Highly sensitive hydrogen sulfide (H₂S) gas sensors from viral-templated nanocrystalline gold nanowires

Revisiting the IR Spectra of H2S in an Argon Matrix: Identification of (H2S)n (n ≤ 4) Clusters via the Spectral Assignment of νS-H Transitions

Small-molecular clusters of H2S up to tetramer have been experimentally identified in a cold and solid argon matrix by the spectral assignment of νS-H fundamental transitions for different H2S:argon mixing ratios. Normal-mode frequency calculations at the MP2-CP/aug-cc-pV(Q + d)Z level have been used to support the spectral assignments. In addition, modulations in relative populations of different clusters due to the annealing of the deposited matrix and the preheating of the H2S-argon gas mixture before deposition reinforced the spectral assignments. Variations in mixing ratio, annealing of the matrix, and preheating of the gas mixture have also been used, in a combined manner, to unambiguously identify the ν1 and ν3 bands of the H2S monomer, which has been a matter of dispute for a long period. The two bands have been identified at 2634.4 and 2648.0 cm-1, respectively, while three bands at 2581.5, 2568.4, and 2547.6 cm-1 have been assigned to H-bonded dimers, cyclic trimers, and cyclic tetramers, respectively. Multiple bands within 2550-2580 cm-1 have been assigned to caged tetramers. The cooperative strengthening of S-H···S H bonds in cyclic H2S clusters was evident from the linear increment in νS-H spectral shifts with cluster size.

Single Side-Chain-Modulatory of Hemicyanine for Optimized Fluorescence and Photoacoustic Dual-Modality Imaging of H2S In Vivo

Near-infrared fluorescence (NIRF)/photoacoustic (PA) dual-modality imaging integrated high-sensitivity fluorescence imaging with deep-penetration PA imaging has been recognized as a reliable tool for disease detection and diagnosis. However, it remains an immense challenge for a molecule probe to achieve the optimal NIRF and PA imaging by adjusting the energy allocation between radiative transition and nonradiative transition. Herein, a simple but effective strategy is reported to engineer a NIRF/PA dual-modality probe (Cl-HDN3) based on the near-infrared hemicyanine scaffold to optimize the energy allocation between radiative and nonradiative transition. Upon activation by H2S, the Cl-HDN3 shows a 3.6-fold enhancement in the PA signal and a 4.3-fold enhancement in the fluorescence signal. To achieve the sensitive and selective detection of H2S in vivo, the Cl-HDN3 is encapsulated within an amphiphilic lipid (DSPE-PEG2000) to form the Cl-HDN3-LP, which can successfully map the changes of H2S in a tumor-bearing mouse model with the NIRF/PA dual-modality imaging. This work presents a promising strategy for optimizing fluorescence and PA effects in a molecule probe, which may be extended to the NIRF/PA dual-modality imaging of other disease-relevant biomarkers.

Detection of PPB-Level H2S Concentrations in Exhaled Breath Using Au Nanosheet Sensors with Small Variability, High Selectivity, and Long-Term Stability

The continuous monitoring of hydrogen sulfide (H2S) in exhaled breath enables the detection of health issues such as halitosis and gastrointestinal problems. However, H2S sensors with high selectivity and parts per billion-level detection capability, which are essential for breath analysis, and facile fabrication processes for their integration with other devices are lacking. In this study, we demonstrated Au nanosheet H2S sensors with high selectivity, ppb-level detection capability, and high uniformity by optimizing their fabrication processes: (1) insertion of titanium nitride (TiN) as an adhesion layer to prevent Au agglomeration on the oxide substrate and (2) N2 annealing to improve nanosheet crystallinity. The fabricated Au nanosheets successfully detected H2S at concentrations as low as 5.6 ppb, and the estimated limit of detection was 0.5 ppb, which is superior to that of the human nose (8-13 ppb). In addition, the sensors detected H2S in the exhaled breath of simulated patients at concentrations as low as 175 ppb while showing high selectivity against interfering molecules, such as H2, alcohols, and humidity. Since Au nanosheets with uniform sensor characteristics enable easy device integration, the proposed sensor will be useful for facile health checkups based on breath analysis upon its integration into mobile devices.

