Direct nanoimprint lithography of Al₂O₃ using a chelated monomer-based precursor

Non-Absorbing Dielectric Materials for Surface-Enhanced Spectroscopies and Chiral Sensing in the UV

Low-loss dielectric nanomaterials are being extensively studied as novel platforms for enhanced light-matter interactions. Dielectric materials are more versatile than metals when nanostructured as they are able to generate simultaneously electric- and magnetic-type resonances. This unique property gives rise to a wide gamut of new phenomena not observed in metal nanostructures such as directional scattering conditions or enhanced optical chirality density. Traditionally studied dielectrics such as Si, Ge or GaP have an operating range constrained to the infrared and/or the visible range. Tuning their resonances up to the UV, where many biological samples of interest exhibit their absorption bands, is not possible due to their increased optical losses via heat generation. Herein, we report a quantitative survey on the UV optical performance of 20 different dielectric nanostructured materials for UV surface light-matter interaction based applications. The near-field intensity and optical chirality density averaged over the surface of the nanoparticles together with the heat generation are studied as figures of merit for this comparative analysis.

Refractive index sensing and surface-enhanced Raman spectroscopy using silver-gold layered bimetallic plasmonic crystals

Herein we describe the fabrication and characterization of Ag and Au bimetallic plasmonic crystals as a system that exhibits improved capabilities for quantitative, bulk refractive index (RI) sensing and surface-enhanced Raman spectroscopy (SERS) as compared to monometallic plasmonic crystals of similar form. The sensing optics, which are bimetallic plasmonic crystals consisting of sequential nanoscale layers of Ag coated by Au, are chemically stable and useful for quantitative, multispectral, refractive index and spectroscopic chemical sensing. Compared to previously reported homometallic devices, the results presented herein illustrate improvements in performance that stem from the distinctive plasmonic features and strong localized electric fields produced by the Ag and Au layers, which are optimized in terms of metal thickness and geometric features. Finite-difference time-domain (FDTD) simulations theoretically verify the nature of the multimode plasmonic resonances generated by the devices and allow for a better understanding of the enhancements in multispectral refractive index and SERS-based sensing. Taken together, these results demonstrate a robust and potentially useful new platform for chemical/spectroscopic sensing.

Large area sub-100 nm direct nanoimprinting of palladium nanostructures

We demonstrate a simple direct nanoimprinting method for fabricating palladium nanostructures that involves in situ free radical polymerization of a resin consisting of an acrylate-based crosslinker and a palladium metal precursor.

Fabrication of periodic silicon nanopillars in a two-dimensional hexagonal array with enhanced control on structural dimension and period

We present a method to fabricate well-controlled periodic silicon nanopillars (Si NPs) in hexagonal arrays using silica nanosphere (SNS) lithography (SNL) combined with metal-assisted chemical etching (MaCE). The period of the Si NPs is easily changed by using our silica nanosphere (SNS) spin-coating process, which provides excellent monolayer uniformity and coverage (>95%) over large surface areas. The size of the deposited SNS is adjusted by reactive ion etching (RIE) to produce a target diameter at a fixed period for control of the surface pattern size after a gold metal mask layer deposition. The Si NPs are etched with the MaCE technique following introduction of a Ni interfacial layer between the Si and Au catalyst layer for adhesion and improved lithographical accuracy. The result is a fast, convenient, and large-area applicable Si surface nanolithography technique for accurate and reproducible Si NP fabrication.

Fabrication of highly uniform and porous MgF2 anti-reflective coatings by polymer-based sol-gel processing on large-area glass substrates

Despite recent progress in the fabrication of magnesium fluoride (MgF2) anti-reflective coatings (ARCs), simple, effective and scalable sol-gel fabrication of MgF2 ARCs for large-area glass substrates has prospective application in various optoelectronic devices. In this paper, a polymer-based sol-gel route was devised to fabricate highly uniform and porous MgF2 ARCs on large-area glass substrates. A sol-gel precursor made of polyvinyl acetate and magnesium trifluoroacetate assisted in the formation of uniformly mesoporous MgF2 ARCs on glass substrates, leading to the attainment of a refractive index of ~1.23. Systematic optimization of the thickness of the ARC in the sub-wavelength regime led to achieving ~99.4% transmittance in the case of the porous MgF2 ARC glass. Precise control of the thickness of porous MgF2 ARC glass also resulted in a mere ~0.1% reflection, virtually eliminating reflection off the glass surface at the target wavelength. Further manipulation of the thickness of the ARC on either side of the glass substrate led to the fabrication of relatively broadband, porous MgF2 ARC glass.

Robust superamphiphobic film from electrospun TiO2 nanostructures

Rice-shaped TiO2 nanostructures are fabricated by electrospinning for creating a robust superamphiphobic coating on glass substrates. The as-fabricated TiO2 nanostructures (sintered at 500 °C) are superhydrophilic in nature which upon silanization turn into superamphiphobic surface with surface contact angle (SCA) values achieved using water (surface tension, γ = 72.1 mN/m) and hexadecane (surface tension, γ = 27.5 mN/m) being 166° and 138.5°, respectively. The contact angle hysteresis for the droplet of water and hexadecane are measured to be 2 and 12°, respectively. Thus, we have successfully fabricated superior self-cleaning coatings that possess exceptional superamphiphobic property by employing a simple, cost-effective, and scalable technique called electrospinning. Furthermore, the coating showed good mechanical and thermal stability with strong adherence to glass surface, thus revealing the potential for real applications.