Surface enhanced Raman scattering of gold nanoparticles supported on copper foil with graphene as a nanometer gap

Flexible Copper Films Modification via Spontaneous Reduction of Aryldiazonium Gold Salts: Unraveling Surface Properties and Energy Profile

In this study, we report the modification of flexible copper films via the spontaneous reduction of aryldiazonium gold salts [X-4-C6H4N≡N]AuCl4 (X═COOH, NO2). The electroless modification involves dipping of flexible copper films in the aryldiazonium gold solutions for a few seconds, under ambient conditions, followed by a washing step with deionized water to obtain a mechanically robust gold-aryl coating. The chemical composition, morphology, electronic structure, and optical properties of the gold-aryl layer and the flexibility of the modified copper films are supported by the results from X-ray photoelectron spectroscopy (XPS), electrochemistry, contact angle, scanning electron microscopy (SEM), and ultraviolet photoelectron spectroscopy (UPS). XPS surface analysis showed metallic gold in addition to C-C, C-O/C-N, and C═O functional groups from the grafted aryls. Cu 2p showed metallic copper as a major component and a small amount of Cu(II) ions. Wettability studies showed that Au-COOH@Cu increased the contact angle of the bare copper films from 68.0 ± 0.7° to 82.0° ± 0.7°, while Au-NO2@Cu increased the contact angle to 134.0° ± 0.3°. UPS energy profile analysis of [HOOC-4-C6H4N≡N]AuCl4 (valence band maximum = 1.91 eV) exhibited greater reducibility than [O2N-4-C6H4N≡N]AuCl4 (valence band maximum = 2.91 eV). The lower ionization potential of [HOOC-4-C6H4N≡N]AuCl4 (IP = 4.33 eV) enhanced the reactivity upon copper film contact, potentially inducing efficient energy level alignment, compared with [O2N-4-C6H4N≡N]AuCl4 (IP = 5.62 eV). UPS results were further supported by electrochemistry investigation which revealed that [HOOC-4-C6H4N≡N]AuCl4 is easily reducible compared with [O2N-4-C6H4N≡N]AuCl4. The findings presented here hold significant implications for developing flexible copper films and pave the way for future advancements in electronic material modification for industrial applications.

Robotic written silver ink on photographic paper for detection of thiram residues in fruits

With the widespread application of pesticide in agriculture, pesticide residues in food have posed serious health risks to human. There is an urgent requirement to detect pesticide residues in food. In this work, a sensitive and effective method was employed to measure thiram residues in fruit using surface-enhanced Raman scattering (SERS) technique. Silver ink was written on photographic paper (AgNPs-photographic paper) directly by robotic writing technique. The AgNPs-photographic paper substrates possessed good SERS activities and high stability among four months. A good linear response between the peaks intensities and the logarithmic concentrations of thiram was obtained with the limit of detection (LOD) of 0.024 ppb. The substrates also exhibited excellent reproducibility with relative standard deviation (RSD) value less than 10% from ten different substrates. SERS mapping was tested to characterize the uniformity of AgNPs-photographic paper, and the RSD value was calculated to be 14.34% at 1377 cm^-1 measured by 120 points. The LOD values of apple and peach juice adulterated with thiram were 0.0024 and 0.024 ppm, respectively. The LOD values of thiram residues on apple and peach peels were both 0.25 ng/cm². It was demonstrated that the substrates prepared by robotic writing technique had great potential for practical application in food safety inspection.

Three-Dimensional Au/Ag Nanoparticle/Crossed Carbon Nanotube SERS Substrate for the Detection of Mixed Toxic Molecules

Research on engineering "hotspots" in the field of surface-enhanced Raman scattering (SERS) is at the forefront of contributing to the best sensing indicators. Currently, there is still an urgent need to design a high-strength and large-scale electric field distribution method in order to obtain an ideal SERS sensor. Here, we designed a three-dimensional (3D) Au/Ag nanoparticle (NP)/crossed carbon nanotube film SERS substrate. The proposed structure formed by the simple preparation process can perfectly coordinate the interaction between the SERS substrates, lasers, and molecules. The denser "hotspots" can be induced and then distributed in holes enclosed by Au/AgNPs and the gaps between them. This process was verified by numerical simulations. The experimental results show that the proposed SERS substrate possesses an excellent sensitivity of 10^-12 M (rhodamine 6G (R6G)), an enhancement factor of 1.60 × 10⁹, and a good signal reproducibility (the relative standard deviation is ~6.03%). We further use a Au/AgNP/crossed CNT substrate to detect complex solutions composed of toxic molecules, which shows that our proposed SERS substrate has a wide range of application potentials, especially in food safety.