Gold Nanowires from Nanorods

Gold nanowires (AuNWs) possess strong potential application in micro- and nanoelectronics as well as in plasmonic waveguides because of their low electrical resistance. However, the synthesis of pure solvent-dispersible AuNWs with full control over their length still remains a challenge. All the previously reported methods produce AuNWs with other impurities such as smaller nanorods, platelets, and spherical particles and are limited to a certain length (typically below 10 μm). This article describes a one-step synthesis of extremely long AuNWs (up to 25 μm) with great control over their dimensions by using pentahedrally twinned gold nanorods (AuNRs) as seed particles. To induce the AuNW growth, the reduction of Au(I) to Au(0) was carried out on the surface of AuNRs at a very low pH by introducing HCl into the growth solution. The slow conversion of Au(I) to Au(0) due to the increase in reduction potential at lower pH promoted the preferential deposition of metallic gold on the more reactive tips of AuNRs compared to their sides, resulting in the formation of AuNWs. In analogy to the "living" polymerization reaction, the length of the AuNWs was proportional to the amount of Au(I) added to the growth solution; thus, the desired length of AuNWs was achieved by controlling the supply of Au(I) ions in the reaction mixture. The AuNWs longer than 6 μm were found to be responsive to microwave radiation. When an aqueous solution of AuNWs was exposed to microwaves, the formation of sharp kinks was observed in several locations of AuNWs without their disintegration into smaller pieces.

1D Titanium Dioxide: Achievements in Chemical Sensing

For the last two decades, titanium dioxide (TiO₂) has received wide attention in several areas such as in medicine, sensor technology and solar cell industries. TiO₂-based gas sensors have attracted significant attention in past decades due to their excellent physical/chemical properties, low cost and high abundance on Earth. In recent years, more and more efforts have been invested for the further improvement in sensing properties of TiO₂ by implementing new strategies such as growth of TiO₂ in different morphologies. Indeed, in the last five to seven years, 1D nanostructures and heterostructures of TiO₂ have been synthesized using different growth techniques and integrated in chemical/gas sensing. Thus, in this review article, we briefly summarize the most important contributions by different researchers within the last five to seven years in fabrication of 1D nanostructures of TiO₂-based chemical/gas sensors and the different strategies applied for the improvements of their performances. Moreover, the crystal structure of TiO₂, different fabrication techniques used for the growth of TiO₂-based 1D nanostructures, their chemical sensing mechanism and sensing performances towards reducing and oxidizing gases have been discussed in detail.

A covalent organic polymer as an efficient chemosensor for highly selective H2S detection through proton conduction

An interdigitated electrode fabricated with a covalent organic polymer (COP) acts as an efficient H₂S gas sensor at room temperature.

Gas Sensors Based on Chemically Reduced Holey Graphene Oxide Thin Films

The nanosheet stacking phenomenon in graphene thin films significantly deteriorates their gas-sensing performance. This nanosheet stacking issue should be solved and reduced to enhance the gas detection sensitivity. In this study, we report a novel ammonia (NH₃) gas sensor based on holey graphene thin films. The precursors, holey graphene oxide (HGO) nanosheets, were prepared by etching graphene under UV irradiation with Fenton reagent (Fe²⁺/Fe³⁺/H₂O₂). Holey graphene was prepared by the reduction of HGO (rHGO) with pyrrole. Holey graphene thin-film gas sensors were prepared by depositing rHGO suspensions onto the electrodes. The resulting sensing devices show excellent response, sensitivity, and selectivity to NH₃. The resistance change is 2.81% when the NH₃ level is as low as 1 ppm, whereas the resistance change is 11.32% when the NH₃ level is increased to 50 ppm. Furthermore, the rHGO thin-film gas sensor could be quickly restored to their initial states without the stimulation with an IR lamp. In addition, the devices showed excellent repeatability. The resulting rHGO thin-film gas sensor has a great potential for applications in numerous sensing fields because of its low cost, low energy consumption, and outstanding sensing performance.

M13 bacteriophage spheroids as scaffolds for directed synthesis of spiky gold nanostructures

The spherical form (s-form) of a genetically-modified gold-binding M13 bacteriophage was investigated as a scaffold for gold synthesis. Repeated mixing of the phage with chloroform caused a 15-fold contraction from a nearly one micron long filament to an approximately 60 nm diameter spheroid. The geometry of the viral template and the helicity of its major coat protein were monitored throughout the transformation process using electron microscopy and circular dichroism spectroscopy, respectively. The transformed virus, which retained both its gold-binding and mineralization properties, was used to assemble gold colloid clusters and synthesize gold nanostructures. Spheroid-templated gold synthesis products differed in morphology from filament-templated ones. Spike-like structures protruded from the spherical template while isotropic particles developed on the filamentous template. Using inductively coupled plasma-mass spectroscopy (ICP-MS), gold ion adsorption was found to be comparatively high for the gold-binding M13 spheroid, and likely contributed to the dissimilar gold morphology. Template contraction was believed to modify the density, as well as the avidity of gold-binding peptides on the scaffold surface. The use of the s-form of the M13 bacteriophage significantly expands the templating capabilities of this viral platform and introduces the potential for further morphological control of a variety of inorganic material systems.

