Cytotoxicity of cadmium-containing quantum dots based on a study using a microfluidic chip

Toxicity of transition metal nanoparticles: A review of different experimental models in the gastrointestinal tract

The development of nanotechnology is becoming a major trend nowadays. Nanoparticles (NPs) have been widely used in fields including food, biomedicine, and cosmetics, endowing NPs more opportunities to enter the human body. It is well-known that the gut microbiome plays a key role in human health, and the exposure of intestines to NPs is unavoidable. Accordingly, the toxicity of NPs has attracted more attention than before. This review mainly highlights recent advances in the evaluation of NPs' toxicity in the gastrointestinal system from the existing cell-based experimental models, such as the original mono-culture models, co-culture models, three-dimensional (3D) culture models, and the models established on microfluidic chips, to those in vivo experiments, such as mice models, Caenorhabditis elegans models, zebrafish models, human volunteers, as well as computer-simulated toxicity models. Owing to these models, especially those more biomimetic models, the outcome of the toxicity of NPs acting in the gastrointestinal tract can get results closer to what happened inside the real human microenvironment.

Cell-membrane-inspired polymers for constructing biointerfaces with efficient molecular recognition

Fabrication of devices that accurately recognize, detect, and separate target molecules from mixtures is a crucial aspect of biotechnology for applications in medical, pharmaceutical, and food sciences. This technology has also been recently applied in solving environmental and energy-related problems. In molecular recognition, biomolecules are typically complexed with a substrate, and specific molecules from a mixture are recognized, captured, and reacted. To increase sensitivity and efficiency, the activity of the biomolecules used for capture should be maintained, and non-specific reactions on the surface should be prevented. This review summarizes polymeric materials that are used for constructing biointerfaces. Precise molecular recognition occurring at the surface of cell membranes is fundamental to sustaining life; therefore, materials that mimic the structure and properties of this particular surface are emphasized in this article. The requirements for biointerfaces to eliminate nonspecific interactions of biomolecules are described. In particular, the major issue of protein adsorption on biointerfaces is discussed by focusing on the structure of water near the interface from a thermodynamic viewpoint; moreover, the structure of polymer molecules that control the water structure is considered. Methodologies enabling stable formation of these interfaces on material surfaces are also presented.

Toxicity of different types of quantum dots to mammalian cells in vitro: An update review

Currently, there are a great quantity type of quantum dots (QDs) that has been developed by researchers. Depending on the core material, they can be roughly divided into cadmium, silver, indium, carbon and silicon QDs. And studies on the toxicity of QDs are also increasing rapidly, but in vivo tests in model animals fail to reach a consistent conclusion. Therefore, we review the literatures dealing with the cytotoxicity of QDs in mammalian cells in vitro. After a short summary of the application characteristics of five types of QDs, the fate of QDs in cells will be discussed, ranging from the uptake, transportation, sublocation and excretion. A substantial part of the review will be focused on in vitro toxicity, in which the type of QDs is combined with their adverse effect and toxic mechanism. Because of their different luminescent properties, different subcellular fate, and different degree of cytotoxicity, we provide an overview on the balance of optical stability and biocompatibility of QDs and give a short outlook on future direction of cytotoxicology of QDs.

Microfluidic-Based Platform for the Evaluation of Nanomaterial-Mediated Drug Delivery: From High-Throughput Screening to Dynamic Monitoring

Nanomaterial-based drug delivery holds tremendous promise for improving targeting capacity, biodistribution, and performance of therapeutic/diagnostic agents. Accelerating the clinical translation of current nanomedicine requires an in-depth understanding of the mechanism underlying the dynamic interaction between nanomaterials and cells in a physiological/pathophysiological-relevant condition. The introduction of the advanced microfluidic platform with miniaturized, well-controlled, and high-throughput features opens new investigation and application opportunities for nanomedicine evaluation. This review highlights the current state-of-theart in the field of 1) microfluidic-assisted in vitro assays that are capable of providing physiological-relevant flow conditions and performing high-throughput drug screening, 2) advanced organ-on-a-chip technology with the combination of microfabrication and tissue engineering techniques for mimicking microenvironment and better predicting in vivo response of nanomedicine, and 3) the integration of microdevice with various detection techniques that can monitor cell-nanoparticle interaction with high spatiotemporal resolution. Future perspectives regarding optimized on-chip disease modeling and personalized nanomedicine screening are discussed towards further expanding the utilization of the microfluidic-based platform in assessing the biological behavior of nanomaterials.