Metallic Nanoislands on Graphene for Biomechanical Sensing

This minireview describes a nanomaterial-based multimodal sensor for performing biomechanical measurements. The sensor consists of ultrathin metallic films on single-layer graphene. This composite material exhibits physical properties that neither material possesses alone. For example, the metal, deposited by evaporation at low (≤10 nm) nominal thicknesses, renders the film highly sensitive to mechanical stimuli, which can be detected using electrical (i.e., resistance) and optical (i.e., plasmonic) modalities. The electrical modality, in particular, is capable of resolving deformations as small as 0.0001% engineering strain, or 1 ppm. The electrical and optical responses of the composite films can be tailored by controlling the morphology of the metallic film. This morphology (granular or island-like when deposited onto the graphene) can be tuned using the conditions of deposition, the identity of the substrate beneath the graphene, or even the replacement of the graphene for hexagonal boron nitride (hBN). This material responds to forces produced by a range of physiological structures, from the contractions of heart muscle cells, to the beating of the heart through the skin, to stretching of the skin due to the expansion of the lungs and movement of limbs. Here, we provide an update on recent applications of this material in fields ranging from cardiovascular medicine (by measuring the contractions of 2D monolayers of cardiomyocytes), regenerative medicine (optical measurements of the forces produced by myoblasts), speech pathology and physical therapy (measuring swallowing function in head and neck cancer survivors), lab-on-a-chip devices (using deformation of sidewalls of microfluidic channels to detect transiting objects), and sleep medicine (measuring pulse and respiration with a wearable, unobtrusive device). We also discuss the mechanisms by which these films detect strain.

Nanoislands as plasmonic materials

Subwavelength metal nanoislands thermally dewetted from a thin film emerge as a powerful and cost-effective photonic material, due to the formation of substantially strong nano-gap-based plasmonic hot spots and their simple large-area nanofabrication. Unlike conventional nanostructures, nanoislands dewetted from thin metal films can be formed on a large scale at the wafer level and show substrate-dependent plasmonic phenomena across a broad spectral range from ultraviolet to infrared. Substrate-selective dewetting methods for metal nanoislands enable diverse nanophotonic and optoelectronic technologies, underlining mechanical, structural, and material properties of a substrate. Emerging bioplasmonic technology using metal nanoislands also serves as a high-throughput and surface-sensitive analytical technique with wide-ranging application in rapid, real-time, and point-of-care medical diagnostics. This review introduces an assortment of dewetting fabrication methods for metal nanoislands on distinct substrates from glass to cellulose fibers and provides novel findings for metal nanoislands on a substrate by three-dimensional numerical modeling. Furthermore, the plasmonic properties of metal nanoislands and recent examples for their photonic applications, in particular, biological sensing, are technically summarized and discussed.

Observation of Wavelength-Dependent Quantum Plasmon Tunneling with Varying the Thickness of Graphene Spacer

Plasmonic coupling provides a highly localized electromagnetic field in the gap of noble metals when illuminated by a light. The plasmonic field enhancement is generally known to be inversely proportional to the gap distance. Given such a relation, reducing the gap distance appears to be necessary to achieve the highest possible field enhancement. At the sub-nanometer scale, however, quantum mechanical effects have to be considered in relation to plasmonic coupling. Here, we use graphene as a spacer to observe plasmonic field enhancement in sub-nanometer gap. The gap distance is precisely controlled by the number of stacked graphene layers. We propose that the sudden drop of field enhancement for the single layer spacer is originated from the plasmon tunneling through the thin spacer. Numerical simulation which incorporates quantum tunneling is also performed to support the experimental results. From the fact that field enhancement with respect to the number of graphene layers exhibits different behavior in two wavelengths corresponding to on- and off-resonance conditions, tunneling phenomenon is thought to destroy the resonance conditions of plasmonic coupling.

