle of current electronics, which heavily relies on the tunable charge degree of freedom, faces increasing challenges to meet the future requirements of speed, switching energy, heat dissipation, and packing density as well as functionalities. Heterogeneous integration, where dissimilar layers of materials and functionalities are unrestrictedly stacked at an atomic scale, is appealing for next-generation electronics, such as multifunctional, neuromorphic, spintronic, and ultralow-power devices, because it unlocks technologically useful interfaces of distinct functionalities. Recently, the combination of functional perovskite oxides and two-dimensional layered materials (2DLMs) led to unexpected functionalities and enhanced device performance. In this paper, we review the recent progress of the heterogeneous integration of perovskite oxides and 2DLMs from the perspectives of fabrication and interfacial properties, electronic applications, and challenges as well as outlooks. In particular, we focus on three types of attractive applications, namely field-effect transistors, memory, and neuromorphic electronics. The van der Waals integration approach is extendible to other oxides and 2DLMs, leading to almost unlimited combinations of oxides and 2DLMs and contributing to future high-performance electronic and spintronic devices.

Low-Temperature CVD-Grown Graphene Thin Films as Transparent Electrode for Organic Photovoltaics

Good conductivity, suitable transparency and uniform layers of graphene thin film can be produced by chemical vapour deposition (CVD) at low temperature and utilised as a transparent electrode in organic photovoltaics. Using chlorobenzene trapped in poly(methyl methacrylate) (PMMA) polymer as the carbon source, growth temperature (Tgrowth) of 600 °C at hydrogen (H2) flow of 75 standard cubic centimetres per minute (sccm) was used to prepare graphene by CVD catalytically on copper (Cu) foil substrates. Through the Tgrowth of 600 °C, we observed and identified the quality of the graphene films, as characterised by Raman spectroscopy. Finally, P3HT (poly (3-hexylthiophene-2, 5-diyl)): PCBM (phenyl-C61-butyric acid methyl ester) bulk heterojunction solar cells were fabricated on graphene-based window electrodes and compared with indium tin oxide (ITO)-based devices. It is interesting to observe that the OPV performance is improved more than 5 fold with increasing illuminated areas, hinting that high resistance between graphene domains can be alleviated by photo generated charges.

Interfacial coupling effects on adsorptive and photocatalytic performances for photoresponsive graphene-wrapped SrTiO3@Ag under UV-visible light: experimental and DFT approach

Understanding the graphene/semiconductor/metal interactions is crucial to design innovative photocatalytic materials with efficient photocatalytic activity for environmental cleanup applications. SrTiO₃ on reduced graphene oxide (rGO) with various graphene contents was successfully synthesized in this study utilizing a simple hydrothermal method, followed by decorating the surface with Ag particles by using the photodeposition process. Under UV-visible light irradiation, the resulting composites were tested for their improved photocatalytic activity to decompose methylene blue (MB). The prepared photocatalysts were characterized by XRD, SEM, EDX, DLS, FT-IR, Raman spectroscopy, and DRS. First-principle density functional theory calculations (DFT) were also carried out by using the generalized gradient approximation (GGA) and PBE functional with the addition of on-site Coulomb correction (GGA + U). The obtained SrTiO₃/rGO@Ag composites showed great improvement in the photocatalytic performances over pristine SrTiO₃. For the degradation reaction of MB, SrTiO₃/rGO_20%@Ag_4% composites yielded the best photocatalytic activity with efficacy reach 94%, which was also shown that it could be recycled up to four times with nearly unchanged photocatalytic activity.

Synergetic Behavior in 2D Layered Material/Complex Oxide Heterostructures

The marriage between a 2D layered material (2DLM) and a complex transition metal oxide (TMO) results in a variety of physical and chemical phenomena that cannot be achieved in either material alone. Interesting recent discoveries in systems such as graphene/SrTiO₃ , graphene/LaAlO₃ /SrTiO₃ , graphene/ferroelectric oxide, MoS₂ /SrTiO₃ , and FeSe/SrTiO₃ heterostructures include voltage scaling in field-effect transistors, charge state coupling across an interface, quantum conductance probing of the electrochemical activity, novel memory functions based on charge traps, and greatly enhanced superconductivity. In this context, various properties and functionalities appearing in numerous different 2DLM/TMO heterostructure systems are reviewed. The results imply that the multidimensional heterostructure approach based on the disparate material systems leads to an entirely new platform for the study of condensed matter physics and materials science. The heterostructures are also highly relevant technologically as each constituent material is a promising candidate for next-generation optoelectronic devices.

Quantum Conductance Probing of Oxygen Vacancies in SrTiO3 Epitaxial Thin Film using Graphene

Quantum Hall conductance in monolayer graphene on an epitaxial SrTiO₃ (STO) thin film is studied to understand the role of oxygen vacancies in determining the dielectric properties of STO. As the gate-voltage sweep range is gradually increased in the device, systematic generation and annihilation of oxygen vacancies, evidenced from the hysteretic conductance behavior in the graphene, are observed. Furthermore, based on the experimentally observed linear scaling relation between the effective capacitance and the voltage sweep range, a simple model is constructed to manifest the relationship among the dielectric properties of STO with oxygen vacancies. The inherent quantum Hall conductance in graphene can be considered as a sensitive, robust, and noninvasive probe for understanding the electronic and ionic phenomena in complex transition-metal oxides without impairing the oxide layer underneath.

