Temperature effect on electrospinning of nanobelts: the case of hafnium oxide

Hollow Hafnium Oxide (HfO2) Fibers: Using an Effective Combination of Sol-Gel, Electrospinning, and Thermal Degradation Pathway

In recent years, hafnium oxide (HfO2) has gained increasing interest because of its high dielectric constant, excellent thermal stability, and high band gap. Although HfO2 bulk and film materials have been prepared and well-studied, HfO2 fibers, especially hollow fibers, have been less investigated. In this study, we present a facile preparation method for HfO2 hollow fibers through a unique integration of the sol-gel process and electrospinning technique. Initially, polystyrene (PS) fibers are fabricated by using electrospinning, followed by dipping in a HfO2 precursor solution, resulting in HfO2-coated PS fibers. Subsequent thermal treatment at 800 °C ensures the selective pyrolysis of the PS fibers and complete condensation of the HfO2 precursors, forming HfO2 hollow fibers. Scanning electron microscopy (SEM) characterizations reveal HfO2 hollow fibers with rough surfaces and diminished diameters, a transformation attributed to the removal of the PS fibers and the condensation of the HfO2 precursors. Our study also delves into the influence of precursor solution molar ratios, showcasing the ability to achieve smaller HfO2 fiber diameters with reduced precursor quantities. Validation of the material composition is achieved through thermogravimetric analysis (TGA) and energy-dispersive spectroscopy (EDS) mapping. Additionally, X-ray diffraction (XRD) analysis provides insights into the crystallinity of the HfO2 hollow fibers, highlighting a higher crystallinity in fibers annealed at 800 °C compared with those treated at 400 °C. Notably, the HfO2 hollow fibers demonstrate a water contact angle (WCA) of 38.70 ± 5.24°, underscoring the transformation from hydrophobic to hydrophilic properties after the removal of the PS fibers. Looking forward, this work paves the way for extensive research on the surface properties and potential applications of HfO2 hollow fibers in areas such as filtration, energy storage, and memory devices.

Electrospun nanofibers: promising nanomaterials for biomedical applications

With the rapid development of nanotechnology and nanomaterials science, electrospun nanofibers emerged as a new material with great potential for a variety of applications. Electrospinning is a simple and adaptable process for generation of nanofibers from a viscoelastic fluid using electrostatic repulsion between surface charges. Electrospinning has been used to manufacture nanofibers with low diameters from a wide range of materials. Electrospinning may also be used to construct nanofibers with a variety of secondary structures, including those having a porous, hollow, or core–sheath structure. Due to many attributes including their large specific surface area and high porosity, electrospun nanofibers are suitable for biosensing and environmental monitoring. This book chapter discusses the different methods of nanofiber preparations and the challenges involved, recent research progress in electrospun nanofibers, and the ways to commercialize these nanofiber materials.

A Bibliometric Analysis of Electrospun Nanofibers for Dentistry

Electrospun nanofibers have been widely used in dentistry due to their excellent properties, such as high surface area and high porosity, this bibliometric study aimed to review the application fields, research status, and development trends of electrospun nanofibers in different fields of dentistry in recent years. All of the data were obtained from the Web of Science from 2004 to 2021. Origin, Microsoft Excel, VOSviewer, and Carrot² were used to process, analyze, and evaluate the publication year, countries/region, affiliations, authors, citations, keywords, and journal data. After being refined by the year of publication, document types and research fields, a total of 378 publications were included in this study, and an increasing number of publications was evident. Through linear regression calculations, it is predicted that the number of published articles in 2022 will be 66. The most published journal about electrospun dental materials is Materials Science & Engineering C-Materials for Biological Applications, among the six core journals identified, the percent of journals with Journal Citation Reports (JCR) Q1 was 60%. A total of 17.60% of the publications originated from China, and the most productive institution was the University of Sheffield. Among all the 1949 authors, the most productive author was Marco C. Bottino. Most electrospun dental nanofibers are used in periodontal regeneration, and Polycaprolactone (PCL) is the most frequently used material in all studies. With the global upsurge in research on electrospun dental materials, bone regeneration, tissue regeneration, and cell differentiation and proliferation will still be the research hotspots of electrospun dental materials in recent years. Extensive collaboration and citations among authors, institutions and countries will also reach a new level.