Nanocracking and metallization doubly defined large-scale 3D plasmonic sub-10 nm-gap arrays as extremely sensitive SERS substrates

Considering the technological difficulties in the existing approaches to form nanoscale gaps, a convenient method to fabricate three-dimensional (3D) sub-10 nm Ag/SiN_x gap arrays has been demonstrated in this study, controlled by a combination of stress-induced nanocracking of a SiN_x nanobridge and Ag nanofilm deposition. This scalable 3D plasmonic nanogap is specially suspended above a substrate, having a tunable nanogap width and large height-to-width ratio to form a nanocavity underneath. As a surface-enhanced Raman scattering (SERS) substrate, the 3D Ag/SiN_x nanogap shows a large Raman enhancement factor of ∼10⁸ and extremely high sensitivity for the detection of Rhodamine 6G (R6G) molecules, even down to 10^-16 M, indicating an extraordinary capability for single-molecule detection. Further, we verified that the Fabry-Perot resonance occurred in the deep SiN_x nanocavity under the Ag nanogap and contributed prominently to a tremendous enhancement of the local field in the Ag-nanogap zone and hence ultrasensitive SERS detection. This method circumvents the technological limitations to fabricate a sub-10 nm metal nanogap with unique features for wide applications in important scientific and technological areas.

Sensitive Surface-Enhanced Raman Scattering Detection Using On-Demand Postassembled Particle-on-Film Structure

Highly sensitive and low-cost surface-enhanced Raman scattering (SERS) substrates are essential for practical applications of SERS. In this work, we report an extremely simple but effective approach to achieve sensitive SERS detection of molecules (down to 10^-10 M) by using a particle/molecule/film sandwich configuration. Compared to conventional SERS substrates which are preprepared to absorb analyte molecules for detection, the proposed sandwich configuration is achieved by postassembling a flexible transparent gel tape embedded with plasmonic nanoparticles onto an Au film decorated with to-be-detected analyte molecules. In such a configuration, the individual plasmonic gel tape and Au film have low or no SERS activity but the final assembled sandwich structure shows strong SERS signal due to the formation of numerous hot spots at the particle-film interface, where the analyte molecules themselves serve as both spacer and signal probes. Because of its simple configuration, we demonstrate that the proposed SERS substrate can be obtained over a large area with extremely low cost. Particularly, because of the on-demand nature and the flexibility, such a postassembly strategy provides an ideal solution to detect the pesticide residue on fruit surfaces with significantly enhanced sensitivity.

Ag gyrus-nanostructure supported on graphene/Au film with nanometer gap for ideal surface enhanced Raman scattering

The physical phenomenon, surface-enhanced Raman scattering (SERS), is mainly based on the local electromagnetic fields enhancement located at the nano-gaps between metal nanostructures attributed to localized surface plasmon resonance. Therefore, nano-gaps are very important for obtaining high-density hot spots and optimal and uniform SERS signals. However, it remains a challenge to form the three-dimensional ultra-narrow nano-gaps. Here, a gyrus-inspired Gyrus-SERS substrate was fabricated with the nanostructure of Ag gyrus/graphene/Au film using an extremely simple method. The lateral and vertical hot spots respectively were obtained from the dense nano-gaps (~3 nm) between gyrus and the coupling of Ag gyrus and Au film in bilayer graphene nano-gaps (0.68 nm), which were demonstrated in experiment and theory. The proposed Gyrus-SERS platform performs an excellent SERS activity (EF~5 × 10⁹), high sensitivity (the minimum detected concentration of R6G and CV respectively is 10^-13 and 10^-12 M), and outstanding reproducibility (RSD~7.11%). For practical application, the in situ detection of Malachite green (MG) residue on prawn skin was executed using the prepared flexible Gyrus-SERS substrate, which shows the wide potential in food safety field.

Metallic nanoislands on graphene: A metamaterial for chemical, mechanical, optical, and biological applications

Graphene decorated with metallic nanoparticles exhibits electronic, optical, and mechanical properties that neither the graphene nor the metal possess alone. These composite films have electrical conductivity and optical properties that can be modulated by a range of physical, chemical, and biological signals. Such properties are controlled by the morphology of the nanoisland films, which can be deposited on graphene using a variety of techniques, including in situ chemical synthesis and physical vapor deposition. These techniques produce non-random (though loosely defined) morphologies, but can be combined with lithography to generate deterministic patterns. Applications of these composite films include chemical sensing and catalysis, energy storage and transport (including photoconductivity), mechanical sensing (using a highly sensitive piezroresistive effect), optical sensing (including so-called "piezoplasmonic" effects), and cellular biophysics (i.e sensing the contractions of cardiomyocytes and myoblasts).