Review of in vitro toxicological research of quantum dot and potentially involved mechanisms

Quantum dots (QDs) are one of emerging engineering nanomaterials (NMs) with advantageous properties which can act as candidates for clinical imaging and diagnosis. Nevertheless, toxicological studies have proved that QDs for better or worse pose threats to diverse systems which are attributed to the release of metal ion and specific characteristics of nanoparticles (NPs), hampering the wide use of QDs to biomedical area. It has been postulated that mechanisms of toxicity evoked by QDs have implications in oxidative stress, reactive oxygen species (ROS), inflammation and release of metal ion. Meanwhile, DNA damage and disturbance of subcellular structures would occur during QDs treatment. This review is intended to conclude the cytotoxicity of QDs in multiple systems, as well as the potential mechanisms on the basis of recent literatures. Finally, toxicity-related factors are clarified, among which chirality seems to be a newly proposed influence factor that determines the destiny of cells in response to QDs. However, details of interaction between QDs and cells have not been well elucidated. Given that molecular mechanisms of QDs-induced toxicity are still not clearly elucidated, further research should be required for this meaningful topic.

Meta-analysis of cellular toxicity for cadmium-containing quantum dots

Understanding the relationships between the physicochemical properties of engineered nanomaterials and their toxicity is critical for environmental and health risk analysis. However, this task is confounded by material diversity, heterogeneity of published data and limited sampling within individual studies. Here, we present an approach for analysing and extracting pertinent knowledge from published studies focusing on the cellular toxicity of cadmium-containing semiconductor quantum dots. From 307 publications, we obtain 1,741 cell viability-related data samples, each with 24 qualitative and quantitative attributes describing the material properties and experimental conditions. Using random forest regression models to analyse the data, we show that toxicity is closely correlated with quantum dot surface properties (including shell, ligand and surface modifications), diameter, assay type and exposure time. Our approach of integrating quantitative and categorical data provides a roadmap for interrogating the wide-ranging toxicity data in the literature and suggests that meta-analysis can help develop methods for predicting the toxicity of engineered nanomaterials.

A Review of Molecular Mechanisms Involved in Toxicity of Nanoparticles

In recent decades, the use of nanomaterials has received much attention in industrial and medical fields. However, some reports have mentioned adverse effects of these materials on the biological systems and cellular components. There are several major mechanisms for cytotoxicity of nanoparticles (NPs) such as physicochemical properties, contamination with toxic element, fibrous structure, high surface charge and radical species generation. In this review, a brief key mechanisms involved in toxic effect of NPs are given, followed by the in vitro toxicity assays of NPs and prooxidant effects of several NPs such as carbon nanotubes, titanium dioxide NPs, quantum dots, gold NPs and silver NPs.

Evaluation of biological activity of quantum dots in a microsystem

The presented work aimed at systematic investigation of biological activity of CdSex S1- x /ZnS and CdSe/ZnS quantum dots (QDs), whose surface was modified with different ligands. For these studies, we used a microfluidic system combined with fluorescence microscopy techniques, which enabled analysis of cells' morphology, viability, and QDs uptake. PDMS and glass-based microfluidic system enabled the precise control of the cell environment, allowed to examine five replications of each tested QDs concentrations (statistically significant number), monitor multiple cellular events, and avoid manual preparation of QDs dilutions. We investigated the influence of the core composition and the type of surface modifiers on QDs toxicity. We also determined whether the examined nanoparticles penetrate into the cells. For all tested nanoparticles, the decrease of cells' viability was observed when increasing nanoparticles concentration. The decrease of live cells' number in microchambers and the accumulation of the nanoparticles around cultured cells were observed. The effect of hydrocarbon chain length of surface modifiers and QDs core composition on the cell viability was confirmed in our tests.

The distribution and degradation of radiolabeled superparamagnetic iron oxide nanoparticles and quantum dots in mice

(51)Cr-labeled, superparamagnetic, iron oxide nanoparticles ((51)Cr-SPIOs) and (65)Zn-labeled CdSe/CdS/ZnS-quantum dots ((65)Zn-Qdots) were prepared using an easy, on demand, exchange-labeling technique and their particokinetic parameters were studied in mice after intravenous injection. The results indicate that the application of these heterologous isotopes can be used to successfully mark the nanoparticles during initial distribution and organ uptake, although the (65)Zn-label appeared not to be fully stable. As the degradation of the nanoparticles takes place, the individual transport mechanisms for the different isotopes must be carefully taken into account. Although this variation in transport paths can bring new insights with regard to the respective trace element homeostasis, it can also limit the relevance of such trace material-based approaches in nanobioscience. By monitoring (51)Cr-SPIOs after oral gavage, the gastrointestinal non-absorption of intact SPIOs in a hydrophilic or lipophilic surrounding was measured in mice with such high sensitivity for the first time. After intravenous injection, polymer-coated, (65)Zn-Qdots were mainly taken up by the liver and spleen, which was different from that of ionic (65)ZnCl2. Following the label for 4 weeks, an indication of substantial degradation of the nanoparticles and the release of the label into the Zn pool was observed. Confocal microscopy of rat liver cryosections (prepared 2 h after intravenous injection of polymer-coated Qdots) revealed a colocalization with markers for Kupffer cells and liver sinusoidal endothelial cells (LSEC), but not with hepatocytes. In J774 macrophages, fluorescent Qdots were found colocalized with lysosomal markers. After 24 h, no signs of degradation could be detected. However, after 12 weeks, no fluorescent nanoparticles could be detected in the liver cryosections, which would confirm our (65)Zn data showing a substantial degradation of the polymer-coated CdSe/CdS/ZnS-Qdots in the liver.