PVP-coated gold nanoparticles for the selective determination of ochratoxin A via quenching fluorescence of the free aptamer

This paper describes an aptamer/gold nanoparticle-based assay for ochratoxin A (OTA) detection. This assay is based on the use of an aptamer labeled with carboxyfluorescein (FAM) at its 5'-end and gold nanoparticles (AuNPs) that act as quenchers of fluorescence. When OTA is absent in the system, the fluorescently labeled aptamers are adsorbed on the surface of AuNPs. The fluorescence signal of the fluorescein-labeled OTA aptamer generated is quenched by the fluorescence resonance energy transfer effect of AuNPs. When OTA is present in the system, the fluorescently labeled aptamer binds to OTA and forms a folded structure, which can resist the adsorption of AuNPs. Thus, the fluorescent signal can be retained. The detection limit of this sensing platform is 5 nM, and the linear detection range is 10-1000 nM (R2 = 0.994). The procedure was validated by the quantitation of OTA in spiked ginger powder samples and were found to be free of interference by the sample matrix. The recoveries and the relative standard deviation varied from 89.0% to 117.8% and from 1.9% to 6.3%, respectively.

Assembly of Ultrathin Gold Nanowires into Honeycomb Macroporous Pattern Films with High Transparency and Conductivity

Because of its promising properties, honeycomb macroporous pattern (HMP) film has attracted increasing attention. It has been realized in many artificial nanomaterials, but the formation of these HMPs was attributed to templates or polymer/supermolecule/surfactant assistant assembly. Pure metal HMP film has been difficult to produce using a convenient colloidal template-free method. In this report, a unique template-free approach for preparation of Au HMP film with high transparency and conductivity is presented. Ultrathin Au nanowires, considered a linear polymer analogue, are directly assembled into HMP film on various substrates using a traditional static breath figure method. Subsequent chemical cross-linking and oxygen plasma treatment greatly enhance the stability and conductivity of the HMP film. The resulting HMP film exhibits great potential as an ideal candidate for transparent flexible conductive nanodevices.

Phage-Enabled Nanomedicine: From Probes to Therapeutics in Precision Medicine

Both lytic and temperate bacteriophages (phages) can be applied in nanomedicine, in particular, as nanoprobes for precise disease diagnosis and nanotherapeutics for targeted disease treatment. Since phages are bacteria-specific viruses, they do not naturally infect eukaryotic cells and are not toxic to them. They can be genetically engineered to target nanoparticles, cells, tissues, and organs, and can also be modified with functional abiotic nanomaterials for disease diagnosis and treatment. This Review will summarize the current use of phage structures in many aspects of precision nanomedicine, including ultrasensitive biomarker detection, enhanced bioimaging for disease diagnosis, targeted drug and gene delivery, directed stem cell differentiation, accelerated tissue formation, effective vaccination, and nanotherapeutics for targeted disease treatment. We will also propose future directions in the area of phage-based nanomedicines, and discuss the state of phage-based clinical trials.

Bottom-Up Synthesis and Sensor Applications of Biomimetic Nanostructures

The combination of nanotechnology, biology, and bioengineering greatly improved the developments of nanomaterials with unique functions and properties. Biomolecules as the nanoscale building blocks play very important roles for the final formation of functional nanostructures. Many kinds of novel nanostructures have been created by using the bioinspired self-assembly and subsequent binding with various nanoparticles. In this review, we summarized the studies on the fabrications and sensor applications of biomimetic nanostructures. The strategies for creating different bottom-up nanostructures by using biomolecules like DNA, protein, peptide, and virus, as well as microorganisms like bacteria and plant leaf are introduced. In addition, the potential applications of the synthesized biomimetic nanostructures for colorimetry, fluorescence, surface plasmon resonance, surface-enhanced Raman scattering, electrical resistance, electrochemistry, and quartz crystal microbalance sensors are presented. This review will promote the understanding of relationships between biomolecules/microorganisms and functional nanomaterials in one way, and in another way it will guide the design and synthesis of biomimetic nanomaterials with unique properties in the future.

A room temperature hydrogen sulfide gas sensor based on electrospun polyaniline–polyethylene oxide nanofibers directly written on flexible substrates

Electrospun polyaniline–polyethylene oxide nanofibers are directly written on a flexible substrate and utilized for room temperature sensing of hydrogen sulfide.

Bio-inspired synthesis of metal nanomaterials and applications

This critical review focuses on recent advances in the bio-inspired synthesis of metal nanomaterials (MNMs) using microorganisms, viruses, plants, proteins and DNA molecules as well as their applications in various fields. Prospects in the design of bio-inspired MNMs for novel applications are also discussed.

A sensitivity tuneable tetraphenylethene-based fluorescent probe for directly indicating the concentration of hydrogen sulfide

A selective tetraphenylethene-based fluorescent H₂S probe was designed and synthesized, which exhibits tuneable sensitivity and could directly indicate the concentration of H₂S.