Electrospun Nanofibers of Natural and Synthetic Polymers as Artificial Extracellular Matrix for Tissue Engineering

Many types of polymer nanofibers have been introduced as artificial extracellular matrices. Their controllable properties, such as wettability, surface charge, transparency, elasticity, porosity and surface to volume proportion, have attracted much attention. Moreover, functionalizing polymers with other bioactive components could enable the engineering of microenvironments to host cells for regenerative medical applications. In the current brief review, we focus on the most recently cited electrospun nanofibrous polymeric scaffolds and divide them into five main categories: natural polymer-natural polymer composite, natural polymer-synthetic polymer composite, synthetic polymer-synthetic polymer composite, crosslinked polymers and reinforced polymers with inorganic materials. Then, we focus on their physiochemical, biological and mechanical features and discussed the capability and efficiency of the nanofibrous scaffolds to function as the extracellular matrix to support cellular function.

Structural design and environmental applications of electrospun nanofibers

Nanofibers have attracted extensive attention and been applied in various fields due to their high aspect ratio, high specific surface area, flexibility, structural abundance, etc. The electrospinning method is one of the most promising and effective ways to produce nanofibers. The electrospun nanofibers-based films and membranes have already been demonstrated to possess small pore sizes, larges specific surface area, and can be grafted with different functionalities to adapt to various purposes. The environmental applications of nanofibers are one of the essential application fields, and great achievements have been made in this field. To well summarize the development of nanofibers and their environmental applications, we review the nanofiber fabrication methods, advanced fiber structures, and their applications in the field of air filtration, heavy metal removal, and self-cleaning surface. We hope this review and summary can provide readers a comprehensive understanding of the structural design and environmental applications of electrospun nanofibers.

Electrospun fibers and their application in drug controlled release, biological dressings, tissue repair, and enzyme immobilization

Electrospinning is a method of preparing microfibers or nanofibers by using an electrostatic force to stretch the electrospinning fluid. Electrospinning has gained considerable attention in many fields due to its ability to produce continuous fibers from a variety of polymers and composites in a simple way. Electrospun nanofibers have many merits such as diverse chemical composition, easily adjustable structure, adjustable diameter, high surface area, high porosity, and good pore connectivity, which give them broad application prospects in the biomedical field. This review systematically introduced the factors influencing electrospinning, the types of electrospun fibers, the types of electrospinning, and the detailed applications of electrospun fibers in controlled drug release, biological dressings, tissue repair and enzyme immobilization fields. The latest progress of using electrospun fibers in these fields was summarized, and the main challenges to be solved in electrospinning technology were put forward.

Interface/defect-tuneable macro and micro photoluminescence behaviours of trivalent europium ions in electrospun ZrO2/ZnO porous nanobelts

It was demonstrated that suitable interfaces between two materials can enhance the separation of photogenerated carriers. In this study, ZrO₂/ZnO interfaces with type I structure were designed and prepared by the electrospinning technique. The obtained ZrO₂/ZnO:Eu³⁺ (ZZOE) composites are highly porous in the form of nanobelts with width of 600-700 nm, comprising ZnO and ZrO₂ nanocrystals, and the Eu doping can hinder the t-m phase transition of ZrO₂. By tuning the annealing temperature, the inner stress and defects can be well controlled to improve the photoluminescence (PL) of the ZZOE porous nanobelts. Macro- and micro-PL spectra indicated that the body oxygen vacancies benefit the PL from Eu³⁺ ions, whereas the surficial ones do not. The optimal parameters for the preparation of ZZOE porous nanobelts were also investigated. Finally, a charge transfer mechanism was proposed to illuminate the PLs from the ZZOE porous nanobelts.

Emulsion-based systems for fabrication of electrospun nanofibers: food, pharmaceutical and biomedical applications

Encapsulation of bioactive materials and drugs using the emulsion electrospinning method.

Width-controlled M-type hexagonal strontium ferrite (SrFe12O19) nanoribbons with high saturation magnetization and superior coercivity synthesized by electrospinning