Chip based single cell analysis for nanotoxicity assessment

Nanomaterials, because of their tunable properties and performances, have been utilized extensively in everyday life related consumable products and technology. On exposure, beyond the physiological range, nanomaterials cause health risks via affecting the function of organisms, genomic systems, and even the central nervous system. Thus, new analytical approaches for nanotoxicity assessment to verify the feasibility of nanomaterials for future use are in demand. The conventional analytical techniques, such as spectrophotometric assay-based techniques, usually require a lengthy and time-consuming process and often produce false positives, and often cannot be implemented at a single cell level measurement for studying cell behavior without interference from its surrounding environment. Hence, there is a demand for a precise, accurate, sensitive assessment for toxicity using single cells. Recently, due to the advantages of automation of fluids and minimization of human errors, the integration of a cell-on-a-chip (CoC) with a microfluidic system is in practice for nanotoxicity assessments. This review explains nanotoxicity and its assessment approaches with advantages/limitations and new approaches to overcome the confines of traditional techniques. Recent advances in nanotoxicity assessment using a CoC integrated with a microfluidic system are also discussed in this review, which may be of use for nanotoxicity assessment and diagnostics.

A novel microfluidic platform with stable concentration gradient for on chip cell culture and screening assays

In this work a novel microfluidic platform for cell culture and assay is developed. On the chip a static cell culture region is coupled with dynamic fluidic nutrition supply structures. The cell culture unit has a sandwich structure with liquid channels on the top, the cell culture reservoir in the middle and gas channels on the bottom. Samples can be easily loaded into the reservoir and exchange constantly with the external liquid environment by diffusion. Since the flow direction is perpendicular to the liquid channel on the top of the reservoir, the cells in the reservoir are shielded from shear-force. By assembling the basic units into an array, a steady concentration gradient can be generated. Cell culture models both for continuous perfusion and one-off perfusion were established on the chip. Both adherent and suspended cells were successfully cultured on the chip in 2D and 3D culture modes. After culturing, the trapped cells were recovered for use in a later assay. As a competitive candidate for a standard cell culture and assay platform, this chip is also adaptable for cytotoxicity and cell growth assays.

Microdevices for nanomedicine

This review surveys selected methods of manufacture and applications of microdevices-miniaturized functional devices capable of handling cell and tissue cultures or producing particles-and discusses their potential relevance to nanomedicine. Many characteristics of microdevices such as miniaturization, increased throughput, and the ability to mimic organ-specific microenvironments are promising for the rapid, low-cost evaluation of the efficacy and toxicity of nanomaterials. Their potential to accurately reproduce the physiological environments that occur in vivo could reduce dependence on animal models in pharmacological testing. Technologies in microfabrications and microfluidics are widely applicable for nanomaterial synthesis and for the development of diagnostic devices. Although the use of microdevices in nanomedicine is still in its infancy, these technologies show promise for enhancing fundamental and applied research in nanomedicine.

Spectral cross-correlation as a supervised approach for the analysis of complex Raman datasets: the case of nanoparticles in biological cells

Spectral cross-correlation is introduced as a methodology to identify the presence and subcellular distribution of nanoparticles in cells. Raman microscopy is employed to spectroscopically image biological cells previously exposed to polystyrene nanoparticles, as a model for the study of nano-bio interactions. The limitations of previously deployed strategies of K-means clustering analysis and principal component analysis are discussed and a novel methodology of spectral cross-correlation analysis is introduced and compared with the performance of classical least squares analysis, in both unsupervised and supervised modes. The previous study demonstrated the feasibility of using Raman spectroscopy to map cells and identify polystyrene nanoparticles in a lipid rich environment, which is suggestive of the membrane rich endoplasmic reticulum. However, short comings in identification of all nanoparticle signatures in the cell using K-means clustering are apparent, as highlighted by principal component analysis of the identified clusters which demonstrates that K-means clustering does not identify all regions where spectral signatures of the nanoparticles are evident. Thus, two more sophisticated analytical approaches to the extraction of the nanoparticle signatures from the Raman spectral datasets, namely classical least squares analysis and cross-correlation analysis, were employed and are demonstrated to improve the identification of spectroscopic signatures characteristic of polystyrene nanoparticles in a cellular environment. Additionally, to investigate the local biochemical environment in which the nanoparticles are trafficked, a pure spectrum of 3-sn-phosphatidyl ethanolamine was cross-correlated against the Raman dataset, further suggesting the particles are indeed localized in a lipid rich environment. Furthermore, to demonstrate the robustness and versatility of the analysis method, a spectrum of pure RNA was used to demonstrate that a differentiation could be made between DNA of the nucleus and RNA of the nucleolus using the supervised spectral cross-correlation technique.