Optimum design of electrode structure and parameters in electrical impedance tomography

Sensitivity volume as figure-of-merit for maximizing data importance in electrical impedance tomography

Objective.Electrical impedance tomography (EIT) is a noninvasive imaging method whereby electrical measurements on the periphery of a heterogeneous conductor are inverted to map its internal conductivity. The EIT method proposed here aims to improve computational speed and noise tolerance by introducing sensitivity volume as a figure-of-merit for comparing EIT measurement protocols.Approach.Each measurement is shown to correspond to a sensitivity vector in model space, such that the set of measurements, in turn, corresponds to a set of vectors that subtend a sensitivity volume in model space. A maximal sensitivity volume identifies the measurement protocol with the greatest sensitivity and greatest mutual orthogonality. A distinguishability criterion is generalized to quantify the increased noise tolerance of high sensitivity measurements.Main result.The sensitivity volume method allows the model space dimension to be minimized to match that of the data space, and the data importance to be increased within an expanded space of measurements defined by an increased number of contacts.Significance.The reduction in model space dimension is shown to increasecomputational efficiency, accelerating tomographic inversion by several orders of magnitude, while the enhanced sensitivitytolerates higher noiselevels up to several orders of magnitude larger than standard methods.

Performance evaluation of electrode design and material for a large animal electrical impedance tomography belt

BACKGROUND

Electrical impedance tomography (EIT) produces lung ventilation images via a thoracic electrode belt. Robust electrode design and material, providing low electrode skin contact impedance (SCI), is needed in veterinary medicine. The aim of this study was to compare three EIT electrode designs and materials.

METHODS

Simulations of cylindrical, rectangular and spiked electrode designs were used to evaluate electrode SCI as a function of electrode size, where skin contact was uneven. Gold-plated washers (E_GW ), zinc-plated rivets (E_ZR ) and zinc-galvanised spikes (E_ZS ) were assigned randomly on two interconnected EIT belts. Gel was applied to the cranial or caudal belt and placed on 17 standing cattle. SCI was recorded at baseline and 3, 5, 7, 9 and 11 minutes later.

RESULTS

Simulations that involved electrodes with a greater skin contact area had lower and more uniform SCI. In cattle, SCI decreased with all electrodes over time (p < 0.01). Without gel, no difference was found between E_GW and E_ZS , while SCI was higher for E_ZR (p < 0.03). With gel, SCI was lower in E_GW and E_ZR (p < 0.026), with the SCI in E_GW being the lowest (p < 0.01).

LIMITATIONS

Low numbers of animals and static electrode position may affect SCI.

CONCLUSIONS

Electrode design is important for EIT measurement, with larger electrode designs able to compensate for the use of less conductive materials. Gel is not necessary to achieve acceptable SCI in large animals.

Simulation of effects of the electrode structure and material in the density measuring system of the peripheral nerve based on micro-electrical impedance tomography

The electrode structure in micro-electrical impedance tomography (MEIT) highly influences the measurement sensitivity and therefore the reconstructed image quality. Hence, optimizing the electrode structure leads to the improvement of image quality in the reconstruction procedure. Although there have been many investigations on electrical impedance tomography (EIT) electrodes, there is no comprehensive study on their influence on images of the peripheral nerve. In this paper, we present a simulation method to study the effects of the electrode structure in the density measurement system of the peripheral nerve based on MEIT. The influence of the electrode structure such as dimensions, material and the number of electrodes and also the recognition feature of different radii of fascicle and different locations of fascicles has been studied. Data were reconstructed from the real and imaginary parts of complex conductivity data, respectively. It has been shown that the material of the electrodes had no effect on the reconstructed images, while the dimensions of the electrodes significantly affected the image sensitivity and thus the image quality. An increase in the number of electrodes increased the amount of data and information content. However, as the number of electrodes increased due to the given perimeter of the peripheral nerve, the area of the electrodes was reduced. This reduction affects the reconstructed image quality. The real and imaginary parts of the data were separately reconstructed for each case. Although, in real EIT systems, the reconstructed images using the real part of the signal have a better signal-to-noise ratio (SNR), this study proved that for a density measuring system of the peripheral nerve, the reconstructed images using the imaginary part of the signal had better quality. This simulation study proposes the effects of the electrode size and material and obtained spatial resolution that was high enough to reconstruct fascicles in a peripheral nerve.

Fully Parallel Electrical Impedance Tomography Using Code Division Multiplexing

Electrical Impedance Tomography (EIT) has been dominated by the use of Time Division Multiplexing (TDM) and Frequency Division Multiplexing (FDM) as methods of achieving orthogonal injection of excitation signals. Code Division Multiplexing (CDM), presented in this paper is an alternative that eliminates temporal data inconsistencies of TDM for fast changing systems. Furthermore, this approach eliminates data inconsistencies that arise in FDM when frequency bands of current injecting electrodes are chosen over frequencies that have large changes in the imaged object's impedance. To the authors knowledge no fully functional wideband system or simulation platform using simultaneous injection of Gold codes currents has been reported. In this paper, we formulate, simulate and develop a fully functional pseudo-random (Gold) code driven EIT system with 15 excitation currents and 16 separate voltage measurement electrodes. In the work we verify the use of CDM as a multiplexing modality in simultaneous injection EIT, using a prototype system with an overall bandwidth of 15 kHz, and attainable speed of 462 frames/s using codes with a period of 31 chips. Simulations and experiments are performed using the Electrical Impedance and Diffuse Optics Reconstruction Software (EIDORS). We also propose the use of image processing on reconstructed images to establish their quality quantitatively without access to raw reconstruction data. The results of this study show that CDM can be successfully used in EIT, and gives results of similar visual quality to TDM and FDM. Achieved performance shows average position error of 3.5% and size error of 6.2%.

Electrical impedance tomography measuring gastric emptying and gastric motility

Electrical impedance tomography (EIT) is a novel medical imaging technology, which comes forth in recent 20 years following morphology imaging and structure imaging. EIT has the outstanding advantages of noninvasive, functional imaging and medical image monitoring. It has been mostly used in gastroenterology to assess flow of ingesta through the gastric region as an alternative to radionuclide studies. In vitro, EIT can accurately measure the volume of glass rods/balloons in a phantom. In humans, EIT can accurately measure gastric volume (balloons) in experimental conditions. Gastric emptying measurement of EIT has good correlations with dye dilution, gastric residuals and scintigraphy. By electrode array located on body surface, gastric motility measurement using EIT realizes noninvasive measurement and directly displays shrink and motility conditions of stomach in body by images of real time. This is going to be a great progress of gastric motility measurement and evaluation method. EIT gastric motility measurement has shown seductive application prospect.