Serum-stable quantum dot-protein hybrid nanocapsules for optical bio-imaging

Single-step synthesis of ternary metal chalcogenides (sf-CuInS2 and sf-CuInSe2) stripped off the organic cover and their use as a catalyst for symmetric Glaser-Hay coupling reactions

Generally, inorganic nano/microparticles produced by chemical routes are covered by organic surfactants or polymers to control their agglomeration during their synthesis. However, these surfactants and polymers negatively affect their catalytic activity because these molecules mask the surface. This work presents the synthesis of surfactant-free CuInS2 and CuInSe2 (sf-CuInS2 and sf-CuInSe2) nano/microparticles through simple reactions without surfactant or polymer coatings using LiBH4 under a thermodynamically favourable condition. These reactions are rare observations of a single-step process to produce ternary metal chalcogenides without any template assistance. We have also demonstrated efficient catalysis by sf-CuInS2 nanoparticles in the coupling reaction of substituted phenylacetylenes. We tested it as catalysts in dimerizing 1,3-diyne derivatives while using 8-diazabicyclo[5.4.0]undec-7-ene (DBU) as the base. These Glassar-Hay coupling reactions are conducted at room temperature in acetonitrile (4-7 h, depending on the substrate) using 10 mg of sf-CuInS2. The maximum yield obtained in these reactions is 97%, while the catalyst is reusable for five cycles with little difference in its ability to catalyse. The effectiveness of the catalyst is credited to the availability of a free catalytic surface.

Luminescent copper indium sulfide (CIS) quantum dots for bioimaging applications

Copper indium sulfide (CIS) quantum dots are ideal for bioimaging applications, by being characterized by high molar absorption coefficients throughout the entire visible spectrum, high photoluminescence quantum yield, high tolerance to the presence of lattice defects, emission tunability from the red to the near-infrared spectral region by changing their dimensions and composition, and long lifetimes (hundreds of nanoseconds) enabling time-gated detection to increase signal-to-noise ratio. The present review collects: (i) the most common procedures used to synthesize stable CIS QDs and the possible strategies to enhance their colloidal stability in aqueous environment, a property needed for bioimaging applications; (ii) their photophysical properties and parameters that affect the energy and brightness of their photoluminescence; (iii) toxicity and bioimaging applications of CIS QDs, including tumor targeting, time-gated detection and multimodal imaging, as well as theranostics. Future perspectives are analyzed in view of advantages and potential limitations of CIS QDs compared to most traditional QDs.

Applications of near infrared and surface enhanced Raman scattering techniques in tumor imaging: A short review

Imaging technologies play a vital role in clinical oncology and have undergone massive growth over the past few decades. Research in the field of tumor imaging and biomedical diagnostics requires early detection of physiological alterations so as to provide curative treatment in real time. The objective of this review is to provide an insight about near infrared fluorescence (NIRF) and surface enhanced Raman scattering (SERS) imaging techniques that can be used to expand their capabilities for the early detection and diagnosis of cancer cells. Basic setup, principle and working of the instruments has been provided and common NIRF imaging agents as well as SERS tags are also discussed besides the analytical advantages/disadvantages of these techniques. This review can help researchers working in the field of molecular imaging to design cost effective fluorophores and SERS tags to overcome the limitations of both NIRF as well as SERS imaging technologies.