Width-controlled M-type hexagonal SrFe12O19 nanoribbons were synthesized for the first time via polyvinylpyrrolidone (PVP) sol assisted electrospinning followed by heat treatment in air, and their chemical composition, microstructure and magnetic performance were investigated. Results demonstrated that as-obtained SrFe12O19 nanoribbons were well-crystallized with high purity. Each nanoribbon was self-assembled by abundant single-domain SrFe12O19 nanoparticles and was consecutive on structure and uniform on width. PVP in the spinning solution played a significant influence on the microstructure features of SrFe12O19 nanoribbons. With PVP concentration increasing, the ribbon-width was increased but the particle-size was reduced, which distributed on a same ribbon were more intensive, and then the ribbon-surface became flat. The room temperature magnetic performance investigation revealed that considerable large saturation magnetization (Ms) and coercivity (Hc) were obtained for all SrFe12O19 nanoribbons, and they increased with the ribbon-width broadening. The highest Ms of 67.9 emu · g(-1) and Hc of 7.31 kOe were concurrently acquired for SrFe12O19 nanoribbons with the maximum ribbon-width. Finally, the Stoner-Wohlfarth curling model was suggested to dominate the magnetization reverse of SrFe12O19 nanoribbons. It is deeply expected that this work is capable of opening up a new insights into the architectural design of 1D magnetic materials and their further utilization.

Ribbon-like and spontaneously folded structures of tungsten oxide nanofibers fabricated via electrospinning

Electrospinning of sub-100 nm thick WO₃ ribbon-like nanofibers and their periodically folded patterns is reported for the first time.

Wire-in-tube structure fabricated by single capillary electrospinning via nanoscale Kirkendall effect: the case of nickel-zinc ferrite

Wire-in-tube structures have previously been prepared using an electrospinning method by means of tuning hydrolysis/alcoholysis of a precursor solution. Nickel-zinc ferrite (Ni0.5Zn0.5Fe2O4) nanowire-in-nanotubes have been prepared as a demonstration. The detailed nanoscale characterization, formation process and magnetic properties of Ni0.5Zn0.5Fe2O4 nanowire-in-nanotubes has been studied comprehensively. The average diameters of the outer tubes and inner wires of Ni0.5Zn0.5Fe2O4 nanowire-in-nanotubes are around 120 nm and 42 nm, respectively. Each fully calcined individual nanowire-in-nanotube, either the outer-tube or the inner-wire, is composed of Ni0.5Zn0.5Fe2O4 monocrystallites stacked along the longitudinal direction with random orientation. The process of calcining electrospun polymer composite nanofibres can be viewed as a morphologically template nucleation and precursor diffusion process. This allows the nitrates precursor to diffuse toward the surface of the nanofibres while the oxides (decomposed from hydroxides and nitrates) products diffuse to the core region of the nanofibres; the amorphous nanofibres transforming thereby into crystalline nanowire-in-nanotubes. In addition, the magnetic properties of the Ni0.5Zn0.5Fe2O4 nanowire-in-nanotubes were also examined. It is believed that this nanowire-in-nanotube (sometimes called core-shell) structure, with its uniform size and well-controlled orientation of the long nanowire-in-nanotubes, is particularly attractive for use in the field of nano-fluidic devices and nano-energy harvesting devices.

Unique magnetic properties and magnetization reversal process of CoFe2O4 nanotubes fabricated by electrospinning

CoFe(2)O(4) nanotubes have been directly fabricated by single-capillary spinneret electrospinning. The external diameter of the CoFe(2)O(4) nanotubes ranges from 60 nm to 160 nm. The morphology and structure characterizations show that individual CoFe(2)O(4) nanotubes are made of CoFe(2)O(4) nanocrystals stacking along the nanotubes with no preferred growth directions and these individual nanocrystals are single crystal with a cubic spinel structure. Each nanocrystal was shown to be a single magnetic domain. The magnetic measurements show that the coercivity (H(c)) of the CoFe(2)O(4) nanotubes decreases from 10 400 Oe at 5 K to 300 Oe at 360 K. The CoFe(2)O(4) nanotubes have a spin reorientation (SR) at 5 K, which is different from CoFe(2)O(4) nanorods and nanoparticles. Based on the observed morphology and crystal structure, a micromagnetic model, "chain-of-rings", is developed to interpret the magnetic behavior of the CoFe(2)O(4) nanotubes. The theoretical coercivity (534 Oe) is in good agreement with the experimental results (509 Oe). It is believed that our work should open a new route to prepare various magnetic ferrite nanotubes and is significant for expanding the application of CoFe(2)O(4) into the new fields.

A simple method for the preparation of hollow ZnO nanospheres for use as a high performance photocatalyst

We have used classical electrospinning and subsequent thermal treatment to successfully fabricate hollow ZnO nanospheres. The hollow ZnO nanospheres were then used to study the degradation of Rhodamine B (RhB) dye and were proven to have excellent photocatalytic activity. The mechanism of formation of hollow ZnO nanospheres and the reason for the high photocatalytic activity were also investigated.