Capacity retention behavior and morphology evolution of SixGe1-x nanoparticles as lithium-ion battery anode

Si1-xGex anode synthesis on plastic films for flexible rechargeable batteries

SiGe is a promising anode material for replacing graphite in next generation thin-film batteries owing to its high theoretical charge/discharge capacity. Metal-induced layer exchange (LE) is a unique technique used for the low-temperature synthesis of SiGe layers on arbitrary substrates. Here, we demonstrate the synthesis of Si_1-xGe_x (x = 0-1) layers on plastic films using Al-induced LE. The resulting SiGe layers exhibited high electrical conductivity (up to 1200 S cm^-1), reflecting the self-organized doping effect of LE. Moreover, the Si_1-xGe_x layer synthesized by the same process was adopted as the anode for the lithium-ion battery. All Si_1-xGe_x anodes showed clear charge/discharge operation and high coulombic efficiency (≥ 97%) after 100 cycles. While the discharge capacities almost reflected the theoretical values at each x at 0.1 C, the capacity degradation with increasing current rate strongly depended on x. Si-rich samples exhibited high initial capacity and low capacity retention, while Ge-rich samples showed contrasting characteristics. In particular, the Si_1-xGe_x layers with x ≥ 0.8 showed excellent current rate performance owing to their high electrical conductivity and low volume expansion, maintaining a high capacity (> 500 mAh g^-1) even at a high current rate (10 C). Thus, we revealed the relationship between SiGe composition and anode characteristics for the SiGe layers formed by LE at low temperatures. These results will pave the way for the next generation of flexible batteries based on SiGe anodes.

Si and Ge-Based Anode Materials for Li-, Na-, and K-Ion Batteries: A Perspective from Structure to Electrochemical Mechanism

Silicon and germanium are among the most promising candidates as anodes for Li-ion batteries, meanwhile their potential application in sodium- and potassium-ion batteries is emerging. The access of their entire potential requires a comprehensive understanding of their electrochemical mechanism. This Review highlights the processes taking place during the alloying reaction of Si and Ge with the alkali ions. Several associated challenges, including the volumetric expansion, particle pulverization, and uncontrolled formation of solid electrolyte interphase layer must be surmounted and different strategies, such as nanostructures and electrode formulation, have been implemented. Additionally, a new approach based on the use of layered Si and Ge-based Zintl phases is presented. The versatility of this new family permits the tuning of their physical and chemical properties for specific applications. For batteries in particular, the layered structure buffers the volume expansion and exhibits an enhanced electronic conductivity, allowing high power applications.

Beads-Milling of Waste Si Sawdust into High-Performance Nanoflakes for Lithium-Ion Batteries

Nowadays, ca. 176,640 tons/year of silicon (Si) (>4N) is manufactured for Si wafers used for semiconductor industry. The production of the highly pure Si wafers inevitably includes very high-temperature steps at 1400–2000 °C, which is energy-consuming and environmentally unfriendly. Inefficiently, ca. 45–55% of such costly Si is lost simply as sawdust in the cutting process. In this work, we develop a cost-effective way to recycle Si sawdust as a high-performance anode material for lithium-ion batteries. By a beads-milling process, nanoflakes with extremely small thickness (15–17 nm) and large diameter (0.2–1 μm) are obtained. The nanoflake framework is transformed into a high-performance porous structure, named wrinkled structure, through a self-organization induced by lithiation/delithiation cycling. Under capacity restriction up to 1200 mAh g⁻¹, the best sample can retain the constant capacity over 800 cycles with a reasonably high coulombic efficiency (98–99.8%).

Simple synthesis of SiGe@C porous microparticles as high-rate anode materials for lithium-ion batteries

We synthesize the PoSiGe@C via the decomposition of Mg₂Si/Mg₂Ge composites, acid pickling and subsequent carbon coating processes, which show excellent cycling and rate performance as anode materials for lithium-ion batteries.

Advances in the Application of Silicon and Germanium Nanowires for High-Performance Lithium-Ion Batteries

Li-alloying materials such as Si and Ge nanowires have emerged as the forerunners to replace the current, relatively low-capacity carbonaceous based Li-ion anodes. Since the initial report of binder-free nanowire electrodes, a vast body of research has been carried out in which the performance and cycle life has significantly progressed. The study of such electrodes has provided invaluable insights into the cycling behavior of Si and Ge, as the effects of repeated lithiation/delithiation on the material can be observed without interference from conductive additives or binders. Here, some of the key developments in this area are looked at, focusing on the problems encountered by Li-alloying electrodes in general (e.g., pulverization, loss of contact with current collector etc.) and how the study of nanowire electrodes has overcome these issues. Some key nanowire studies that have elucidated the consequences of the alloying/dealloying process on the morphology of Si and Ge are also considered, in particular looking at the impact that effects such as pore formation and lithium-assisted welding have on performance. Finally, the challenges for the practical implementation of nanowire anodes within the context of the current understanding of such systems are discussed.

New insights into the electrode mechanism of lithium sulfur batteries via air-free post-test analysis

Schematic models of ball-milled Li₂S cathodes and carbon-coated Li₂S (Li₂S@C) cathodes during charge/discharge cycles.