Subnanomolar FRET-Based DNA Assay Using Thermally Stable Phosphorothioated DNA-Functionalized Quantum Dots

Quantum dots (QDs) can serve as an attractive Förster resonance energy transfer (FRET) donor for DNA assay due to their excellent optical properties. However, the specificity and sensitivity of QD-based FRET analysis are prominently reduced by nonspecific DNA adsorption and poor colloidal stability during DNA hybridization, which hinders the practical applications of QDs as a biosensing platform. Here, we report subnanomolar FRET assay of DNA through the stabilization of DNA/QD interface using DNA-functionalized QDs with phosphorothioated single-stranded DNA (pt-ssDNA) as a multivalent ligand in an aqueous solution. In situ DNA functionalization was achieved during the aqueous synthesis of CdTe/CdS QDs, resulting in the maximum photoluminescence quantum yields of 76.9% at an emission wavelength of 732 nm. Conventional monothiolated ssDNA-capped QDs exhibited particle aggregation and photoluminescence (PL) quenching during DNA hybridization at 70 °C due to the dissociation of surface ligands. Such colloidal instability induced the nonspecific adsorption of DNA, resulting in false-positive signal and decreased sensitivity with the limit of detection (LOD) of 16.1 nM. In contrast, the pt-ssDNA-functionalized QDs maintained their colloidal stability and PL properties at elevated temperatures. The LOD of the pt-ssDNA-functionalized QDs was >30 times lower (0.47 nM) while maintaining the high specificity to a target sequence because the strong multivalent binding of pt-ssDNA to the surface of QDs prevents the detachment of pt-ssDNA and nonspecific adsorption of DNA. The study suggests that the ligand design to stabilize the surface of QDs in an aqueous milieu is critically important for the high performance of QDs for specific DNA assay.

Paclitaxel-induced formation of 3D nanocrystal superlattices within injectable protein-based hybrid nanoparticles

Self-assembly of monodisperse superparamagnetic iron oxide nanocrystals into a close-packed, three-dimensional (3D) superlattice is designed within cross-linked protein-based nanoparticles composed of human serum albumin and polyethylene glycol. The prepared nanoparticles are very stable in serum and exhibit a high T2 relaxivity as well as anti-cancer activity, indicating the practical benefits of ordering nanocrystals.

Cd-free Cu-doped ZnInS/ZnS Core/Shell Nanocrystals: Controlled Synthesis And Photophysical Properties

Here, we report efficient composition-tunable Cu-doped ZnInS/ZnS (core and core/shell) colloidal nanocrystals (CNCs) synthesized by using a colloidal non-injection method. The initial precursors for the synthesis were used in oleate form rather than in powder form, resulting in a nearly defect-free photoluminescence (PL) emission. The change in Zn/In ratio tunes the percentage incorporation of Cu in CNCs. These highly monodisperse Cu-doped ZnInS CNCs having variable Zn/In ratios possess peak emission wavelength tunable from 550 to 650 nm in the visible spectrum. The quantum yield (QY) of these synthesized Cd-free CNCs increases from 6.0 to 65.0% after coating with a ZnS shell. The CNCs possessing emission from a mixed contribution of deep trap and dopant states to only dominant dopant-related Stokes-shifted emission are realized by a careful control of stoichiometric ratio of different reactant precursors during synthesis. The origin of this shift in emission was understood by using steady state and time-resolved fluorescence (TRF) spectroscopy studies. As a proof-of-concept demonstration, these blue excitable Cu-doped ZnInS/ZnS CNCs have been integrated with commercial blue LEDs to generate white-light emission (WLE). The suitable combination of these highly efficient doped CNCs results led to a Commission Internationale de l'Enclairage (CIE) color coordinates of (0.33, 0.31) at a color coordinate temperature (CCT) of 3694 K, with a luminous efficacy of optical radiation (LER) of 170 lm/Wopt and a color rendering index (CRI) of 88.

Strategies for Preparing Albumin-based Nanoparticles for Multifunctional Bioimaging and Drug Delivery

Biosafety is the primary concern in clinical translation of nanomedicine. As an intrinsic ingredient of human blood without immunogenicity and encouraged by its successful clinical application in Abraxane, albumin has been regarded as a promising material to produce nanoparticles for bioimaging and drug delivery. The strategies for synthesizing albumin-based nanoparticles could be generally categorized into five classes: template, nanocarrier, scaffold, stabilizer and albumin-polymer conjugate. This review introduces approaches utilizing albumin in the preparation of nanoparticles and thereby provides scientists with knowledge of goal-driven design on albumin-based nanomedicine.