Voltage Scaling of Graphene Device on SrTiO3 Epitaxial Thin Film

Electrical transport in monolayer graphene on SrTiO3 (STO) thin film is examined in order to promote gate-voltage scaling using a high-k dielectric material. The atomically flat surface of thin STO layer epitaxially grown on Nb-doped STO single-crystal substrate offers good adhesion between the high-k film and graphene, resulting in nonhysteretic conductance as a function of gate voltage at all temperatures down to 2 K. The two-terminal conductance quantization under magnetic fields corresponding to quantum Hall states survives up to 200 K at a magnetic field of 14 T. In addition, the substantial shift of charge neutrality point in graphene seems to correlate with the temperature-dependent dielectric constant of the STO thin film, and its effective dielectric properties could be deduced from the universality of quantum phenomena in graphene. Our experimental data prove that the operating voltage reduction can be successfully realized due to the underlying high-k STO thin film, without any noticeable degradation of graphene device performance.

Graphene on mica - intercalated water trapped for life

In this work we study the effect of thermal processing of exfoliated graphene on mica with respect to changes in graphene morphology and surface potential. Mild annealing to temperatures of about 200°C leads to the removal of small amounts of intercalated water at graphene edges. By heating to 600°C the areas without intercalated water are substantially increased enabling a quantification of the charge transfer properties of the water layer by locally resolved Kelvin probe force microscopy data. A complete removal on a global scale cannot be achieved because mica begins to decompose at temperatures above 600°C. By correlating Kelvin probe force microscopy and Raman spectroscopy maps we find a transition from p-type to n-type doping of graphene during thermal processing which is driven by the dehydration of the mica substrate and an accumulation of defects in the graphene sheet.

Routes to rupture and folding of graphene on rough 6H-SiC(0001) and their identification

Twisted few layer graphene (FLG) is highly attractive from an application point of view, due to its extraordinary electronic properties. In order to study its properties, we demonstrate and discuss three different routes to in situ create and identify (twisted) FLG. Single layer graphene (SLG) sheets mechanically exfoliated under ambient conditions on 6H-SiC(0001) are modified by (i) swift heavy ion (SHI) irradiation, (ii) by a force microscope tip and (iii) by severe heating. The resulting surface topography and the surface potential are investigated with non-contact atomic force microscopy (NC-AFM) and Kelvin probe force microscopy (KPFM). SHI irradiation results in rupture of the SLG sheets, thereby creating foldings and bilayer graphene (BLG). Applying the other modification methods creates enlarged (twisted) graphene foldings that show rupture along preferential edges of zigzag and armchair type. Peeling at a folding over an edge different from a low index crystallographic direction can result in twisted BLG, showing a similar height as Bernal (or AA-stacked) BLG in NC-AFM images. The rotational stacking can be identified by a significant contrast in the local contact potential difference (LCPD) measured by KPFM.

Standardization of surface potential measurements of graphene domains

We compare the three most commonly used scanning probe techniques to obtain a reliable value of the work function in graphene domains of different thickness. The surface potential (SP) of graphene is directly measured in Hall bar geometry via a combination of electrical functional microscopy and spectroscopy techniques, which enables calibrated work function measurements of graphene domains in ambient conditions with values Φ1LG ~4.55 ± 0.02 eV and Φ2LG ~ 4.44 ± 0.02 eV for single- and bi-layer, respectively. We demonstrate that frequency-modulated Kelvin probe force microscopy (FM-KPFM) provides more accurate measurement of the SP than amplitude-modulated (AM)-KPFM. The discrepancy between experimental results obtained by different techniques is discussed. In addition, we use FM-KPFM for contactless measurements of the specific components of the device resistance. We show a strong non-Ohmic behavior of the electrode-graphene contact resistance and extract the graphene channel resistivity.

Electronic characterization of single-layer MoS2 sheets exfoliated on SrTiO3

Single layer regions of MoS2 on SiO2 and SrTiO3 were identified by Raman spectroscopy and μ-photoluminescence before Kelvin probe force microscopy was performed. For the already known system MoS2/SiO2 we find 1.839 eV for the direct bandgap, in good agreement with earlier results. On MoS2/SrTiO3 the direct bandgap was determined to be 1.829 eV. From our Kelvin probe data we infer that the SrTiO3 substrate leads to a dipole layer at the interface of the MoS2 single layer. The corresponding μ-PL measurements however show no significant decrease of the bandgap. This shows, that in the case of MoS2 the carrier type as well as concentration is not significantly influenced by the choice of SrTiO3 as the substrate compared to SiO2.

Laser cleaning of exfoliated graphene

We have employed atomic force and Kelvin-Probe force microscopy to study graphene sheets exfoliated on TiO2 under the influence of local heating achieved by laser irradiation. Exfoliation and irradiation took place under ambient conditions, the measurements were performed in ultra high vacuum. We show that after irradiation times of 6 min, an increase of the surface potential is observed which indicates a decrease of p-type carrier concentration. We attribute this effect to the removal of adsorbates like water and oxygen. After irradiation times of 12 min our topography images reveal severe structural modifications of graphene. These resemble the nanocrystallite network which form on graphene/SiO2 but after much longer irradiation times. From our results we propose that short laser heating at moderate powers might offer a way to clean graphene without inducing unwanted structural modifications.