Compound Copper Chalcogenide Nanocrystals

This review captures the synthesis, assembly, properties, and applications of copper chalcogenide NCs, which have achieved significant research interest in the last decade due to their compositional and structural versatility. The outstanding functional properties of these materials stems from the relationship between their band structure and defect concentration, including charge carrier concentration and electronic conductivity character, which consequently affects their optoelectronic, optical, and plasmonic properties. This, combined with several metastable crystal phases and stoichiometries and the low energy of formation of defects, makes the reproducible synthesis of these materials, with tunable parameters, remarkable. Further to this, the review captures the progress of the hierarchical assembly of these NCs, which bridges the link between their discrete and collective properties. Their ubiquitous application set has cross-cut energy conversion (photovoltaics, photocatalysis, thermoelectrics), energy storage (lithium-ion batteries, hydrogen generation), emissive materials (plasmonics, LEDs, biolabelling), sensors (electrochemical, biochemical), biomedical devices (magnetic resonance imaging, X-ray computer tomography), and medical therapies (photochemothermal therapies, immunotherapy, radiotherapy, and drug delivery). The confluence of advances in the synthesis, assembly, and application of these NCs in the past decade has the potential to significantly impact society, both economically and environmentally.

Synthetic strategies and biomedical applications of I–III–VI ternary quantum dots

In this review, we discuss recent advances of I–III–VI QDs with a major focus on synthesis and biomedical applications; advantages include low toxicity and fluorescent tuning in the biological window.

Conjugation of curcumin-loaded lipid nanoemulsions with cell-penetrating peptides increases their cellular uptake and enhances the anti-inflammatory effects in endothelial cells

OBJECTIVES

To prepare and characterize in vitro and in vivo lipid nanoemulsions (LN) loaded with curcumin (Cm) and functionalized with a cell-penetrating peptide.

METHODS

Curcumin-loaded lipid nanoemulsions (CmLN) functionalized with a nona-arginine peptide (R9-CmLN) have been obtained, characterized and optimized for size, entrapment efficiency and in vitro Cm release. The interaction of R9-CmLN with human endothelial cells (HEC) was investigated using cultured EA.hy926 cells, and in vivo biodistribution studies were performed using C57BL6 mice.

KEY FINDINGS

When used in therapeutically relevant concentration, R9-CmLN have low haemolytic activity, low cytotoxicity on HEC, and show anti-inflammatory effects by reducing the monocytes adhesion to TNF-α activated HEC. Moreover, HEC uptake and internalization of R9-CmLN was significantly higher compared to the non-functionalized CmLN. In vivo biodistribution studies in mice revealed a higher accumulation of R9-CmLN in the liver and the lungs compared to CmLN and the body clearance of the both nanoformulations after 72 h.

CONCLUSIONS

Cell-penetrating peptides-functionalized CmLN have superior characteristics compared to their non-functionalized counterparts: are more efficiently internalized by the cells, produces anti-inflammatory effects in HEC and when administrated intravenously in mice exhibit increased accumulation in the liver and the lungs, suggesting their potential therapeutic applications in different inflammatory pathologies localized in the liver or the lungs.

Aqueous synthesis of color tunable Cu doped Zn–In–S/ZnS nanoparticles in the whole visible region for cellular imaging

Cu doped Zn–In–S/ZnS QDs were synthesized for labeling the cytoplasm and their multiple peak emission mechanisms were proposed.

Fabrication and properties of a supramolecular hybrid hydrogel doped with CdTe quantum dots

A fluorescent supramolecular hydrogel was fabricated based on the host–guest self-assembly between the amphiphilic block copolymer on the CdTe quantum dot (QD) surface and the cyclic oligosaccharide host molecule, α-cyclodextrin (α-CD).